Serious Keyframe Glitch

I think this is some glitch, perhaps OS related or something in AE. I have been slowly color correcting this project for the last several hours and everything has been working just fine. I change a value and a keyframe is make and the image on the screen corresponds to that change.
Now suddenly if I change a keyframe all of rest of the timeline takes on the value of the one changed keyframe. If I move to another keyframe and just slightly change it (I just have to tweak it slightly, one tenth or hundredth) and image jumps to the original values of that keyframe and all the images on the timeline adopt the same values, disregarding their own keyframed values. However the values of the keyframes read as before, it is that just the images have no correct relation to their keyframe values.
For example: On one part of the timeline the image is too dark so I move the RGB Master Gamma from 1.03 to 1.20 and the image is now where I want it. But now all the rest of the timeline has increased in value even though there many other keyframes and their numerical values have not changed.
There is a disconnect between the image and the various keyframes. Now, if I go to another keyframe where the image is now very over bright but the keyframe states it is at .86 and I tweak it to .87, it drops to the correct dark value. However all the rest of the timeline is now very dark, WITHOUT THE KEYFRAMES CHANGING NUMERICAL VALUE.
I am trying to explain this clearly but it is so frustrating and difficult to explain. This is a personal project that I have been working on for over a year. I just need to get the last bit of editing and CC work done and I can mix the audio and be done. This keyframe issue is stalling the entire process.
I am working in the simplified interface of Color Finesse. I have hundreds of keyframes in this project.
This has just started to happen in the last week or so after working on this project, on and off, for months.
Is this at all clear?
Any idea as to what is happening?
I am using CS3 on a mac book pro.
Thanks
Bob

I am not and have never used OpenGL.
I cleared the caches, trashed prefs in AE. This has not helped and still the keyframes refuse to work correctly.
Please make sure, that you enable the stopwatch on the main Parameters control in the top area. The other control groups will not animate any changes, if that parameter is inactive. They are merely alternate representations of the controls in the full interface mode and thus don't behave any different than when working with the full UI.
I don't understand the above statement. It does not seem to matter if I activate keyframes on the timeline or in the upper window effects window. If I activate or make a change in one window the same change occurs in the other.
Thinking more about this I realize that it began to happen after the only time my macbook pro crashed.
What happened was that I was in the full Color Finesse interface, reading the help files to better use that program, and tried to save a look as a preset. I hit a couple keystrokes, I forget exactly perhaps shift and F2, and the screen went black, the mac shut off. I rebooted and went on. (These strokes don't work for a laptop without reprograming the keys)
Because of that crash, perhaps some file in AE became corrupt. It first the keyframe problem only happened once and then went away but now it is impossible to get the keyframes to work correctly.
If this is the case, what should I do. Reinstall AE? I am loath to reinstall AE this far along in a project. I will clone the system drive before reinstalling AE.
I think I will reinstall AE this coming week. I suppose I should completely uninstall it then reinstall. I am concerned about doing this in the middle of a project. Any ideas as the best way to go about reinstalling? Would I need the exact version that I was using? CS3 8.0.2.27
Any thoughts as to if this could be the problem and the solution or otherwise.
Thanks,
Bob

Similar Messages

T400 - serious graphical glitches while Hardware Virtualization is turned on in the BIOS.

While hardware virtualization is enabled in my T400, I'm getting serious graphical glitches (garbled graphics). This happens both when outputting to the T400's monitor or when outputting to an external display.
I actually don't have to do anything special to get the garbling to start - just booting Windows 7 and using it regularly will make it start to glitch.
Help please.

Pickaxe wrote:
Thank you for that link, it was very helpful.
The 'solution' of course, was far from satisfying (I'm experiencing Type B visual corruption). Especially considering the model I'm using is preconfigured - Lenovo shipped it with a 2GB+1GB DIMM.
It boggles my mind that Lenovo uses a configuration that is not fully compatible with the processor.
I don't find it so odd, most users will never use the virtualization feature. I personally have 3gb in my T500 and have used H-V with the ATI chipset and it works as it should, I've tried it with the Intel GPU and it is garbage but then again.. the intel 4500 is kinda garbage..
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

