Serious Logic Problem - Destroyed all my sounds...:(
Hey Guys !
While I was working on my project, something happened to my audio files.
Take a look: http://img145.imageshack.us/img145/6706/omgvs8.jpg
Everything is now destroyed... Can I get the files back in the original condition ?
If not, hours of work are destroyed...
And what is it that we're supposed to deduce from a tiny screengrab of an audio region?
What do you mean by "destroyed"..?
Similar Messages
-
A problem with ALL creative sound cards i am hav
All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
Specs are:
p4. 3.0
DFI Lanparty 875 rev. B
gig corsair pc4000 dual channel
2x raptor raid 0
SB Audigy 2 ZS Platinum Pro
ATI Radeon x800pro
Headphones i use are bose acoustic 2 headphones
Speakers are logitech x-530
If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
[edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AMfigured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.
-
Logic Pro X records (Audio) all the sounds of my computer when i plug in my guitar!
When i plug in my Guitar (iRig) in my MacBookPro Retina, Logic Pro records all the sounds of my Computer. Even the sounds from itunes. The problem is now, I can`t record more then one track because if i want to play another track over the first one, the sound of the first one is recorded on the second track too!:SSS Help!
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
Might want to read the chapter on how to set Logic's audio section for recording.
While you're there read a couple of the chapters on basic recording techniques. -
I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...
Very many thanks Niel. My problem solved in less than five minutes. I've never had to use that command before. I found the folder and copied it - but I'm still no clearer as to where it was!
Thanks again -
Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.
What happens when you play music? Do the hardware volume controls work when using the Music app?
-
please help me set up all the sound specs/preferences both hardware and software wise for logic x on mac book pro...i am unable to hear any audio playback when i record a track...no activity in output channel
itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport) -
How do I use logic as a mulit timbre sound module???
Whats up people,
Im trying to trigger all the sounds in logic via a hardware controller (mpc) separating everything on separate channels. I got it to read on just one channel at a time, but multi?? Forget about it.... I read other posts in regards to this same question and have run thru the suggestion switched midi setting to auto demix etc...
Doesn't respond if i go to another channel on my hardware and select the new instrument to the same channel in logic it still only allows playback from one channel at a time?? Huh is my theory even possible folks!?? I would think it is.
Im trying to comprehend the instructions in the manual for the environment setup, to see if i need to make any changes their. I thrown in a channel splitter, a seq input, a transformer but i have no idea if im doing it right?? I must be slow cos to me that enviroment chapter reads like riddles! (LAYMAN TERMS SOMEONE PLEASE!!)
If anyone can assist in this id appreciate it. Any and all suggestions are welcome.
Good lookin out
peace
D.Greetings people,
The latest.............okay where do i start. Well i actually followed everybody suggestion on this thread and actually as a result now understand the enviroment a little better. But i have still been unable to get my multi playback channels. I managed to get access to all 16 channels etc.
Right now i have my physical input going thru the monitor to the channel splitter, each channel is cabled to my audio instrument(which im assuming is the multi inst i created as to represent the mpc) channels are set to all and then i have the out of my audio instrument going to the seq input. I hear my sounds and have actually triggered the internal sounds from the mpc pads no problem (did that b4 i posted)
but now say i select midi channel 1 on my mpc, which in turn is instrument 1, double click it to get the audio window select ultrabeat, go back to the mpc and program some drums using ultrabeats sounds. Now remember all im doing is recording midi signals into my mpc which is triggering logics sounds right. okay so now, im saying i want to go to the next channel/audio instrument/ and now use sculpture and put a nice fat bass on it. so i select the patch i want hit play on my mpc hoping that it plays back the drums, but NO! now i have selected a new track it pulls over the programming i did for ultrabeat into the sculpture patch.....follow me??
I tested logic to just record one at a time in the arrange, and it does but it records real erratic. btw my mpc is strung up thru my midisport usb which i did select in the enviroment window..check!
I tried Mac's method of dragging the audio instrument into the arrange and selecting the track with a corresponding sub channel etc but got allot of midi feedback!!??? I know that going to settings - record-auto demix etc is supposed to do the trick, well it aint for me?? Please what am i doing wrong??
Ultimately i want to be able to program my mpc using logics sounds via the midi channels simultaneously, and then dump it all down into logic once i am happy with the outcome. Am i asking too much for logic to be a sound source and recorder at the same time??
