Series of Photos -resource needed

Hello I am not sure if I posted in the correct place.
I am looking to incorporate a series of images in my
captivate project similar to the car sales demo created by Silke
Fliescher. Here's a similar link to what I am looking for. Anyone
know where I can find a resource like this?
http://www.photoconnect.net/aapic/ThumbPage_100413.php
Thanks in advance.

Hi again
When you say you weren't able to find anything, are you
saying that what you found wasn't really suitable? Or are you
saying you didn't see any images of people?
I ask, because there is a "Yaoti people" (With animated
people - haven't tried it, just knew about it) and there are two
different collections of images. One of Female character and one of
Male. I think those are on page 2. So if you didn't click the link
to go to page 2, you missed them.
Cheers... Rick

Similar Messages

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • Series of photos that will auto-play

    I'm making a web site where the homepage will have a series
    of photos that will play in random order. Can I do that in
    Fireworks or Dreamweaver CS3 or did I need to puchase Flash?
    The effect I'm talking about is something like what you see
    on this page:
    http://www.has.vcu.edu/wld/index.html.
    I will appreciate any leads you can give me. Thanks!

    academicweb wrote:
    > I'm making a web site where the homepage will have a
    series of photos that will
    > play in random order. Can I do that in Fireworks or
    Dreamweaver CS3 or did I
    > need to puchase Flash?
    >
    > The effect I'm talking about is something like what you
    see on this page:
    >
    http://www.has.vcu.edu/wld/index.html.
    >
    > I will appreciate any leads you can give me. Thanks!
    >
    You can check out the Slide Show Command in FW: Commands >
    Create Slideshow
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    Adobe Community Expert
    http://tinyurl.com/2a7dyp
    See my work on Flickr
    http://www.flickr.com/photos/jim_babbage/

  • Cancel Printing of series of photos

    How do I cancel printing a series of photos on HP Photosmart 7760?  I'm using Windows XP and need to print a document..
    This question was solved.
    View Solution.

    The easiest way is to just press the cancel "X" button on the printer.  Printing will stop, although the compter will continue to send the print job until it is done.  This may take a minute or two to complete.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

    Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

    Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
    Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
    Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
    This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

  • I have Photoshop CS 6 on my computer.  I want to bring a series of photos together into one image wi

    I have Photoshop CS 6 on my Mac computer.  I want to bring a series of photos together into one image without any space between images, does anyone know how to this?  Ideally I would like to this manually.  
    The reason I ask in my ealier verion of Photoshop, CS3, there was a manual alignment  feature when using 'Photo Merge' feature, undr which you could manual alignment photographs if you wanted to, and I do in this instance.  This feature was removed in subsequent versions of Photoshop CS 4,5, and 6. 

    Sean, Batch resize them all to the samne size, load as layers, increase Canvas size, and the layers will 'snap' together with the Move tool.  You'll be able to use the alignment tools in the Options bar when the Move tool is selected.  You will also be able to use the 'Auto select layer' feature in the Options bar to make it easier grabing the right layer.
    Otherwise, get hold of Contact Sheet 2. Still resize all the images to the same size, and set the gap to zero, and turn titles off.  Please note this is from memory, and it is years sonce I last used Contact Sheet.
    http://blogs.adobe.com/jkost/2012/06/contact-sheet-ii-and-pdf-presentation-return-to-photo shop-cs6-in-64-bit.html

  • When trying to open iPhoto the computer says: 'The photo library needs to be upgraded to work with this version of iPhoto.'  So I click 'upgrade' Then it says: 'You can't open your current photo library using this version of iPhoto.' Etcetera...

    When trying to open iPhoto the computer says:
    ‘The photo library needs to be upgraded to work with this version of iPhoto.’
    So I click ‘upgrade’
    Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
    Etcetera...
    What to do??
    Theo

    Is your Apple Intel-based, poppelmacbook?  If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based.  Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6.  It is upstairs now...for visiting family:  games, garage band, etc.--things I never did use.  Apple refurbished and purchase the extended warranty.  Apple loyalist since late 1980's.

  • I get a message that my photo library needs to be upgraded and my photo library will not be readable by previous versions of iphoto after the upgrade.  I don't dare do anything.  Please help

    I keep getting a message when I try to open iphoto that says that my photo library needs to be upgraded and my library will not be readable by previous versions of iphoto after the upgrade.  What do I do??

    Depends - you first off need to suypply us with information since we only know what you tell us
    Like what version of iPhoto are you using? Have you recently installed any iPhoto (or iLife) updates or upgrades? Do you plan to use this iPhoto library with two or more different versions of iPhoto (no possible so stop now if you do)? Where is your iPhoto library?
    Anything else that you can tell us that might let us give you a good answer to your question
    LN

  • The Photo Library needs to be upgraded....