RMBP CUDA Playback Serious Issues/Glitches

Just purchased a new rMBP and am running Premiere 6.0.2 and with CUDA 5.0.45 installed. Here are the system specs:
- 756gb SSD
- 2.7 GHz Intel Core i7
- 16 GB Ram
- NVIDIA GeForce GT 650M 1024 MB
- OS X 10.8.3
I'm experiencing serious playback issues and crashes in premiere on both internal and exteranal display with both CUDA or OpenCL enabled. With CUDA playback the monitor window turns black, freezes white, or gets replaced with content from other windows that are open. It generally works great for a few minutes when I first open premiere, but then everything wigs out. The timeline and audio will play, but no video shows up. This generally causes the source window to freeze up as well. In OpenCL, both the windows turn into digital glitching as soon as I open up premeire. This has happened while testing RED 4k as well as Canon 5D MKiii 1080 footage. The only way premiere is running smoothly is through the software only mercury playback. I've disabled graphics switching, etc. and tried any fixes I've found so far, but no luck.
Here's another link to a similar forumn on Creative Cow that is discussing the same issue I'm having.
http://forums.creativecow.net/thread/3/930479
Any info would be awesome. I have another few days to decided if I want to keep the computer or not with a full refund from Apple, so I'm trying to resolve any issues.
- Eli

Does rMBP mean some kind of Mac?
If yes, some saved links that may help
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
Mac Retina Bug http://forums.adobe.com/thread/1159632
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

Serious audio glitch problem in 9.1.1 - please help!

Got a problem with audio glitching that is driving me insane - hopefully someone can help (please! :_))
I'm on Logic 9.1.1 on a recent MacPro using 10.5.8, 12Gb memory. I've created an arrangement in Logic with two multi timbral / multi-output instruments (Kontakt and Stylus RMX - both up to date versions) with aux outputs for all of the instruments channels; 16 in the case of Kontakt, 8 in the case of RMX.
I'll work with this setup and after a while I find that whenever I play and then press stop, a tiny portion of audio will repeat rapidly, over and over again in the 'master' left output channel at +6.0dB - it also shows up on all the instrument auxes at a much lower level. It's as if Aphex Twin has invaded my Mac... Weirdly, this problem crops up even if I'm not outputting anything from the multi-instruments - it's enough that say, an EXS instrument, plays something, I'll press stop, and then the glitch signal will appear in all the level meters of the multi instruments and master output, but not on the EXS level meter. If I press play again, the glitch disappears and audio playback is perfect - it only happens when stop is pressed. And no sign of it if there's a silent part in the arrangement with no tracks playing anything.
If I have any instances of reverb on bus channels, that audio will will also feed into the left channel of those busses, even when there are no channel strips sending to them. Weird as ****, and driving me up the wall with frustration.
I've omitted it being down to my audio interface (Metric Halo 2882) as the problem persists if I switch to the Mac internal I/O.
I'm trying to work through this at the mo as I've got a deadline for 2pm this afternoon - but I'm worried I might not make it due to throwing my feckin computer out the window. Please help - thanks!

Alasdair Reid wrote:
It's as if Aphex Twin has invaded my Mac...
If your deadline wasn't looming, I'd say buss everything to a stereo track and record this stuff. It sounds great, you could use it in another project later...
But to your problem: The only quick solution I can think of for you to try is to create a brand new fresh project and use the selective track import feature to bring your tracks into the new project. Don't start from an old template (that you may still be using since Logic 8 or something) because this could indeed be the root of the problem. Build a new template from Logic 9.1.1, then make a new project from that and import all your tracks. If it's your project that's corrupted somehow, this could be the trick to solve it, and it won't take too long to try, so it's worth a shot.
I'm not sure of this, but something is telling me I've seen this problem before, and if so it was on Leopard (not Snow Leopard) on a MacPro in the studio. Have never had it on my personal MBP (which was only ever Tiger and then Snow Leopard - I skipped Leopard on purpose because the studio machines seemed so very dicey). Also, I don't use RMX on my own machine but in the studio, yes. Same deal for multiple output instruments, I rarely do that either. On that point, another thing you could try is to forget about multiple outs for now, and just work with stereo instances. Yes I realize this will mess up your entire painstakingly built-up mix.. but if this is causing the flakiness you may have no choice but to go back to stereo instances, finish your writing, then do the whole mute/solo thing to bounce your individual parts to audio and proceed from there. In this scenario, selective track import will be a timesaver too because once you've done all the bouncing, you can just create a new project and import all of your channel strips and so on, to then re-assign the individually bounced tracks to the assignments you had before. Will be quicker to recreate your mix than having to do it from scratch. Or you might not even need to do this step because if eliminating the multi-out instruments makes the prob go away, then you can just recreate your assignments within the same project using the bounced audio tracks.
Get to it.
Once you've delivered.. I'd open that project again and record all of that lovely Aphex Twin messiness for later use.