I dont mean to sound naive or ignorant but i have just started using software for the first time. i use to go the hardware route using digital recorders allday but it was a simpler routing method since my sound sources were seperate(keyboards, sound modules etc). obviously now im tryint to intergrate my old style with the new, but im getting very fustrated and creativley lathalgic from this setback. Many have suggested tossing the mpc and using logic for drums, but sorry i just cant do it i love that boom bap to much.
Anway sorry for the rambling its late and ive just spent the last 5 hours beating my head upside the g5. If anyone out their hasd a similar setup to me whether successful or not, get at me lets trade off techniques and ideas.
Thanks again for taking the time to read the thread and offering your help, please keep it coming.
peace
D. -
After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer. -
Midi note grab: why do they all make sound?
When I am editing midi notes and I select, say, 3 measures of notes: As I'm selecting them ALL the notes make a sound. It's really loud and shocking to hear, especially with percussion.
Is there a way to turn this off while I am grabbing midi notes?I should weigh in here and say I knew that my remark might upset some, and it wasn't really a personal remark to the OP, more of a general "oy vey!".
The reason I said it was because this is a fairly fundamental part of Logic, available in all editor windows, and clearly has a consistent button (with tool tips).
I'm not berating anyone for not sitting and reading the manual for three months before installing the software, or expecting anyone to memorise it. But by and large, people run complicated software, and then go to the manual when stuck (actually, often they don't even do that then, even though it's under the help menu in front of them, they come and ask on forums etc).
Doing this is really not the best way to learn, in my view.
What I really recommend doing is when you have some free time, pick a chapter "Oh, today let's learn about the event editor", and just pick up the manual and read the event editor chapter. Do this from time to time, and I guarantee you'll find lots of "oh, I didn't realise that" and "ah that's cool" and "oh, so that's what that's for!" moments.
Note that in my response, it wasn't just a RTFM, I did in fact post a reasonably comprehensive answer.
And I personally find a little humour here welcome, as long as it's not intrusive and doesn't disguise the solutions and problem solving help - so please lighten up on some of the guys that do spend a lot of their own time helping others here, especially when the same "well I haven't read the manual but how do i..." questions come up time and time again - I consider a little fun to be some small relief and enjoyment about contributing here.
Without that, I think I'd probably go mad and leave... -
Problem with recording and sound on Pavilion ze1000 series
I have an old Hp Pavilion ze 1250 running Windows XP (sp2) with 1gb Ram.
I'm trying to convert some cassette tapes to digital (with Audacity).
My problem: When I try to record using Audacity, it records about 10 seconds and then hangs. When I click Stop and try to play the 10 seconds back, it freezes and won't play anything. (After that, even if I import an mp3 file to work on, it won't play that either.) It also causes all the sound to go off throughout the computer. Songs will "play" in WMP but there's no sound in the speakers or headphones. (The Microsoft logo music won't play either when I turn the computer off.) I've tried resetting the volume and checking if anything is muted. Nothing .
I restart the computer and everything is fine.....sound works and Audacity plays.....until I try to record again.
I thought that this was only an Audacity problem....until I tried to record 60 seconds through Sound Recorder. The exact thing happens. It records about 10 seconds of audio, then freezes and refuses to playback. All the sound goes off throughout the computer and nothing solves it except Restart.
My sound/audio device is Conexant AC-Link Audio.
The Sound Playback, Sound Recording, Voice Playback, and Voice Recording are all defaulted to HP VIA Audio.
I have updated the audio driver. Recording is enabled. Is there something else I need to do?
Thanks.Thank you for your reply.
I'll try some of those suggestions and see if that helps. -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload? -
I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all.
I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy. I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval. Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again -
Serious performance problems after updating from 10.5.6 to 10.5.7
I've got a Macbook Pro C2D 15" (late 2006). After updating the system from 10.5.6 to 10.5.7 and quicktime to 7.6.2, I experience serious performance problems which I have never seen before:
-From time to time, kernel_task has peaks in activity monitor (consumes a lot of CPU). In that moment, the mouse hangs for a short moment and audio playback is distorted/has drop outs.
-Recording audio consumes a lot of CPU (independent of the audio application).
-Video playback consumes a lot of CPU, regardless if I use VLC or the quicktime player.
