Serious Motion 5 audio problem

I add a clip with clean (waveform examined) audio into Motion 5, process it through "Analyze Motion". On playback, there is an unholy audio blast through the speakers when the playhead passes each of the first two keyframes. If I export the clip, the sound artifacts are quieter but still there. Examining the audio in the output clip, the waveform becomes a solid bar that goes off the top of the scale where the problems are.
That was on my Mac Pro. I replicated the procedure on my iMac with exactly the same results.
Both machines are on separate UPSs on separate electrical circuits and both run OS X 10.6.8.
Mac Pro 6-core 3.33-12Gb, iMac 24" 3.06 Core Duo 8Gb, MacBook Pro 13" 2.7 Core i7 8Gb

The clip is a DV clip of an an egret flying. I had applied Analyze Motion from the Motion Tracker folder and manually entered a number of keyframes. I can't recall what other actions I took, if any, because I was just playing around trying to learn the program. I thought that if I went back to the autosave versions of the motn file, I might be able to figure it out, so I reloaded one and it reproduced the problem as before.
I then moved the motn file from the Autosave folder into a "Motion Problem" folder while assembling all the relevant elements for submission (to?). When I reload this file back into Motion from there, the problem is gone. Nor does it reappear when I put the motn file back into autosave and run it from there.Very bizarre!
I have made a jpeg of a comparison of the audio waveforms of the original clip and the problem output clearly showing the nasty artifacts but don't know where to send it.
Until I reproduced the situation from scratch (short term memory okay) on my iMac, I thought the problem might be related to the random audio popping I'm getting on my Mac Pro. I suppose I had best just keep my speaker volume low and hope that it doesn't happen again.

Similar Messages

Weird audio problems with Motion when exporting quicktime videos

I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
Here's what i'm using:
Mac Pro dual 3.0 Xeon
10 gigs of RAM
Motion 2.1.2

hi,
motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
hope this helps
adam

70" Aquos LED, Serious motion-blur problems. Help

I have a LC70LE732U 70" Sharp Aquos LED HDTV, and I can't help but notice the serious motion-blur. When watching fast-paced movement (such as a baseball soaring through the air), the blur/lag is incredible. Is there any specific reason as to why this happens on this extremely expensive and so-called "high quality" television? If so, are there any settings that I can set my TV to in order to rid of this highly noticable problem? Thanks.

All signals, broadcast and recorded (DVD, BLu-ray, etc) are 60 Hz. No amount of doubling, tripling, etc, will get rid of it. If you have turned on Smooth-motion, and still get the lag, you'll just have to live with it. Since the original sighanl is recorded, encoded and broadcast at 60Hz, the lag will be there.
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

MIDI and Audio problems

1. The MIDI problem............the only way to explain this is by an example. I recorded something from my M-audio axiom keyboard, just something simple like a c major scale. Then i saved it reopened it then i played it back it now is a b major scale. If i open the matrix editor its still C but plays back in B and i must transpose it to make it normal. Never have i had this happen before. Has anyone else had this happen? How can i fix it?
Another MIDI problem is sometimes when i play back a MIDI performance it slows down and sounds like slow motion until it stops and says "sample rate 86672 recognized" i am at a loss on this one.
The Audio problem is simply that i get distortion in my recordings but none of my preamps clip. i can even have the gain half of what i would normally set it at, and it sounds distorted.
Any help would be great thanks
Mac Pro Mac OS X (10.4.8)

Possibilities...
There's a (now common) bug that causes bogus data to appear in the Global Transpose track, all by itself, and if the data that got entered was "transpose -1", then your C-major scale will indeed play back in B. To investigate whether this is the cause, open your Global Track display and see if there's any transpose data written in there. If so, delete it and see if that changes the situation for the better.
Another common thing to happen, that's not a Logic bug, is that pitchbend data might get "stuck" at wheel=down. If Logic isn't set up to reset PB (check your MIDI prefs), then the PB data won't be corrected, and will stay "low" util you reset it manually, i.e., flinging the PB wheel/level to reset it to zero. This is probably the best explanation for why Logic will seem to "repair" itself when you reboot/relaunch, because usually upon reboot/relaunch Logic sends out reset messages for things like PB.
As to the sample rate thing, I take it that you're recording at 96K? Or maybe 88.2? If so, you have a clocking problem somewhere.

Premiere Pro 7.1 serious Multicam Editing problems

Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
I have two serious Multicam Editing Problems.
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
I would be grateful with your help.
Thank you,
Stavros Symeonidis

The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
I remind you that this only happens when multicam monitor is toggled at the program monitor.
Did all these help at all to even reproduce this situation?
Thank you,
Stavros Symeonidis

Audio problems frustrating newbie!

