Serious problem with a color correction

Ok so here´s the deal....
I have a 83.62 Gb quicktime movie file. It came from a Black and White color corretion made in Scratch and it was delivered to me wit a Uncompressed 32-bit ARGB codec.
I need to work with it on FCP, so i compressed it to Apple Pro Res 422(HQ) and then imported it to final.
While in final cut, a played the commpressed clip on the viewer and .....(HERE´S THE TRICKY PART).....it losses the color correction on the playback, but as soon as i pause it, it recovers the color correction again.
I´ve asked a few friends about it and nobody seems to understand what´s going on. The clip recognizes the color correction ONLY WHILE PAUSED. Not on playback, not even if I play it the Quicktime application. I´m completly lost.
I have a Mac Pro 2x2.4 Ghz Intel Xeon , with a 6 GB 1066 MHz DDR3 ECC memory and a ATI Radeon HD 5770 1024 MB graphics card. With FCP7 running.
I will greatly aprecciate your advice on this one!

Besides the fact that FCP plays videos at low quality for resources sake, I would suggest you export a two second clip (with current settings) and check about colour correction in quick time. If there is a problem convert original again in compressor but this time in the colour tab select the HD 709 colour space. The 709 space manains grading across conversions.
I underlined the 422 and not the 422 HQ but you get the gist...
Message was edited by: hyphen

Similar Messages

Serious problem with my iPod Classic/iTunes

I have a 6th Generation iPod classic (80 GB), and recently, I have been having some serious problems with it.
When I connect it to iTunes, there is usually no problem, it shows up, plays and displays the music correctly, etc. However, if I try to ADD any music to it, iTunes will freeze, then close, and within 5 minutes, my entire computer will freeze completely, and be shut off. For whatever reason, happen when my iPod finally disconnects because my computer turned off, all of my music is missing from the library (This doesn't happen every time it freezes, because I try to disconnect my iPod manually before everything freezes). The music is still on the iPod, (it says that I have XX.X GB of "other" instead of music/videos), but it doesn't show up. When I plug in my iPod, iTunes says that there was a problem and I need to restore it. The first time this happened, I lost over 5,800 songs, but I forgave Apple, because these things do occasionally happen, plus I had no idea what exactly went on. The SECOND time happened within the same week, after I had put 800 songs back on the restored iPod. The first time happened when I was using iTunes 10 (which is seriously buggy on my computer, and freezes often), so I switched to iTunes 9 (still buggy, but doesn't freeze quite as much), and the same thing happened. So now I'm thinking it's my iPod's fault. My iPod does a whole host of minor problems over time such as making certain songs cut off at a certain specific point for no reason (Always the same song, always the same cut off point, and I can't fast forward past it, I also can't delete the songs because if I highlight them on iTunes, iTunes will freeze, and if I find them under the music folder in iPod control, my computer will freeze), freezing the entire iPod for seemingly no reason, and somehow messing up my album artwork (it will appear as "Colourful Static"), along with alot more.
I know this is a troublesome problem, but if anyone could somehow shine some light on this problem, it would be tremendously appreciated.
Thank you
-Eric Luna

Unfortunately, when a hard drive starts clicking that means it's going bad. The mechanism is having trouble reading the drive. Since the iPod is mostly just a harddrive and a battery I have a feeling that this is your problem.
watch this video. http://www.youtube.com/watch?v=wMm6c3fr-fU
about 25ss in is where the clicking starts. If it sounds like that, but softer and more muffled since it is a smaller drive that is being enclosed then I think you might be SOL. Maybe if you're iPod is still under warranty you can get a credit and go for a touch and avoid moving parts all together?

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in.

I've installed Adobe Presenter V7.0.7 Build 7746. When I open an existing PowerPoint file and try and use Presenter, I get the following error: PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?
No, I don't want to disable it. When I click No, PowerPoint stops working. I get a message that says: Microsoft PowerPoint has stopped working. A problem caused the program to stop working correctly, Widows will close the program and notify you if a solution is available. My only choice is to click the Close program button.
When I open the PPT file again, I get the same "experienced a serious problem" message. If anyone has a solution to this, I'd appreciate knowing what it is. It took me a while just to get the Presenter option to appear in the PowerPoint toolbar. Now that I have it, it's not working.
Thank you!

Thank you for your quick reply. Here are the answers to your questions.
1. The file I'm having issues with was not created using any version of Presenter. It is simply a PowerPoint file.
2. The file is a PPT not PPTX.
3. I am running Windows7 and Office 2010.
I think I might have found the solution to the problem. I opened the PPT file and saved it as a PPTX file. Then I clicked the Presenter option in the PowerPoint toolbar and was able to select different Presenter options with no issues. I opened other PPTX files and I did not get the error window stating 'PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in'.
This seems to work. So, it appears that any PPT file needs to be saved as a PPTX file before using Presenter. If you have another solution that I might be able to keep in my back pocket (in case this happens again and what I did does not work), then please answer. Otherwise, I'm good now.
Thanks!