Serious screen glitching

Since updating to 10.4.9 my screen shifts when I mouseover things, and text becomes obscured
While this doesn't affect the way my system runs, it is extremely distracting, and makes editing photos very difficult, as parts of the image move around on my screen (approx 5 pixels up or down)
Any ideas on how to fix this?
Dual 2.0GHz G5 Mac OS X (10.4.9)

Resolved
I had accidentally turned on Screen Zooming in the Universal Access PrefPane...
Oops!

Serious graphics glitches on MBP17" - opinions please!

I am going to take my laptop in to a store to get a genius to run some hardware tests, but in the meantime I'd like to know if there's anything I can do to diagnose this for myself.
I have bought a 17" MacBook Pro from the refurb stire - it's the most recent model, 2.4GHz Intelk Core i7 with 16GB of Ram and plenty of HD space.
This is the kind of think that happens, reaonably frequently:
http://www.youtube.com/watch?v=OBhf7bWvxwA
Given that this is a refurb Mac purchase, I wonder if it's possible to get the history of this machine at all, perhaps find out if this was the fault that was reported before?
I assume that, given it's a refurb unit, I can't exchange at an Apple store and will have to hope that a similar unit is available in the refurnb stock. But given this is discontinued stock, what would happen if a replacement wasn't available? Full refund, I guess?
Anyway, thoughts appreciated

Any thoughts on this? Problem has gone away for a day or so, not sure what wiull trigger it again, but that's the nature of intermittent faults, I guess

Possible serious video glitch with games

Last night, I fired up the Quake 4 demo on my new 24-inch iMac. It worked properly the first time around, but when I quit after the second try the video was corrupted and I had to force the system to shut down.
When I restarted, it instantly went to a gray screen with no Apple logo and refused to advance further (I waited to be safe). Restarting again didn't help. It wasn't until I reset the PRAM (Command-Option-P-R for those who need to know) that it started up normally.
Now it could be just that Aspyr needs to update the demo, but my worry is that the Radeon HD 2600's video drivers may be undercooked in Mac OS X and could be prone to corrupting the image in certain circumstances. I'll have to try more games in the future to validate this.
Now if Apple could only do something about the glossy screen... it's vibrant, but it was already high-quality before! I'd have kept matte.

angealexiel wrote:
hi
before i cry, please guys, tell me its a driver problem, not a hardware problem, cos apple took my old imac for 5 month cos they couldnt repair it, and i just received this one two days ago for exchange . so i'm gonna be crazy if this one need repair too.. i never had so much trouble with a brand...
I know what you mean. I feel much the same way. And I really do hope it is merely a driver issue of some kind rather than a hardware problem. If it is hardware, then it is the 3rd new Mac I have bought in a row that has been faulty
I do however suspect that it is software/drivers. Simply because im yet to read a single report from anyone saying that UT2004 does not crash at some point on their new alu iMac.
As i have said in numerous other threads now, I'll hold out for 10.4.11 or some other update of some kind that will hopefully fix it. If it does not fix it, or the update is not forthcoming very soon, then of course I will be complaining to Apple.

Serious USB glitch since installing itunes 7.7

Hi all,
I installed 7.7 then plugged in my iPod touch. iTunes prompted me to restore the software, once I did, an error message popped up and the USB connector that the touch was plugged into in now no longer working. Anyone have any thoughts, suggestions?

No, there was no current notice. I've tried restarting with no success. I'm gonna try disconnecting the display from the tower and see if that does anything. I'll keep you posted!

Help please. Playback hesitations/glitches making recording impossible

I am having a serious problem that has just appeared. I need to fix it asap. I'm right in the middle of several sessions and recording/playback has become impossible.
- This afternoon, at a session, the problem began... there were serious playback glitches causing noises and hestitations. It was impossible to record. I did a workaround by creating a mixdown of the tune, creating a new session and then having the person play over the one mixdown track. This worked but I think it was just luck...
- However...now, I am not able to do anything at all without this happening. I can't even playback. It seems to be getting worse.
- After pressing 'play' there is a hestitation before playback, then 2-3 seconds of playback then glitches and noise, then 2-3 more seconds of music, then glitches.
- Nothing has changed.
- Note: I have done several full band sessions recently, including one yesterday, with absoutely no problem whatsoever. The problem just appeared.
- Suggestions please! What would cause this?
Thanks!