Any idea what could be done? Thanks in advance.After a few days of using CoolBook I report that my 1st generation MacBook Air is now reliable and never overheating, regardless of environment conditions.
I must point out that I do believe that it really is something new in 10.5.7 that is causing this problem as my environmental conditions have not changed and even Summer in Dublin still sees temperatures no more than 72F/22C. I am now in Madrid, where the environment is quite different, and I am still having no problem with kernel_task spinning.
I plan on reporting my problem to Apple anyway and being aggressive about the issue as MacLovinRanga did in this thread (http://discussions.apple.com/thread.jspa?messageID=9647353#9647353). Perhaps many/all of those of us having this problem will obtain new MacBook Airs.
Joe Kiniry -
The logical problem in turnover in for ?
Welcome
wrote this code, everything is true but there is a logical problem to be solved first idea of this program is a moving train to the contrary, it can stop and operated once again and that can add cars and locomotives and can delete it but there is a problem when adding that the train carriages have remained stable cart after the first turnover Thus ...
THAT shows us the error ..
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Train extends JFrame implements ActionListener{
private boolean check = false;
private boolean stopped = true;
private boolean add = false;
private int trainPlace = 0;
private int INDEX_START = 0;
public int speed = 300;
private ImageIcon CurrentImage ;
private boolean front=true, back=false ;
private int carrNum = 0 ;
private JPanel screen, area , controlroom;
private JButton[][] street;
public JButton[] keybord;
private String s[] = {"Start","Back","Fast","Slow","Add Carriage","Delete Carriage","Rest","Check","Desiners"};
private ImageIcon images[][] ={{
new ImageIcon("images/UpRight.jpg"),
new ImageIcon("images/RightDown.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/NoTrack.jpg"),
{new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/DownRight.jpg"),
new ImageIcon("images/Horiz.jpg"),
new ImageIcon("images/RightDown.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/UpRight.jpg"),
new ImageIcon("images/Horiz.jpg"),
new ImageIcon("images/RightUp.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/DownRight.jpg"),
new ImageIcon("images/RightUp.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/NoTrack.jpg"),
new ImageIcon("images/NoTrack.jpg")}};
private ImageIcon frontImagesTrain[]={
new ImageIcon("images/TrainDown.jpg"),
new ImageIcon("images/TrainDown.jpg"),
new ImageIcon("images/TrainLeft.jpg"),
new ImageIcon("images/TrainLeft.jpg"),
new ImageIcon("images/TrainDown.jpg"),
new ImageIcon("images/TrainLeft.jpg"),
new ImageIcon("images/TrainUp.jpg"),
new ImageIcon("images/TrainUp.jpg"),
new ImageIcon("images/TrainUp.jpg"),
new ImageIcon("images/TrainUp.jpg"),
new ImageIcon("images/TrainRight.jpg"),
new ImageIcon("images/TrainDown.jpg"),
new ImageIcon("images/TrainRight.jpg"),
new ImageIcon("images/TrainDown.jpg")};
private ImageIcon trackImagesTrain[]={
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/RightUp.jpg"),
new ImageIcon("images/Horiz.jpg"),
new ImageIcon("images/UpRight.jpg"),
new ImageIcon("images/RightUp.jpg"),
new ImageIcon("images/DownRight.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/Vert.jpg"),
new ImageIcon("images/UpRight.jpg"),
new ImageIcon("images/RightDown.jpg"),
new ImageIcon("images/DownRight.jpg"),
new ImageIcon("images/Horiz.jpg"),
new ImageIcon("images/RightDown.jpg")};
private ImageIcon carrinImagesTrain[]={
new ImageIcon("images/Carriage1Down.jpg"),
new ImageIcon("images/Carriage1Down.jpg"),
new ImageIcon("images/Carriage1Left.jpg"),
new ImageIcon("images/Carriage1Left.jpg"),
new ImageIcon("images/Carriage1Down.jpg"),
new ImageIcon("images/Carriage1Left.jpg"),
new ImageIcon("images/Carriage1Up.jpg"),
