Serious bug after n78 firmware update

I update the firmware from 12.046 to 12.149 recently but after that am not able to install sis applications and few java applicationa are also not installing or malfunctioning. Have done a deep reset (*#7370#) but the problem remains.

How did you try to reinstall the FW? (Using NSU or Nokia FW Over the Air update also known as FOTA)
as i know there is no option for reinstalling FW for the phone using FOTA. if you wants to reinstall the FW you should try other method of FW installing, that's mean you have to go for NSU (Nokia Software Updater).
Here are the instructions for Update FW using NSU
http://europe.nokia.com/get-support-and-software/download-software/fota-update-phone/by-pc
for the details
http://europe.nokia.com/get-support-and-software/download-software/fota-update-phone/help
Don't forget to backup your data
Hope this work for you!

Similar Messages

After a firmware update to airport express should I unplug the unit then plug it back in? (bascially reboot it)

After a firmware update to airport express should I unplug the unit wait a bit and plug it back in? (basically a reboot)

I updated the firmware on the 2nd of this month. Everything was fine. About a week later internet speed began to be slow. I rebooted the modem and the speed was okay for awhile, then slow again. I'm wondering if it's the airport express. It didn't tell me to reboot at the end of the installation.

Wlan error after a firmware update

Ok there seem to be many posts about this issue but i cannot find anything that seems to work for me.
I not to recently updated my N95 8Gb firmware to 20.0.16 and found that I was having errors with WPA on WLan, previously I had no such problem and the issue only occured after the firmware update.
to add some more info I am on a network with a linksys wrt300n
I have tried wep it works but dont want to compromise security.
All computers on the network are using wireless g and the key is definitely correct when entered
any help would be most appreciated

I don't have N95, but if the firmware is updated to latest version the wpa most likely wpa2. Having wpa in place of wep gives only very little added security for a determined hacker! It will only takes 30min to an hour to crack that. Security like that deter only the free net riders. Try if there is upgrade for your modem/router, its usualy the case. For home network wep or wpa sufficed.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Incompatible after the firmware update

I had missing the dictionary (including the icon on the screen) and chinese language currently stored in my nokia 6680 after the firmware update. what is the problems?

Yes I m using one of the default themes.
I have even done the re-installation of the same firmware version again, it did not work.
Each time I flash the firmware, installed applications become unworkable although the icons still remained in the menu. IT is always a great hassle to have to re-install all applications over again.
tsk.

Bluetooth doesn't work after E90 firmware update!

Nokia staff - help needed!
Bluetooth has stopped working after E90 firmware update.
The following on-screen message is shown: "Unable to perform Bluetooth operation!"
P.S. Reinstalling firmware via Nokia software update doesn't help at all. If connectivity problem still can be solved with USB cable, the worst tning is that I can't use my phone's BT handsfree when driving.

Hi hanzzi
No information as to what device you are using, but try deleting E:\CITIES + .qf file from memory card then restart OVI Maps application to re-define folder structure required to download regional mapping using OVI Suite.
Happy to have helped forum in a small way with a Support Ratio = 37.0

BUG: text rendering problems after keyboard firmware update

Hey all!
Just letting you know that today, after installing the keyboard/mouse firmware update 1.0, the font rendering in many applications become weird, letters may overlap, see some screenshots:
http://artemio.net/tmp/apple/bug1.png
http://artemio.net/tmp/apple/bug2.png
My system is iMac Intel Core Duo 17", 2 GB RAM, 250 GB HDD, Mac OS 10.4.6.

Just to clarify, that was a software update, not a firmware update. I don't think the keyboard has any resident firmware.
Since this is a new update from Apple, and there have been very few posts about problems after it was installed, (I have seen a couple here) I think that you should call and speak directly with an Apple Customer Service rep. That way Apple knows some have issues with the update and they may have suggestions.
Let us know what they say.

Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update

Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev

Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom

I think there is a very annoying bug after the latest update of firefox, can I talk to someone, or chat with someone so I can get rid of it

Since the latest auto update of my firefox browser I am experiencing strange issues. Every evening when I stop working, I close my browser (closing all the tabs that I am working on and in the morning, I restore the session) . For many years everything worked just fine ... untill after the last auto update of the firefox browser .. all of a sudden a got 302 errors ( a blank page with the description 302 and I believe "page moved here" or something to that extend ... i try to click the link and get nowhere.
I first noticed it on a few wordpress pages (backend ) that I was working on and which were restored from the previous day ...
thinking it was a server error, since we have several vps and dedicated servers .. i contacted the company who hosts our servers ..
they looked into it and apparently .. there were no issues on the server side and neither on that particular computer ... but our server hosts told us .. that it is probably browser related and seemed to have something to with a bug with the cache of the browser
we didn't know what to do .. it was very annoying .. but at that point it only happened once on a hew pages .. so we decided to see what happened the next time
Next time we did not restore a session with wordpress pages .. but with the google search engine open and on a few other tabs logged into social media .... and as was saidn by our server hosts it was indeed not related to work that we did on pages on our servers ... since that time even the google search engine homepage ... showed us ... moved here
Can you pease look into it and fix this .. we are doing the same thing as many years on the same computer also a few years .. so it is not anything we do wrong either .. it is most definitely browser related
so can you please fix it asap .. since when we work on wordpress .. that is not the only thing that goes wrong .. we also have difficulty uploading updates ... when updating sometimes after the update of any particular change on a wordpress page is done ... we are also redirected to a blank page .. so the updated page does not want to load ... in that case we have use our back button ...
which sends us back to the right page ... but with the old data on it ... then we have to refresh that page .. and only then we see the page updated ... so it seems that there is an issue in both direction with the caching of the browser after the last update
Kind regards,
Robert

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

After EFI Firmware update 2.3, MBP Early 2011 will not boot. During restart it all went wrong please help!

Hello,
I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting. I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
Thank you and please ask any questions!

Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.

27 inch thunderbolt display blacks out after Thunderbolt Firmware Update 1.2

Bought 2 new 27 inch TB displays for two different machines and after a couple of days the Thunderbolt Firmware Update 1.2 appears on my Mac Pro with one of the displays installed. So I install the firmware update. Now my display blacks out periodically and I keep getting Graphic Display Errors with a request to sent the errors to Apple. Running a 32 GB Mac Pro (late 2013 circular style) I have three monitors connected (two 20 inch cinema displays and the new 27 inch display). This machine is supposed to be able to handle three 4k monitors or 6 standard TB displays. I've seen the posts about the blacking out with this monitor but I didn't have any problems before the firmware update and now I've got them pretty regularly. I had the blacking out problem on an earlier monitor and took one of the monitors back and Apple gave me another one and this is the replacement. Same problem, but this one only started after the update. I'm hoping someone from Apple reads these messages and can let me know what's up.
BTW, I also have an older 27 inch Apple monitor that ran perfectly on this machine so I'm disappointed that I spent all this money and now get the blacking out issue.
Mac Pro (Late 2013)
Processor 3.7 GHz Quad-Core Intel Xeon E5
Memory 32 BG
Graphics AMD FirePro D300 2048 MB

I have my Thunderbolt display connected to my MacBook Pro and have been experiencing the same issue, getting worse over time. The folks at my local Apple store did not know what to do about it. So, I looked around and tried different thing.
The one thing that seems to be working is to System Preferences > Build-in Display > uncheck “Automatically adjust brightness.”
I hope this helps.

MacBook Keys not working even after KeyBoard Firmware update

My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.

The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

Can't send mail after latest firmware update

My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

Was this for 10.5.8???
Others have reported it for 10.6.8 & up...
http://x704.net/bbs/viewtopic.php?f=12&t=6118

Mac Mini doesn't startup after failure firmware update..

Hello.
I have a mac mini.
Downloaded firmware update and Mac OS X update through MAC OS X Software Update.
After that my Mini Mac ask me to restart.
And now my display shows "No signal" message and no startup sound. Indicator lights up, can hear Hard Drive sound and DVD disk sound, optical mouse lights up... and nothing else.
I tried to reset PMU... nothing again (

Hey Guys today i updated my macmini from 10.5 to 10.5.2 i downloaded the file 343MB on http://www.apple.com/support/downloads/macosx1052comboupdate.html since i have a slow connection i took me 5 hours to download the file after installed and and saw the success intallation with a green checkmark then restart and it presented me a blank white screen as i was reading the discussion i read that just leave it as the OS is doing it's thing but there is no indication whatsoever just a blank screen. then i saw my SD card reader blinking i remove it thinking that its the cost why there is now indicator that the HD is still reading so ive waited for 30mins without touching a thing and finally i heard the CHIME OF RELIEF the apple logo flashes and I have installed my OS 10.5.2 successfully

Serious bug after n78 firmware update

Similar Messages

Maybe you are looking for