I do not generally defrag audio files, as there seems to be conflicting opinion. However, just doing a bit of new reading, it seems that maybe I should start defraging. I can see how that could cause the symptom I was having. The drive getting full and the playback accessing so many small files.
One interesting thing that I just read was that the act of transfering the files from one drive to another using Windows Explorer automatically defrags the files. When I copied my files over to another drive, my session played fine, now being contiguous files. I should try copying the files back to the original drive and see if the drive, and session, perform better. Not a bad idea.

Mega 180 sold out?

I waited too long to get around to buying one and now newegg and zipzoomfly are both out of stock...
They are few and far between on ebay... are they being discontinued? Hopefully there are still some out there (pref. under $300)...

Hi Dr Stu. WOW!! I'd only checked the morgancomputers main/first page - so thought the mega180 was the only one available.( or maybe they've changed it since I first looked a couple of days ago) I'm now sorely tempted to stretch my budget and go for the 915. Would be much more "future proof" than the 180? Socket A very much outdated I guess?! And I personally prefer intel to amd............!! Apart from the obvious differences which I see from the specifications - wonder if you or anyone has any particular gotchas/ problems/ serious hardware glitches etc etc re the 915 compared with mega180??? ( I should add that i've had about a year wrestling with problems on a shuttle zen - should have read the shuttle forums more carefully!! ) I know quite a bit (now!) about keeping heat down on a sff box! So wonder just how bad/difficult etc it would be keeping a 3.2 prescott (say) cool in a 915 compared with (say) a sempron 2800+ in a socket A mega180 ????? ( I know it's not that simple............... but thought i'd ask anyway!!) Thanks.

Slide Shows not behaving

I just spent last night going over iphoto 09 and found it very frustrating how the slide show settings would not change when requested.
To begin with I would create a new slide show, then adjust the settings and play. Sometimes the inital settings edit would work, but after the second edit on the settings it would revert to the initial settings. Any clues?

Same problem here, check out what I just wrote to Apple. Sorry it is lengthy but I like putting all the details.
Hello Apple, I have some bugs to report about the slide show ability in iPhoto iLife09. There just was an update for iPhoto, that was for a few things plus slide show export. After that up it seems like this problem is a little worse. For the bulk of us who just want to use iPhoto for the sideshow "not export" right now I can't. I've had this issue for a while, where I want to play songs from one of my play lists but only the first song will play now nothing at all. When I just last tried to play one, the slide show played no music and I could not get out of it period. Esc, Apple Q, control option esc, nothing worked, the photos for some reason where also cut off only showing half or only a third of the photos. Right now on my system there is a serious bug, glitch, or something causing this. Please help, I still love the other features to much now like the faces and places to go back to the iLife 08 version. I really need the slide show to perform well to show my photos off to others. Using iTunes was a pain but it was a work around, but now with the photos not even showing correctly I can't use it.

All System Groups/Services disappeared in ESB Control after redeploy

Hi all,
SHORT: all entries in the "Services" pane of the ESB control have suddenly disappeared.
DETAILED: After a few successful cycles of changing/deploying/running and viewing instances of my ESB service via the ESB control, I redeployed and run the application. The previously successful test I ran did not get a reply from the service. Obviously, this could be either due to me breaking the service with the last change or because of some crash in the SOA Suite. So I tried to get more information via the ESB console but all System Groups and Services have disappeared - the left "Services" pane is empty.
Restarting the SOA Suite does not fix this.
==> any suggestions on what could have happened and how to resolve this without reinstall ? (we don't want this to happen in production, do we ;-) ?)

two collegues of mine ran into a similiar problem. Their ESB console seemed empty as well.Until one of them let the console open for about 10 minutes and the services/system re-appeared.
Indicating that when the services do not show up could also be caused by a serious performance glitch or the services are calling external systems which time out.
Another option is to wait for a few minutes and see if your services etc show up again.
I don't know where this performance degradation is coming from though. The only thing I noticed is that the ORAESB schema ( advanced install ) is installing al of its objects in the USERS tablespace and that most ( almost all ) tables do not have any indexes / pk / fk's on them.
Maybe one or two indexes could speed up the ESB repository considerably.
Dave, In the upcoming 10.1.3.3 release is the repository in any way altered? Default tablespace? PK/FK and/or extra indices on certain tables/columns?