As a newbie to Apple products I find myself frustrated with audio problems on my new iMac. In the project browser the video is fine, audio in sync, no video hesitation, but when I view the finished product in full screen mode I get audio out of sync, periods of no audio at all and freezing frames. I burned the project onto a dvd and again, although the project is perfect the dvd download is the same as the full screen preview, scenes freeze,and hesitates and there are lengthy periods of no sound. I've rechecked all aspects of voice overs, music etc, nothing seems out of whack and the movie runs perfectly in project mode. Any ideas? I've read on other forums that this is a problem with imovie11. This is not a happy introduction to Apple!

All I can say is this is by no means a bug free product. But the price is right. I've used imovie for a couple of years. When stuff happens, you can definitely post on this site because the help is very good. But at the end of the day, you have to burn cycles, step back and really analyze what the heck happened and could have cause this issue.
Video can be ******* complicated. The more complicated it gets, the more you should bite the bullet and hit the learning curve and get yourself a copy of final cut. It's a steep learning curve, but it's a serious app. I have no idea what's going on with your problem. Hope you solved it..?
Anyhow, good luck.
BTW, Mac's are not perfect, but light years more enjoyable the Winblows and bloated operating systems of that variant. Don't throw it out the window yet.

Extracted Audio Problem

Hello, I'm having a problem with my current project in iMovieHD. I learned through bitter experience that it was a good idea to extract/lock my audio back when I was using iMovie 4. Since using iMovieHD I have continued this practice, even though people tell me the shifting audio problem is no longer an issue. Anyway, today I extracted & locked the audio before I burned the DVD, and I find that the audio has been corrupted. It just makes random popping noises. When I put it in "View Waveform" mode, I can clearly see that the audio is still there. It just won't play now. Any suggestions as to what I can do to fix this problem. I can't go back to unextracting the audio now - too late for that. HELP!

Well, the back and forth using the camera worked - but it was a lot of labor. First I erased the two hundred or so other clips other than the five I wanted to work with. UN-extracted the audio, with the clips still in Slow Motion, and exported to the camera (which functioned, luckily). Quit iMovie, did not save the changes, and opened her back up, and re-imported the clips. Worked like a charm. Just like you said, it tricked iMovie into thinking the slow motion clip was just how the regular clip played. Stupid computer, haha.
Lastly, just to clear it up. I was attempting to slow the clip AND the audio down the same, so, for instance, like when someone yells "Noooooo," it makes the voice deeper and longer. It's funny. But when I would extract the audio from the clip, it would go all Matrix and funky on me. No big deal anymore.
And what the heck are you doing up at 4:45 in the morning? lol. Anyway, thanx for your input and time - I really appreciate it. All seems well. Thanks again, Matt.

FCPX audio problems

I have a lot of audio problems with some clips imported into FCPX.
I have a real normal clip in most cases, with audio that plays regularly, 100% audio on any media player.
But when I import it to FCPX, it has those waveforms that indicate that there is audio in the clip, but when I play the clip in FCPX, it starts off great, but in the middle, the audio just cuts, and I have a video where there is no audio where the audio is supposed to be.
Any solutions? I don't think it's the video's fault, nor my computer's problem. Mabye it's the external hard drive that's causing these problems, as I'm using a external hard drive to make these videos.
The video I made that didn't have audio in the middle was made in Motion.

Thank you SO MUCH!!
That worked perfectly, and my intro video is working again with perfect audio!
Thanks again!

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Serious and Sudden Problem with Z10 NEED HELP PLEASE

I have a z10, one of the first that came out in Toronto (if it makes a
difference), a couple of hours ago I came across a serious and sudden
problem.
I was able to swipe left and right between pages of apps, even drop down
from the top, but I cannot open anything, not even make a call or settings
options.
Any time I try to, for a split second it looks like its about to load
something then nothing. (image slides to the right quickly and goes back on
every attempt)
So I first did a reset, same problem, then I did a battery pull (about 15 minutes) and problem presisted.
I tried through USB to do a backup on blackberry manager and perhaps do a
re-install of everything, however when I was prompted for the password of
my device on my PC it kept telling me it was an incorrect password (I use
this blackberry on my computer 4-7 days a week, twice a day sometimes for a
year and I have never miss typed my password nor have i changed it)
After trying everything to make sure the first letter maybe was upper/lower
case, even my other possible phone password, nothing worked..
On the 5th failed attempt my phone prompted me to type 'blackberry', which
i did, then i typed my password on my phone which i type in about 15 times
a day becuase I set my phone to a 5 minute lock and still said it was incorrect.... I am no on 9/10 attempts and lost
for options.
Please if anyone can give me any suggestions, or even how to backup my phone
and whipe it now, or I have an earlier backup form 4 months ago that I
wouldnt mind going back to in worst case scenario.
Thank you for your help in advance,
Solved!
Go to Solution.

Sorry, no I haven't experienced that. It could be from an app you downloaded but that's just a guess. Wiping the device will tell us a lot. If the device still doesn't work you'll want to reload the OS using BB Link. if it still doesn't work after that then warranty support will be necessary through Rogers.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

Serious Motion 5 audio problem

Similar Messages

Maybe you are looking for