Serious problem with encrypting options of Symbian...

Hello to all
Yesterday I've got a serious problem with the encrypting options of my Nokia C7 with Symbian Belle.
After encrypting all memories (300MB C: internal memory, 8GB D: mass memory and 8GB microSDHC memory card) I saw that even for the user all files were unreadable (even the name of the file).
It's not like the old password system for memory card present until Symbian Anna (that made the memory card inaccessible only for other phones and pc).
So I decrypt them, wanting to turn back the situation. The 300MB C: internal memory was correctly decrypted, same as the 8GB E: microSDHC external memory card.
But the internal 8GB D: mass memory was decrypted and wiped out. Or, for better explanation, it was formatted.
FORTUNATELY I'm obsessed with data security so the internal mass memory contains only the maps and some video copied inside the memory (I don't remember well but I think that was all).
But I think that is a serious problem. I sincerely don't want to retry again for checking if this was only a case or a recurrent bug...

Hi baboo85,
Welcome to the Nokia forum.
Thank you for your feedback and good to hear haven't lost any crucial data.
All posts on this forum are read by us as moderators as well as our software developers and will be looked at when software updates are being created.
Please continue to post valuable feedback!
Regards,
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Serious problems with WYSIWYG

Hi,
I have some serious problems with placements in 3.0. Items sits just fine i design mode, but in quick preview or in browser preview, items goes all over the place.
The only way to go around the problem is to shift the item in design mode and make successive previews to see, if the item now sits correct. And even this metode is not optimal, because sometimes this action moves other objects on the page in preview as well....
This ofcourse means, that I do not have any WYSIVYG at all. And the worst is, that I never know which of the items on a page will course the next problem. Very, very frustrating!
My last updated version (must have been 2.3...) was faultless. I made a customer site in this version before upgrading.
This page has now been approved, but opening the site in version 3.0 is futile. In designmode everything looks fine, but in preview it looks like something I tried to code myself.... I don't know what I will tell my customer, but it's not good. Not good at all.
I have attached two screendumps. The first one shows the page in design mode. Everything looks fine and every item sits correct. On the second screendump you see the slideshow is going up and behind the topbar, which is center pinned. Notice that there is no scrollbar, so I can't scroll down. This problem is just one of the above mentioned. Other problems are text or pictures that refuses to align horizontally, pictures that goes way out to the top - or the bottom....
I tried to check the sticky footer on and off, but no result either. I have even rebuilt the version 2 site, pasting the items anew, but still it goes wrong in the browser.
Am I the only one experiencing this problem? If you want to see the muse file, you are welcome.
Regards a very unhappy customer

Hi Sachin, no, But I do have a center pinned topbar. I have tried to un-pin the topbar, but the problem with misplaced items still appears. Its important to emphasize that in designmode everything looks fine, but in preview or a browser files are misplaced or hidden behind each other.
I tried to check the sticky footer on and off, take away footers on the masterpage etc. because it seems that something on the page is pushing or attracting some of the placed items.
The problem basically is, that Muse 3.0 does not give me WYSIWYG, and that is a dissaster for a designer!
Regards
John
Sendt fra min iPad
Den 19/12/2012 kl. 07.23 skrev "Sachin Hasija" <[email protected]>:
Re: Serious problems with WYSIWYG
created by Sachin Hasija in Adobe Muse Bugs - View the full discussion
Hello,
Please confirm if you have the items Right pinned? There is a known issue with Right pinning of items and restarized items in footer and our team is working on it to get them fixed as soon as possible.
We should have a Muse update available very soon which fixes these issues and a few others.
Apologies for the inconvenience.
Regards,
Sachin
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4932472#4932472
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4932472#4932472
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4932472#4932472. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Serious problem with TitledBorder(jPanel)

