Serious problem. pls help !!!!!!!!!

some "khar, khar sound is coming from below of the keyboard of my hp g6 pavillion 2231 all the time when the lapton is on. what to do. i am fed off of that noise. pls help!!!!!!!!
This question was solved.
View Solution.

Hi
Sorry khar khar ???? Mainly any sounds from under the keyboard would be Fan or HDD either way could mean either the Fan ( if fan ) is struggling to move due to dust build up OR the hard drive is failing ,,, It's difficult to give you a firm answer without more information . Can you tell the difference between the fan noise and a hard drive noise ?? When you start up from cold does the noise start immedietly or is it only heard after say 5-10 minutes ?????? Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

Boot problem == pls HELP

I have use the utility disk and format the machintos drive , and use Extended (Journaled , Encrypted) , it ask me for a password (typed the password, confirmed the password - done) , after that i tried to install a fresh copy of Lion (i waited to be downloded from apple.com - done) after that it said that the fresh copy it will be installed and it will reboot by itself -> done ... from here the problem it's starting .... now my macbook air , it dosent start anymore it keep showming me, instaid of the apple sign from the start , a sign like the one from ghost busters (but without the ghost in it ) , i have tried to boot from cd , from usb , nothing dosent seams to be working.
If anyone know a solution to this problem, pls HELP! Thank you in advance...
p.s. before i had 2 hard drives that show up when i press the ALT button (machintos hd and utility drive, or something like that) now.. the only thing that it's showing me is : mac os base system , and if i try to use partition magic or something else, from a usb, it will tell me something about a bootguard , but i don't know how to insert the password.

Glad your issue is fixed. Thanks for the update!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

HelpMac mail sends emails prematurely while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

Help. Mac mail sends myemails prematurely while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

Serious Problem. Help!!!

Hi. Im having some serious problems. Some of my programs refuse to load. None of the Microsoft Office programs will open. Omnidisksweeper wont load, nor will Windows Media Player. I used Microsoft Word this morning. Now nothing. I ran Monolingual and have no idea if that messed it up or not. Pleeeease help!

I did the same thing with the same results- only native intel apps, no rosetta. I installed in place via the disc one of the system discs and everything was back to normal.
btw, I only saved 360 mgs with monolingual- seems somewhat shy of what I was expecting- having heard there were close to 2 gigs worth on other posts regarding monolingual.

Import problem,pls help!

Hi,there,
I'm new guy here,I'v got a problem about Import in table mode,I found I can import back all records successfully, but it just appends all records into the orignal table,not overwrite
it,for example, I made a export for a table with 2 records, after then I added some records into that table,
finally I made an import for that table, I found the
total of records is not recovered to 2,but just append
the records from export file,why can't I recover it to 2
record? pls help me,thanks!

All that import does is to run a bunch of SQL statements based on the content of the export file. If you look at the export file in an editor (if its small), or through type (on Windoze) or more on *NIX you will see stuff like:
CREATE TABLE x STORAGE ( ...)
INSERT INTO x col12,col2, ...
VALUES (:b1,:b2, ...
If you give imp the paramter ignore=Y, then the error generated by the CREATE TABLE (table already exists) will be suppressed, but the ata will be inserted. Note that there are no DROP TABLE or TRUNCATE TABLE commands in the export file.
If you want to restore your database to a particular point in time using import, then you will need to manually drop or truncate the tables first. You can generate the required sql from the data dictionary. something like
SET lines 1000 pages 0 feedback off trimspool on;
SPOOL drop.sql;
SELECT 'DROP TABLE '||table_name||';'
FROM user_tables;
SPOOL OFF;
@drop.sqlHTH
John

Weird Problem pls help.

Hi guys I have a big problem that I can't figure out. See I have a PT880 Neo and on the mobo box it says it's VIA. But when I go to install the Hyperion 4 in 1 mobo drivers my system crashes. When I boot up I get a Bsod stating my graphics card is in an infinite loop and says the video driver for my card is the problem. Also when I go to install new hardware it doesn't detect it. I checked the bios and pnp is enabled. So I put a new network card in and it will only detect it in the top pci slot so is this some kind of glitch am I downloaded the right drivers? The hyperion 4 in 1's version 455vp1 pls help

I need your full system specs + PSU specs.
Read these guides as well >Moan Guide Power Supply Guide

Upgradation problem pls help

I imported my oracle 8.1.5 database dump in oracle 8.1.7 but when I want to connect to my instance thru a client machine one error message comes as "
problem in connecting to the database, check whether it is started or contact sys admin" whereas the database is in open state.
Then when I connected to sqlplus at the server, it gets connected but some messages also come as below"
ORA-06553: PLS-213: package STANDARD not accessible
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-06553: PLS-213: package STANDARD not accessible
Could anyone pls help..