Do I have to have SP2 or can I use SP1 with the X

My Gaming Rig is I guess outdated to many of you:
P4c800E-Deluxe
P4 3.2
gig 3200
EVGA 6800 Ultra
*SB LIVE 5. Platinum
I know many of you here can tell that my 5. is causing me some issues.
It is. In fact my rig plays all the new games great with the exception of
audio. I feel that my 5. is causing me some if not all of the glitching and stuttering
Im getting is say FEAR for example. I just go SIN Emergence and I have serious
audio glitches.
So I came to the this forum to check out what people were saying about the new Platinum
cards. I had no idea of what I have been reading. I am a big ASUS fan for years now. After now well over a year of serious troubleshooting and analysis I am positi've that I must get a new Sound card Directx 9 compliant EAX 3+ and more.
BUT like most gamers none of us want or use SP in XP.
Will the X-FI Platinum or Fatality install and work if I just have SP?
Id really appreciate any assitance. Since my system is older it the X-FI might not suffer from some of the issues I am reading about. I am hoping so. But I will not go to SP2 and if I put the card in and load the drivers CD and it says you need SP2 I have wasted my money.
Thanks

If home sharing is setup and you have an IOS device that is on the same network you can download the remote app. Otherwise, you will need to purchase a new remote.

[CS5] Crash on Repousse

I'm experiencing a consistent crash every time I try repousse on a layer. The layer is 900x2400px, and has an irregularly shaped selection. The layer is larger than the document bounds.
I select the layer, choose 3D > Repousse from Layer, and then the Ground Plane appears, and a moment later, the application crashes. I have 4Gb of RAM on a Dell XPS M1730 running dual nVidia geForce 9800's.
Is there any documented limit on repousse layer size? If I reduce the layer to half the size, I get the repousse dialog box. Or is it because of the fact that the layer exceeds document bounds?
What are the known defects with Repousse - is there a list somewhere? This stuff seems far from polished.
T

Thanks very much for the reply, Chris. My PS is up to date, as are my nVidia graphics drivers. Unfortunately, if it IS a graphics driver issue, then I'm probably out of luck. My nVidia GeForce 8800M dual SLI video cards have been wonky in Creative Suite for a while now, and there doesn't seem to be any moves made on either the part of Adobe (who claims, possibly correctly, that it's nVidia's fault), nor on the part of nVidia (who has moved on to a new series of cards and seems to have abandoned further updates to its slightly older chipsets). Glitches include: brush cursor invisibility past a certain pixel dimension, window redraw issues, and serious UI glitches with palettes. It wouldn't surprise me if this were a graphics card issue then.
I did get repousse to work on the same image once I scaled it down such that it fit within the document bounds. Not sure whether the crashes were caused by the pure pixel size of the original layer, or by the fact that the layer was clipped by the document bounds.
Appreciate the feedback, Chris!
T

MSI 560 TI

Hello Recently I have been experiencing crashes while playing games. I experience some serious graphical glitches during and after this crash with purple and green lines. After the crash I have several issues that do not resolve unless I reboot my pc. It seems like any application that uses my GPU slightly does not wane start anymore and crashes as soon as it pops up (like Google chrome). Some other applications like windows media player do start but there graphically messed up. Game in general refuse to start and all crash immediately. I have been trying to solve this myself for more then a week now without any success. thank you in advance for your assistance.
Please ask me for whatever additional information you need.
postimg.org/image/b2wgmw989

Main Board: Asus M4A79 Deluxe
Bios Version: 4101
Video Card: Msi 560 Ti hawk stock oc
PSU: asus 500w
CPU: Phenom x4 II 965 BE
Memory: 8 gb Kingston hyperx ddr2 800 mhz
SSD/ HDD: HDD WD iT 7200 rpm
CPU COOLER: Coolmaster Hyper TX3 EVO
Raid Card: none
Sound Card: onboard
Any Additional hardware plugged into your system:
Mouse, keyboard, nostromo razer
OC: (Yes / No) No
Operating System: Windows 7 64 bit professional

Serious Keyframe Glitch

Similar Messages

Maybe you are looking for