Series from Waterfall analysis worksheet are not populated

Hi all,
Can anyone tell me besides configuring the Rolling data, setting the active_forecasts_versions and profile_forecasts_versions parameters.
What other settings should one do for the system to populate the week4_forecast, week8_forecast, week13_forecast series and implicitly the 4 week lag forecast, 8 week lag forecast, 13 week lag forecast series?
Tks
All

Hi,
In case you built a new data model check the series availability in the component.
Check the series' configuration and expressions to validate that the correct field is being updated.
Check if the week4_forecast, week8_forecast, week13_forecast as well as their corresponding lag series are in the active profiles while executing the rolling data profiles.
Also the order of the series listed in the "Configure Rolling Session" dialog box and the time bucket of the source and target series should be verified for proper update of the mentioned series.
Hope this might be of some help.
Regards,
Shekhar

Similar Messages

Values are not populating...

After selecting the data from LOV the values are not populating in the respective fields.
i've checked the 'LOV' no problem in that,but im think below coding have a problem.
declare
     b boolean;
begin
     :global.job:=null;
     clear_form(no_validate);
     b:=show_lov('view');
     :GLOBAL.ADDNEW1:=0;
--     go_block('JOB_CARD_MAIN');
     GO_ITEM('JOB_CARD_MAIN.BRANCH_CODE');
     set_block_property('job_card_main',default_where,'job_no='||chr(39)||:job_card_main.job_no||chr(39));
     execute_query(no_validate);------after this line get execute the values get disappear from the field
     insert into da.mylog(username,tname,mdate,oper) values(user(),'Job Creation',sysdate,'S');
     commit;
end;
Pls help..

Which trigger do you have this code in? I'm guessing it is a Key-ListVal trigger.
Have you tested the WHE RE clause in SQL*Plus to ensure it returns a record set? Most likely, the query returns no rows which could explain why the block is empty. Also, why are you clearing the entire Form instead of just the JOB_CARD_MAIN data block? Perhaps you should try:
Go_Block('JOB_CARD_MAIN');
Clear_Block(NO_VALIDATE);Also, the EXECUTE_QUERY built-in does not have a NO_VALIDATE parameter. It only supports the following parameters:
ALL_RECORDS
FOR_UPDATE
or the combination of the two (ALL_RECORDS,FOR_UPDATE). It also allows you to set the Locking mechinism by passing the parameter NO_WAIT.
Just a suggestion, try your query in SQL*Plus to make sure it produces a record set and Comment out all the extra stuff in your code and only keep the SHOW_LOV, CLEAR_BLOCK, SET_BLOCK_PROPERTY and EXECUTE_QUERY to see if a row is returned. If yes, then add the rest of your code back one line at a time.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

IPhoto - pictures are not populating

All of a sudden, my pictures within iphoto are not populating. I can see the outline, but the pictures are not there.

Hi Van,
did you do anything right before this started happening?
did you have a crash or have to force quit iPhoto?
Did you rename any photos or folders in the iPhoto Library folder in the finder?
do you have the latest version of iPhoto?
have you tried a rebuild yet?
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Lori

Finance Tables are not populating as expected

Hi Gurus,
Finance tables are not populating as expected when we ran vanila etl for obia 7.9.6.3 at the first instance.
For Example: Data is populated to w_ar_xact_f , w_ap_xact_f , w_gl_balance_fs , w_gl_account_d
but not other tables like w_ar_balance_f, w_ap_balance_f,w_gl_balance_f.
As per my finance team theThe natural account range in ebs is 0AA to Z00. I have given the values in file_group_acct_codes_ora file as fallows.
101,0AA,Z00,GEN PAYROLL
101,0AA,Z00,AP
101,0AA,Z00,AR
Please, Can anaybody help me if there is anything wrong in my configuration file 'file_group_acct_codes_ora'
Thanks in Advance,
gns