What is the result of
SQL> show parameter PLSQL_V2_COMPATIBILITY
?

Installation problem, pls help

I am trying to install Oracle 10g on SUSE 10.0.0 but when i run the ./runInstaller command, I receive an[b] error of writting to directory /tmp/OraInstall2006-03........, Please ensure this directory is writable and at least 60MB of disk space, i have checked for space using df -h /tmp, there is enough space, i think the problem has got to do with permission because @ the moment it belongs to root user, i don't know what to do, i am a novice to unix and need to install oracle today. Pls help
Usually the standard install of SuSE Linux should set the ownership and access rights to /tmp, if you want to give access to everyone on the system, just use this command (if owner/root access is available):
I have used chmod o+rwx /tmp command and still having the same error. Pls somebody help
chmod o+rwx /tmp

Of course I assume you did correctly follow installation and configuration instructions. Did you read Oracle10g/Linux Errors and Problems from Werner Puschitz ?

Audio+Video Chat works but one small problem.Pls help.

HI..
as i had posted once before in a different query's thread, i have implemented audio and video chat using AVTRansmit2 and avreceive2.
audio and video chat work well.By video chat i mean not only video but VIDEO+AUDIO as well.. just like usual yahoo video chat.
But the problem is like this:-=
I have given an option for user to switch from audio chat to video chat.
now if a user first goes to audio chat and then switched to video chat,
then the problem comes. When he's shifted to video chat i close down previous Audio chat by RTPManager.dispose() , i close the player and everything..
and then i start Video transmit/receive "ALONG WITH" audio transmit/receive..
No this time video starts but audio doesnt work ..
it says"waiting for rtp data to arrive.... "
The problem is that when this new stream of audio data comes, the receiver somehow thinks that its the same old stream since its from same transmitter IP.. and so it tries to UPDATE the previous stream.
It means there is some problem with the close method or RTPManager.dispose() which should have disposed off all the stuff much before the new connection was made.
PLS HELP ASAP>
this is crunch time for my project.

Hi anandreyvk . .
well, i had tried doing removetargets and also, i had disposed RTPManager well. As it turns out the problem was not with any of it but it was the problem of me incorrectly passing RTPManager from AVReceive2 to AVTransmit2.
Actually i am using just one RTPManager.. since i am receiving and transmitting on the same port.
i've solved the problem but i am not sure if this is the right way .. what do you think ??
is creating just one RTPManager {by that,i mean initializing it only once} a good idea ?? Since we are supposed to call both AVTransmit2 and AVReceive2 with the "LOCAL PORT" .. {which in itself is a matter of discussion though! } i and my project mate thought initializing RTPManager only once is a better option .
Whats your take on all of this ?

FCE Beginner having SERIOUS problems. HELP

I am a FCE begginner and I am having a serious problem and is in need of serious help.
I am trying to capture video clips into FCE from my Panasonic video camera which is only a Standard Definition video camera using a mini DV tape.
When I connect to the FW400, it looks okay when I opened up FCE. So, I clicked FILE > CAPTURE.
I can see my video is being played in the capture window. I then click the Mark-In button. About 15 seconds later, I clicked the Mark-Out button. Then I clicked the Capture Clip button.
About 10 seconds after clicking the Capture Clip button, a message appear saying that "Dropped frames were detected during the last capture". I clicked OK and an icon appeared on the browser window.
My problem is this:
1) What can I do to prevent the dropped frames ?
2) Why is the icon appear as a red colour background with a red diagonal line ?
3) Why is it when I drag this icon into the timeline & try to play the captured video, I can only see the word UNRENDERED in blue colour appearing on the canvas ?
4) I also try to view what I have captured by putting the icon into the viewer window. And what I saw was the word MEDIA OFFLINE. Why can't I viewed what I have captured ?
Other questions:
5) After finish capturing, what is the best way to end the capturing ? When to pull of the FW400 cable ? How & when to close the capturing window ?
6) When the video was playing in the capture window, how do I fast-forward and see the video moving faster at the same time ? (I only know there is a fast-forward button but when I clicked it, the STOP button is automatically activated and I cannot see the video moving)
Thank you very much. Any help is appreciated.