new ImageIcon("images/Carriage1Up.jpg"),
new ImageIcon("images/Carriage1Up.jpg"),
new ImageIcon("images/Carriage1Up.jpg"),
new ImageIcon("images/Carriage1Right.jpg"),
new ImageIcon("images/Carriage1Down.jpg"),
new ImageIcon("images/Carriage1Right.jpg"),
new ImageIcon("images/Carriage1Down.jpg")};
private int[]frontPath={13, 18,17,16,21,20,15,10,5,0,1,6,7,8};
private int[]frontPath2={8, 13,18,17,16,21,20,15,10,5,0,1,6,7};
private ImageIcon icon;
private JLabel labelInfo;
public Train () {
screen = new JPanel(new GridLayout(1,1));
Font f =new Font ("Sanserif",Font.BOLD,18);
labelInfo = new JLabel("WELCOM" ,JLabel.CENTER);
labelInfo.setFont(f);
screen.setBackground(Color.red);
screen.add(labelInfo);
getContentPane().add(BorderLayout.NORTH,screen );
street = new JButton[5][5];
area = new JPanel (new GridLayout(5,5));
for(int r=0; r<5; r++)
for (int c=0; c<5; c++){
street[r][c] = new JButton("", images[r][c]);
area.add(street[r][c]);
getContentPane().add(BorderLayout.CENTER,area );
keybord = new JButton[9];
controlroom = new JPanel(new GridLayout(5,2));
// ActionHandler handler = new ActionHandler();
for (int i=0; i <9; i++)
keybord[i] = new JButton(s);
keybord[i].addActionListener(this);
controlroom.add(keybord[i]);
keybord[i].setEnabled(false);
keybord[7].setEnabled(true);
getContentPane().add(BorderLayout.SOUTH,controlroom );
public void moveTrainFront(){
int trainPlace1 = trainPlace;
try{
if (trainPlace == frontPath.length-1) trainPlace = 0;
else trainPlace ++;
if (carrNum == 0 )
int i = frontPath[trainPlace]/5;
int j = frontPath[trainPlace] - i * 5;
int r = frontPath[trainPlace1]/5;
int c = frontPath[trainPlace1] - r * 5;
street[i][j].setIcon(frontImagesTrain[trainPlace]);
street[r][c].setIcon(trackImagesTrain[trainPlace1]);
else
int i1 = frontPath[trainPlace]/5;
int j1 = frontPath[trainPlace] - i1 * 5;
street[i1][j1].setIcon(frontImagesTrain[trainPlace]);
int trainPlace2 = trainPlace;
for (int z = 1; z <= carrNum; z++)
if (trainPlace2 - z < 0) trainPlace2 = 13;
int i2 = frontPath[trainPlace2 - z]/5;
int j2 = frontPath[trainPlace2 - z] - i2 * 5;
street[i2][j2].setIcon(carrinImagesTrain[trainPlace2 - z]);
int r1 = frontPath[trainPlace1 - carrNum]/5;
int c1 = frontPath[trainPlace1 - carrNum] - r1 * 5;
street[r1][c1].setIcon(trackImagesTrain[trainPlace1 - carrNum]);
}catch(ArrayIndexOutOfBoundsException aiex){System.out.println("the array out of index");}
// Move train Back
public void moveTrainBack(){
int trainPlace1 = trainPlace;
try{
if (trainPlace == 0) trainPlace = 13;
else trainPlace--;
int i = frontPath[trainPlace]/5;
int j = frontPath[trainPlace] - i * 5;
int r = frontPath[trainPlace1]/5;
int c = frontPath[trainPlace1] - r * 5;
street[i][j].setIcon(frontImagesTrain[trainPlace]);
street[r][c].setIcon(trackImagesTrain[trainPlace1]);
}catch(ArrayIndexOutOfBoundsException aiex){System.out.println("the array out of index");}
public void setRest(){
setStop(true);
setSpeed(300);
int i = frontPath[trainPlace]/5;
int j = frontPath[trainPlace] - i * 5;
street[i][j].setIcon(trackImagesTrain[trainPlace]);
trainPlace = 0;
i = frontPath[trainPlace]/5;
j = frontPath[trainPlace] - i * 5;
street[i][j].setIcon(frontImagesTrain[0]);
public void setCheck (boolean c)
int i = frontPath[trainPlace]/5;
int j = frontPath[trainPlace] - i * 5;
street[i][j].setIcon(frontImagesTrain[0]);
check = c ;
public boolean getCheck (){ return check ;}
public void setSpeed (int s){speed = s ;}
public int getSpeed(){return speed;}
public void setStop(boolean s){stopped = s ;}
public boolean getStop(){return stopped ;}
public void setBack(boolean s){back = s ;}
public boolean getBack(){return back;}
public void setAdd(){carrNum++ ;}
public boolean getAdd(){return add;}
// Action
public void actionPerformed(ActionEvent e){
if(e.getSource()==keybord[0])//Start
if (stopped)
keybord[0].setText("Stop");
setStop(false);
labelInfo.setText("Running");
else
{ setStop(true);
keybord[0].setText("Start");