    "The Photo Library needs to be upgraded to work with this version of iPhoto." This came up as I opened iPhoto 4.0.3. which I have been running since June 05. I don't think and I looked to see if iPhoto got updated, all looks the same.
    Please advise as to what to do now. I made a backup, on another HD, of my Pictures in iPhoto Library just in case.
    Thanks, Spencer
    Dual 1GHz G4, HD 80,120 & 200GB.   Mac OS X (10.2.x)  

    So you have been running iP 4.0.3 all that time and you got the upgrade library message???? interesting.... something is fishy here...
    well like you did, which was the smart thing to do, make a backup of the entire iphoto library (inside your pictures folder) and do upgrade the original library and see what happen!
    when you say "of my Pictures in iPhoto Library just in case."
    did you copy the entire iP library???
    Make sure that you really copied the iPhoto library because it needs all the component that are inside for iPhoto to operate properly.
    BTW, did you move anything in or out of the Ip library????
    as a rule of thumb, DO NOT venture inside the iP library, move or take out anything in there...... if you did, this may be the cause of iP's need to want to be upgraded!!! Furthermore, any deletion from the iPlibrary not done within the iP applications will casue "mayhem later
    my 2 cents!
    michel

  • How to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

    how to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

    There is no way to trace the source of a saved photo.
    You might have some luck if you search through the Safari web site history available via the Bookmark icon.

  • IPhoto keeps saying The photo library needs to be upgraded to work with this version of iPhoto

    Upgraded to new Lion iMac from Snow Leopard iMac, then upgraded to iCloud. I upgraded to the latest version of iPhoto. I get this message that says that "The photo library needs to be upgraded to work with this version of iPhoto. I have iPhoto '11 version 9.2.1(628)
    I have attached the screenshot here. I have over 31,000 photos in this library. I click upgrade and it shows me a line for a while and then goes to the photos. Everything looks fine except photstream doesn't work and I always get this same message when I open iPhoto again.
    Another detail is that I do have mobileme web albums still publishing from this iPhoto. Could this be causing a problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I have i cloud id , i amunable to view my photos @ icloud need help

    i have i cloud id , i amunable to view my photos @ icloud need help

    Photos can't be viewed at icloud.com.
    Photo Stream merely "pushes" your photos to other supported devices.

  • External services po for resources need information till ML81N, MIRO etc.

    hi all,
    Looking for external services po for resources need information till ML81N, MIRO.
    Even  HR personnal number PA 30, CAT2, CATM  required for smooth flow.
    Internally for this HR tcodes WBS element Activity number is also involved.
    Thanks in advance for mm dudes for replys.
    Regards,
    Parameshwar.

    Hi,
    I hope as per your requirement , you have to develop some custom (Z) report or using SAP query. All the requested data are available in Std.SAP tables, you have to fetch it as per your requirement.
    You can check the std.report - ME2S for planned/actual Comparison
    Thanks & Regards,

  • Best way to click through series of photos on a page?

    I'm building a site in DW CS3, on page will have a series of photos with captions for people to view.
    How do I build the page so people can click through the photos, without having to create a page that has to load for each photo .
    I would like the photos page to remain static but when people click 'next' or 'back' a new photo appears - or slides in, in place of the current.
    Any help appreciated.

    I just checked and it wasn't iPhoto 8 so maybe it was an earlier version of 9.

  • Do all photo's need to be processed?

    Do all photo's need to be processed? How do you know if it needs it or not? I mean other than if you want to be artsy with your pictures like making HDR effects, etc. Or is it subjective?

    Do all photo's need to be processed? How do you know if it needs it or not? I mean other than if you want to be artsy with your pictures like making HDR effects, etc. Or is it subjective?
    Actually all photographs are processed. There is no such thing as an unprocessed photograph. Whether you do it consciously using a raw editor, or let the camera make decisions for you doesn't matter really as you apply an interpretation of the raw data. With film the same thing applies. There the choice of film stick, the filters you use, and the printing technology and dark room decisions are unavoidable "processing" steps. In digital, a scene rendered physically correct as captured by the sensor is very boring and looks nothing like the jpeg out of camera nor like the default Lightroom rendering. This is why SOOC is such silly nonsense. Jpegs are cooked files. The default raw rendering in Lightroom is only one possible interpretation and not necessarily a neutral or unprocessed one (far from). Photography as we know it is always subjective. Mainly because human vision is subjective and very different from how a camera sensor works. There is always a degree of toning, contrast enhancement, etc. going on. The raw editor and tools such as Photoshop just gives you more control over it than having the camera do it for you based on decisions the engineering team for the camera made. You can definitely do extremely good photography by never touching a post processing tool and just using jpegs out of camera. Just don't call it unprocessed. You are however leaving some major creative tools unused that could improve your images substantially. In the end however this is all a creative decision and there is no right answer for everybody.

Maybe you are looking for