Tom Wolsky wrote:
2. That's because the clip isn't really captured. It's offline.
3 - 4. Because the clip hasn't been captured.
5. When you finish capturing close the capture window. If you want you can pull the camera out or leave it connected.
6. Use the J-K-L keys. J backward, K pause, L forward. Press L a bunch of times and you go fast forward. Remember cameras are not very responsive devices. They're not like decks designed for shuttling tape.
1. What's the cameras exactly? What's the drive? How's everything connected? What settings are on the media? What settings are you using in FCE?
Thanks Tom for your answer but I apologise I don't quite understand some of the thing because I am really green in FCE. I use iMovie 09 previously.
2-3-4 What does offline means ? I mean why is the clip hasn't been captured ? I tried to follow capture clip as indicated in your book pg 59 to 66. But I think what I obtained were something like Fig 4.13 & 4.14 of page 67 in your book.
Maybe I relate what I did. I am able to see my video playing on the capture video without any problem. So, when I reach a certain part of the video I click the Mark-In button and the Time indicator on the Left hand side change from NOT SET to a certain number. After about 10 to 15 seconds I clicked the Mark Out button and the Time indicator on the Right hand side change from NOT SET to a certain number.
Then I click the video to stop. Then I clicked the Capture Clip button. After that a black screen appear with a small apple logo at the centre with the bottom saying "Cueing for Source Material" just like fig 4.11 in page 66 of your book. Then I have the same black screen but this time it says "NOW CAPTURING" just like Fig 4.12 in page 66 of your book.
After that, a message appear saying "Dropped frames were detected during the last capture". I just clicked OK and an icon appeared on the browser window. So, how come the clip hasn't been captured ? The fact that ican warn me of some dropped frames means that something must have been captured, right ? Or is it that ALL frames have been dropped ?
So, where did I go wrong ?
5) Ok thanks, I got that
6) Ok thanks, the J-K-L keys on the keyboard really works !! Yay !!
1) The model of my video camera is Panasonic NV-GS230. It is only a Standard Definition video camera using mini DV tape.
I am using a Lacie FW800 external Hardrive to store the media files.
I connect the Panasonic video camera to the iMac FW400 slot. So far, I have no problem capturing with this video camera in iMovie 09 and iMovie HD 06 using the same slot.
How do I check the settings on the media ? If you are referring to EASY SETUP, my settings are:
FORMAT: (all format)
RATE: (all rates)
USE: DV NTSC
Except for System Settings where I set the scratch disk to my external Lacie and changing the Level of Undo in User preference to 32 (just like you suggested in page 43 of your book), the rest my settings on the FCE are all default settings because I did not change anything except the 2 mentioned. Is there any setting in particular that you want to check ?
Thanks & sorry for being a real slow beginner. Really appreciate your help.
Thanks

Help me out to resolve a conditional problem----pls help

Hi Experts ,
I have the requirement in which if the apinumber is greater than or equal to 10 then only the rows should get inserted into the well_header_table from products_mv table.I need to use only merge concept and nothing else.
I am making use of the merge concept here .I am checking for the 10 digit condition during the updation part but same will be inserted into the well header table.This shouldnt happen .Can any one suggest me how can i filter out the insertion part so that it only inserts the rows which has api_number greater than 10 digits.I have marked my 10 digit condition that checks for the update part in bold form.
Pls help me out in resolving this issue .
regards
debashis
[\n]
CREATE or REPLACE PROCEDURE NAG.MERGE AS
BEGIN
merge into NAG.Well_Header_Table
using nag.products_mv
on (SUBSTR(nag.products_mv.API_NUM,0,10) = SUBSTR(NAG.Well_Header_Table.API_NUMBER,0,10) )
WHEN MATCHED THEN UPDATE SET
NAG.Well_Header_Table.WELL_NAME = nags.products_mv.WELL_NAME where nag.products_mv.API_NUM >= 999999999
WHEN NOT MATCHED THEN INSERT (NAG.Well_Header_Table.API_NUMBER,NAG.Well_Header_Table.WELL_NAME,NAG.Well_Header_Table.SECTION,NAG.Well_Header_Table.TOWNSHIP,NAG.Well_Header_Table.RANGE,NAG.Well_Header_Table.WELL_METER_NUMBER,NAG.Well_Header_Table.COUNTY_NAME,NAG.Well_Header_Table.OPERATOR_NAME,NAG.Well_Header_Table.PRODUCTION_FORMATION,NAG.Well_Header_Table.STATE_NAME,NAG.Well_Header_Table.FIELD_NAME,NAG.Well_Header_Table.WELL_FLAC_NUMBER,NAG.Well_Header_Table.WELL_LEASE_FLAC,NAG.Well_Header_Table.WELL_TYPE,NAG.Well_Header_Table.WELLBORE_PROFILE,NAG.Well_Header_Table.STATUS)
values (nag.products_mv.API_NUM,upper(nag.products_mv.WELL_NAME),nag.products_mv.SECTION,nag.products_mv.TOWNSHIP,nag.products_mv.RANGE,nag.products_mv.METER_NUMBER,upper(nag.products_mv.COUNTY_NAME),upper(nag.products_mv.OPERATOR),upper(nag.products_mv.PROD_ZONE),upper(nag.products_mv.STATE_NAME),upper(nag.products_mv.FIELD),nag.products_mv.WELL_FLAC_HZ,nag.products_mv.LEASE_FLAC,upper(nag.products_mv.WELL_TYPE),upper(nag.products_mv.WELLBORE_PROFILE),null);
END;
[n]
regards
Debashis