labelInfo.setText("Stop");
if(e.getSource()==keybord[1])//Front And Back
if (!back)
setBack(true);
keybord[1].setText("Front");
labelInfo.setText("Back");
else
setBack(false);
keybord[1].setText("Back");
labelInfo.setText("Front");
} else if (e.getSource()==keybord[2])//Fast
if (speed <= 0)
labelInfo.setText("You've arrived the maximum speed : " + getSpeed());
else { setSpeed(speed - 10);
labelInfo.setText("The Train speed is slow down to : " + getSpeed());
else if(e.getSource()==keybord[3])//Slow
{setSpeed(speed + 10);
labelInfo.setText("The Train speed is pulled up to : "+getSpeed());
else if(e.getSource()==keybord[4]) //ADD carrin
setAdd();
labelInfo.setText("Add Carriage");
//setStop(false);
else if(e.getSource()==keybord[5]) //Delete carrin
labelInfo.setText("Delete Carrin");
else if(e.getSource()==keybord[6]) //Rest
setRest();
labelInfo.setText("Rest");
else if (e.getSource()==keybord[7]) //Check
setCheck(true);
keybord[7].setEnabled(false);
keybord[0].setEnabled(true);
keybord[1].setEnabled(true);
keybord[2].setEnabled(true);
keybord[3].setEnabled(true);
keybord[4].setEnabled(true);
keybord[5].setEnabled(true);
keybord[6].setEnabled(true);
keybord[8].setEnabled(true);
labelInfo.setText("The Train is Checked");
else if(e.getSource()==keybord[8]) //desiners
String x = "";
labelInfo.setText("Desiners About");
JOptionPane.showMessageDialog(null,"The Progect is Under The Auspices of:"
+ "\n??" + "\n" + "\n ??" +
"\n ??" + "\n??" + "\n ??" + "\n" + "\n" + "\n?? " + "\n C 2007"); }
This main ..
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.lang.Thread;
public class TestTrain{
public static void main(String[]args){
Train train = new Train ();
MoveTrain mt = new MoveTrain(train);
train.setTitle("Train");
train.setSize(421,550);
train.setVisible(true);
train.addWindowListener (
new WindowAdapter (){
public void windowClosing(WindowEvent e ){
System.exit(0);
mt.start();
}This Threads
import java.lang.Thread;
public class MoveTrain extends Thread {
Train train ;
public MoveTrain (Train train){
this.train= train;
public void run(){
while(!train.getCheck());
while (train.getCheck()){
try {sleep (train.getSpeed()); }
catch (InterruptedException e ){System.out.println("unknown error");}
if (!train.getStop())
if(!train.getBack())
{train.moveTrainFront();
else train.moveTrainBack();
}This Link image icon ..
http://www.geocities.com/alhairan_2003/as/777/UpRight.jpg
http://www.geocities.com/alhairan_2003/as/777/Vert.jpg
http://www.geocities.com/alhairan_2003/as/777/TrainUp.jpg
http://www.geocities.com/alhairan_2003/as/777/TrainRight.jpg
http://www.geocities.com/alhairan_2003/as/777/TrainLeft.jpg
http://www.geocities.com/alhairan_2003/as/777/TrainDown.jpg
http://www.geocities.com/alhairan_2003/as/777/Train.jpg
http://www.geocities.com/alhairan_2003/as/777/RightUp.jpg
http://www.geocities.com/alhairan_2003/as/777/RightDown.jpg
http://www.geocities.com/alhairan_2003/as/777/NoTrack.jpg
http://www.geocities.com/alhairan_2003/as/777/Horiz.jpg
http://www.geocities.com/alhairan_2003/as/777/DownRight.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage3Up.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage3Right.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage3Left.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage3Down.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage2Up.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage2Right.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage2Left.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage2Down.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage1Right.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage1Left.jpg
http://www.geocities.com/alhairan_2003/as/777/Carriage1Down.jpg
thanks :)String[] car1Names = {
"Carriage1Down", "Carriage1Left", "Carriage1Down", "Carriage1Right"
};The first image name should be "Carriage1Up" but it is missing in your directory.
