Serialzn profile and material number table

Hi ,
I would like to search materials with serializn profile maintained . Although MARA has both fields I am not getting data output however I am able to see a materialwith ser.profile in mm03 transaction ..
I nee a table where mat and ser.profile is stored .
Regards
Narasimha

Use table MARC - field name -SERNPfor serialisationprofile & MATNR for material
You can pass the value of serialisation profile in field SERNP & fetch the material nos from this table
shakti
Edited by: SHAKTI BEHERA on Feb 24, 2012 7:48 AM

Similar Messages

Map BATCH number corresponding to ORDER number and Material number .

hi all,
i want to map the BATCH number corresponding to Material Number .
i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
but the batch number column is blank for all .
and in case of table MCHA , these is assigned batch number to every Material number .
also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
so please suggest me the Possible way to resolve this .....
sunny

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

How change plant, net price, OPu, and Material Number from ME32K

Hi GURUs,
May let me know how I should configure ME32K in order to allow users to change:
- Material Number
- Net Price
- Order Purchasing Unit
- Plant
I have tried setting up field selections layout properly, even debug PBO, it is still greyed out for those fields.
Please help.
Thanks,
Tony Yuwono

there is no way to change the price in item overview in the contract.
The reason is explained in OSS note 685117.
........The problem is that Scales and/or validity periods may exist for the conditions, because contracts have time dependant conditions, just like info records do.
This is in contrast to e.g. Purchase orders which have Time independant conditions and so, NO scales nor validity periods.
A Purchase order has A price! The price maybe determined based on a source; a contract or an info record. Depending on the order quantity and the date, the PO price is determined.
The contract does not have A date, it might have several; indicated by the validity periods. Furthermore the price is dependant on eventual scales. Therefore it does not have A price either..........

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Product ID and Material Number mapping

Hi All,
I would like to request for your help on this.
How can I be able to find the material number in R/3 using the product ID in CRM?
Currently, I am using the description of the Product to search in R/3 but that is not always the case.
Is there a mapping in CRM to find the corresponding material number in R/3?
Thank you very much!
Best Regards.

Hello,
material Number in R/3 should be equal to Product ID in CRM i.e
COMM_PRODUCT-PRODUCT_ID = MARA-MATNR (Table_Name-Field_Name)
Hope this helps!
Best Regards,
Shanthala Kudva.

LINK BETWEEN BUSINESS AREA AND MATERIAL NUMBER

Hello EXPERTS,
I have a report based on a custom table .The custom table contains company code, materials and their date run as primary keys.
In the selection screen I am having one field business area, based upon the value entered in the selection screen in business area field I have to retrieve the corresponding materials.
I want to know the relation between business area and materials ( resp. tables and primary keys)
Plz any one guide me on this ...
SRI

hi ARS,
Can u be more specific
based upon the business area I have to retrieve materials... the report which I generated is based upon only one custom table. In selection screen I am having business area field but it is not existing in the custom table...
can any one guide me to solve this problem...
SRI