Try those selects below and look at your on condition
select substr('123456789',1,10) from dual
select 123456789 from dual where 123456789 > 999999999
-- perhaps
on (nag.products_mv.API_NUM = NAG.Well_Header_Table.API_NUMBER and nag.products_mv.API_NUM > 999999999)Regards
Etbin

Im my lap has hard disk problem,how to resolve the problem,pls help me...

Hello,
           I have hp pavilion dv4 lap,in this lap has some hard disk problem,when i am turn on the lap that screen shows this message "The smart hard disk check has detected an imminent failure.To ensure not data loss,please backup the content immediately and run the hard disk test in system diagnostics".
           After that i was diagnostics the system but no changes in the lap,,again again lap shows hard disk error(301).
           Then i am chosen the enter option to start up the lap it take long time for openning the windows,after enter the windows that also shows about the hard disk error in within few minitues,
           What can i do?
           This lap bought at 12-oct-2012 from malasiya,now im in tamil nadu,how to solve the problem please help me.

Hello srhk. Thank you for posting on the HP Forums.
I understand the hard disk is experiencing issues. Error 301 indicates the hard disk possesses a hardware defect. I would contact HP Phone Support for assistance, or purchase an equivalent hard disk.
If you choose to contact HP, their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

SQL server weird connection problem-Pls help

I m using SQL server 2005 express. My default logon mode setting is set to-SQL server authentication and I can logon to using SQL server management studio express always. I enabled TCP/IP from SQL server configuration manager. The sqljdbc.jar (JDBC driver) is set correctly in classpath and 1433 port is allowed in windows firewall. YET, I can�t connect to sql server using the following code-
import java.sql.*; public class testconn { Statement stmt; Connection con = null; String driver = "jdbc:sqlserver://"; String server = "localhost:1433;"; String db = "database=IDLC-Customer;"; String user = "userName=Tanvir;"; String pwd = "password=abcd;"; String connectName = driver + server + db + user + pwd; testconn() { try { Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver"); con= DriverManager.getConnection(connectName); stmt=con.createStatement(); if(!con.isClosed()) System.out.println("Successfully connected to " + "SQL server using TCP/IP..."); } catch(Exception e) { System.err.println("Exception: " + e); } finally { try { if(con != null) con.close(); } catch(SQLException e) {} } } public static void main(String args[]) { testconn tc=new testconn(); } }
My host name is- Tanvir. So, in management studio express the server name is shown- TANVIR\SQLEXPRESS
When I run the code it says-The TCP/IP connection to the host has failed.
Java.net.connectException:Connection Refused: Connect
One more thing, though 1433 port is allowed in windows firewall, I can�t connect to that port using telnet (e.g. telnet <server_host> 1433).I even disabled firewall and tried but in vain. PLEASE help me brother.

masijade. wrote:
Then you, seemingly, have not configured your SQL server properly, or you have not "activated" that configuration.
(don't ask because I don't know how, or even if, you do it that way with SQL Server).
But, not being able to connect with telnet, means that nothing is listening on that port. What does the netstat command tell you?Brother,as u know that sql server use the default port 1433 even if i don't mention it.And I tried disabling my firewall and antivirus but yet I cant connect.I searched the ports using "Advanced port scanner" but the port 1433 is neither in its open ports list nor in closed port list. WHat can I do now.The port 1433 is by default used by sql server.So even if I dont mention it or set it, it should work.Isn't it? I m getting out of my mind, pls help .

Serious problem. pls help !!!!!!!!!

Similar Messages

Maybe you are looking for