import java.awt.*;
import java.awt.event.*;
import java.awt.image.BufferedImage;
import java.io.*;
import javax.imageio.ImageIO;
import javax.swing.*;
public class MC6 implements Runnable, ActionListener {
JLabel[] grid;
BufferedImage[] trackImages;
BufferedImage[] trainImages;
BufferedImage[][] carImages;
int[] imageKeys;
int[] trackKeys;
int[] forwardKeys;
int[] reverseKeys;
int keyIndex = 0;
int carCount = 0; // [0 - 3]
boolean goingAhead = true;
boolean changeDirections = false;
Thread thread = null;
boolean moving = false;
final int DELAY = 1000;
public MC6() {
loadImages();
public void actionPerformed(ActionEvent e) {
String ac = e.getActionCommand();
if(ac.equals("START"))
changeDirections = false;
start();
if(ac.equals("STOP"))
stop();
if(ac.equals("FORWARD") || ac.equals("REVERSE"))
changeDirections = true;
if(ac.equals("ADD CARRIAGE"))
carCount += (carCount+1 <= 3) ? 1 : 0;
if(ac.equals("REMOVE CARRIAGE")) {
int carIndex = getCarIndex(carCount);
int trackIndex = trackKeys[carIndex];
int imageIndex = imageKeys[carIndex];
grid[trackIndex].setIcon(new ImageIcon(trackImages[imageIndex]));
carCount -= (carCount-1 >=0 ) ? 1 : 0;
public void run() {
while(moving) {
// Clear track in preparation for next advance.
if(changeDirections) {
clearTrack();
// Adjust keyIndex by one increment in the direction of travel
// to allow it to return it to its current position after the
// next advance in position (further below).
advance();
goingAhead = !goingAhead;
changeDirections = false;
} else {
// Replace last car with track image before train advances.
int carIndex = getCarIndex(carCount);
int trackIndex = trackKeys[carIndex];
int imageIndex = imageKeys[carIndex];
grid[trackIndex].setIcon(new ImageIcon(trackImages[imageIndex]));
// Move to next position on the track.
advance();
// Set locomotive.
setLocomotive();
// Set the cars following the locomotive.
setCars();
try {
Thread.sleep(DELAY);
} catch(InterruptedException e) {
System.out.println("interrupted");
stop();
private int getCarIndex(int carNumber) {
int n = carNumber;
int index;
if(goingAhead) {
index = keyIndex-n;
if(index < 0)
index += trackKeys.length;
} else {
index = (keyIndex+n) % trackKeys.length;
return index;
private void advance() {
keyIndex = goingAhead ?
(keyIndex+1 > trackKeys.length-1) ? 0 : keyIndex+1
(keyIndex-1 < 0) ? trackKeys.length-1 : keyIndex-1;
private void clearTrack() {
// Remove all cars from track before direction change.