Lexicographic flag setup and material number range change

Hi gurus,
got the following situation:
AS IS:
Tcode MMNR: Number range for material master part number: AAAAAAAAAAAAAAAAAA to ZZZZZZZZZZZZZZZZZZ (lenght 18, external assignment)
Tcode OMSL: Lexicographic flag IS NOT setup
Tcode OMS2: For all material types flag "External no. assignment w/o check" IS SETUP
Basically we can't create numeric only part numbers.
The new requirement is to be able to create numeric part numbers like:
1234
12345
0123
01234 (where the leading zero is a significant character for the part number)
By doing the following changes:
MMNR: change number range 000000000000000000 to ZZZZZZZZZZZZZZZZZZ
OMSL: setup lexicographic AND leading zeros flag
OMS2: clear flag for External no. assignment w/o check
I see I do achieve the result: numeric part numbers can be created, leading zeros are managed in the correct way and all numeric part numbers are LEFT-aligned, so looking to MARA you would see part numbers like this:
00012345
012345
012345V
09CATALIST1
0AFVAU0001
12345
23225V
23243V
2SIMBACK3210
I did already tried all the above changes in the quality system, then created a numeric part number and an alfanumeric part number, for both of them did create a PO, Inbound delivery, posted MIGO, created a sales order, outbound delivery, PGIed without any issue, stock was displayed and managed correctly by the system, same for material docs.
We already thought about BW, so in case we do the changes BW would be ok.
Apparently everything is fine so I should go for the production system BUT........ in my mind I'm thinking that OMSL Tcode is usually setup day 1 of an Sap project and then usually you forget it... I have the fear that even if everything looks fine (and Sap allows me to change the customizing), I'm going to muck up the system...
Have you ever had the same to do ? I already saw posts similar to this one but already existing conditions were different so to me this case looks like unique so far..
Any help, suggestion, whatever will be highly appreciated, especially cause I have to take a decision by tomorrow morning
Many thanks in advance !!
Enrico
Edited by: Matt on Aug 13, 2011 7:39 AM - profanity removed

As you never had numeric numbers, it should not create a big problem.
I am working in a system with lexicographical setting in use.
But you have to keep in mind that your sort sequence is quite different to numeric numbers, like this:
1
10
11
12
2
3
31
311123
32
32012
4
And you may get the one or other issue if you download material numbers to Excel, with wrong settings you will loose your leading zeros.
A similar effect happens most of the time if user not very familiar with Excel give you a file for an upload, as this often is prepared without leading zeros, which could cause a load to the wrong material if the remaining number would be a duplicate:
0123 and 123
Of course is a selection by number range not that easy as it is with numeric numbers. Usingthe first example a range from 1 to 3 includes materials 10, 11 and 12 as well

Partner profile and partner number in output of order/invoice.

Hello Experts,
I want to know how system pick partner profile from output type triggered in sales order/invoice??
I could see partner profile is different from partner number exist in output triggered in sales order/invoice.
I want to know the triggering point of idoc from SO/invoice.
Thanks

The phrase "ouptut goes to partner" indicates that the partner will be recipient of the output type. E.g., ship-to partner will be the recipient of the delivery and the delivery note.
The use of an output partner in the output condition record is used to control the output device used in the output determination - a completely separate issue.
Unless you are (e.g.) using different printers for outputs which will be sent to different partners, you would likely be better off using a more generic access for your output condition records.
HTH
James

Link of material number to table IBIN

Dear All,
I am looking for the link to establish relation between material number & table IBIN.
Please help in this regard...
Mimiri

You can find the the materialnumber in table IBINOWN, field OBJKEY. Note: the filed OBJKEY may hold MATNR and WERKS, this depends on where the variant configuration is set (plant level or material level).
The relation between IBIN and IBINOWN is set by the field INSTANCE.
There is a materialnumber in IBIN (field OBJNR) but that field holds the reference to the configurable materialnumber.
Edited by: Maen Anachronos on Sep 24, 2010 2:06 PM

Identification of old material number at plant level

Dear All,
We are implementing SAP for two hospitals. In legacy system each hospital as its own material master and material number. Now in SAP each hospital we are treating as a plant. These two plants are assigned to one company code.
So it means that there will be one unique material number for two hospitals. Now business wants their old material number (which is maintained differently for two Hospitals) at plant level in search functionality
How can I achieve with material master
Regards
Subhash

create a class "OLDMAT" for old material number with CL03 for class type 001
define a characteristic for old material number for each plant with CT04 and assign it to the class (can as well be done from within CL03). name it e.g. OLDMXXXX (XXXX = plant number)
in MM01 select classification view and add the class. after you hit enter you get the fields to add the old material numbers
Standard F4 help for a material number allows then to search for a material number by classification.