Hi Ahsan,
Thanks for the reply.
I have re configured the file_group_acct_codes_ora.csv file based on the input from EBS financial team. When i ran the full load for FINANCE,PROCUREMENT,PROJECTS and HR the fact tables are not populating as expected.
For ex: SIL_ARTransactionFact_Diffmanload,SIL_APARTransactionFact_Diffmanload,SIL_GL_Revenufact_Diffmanload tasks are completed successfully.
But the SIL_ARTransactionFact_Full is failed with error ORA-08103 object no longer exists.SIL_APTransactionFact_Full ,SIL_GL_RevenueFact_Full tasks are failed with the error an index define on target table. Like this some of the sessions are failed with index define on target table. Before starting the full load i have reset the data sources to truncate the table as well. Would be great if i get some light on this issue.
for ex:I could see some data in the fallowing tables
w_gl_account_d
w_gl_group_account_d
w_ar_xact_f
w_ar_xact_fs
w_ap_xact_f
w_ap_xact_fs
w_ap_balance_f
w_ap_balance_f_tmp
w_gl_balance_fs
For ex: I can't see any data in the fallowing tables
w_ar_balance_f
w_ar_balance_f_tmp
w_gl_balance_f
w_payroll_f
w_payroll_fs
w_gl_cogs_fs
w_gl_cogs_f
Thanks in Advacne,
GNS.

List of materials from the excel which are not posted

I have written bdc,
that ware house storage locations should not be allowed.
All the storage locations in the table T320 are ware house storage locations.
so i have written
if not it_data1 is initial.
SELECT * into table iT_320 FROM T320
for all entries in it_data1
where WERKS = it_data1-werks and
           LGORT = it_data1-lgort.
endif.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                          lgort = it_data1-lgort.
IF sy-subrc = 0 .
    delete it_data1 index sy-tabix.
ENDIF.
endloop.
So its working fine till then.
but i wanted a list of materials from the excel wch are not posted,so tht the user is aware tht some items are not consumed.
How to display that list in bdc.
Please give the code for that.

MY EXCEL DATA IS IN IT_DATA1.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                          lgort = it_data1-lgort.
IF sy-subrc = 0 .
    delete it_data1 index sy-tabix.
ENDIF.
endloop.
LOOP AT IT_DATA1 .
    MOVE-CORRESPONDING IT_DATA1 TO IT_DATA_h.
    Collect it_data_h.
ENDLOOP.
Clear it_data_h.
clear : it_data1.
THEN MY BDC IS LIKE THIS.
LOOP AT IT_DATA_H .
perform bdc_dynpro      using 'SAPMM07M' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'RM07M-WERKS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MKPF-BLDAT' LV_DATE .
perform bdc_field       using 'MKPF-BUDAT' LV_DATE.
perform bdc_field       using 'RM07M-BWARTWA' '261'.
perform bdc_field       using 'RM07M-WERKS' IT_DATA_H-WERKS.
perform bdc_dynpro      using 'SAPMM07M' '0421'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSEG-WERKS(03)'.
CLEAR : FLAG1, W_FLAG.
LOOP AT IT_DATA1 WHERE aufnr = it_data_H-aufnr.
W_FLAG = 1.
CONCATENATE 'MSEG-MATNR' '(' W_FLAG ')' INTO W_MATNR_C.
perform bdc_field       using W_MATNR_C
                               IT_DATA1-MATNR.
CLEAR : QTY.
QTY = IT_DATA1-ERFMG.
SHIFT QTY LEFT DELETING LEADING SPACE.
END LOOP.
NOW HOW TO COMPARE THE MATERIALS IN EXCEL AND BDC POSTED.
PLEASE PROVIDE THE CODE FOR THAT AND HOW TO DISPLAY.

The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking. It use to work but quick working a month ago.

The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking. It use to work fine but quick working a month ago. I mirror from my phone to the Apple TV. Still images and everything I do on the phone is mirrored on to the TV except when I want to show a YouTube video or any video and then the screen on the phone and the TV screen go black and the spinning beach ball appears. The videos open right up on the phone if I do not have mirroring on and going through the Apple TV. I just downloaded the latest update to the phone it did not fix the problem. Please help. Thanks, Elvis G

Hello Elvis G,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps concerning device issues. You may want to consider a reset, then testing to see if the issue is resolved:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

Billing tab of BP are not populated in the sales order automatically

Hi
Business Partners Billing Tab details like customer pricing procedure, currency, price group, Customer group etc are not populated in the Sales order automatically?
I have checked the pricing procedure determination also.
Thanks

Thanks problem is solved.

Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library

Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library.
I have tested the library using a standard email (with attachment) to the library and this works fine.
I have monitored the drop folder on the server and I can see both emails being picked up in drop and processed by SharePoint. The email sent from a regular email account is uploaded with the attachment, whereas the email sent via SSRS subscription
email is uploaded and the attachment (report) is missing.

An update on this. The email when sending from SSRS subscription is received in the library and the attachment is contained within the .EML file uploaded.
The behaviour that I would like from SSRS subscription emails are to just have the document and not the email.
Below is a snippet of the .EML files I quick copied from the Drop folder.
Email attachment snippet sent from SSRS Subscrption:
----boundary_2477_75fa3d73-56de-4948-ad82-6588f3a35b95
Content-Type: application/octet-stream; name="Toilet Usage by Month.docx"
Content-Transfer-Encoding: base64
Content-Dis;
filename="=?utf-8?B?VG9pbGV0IFVzYWdlIGJ5IE1vbnRoLmRvY3g=?="
Content-ID: <10722c0f-749e-4ecb-ac3f-206317bae734>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 attachment snippet sent from Outlook:
--_004_A4C6DCEDE4346446A79AFF493D278530FB87FA07MELABCDEXA1airp_
Content-Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document;
name="Toilet Usage by Month.docx"
Content-Description: Toilet Usage by Month.docx
Content-Dis; filename="Toilet Usage by Month.docx";
size=76574; creation-date="Thu, 12 Mar 2015 00:41:14 GMT";
modification-date="Thu, 12 Mar 2015 00:41:14 GMT"
Content-Transfer-Encoding: base64
UEsDBBQAAAAIAMJcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgAKKAUAAAA
AAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9I8T2TDvAzFuaPrE1
kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//pv3/x+Qe/fnr75WevX/3lD9qf
Hz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXnr189/eUPvn768gcf/KeP/uNv/uIXr19+
9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++/NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9e
vP27r9788OXrL968ePfZzz/7/LN3X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

UDF are not populating in design console

Hi,
I have created UDF in admin console and mapped then in self service form as well. Fields are now reflecting in the user creation form. I have also published the sand box but these fields are not populating in design console.
Please help me in resolving this issue.
Thanks!

Did you add these fields in View User for ?
Create and activate a new sandbox
Add your fields on View User form
Publish Sandbox
Test
I have also published the sand box but these fields are not populating in design console.Didn't understand but you can't see User Form UDFs in Design Console.

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Graphical mapping issue, repeated lines are not populating

Hello All,
i have mapping where i need to map source node and its coresponding subelements to target node and its subelemtns based on certains condition, which i did using If condition.
Now my issue is, when mapped source node with condition , conditional field is not in the same node which i am mapping. It is in the parent node of the node which i am mapping. SO when i mapped to target node, only one occurence only its populating in target side even When lines repeated more than once its not populating all lines corespondingly. Please let me know how to populate all line items when i have validation field in parent node and child node and its subelemnts to be mapped to the target node. ( Both parent node and sub node in source and target node are unbounded) .
Thanks in advance.
Regards,
Kalpana

Thanks for your reply, My source structre looks like below.
I have to map rows node and its coresponding fields to target node Lines which is unbounded and to its subelements when collection name = 'MATGRP_COLLN'. I did it using if condition but , only one row tis getting populated in target LIne node. next repeated row values are not populating in target side.
- <extensions>
+ <collection name="REGION_COLLN" />
+ <collection name="DIVISION_COLLN" />
+ <collection name="DTL_PRCNG_COLLN" />
+ <collection name="COUNTRY_COLLN">
- <collection name="MATGRP_COLLN">
- <row>
- <fields>
<OBJECTID>-2147483540</OBJECTID>
<UNIQUE_DOC_NAME>-21474835401248121690973</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>1</MATGRP_ITEM_NO>
<MATGRP_NAME>10100000</MATGRP_NAME>
</fields>
</row>
- <row>
- <fields>
<OBJECTID>-2147483539</OBJECTID>
<UNIQUE_DOC_NAME>-21474835391248121706160</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>2</MATGRP_ITEM_NO>
<MATGRP_NAME>10101500</MATGRP_NAME>
</fields>
</row>
</collection>
</extensions>
</object>
</objects>
</fcidataexport>

Series from Waterfall analysis worksheet are not populated

Similar Messages

Maybe you are looking for