for(int j = 0; j < carCount; j++) {
int carIndex = getCarIndex(j+1);
int trackIndex = trackKeys[carIndex];
int imageIndex = imageKeys[carIndex];
grid[trackIndex].setIcon(new ImageIcon(trackImages[imageIndex]));
private void setLocomotive() {
int trackIndex = trackKeys[keyIndex];
int imageIndex = goingAhead ? forwardKeys[keyIndex]
: reverseKeys[keyIndex];
grid[trackIndex].setIcon(new ImageIcon(trainImages[imageIndex]));
private void setCars() {
for(int j = 0; j < carCount; j++) {
int carIndex = getCarIndex(j+1);
int trackIndex = trackKeys[carIndex];
int imageIndex = goingAhead ? forwardKeys[carIndex]
: reverseKeys[carIndex];
grid[trackIndex].setIcon(new ImageIcon(carImages[j][imageIndex]));
private void start() {
if(!moving) {
moving = true;
thread = new Thread(this);
thread.setPriority(Thread.NORM_PRIORITY);
thread.start();
public void stop() {
moving = false;
if(thread != null)
thread.interrupt();
thread = null;
private void loadImages() {
String[] trackNames = {
"UpRight", "RightDown", "Vert", "DownRight", "Horiz", "RightUp", "NoTrack"
String[] trainNames = { "TrainUp", "TrainLeft", "TrainDown", "TrainRight" };
String[] car1Names = {
"Carriage1Down", "Carriage1Left", "Carriage1Down", "Carriage1Right"
String[] car2Names = {
"Carriage2Up", "Carriage2Left", "Carriage2Down", "Carriage2Right"
String[] car3Names = {
"Carriage3Up", "Carriage3Left", "Carriage3Down", "Carriage3Right"
trackImages = getImages(trackNames);
trainImages = getImages(trainNames);
BufferedImage[] car1Images = getImages(car1Names);
BufferedImage[] car2Images = getImages(car2Names);
BufferedImage[] car3Images = getImages(car3Names);
carImages = new BufferedImage[][]{ car1Images, car2Images, car3Images };
private BufferedImage[] getImages(String[] ids) {
BufferedImage[] images = new BufferedImage[ids.length];
for(int j = 0; j < ids.length; j++) {
String path = "images/" + ids[j] + ".jpg";
try {
images[j] = ImageIO.read(new File(path));
} catch(IOException e) {
System.out.println("Read error for " + path +
": " + e.getMessage());
images[j] = null;
return images;
private JPanel getCenterComponent() {
imageKeys = new int[] {
0, 1, 3, 4, 1, 2, 5, 4, 0, 5, 3, 2, 2, 2
trackKeys = new int[] {
0, 1, 6, 7, 8, 13, 18, 17, 16, 21, 20, 15, 10, 5
forwardKeys = new int[] {
0, 3, 2, 3, 3, 2, 2, 1, 1, 2, 1, 0, 0, 0
reverseKeys = new int[] {
1, 0, 1, 1, 0, 0, 3, 3, 0, 3, 2, 2, 2, 2
grid = new JLabel[25];
JPanel panel = new JPanel(new GridLayout(5,0));
for(int j = 0; j < grid.length; j++) {
ImageIcon icon;
int index = getIndexForValue(j);
if(index != -1) {
icon = new ImageIcon(trackImages[imageKeys[index]]);
} else {
icon = new ImageIcon(trackImages[6]);
grid[j] = new JLabel(icon);
panel.add(grid[j]);
return panel;
private int getIndexForValue(int value) {
for(int j = 0; j < trackKeys.length; j++) {
if(value == trackKeys[j])
return j;
return -1;
private JPanel getControls() {
String[] ids = {
"Start", "Stop", "Forward", "Reverse", "Add Carriage", "Remove Carriage"
JPanel panel = new JPanel(new GridLayout(0,2));
for(int j = 0; j < ids.length; j++) {
JButton button = new JButton(ids[j]);
button.setActionCommand(ids[j].toUpperCase());
button.addActionListener(this);
panel.add(button);
return panel;
public static void main(String[] args) {
MC6 test = new MC6();
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(test.getCenterComponent());
f.getContentPane().add(test.getControls(), "Last");
f.pack();
f.setLocation(200,100);
f.setVisible(true);
}
Maybe you are looking for
-
Hello, Here is what I have: a dual 1.8 with a Granite Digital 1.6TB RAID 5 tower. This acts as the server. Connecting to it is a Dual 2.7 via giga-bit and a laptop wirelessly. All RAW files are on the RAID 5. We shoot primarily weddings with two phot
-
I updated and now firefox will not launch
I updated to firefox 8 and now I cant open the browser
-
WLST v8.1 sp6: Problem with ConfigurationAuditType and UnixMachine
Hi, when using WLST v8.1 sp6 to build a Domain, I can't find the attribute 'ConfigurationAuditType' at the Domain level - I want to change it from the default to 'log'. Are there some attributes that aren't available for manipulation with WLST v8.1 ?
-
Strange linking problem - Only part of word will link
I created a website for my boss to sell his home but there is one link on the entire site that does not work. I haven't seen this problem before. The URL is www.foxpointhouse.com and the link in question is the text link on the right sidebar called "
-
Java(TM) Plug-in Fatal Error Cannot load class sun/plugin javaRunTime. The Bridge was installes at <C:\PROGRA~1\Java\JRE15~1.0_0> but the class is not there Modify the registry key to reflect the new bridge location the key is HKEY_LOCAL_MACHINE\SOFT