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

Use material number with profile serial number in SRM

Hello,
I created a material number in the back-end and I transfered it to the
SRM.
After creating and approving the PO with that material number, I tried to
create a confirmation in the SRM and I got the error message:
"Maintain serial numbers for total quantity".
I do not have an a suitable field in the SRM.
Please advice.
Best Regards
Eyal Weinreb
HP

check it up in ECC.
even if you do MIGO, you will get same erro message.
Note 1278707 - BAPI_GOODSMVT_CREATE: Message M7 175 during goods receipt
You are using BAPI_GOODSMVT_CREATE to perform a goods receipt posting for a subcontracting purchase order where the materials being received are serial number managed. The BAPI incorrectly returns the error message M7 175 (Maintain serial numbers for total quantity) even though the correct number of serial numbers are being passed over in the parameter table GOODSMVT_SERIALNUMBER. This error also occurs when the serial numbers should be automatically created during the goods receipt posting (controlled by the field SERIALNO_AUTO_NUMBERASSIGNMENT in the table GOODSMVT_ITEM).
Note 1337306 - Goods receipt for stock transport order with serial numbers
In transaction MIGO, you post a goods receipt for stock transport orders for a material with serial number requirement and the system issues error message M7 175: "Maintain serial numbers for total quantity". On the "Serial Numbers" tab page, all you are told is that the item is not relevant for serial numbers. You are therefore unable to maintain serial numbers, even though there is a serial number requirement for this transaction/event. You can post the goods receipt in transaction MB01.
IEN 166 Maintain serial numbers for total quantity
M7 175 Maintain serial numbers for total quantity

Finding goods receipt document and serial number of a material

Hello,
The issue is that I look for an easier way of finding serial numbers which are entered while posting goods receipt of the goods. Then the material is put away into a storage bin. Each sales order position has a project element which is assigned to a sales order position (not to a serial number). When warehouse employee needs to pick the goods in the outbound delivery, he has to type in serial numbers. In MB51, it is possible to search for the GR material document but it can be quite difficult to find it too.
Does anyone have an idea how to find the GR document of a sales order position? Do I need to build up a query with tables containing information about GR, outbound delivery and project element ?
Thanks a lot.
Esra

hi
good
yes you can use this table
EQUI->
Material Number->MATNR
Plant ->WERK
Storage Location->LAGER
Manufacturer Serial Number ->SERGE
Thanks
mrutyun^

How to get ATINN value based on material number and Class Type ?

I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
-Obtain the batch characterstic value for the Material******************
SELECT atwrt
    UP TO 1 ROWS
    INTO v_charvalue
    FROM ausp
   WHERE objek = mcha-matnr
     AND atinn = '0000000381'   " 'US80_FRENCH_ON_LABEL'
     AND klart = '001'.
THANKS N ADVANCE.

Hi SAm,
use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        classtype          = '023'       "Class type
        object             = w_object "Material number with Leading zeros
        no_value_descript = 'X'      "Default X
        objecttable        = 'MCH1'    "Table name Mara or MCH1 or MARC
      TABLES
        t_class            = t_class   "It return the Batch class available for the above combination
        t_objectdata       = t_char "Return Batch characteristics(ATWRT) and their value ATINN in this table
      EXCEPTIONS
        no_classification = 1
        no_classtypes      = 2
        invalid_class_type = 3
        OTHERS             = 4.
Regards,
Prabhudas

Need a table with asset number and document number

Hi to all experts.
Im in a support project. There is an issue in the customized report the total expense for february is coming 10,322 dollars which is 322 dollars extra it should be 10,000 .but i see the table ANEP the value is 10,322 dollars,when i check the corresponding document for the asset no in bseg table im unable to find any asset no ... what could be the problem ............

Hi,
In ANEk table ,check field BELNR . the number may be a material document no or Fi Doc no. if it is material doc no then try MIGO - Display -> doc info ->press FI Document.
Or directly try with fb03.
Or in BKPf table there will be field awkey. in that field give material doc no and material year combinely , then you will get FI Doc No. then go with bseg table.
Regards,
Ravi.

Serialzn profile and material number table

Similar Messages

Maybe you are looking for