I have a serious problem with TitledBorder(jPanel)
Here, I have two class the first it contains a jTabbedPane ( class_jTabbedPane)qui call the second which contains a jPanel (Ptableau) which contains a jTable in a jPanel with TitledBorder
The problem that one I carry out the jPanel with the title does not post
Thank you! of your assistance.
The source of the example is as follows:
package jtabbedpane_titledborder;
import java.awt.*;
import javax.swing.*;
public class class_jTabbedPane extends JFrame {
PTableau PT = new PTableau();
private JPanel jPanel1 = new JPanel();
private JPanel jPanel2 = new JPanel();
private JLabel jLabel3 = new JLabel();
private JLabel jLabel2 = new JLabel();
private JTabbedPane jTabbedPane1 = new JTabbedPane();
public class_jTabbedPane() {
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
this.setSize(new Dimension(540, 515));
jPanel1.setBackground(Color.lightGray);
jPanel1.setBorder(BorderFactory.createEtchedBorder());
jPanel1.setLayout(null);
jPanel2.setBackground(new Color(27, 85, 135));
jPanel2.setBorder(BorderFactory.createEtchedBorder());
jPanel2.setBounds(new Rectangle(8, 7, 515, 47));
jPanel2.setLayout(null);
jLabel3.setFont(new java.awt.Font("Serif", 1, 25));
jLabel3.setText("Consultation circuits");
jLabel3.setBounds(new Rectangle(12, 12, 280, 27));
jLabel2.setFont(new java.awt.Font("Serif", 1, 25));
jLabel2.setForeground(SystemColor.activeCaptionBorder);
jLabel2.setText("Consultation circuits");
jLabel2.setBounds(new Rectangle(15, 5, 260, 32));
jTabbedPane1.setBounds(new Rectangle(8, 62, 515, 450));
PT.setLayout(null);
this.getContentPane().add(jPanel1, BorderLayout.CENTER);
jPanel1.add(jPanel2, null);
jPanel2.add(jLabel2, null);
jPanel2.add(jLabel3, null);
jPanel1.add(jTabbedPane1, null);
jTabbedPane1.add(PT,"Tableau");
//jTabbedPane1.add(PA,"Arborescence");
public static void main(String[] args) {
class_jTabbedPane Ct = new class_jTabbedPane();
Ct.setVisible(true);
package jtabbedpane_titledborder;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.border.TitledBorder.*;
public class PTableau extends JPanel {
private JPanel jPanel9 = new JPanel();
private JPanel jPanel5 = new JPanel();
TitledBorder titledBorder5;
TitledBorder titledBorder4;
private JPanel jPanel4 = new JPanel();
private JScrollPane jScrollPane2 = new JScrollPane();
private JTable jTable1 = new JTable(4, 4 );
private BorderLayout borderLayout1 = new BorderLayout();
public PTableau() {
try {
jbInit();
catch(Exception ex) {
ex.printStackTrace();
void jbInit() throws Exception {
jPanel9.setBackground(new Color(27, 85, 135));
jPanel9.setBorder(BorderFactory.createEtchedBorder());
jPanel9.setBounds(new Rectangle(1, 1, 540, 350));
jPanel9.setLayout(null);
this.setLayout(null);
jPanel5.setBackground(new Color(27, 85, 135));
jPanel5.setForeground(Color.white);
jPanel5.setBorder(BorderFactory.createEtchedBorder());
jPanel5.setBounds(new Rectangle(12, 88, 501, 183));
jPanel5.setLayout(borderLayout1);
jPanel5.setBorder(titledBorder5);
titledBorder5 = new TitledBorder(" Liste des circuits ");
titledBorder5.setTitleColor(Color.white);
jPanel4.setBackground(new Color(27, 85, 135));
jPanel4.setBorder(BorderFactory.createEtchedBorder());
jPanel4.setBounds(new Rectangle(211, 3, 291, 44));
jPanel4.setLayout(null);
jPanel4.setBorder(titledBorder4);
titledBorder4 = new TitledBorder(" Liste des circuits ");
jScrollPane2.getViewport().setBackground(Color.white);
this.add(jPanel9, null);
jPanel9.add(jPanel4, null);
jPanel9.add(jPanel5, null);
jPanel5.add(jScrollPane2, BorderLayout.CENTER);
jScrollPane2.getViewport().add(jTable1, null);

Create your border first, then set the panels border. Do this:
[code]    titledBorder5 = new TitledBorder(" Liste des circuits ");
    titledBorder5.setTitleColor(Color.white);
    jPanel5.setBorder(titledBorder5);
    jPanel4.setBackground(new Color(27, 85, 135));
//    jPanel4.setBorder(BorderFactory.createEtchedBorder()); // redundant
    titledBorder4 = new TitledBorder(" Liste des circuits ");
    jPanel4.setBorder(titledBorder4);[/code]
Not this
[code]    jPanel5.setBorder(titledBorder5);
    titledBorder5 = new TitledBorder(" Liste des circuits ");
    titledBorder5.setTitleColor(Color.white);
    jPanel4.setBackground(new Color(27, 85, 135));
    jPanel4.setBorder(titledBorder4);
    titledBorder4 = new TitledBorder(" Liste des circuits ");[/code]
You should also use code tags as I have demonstrated above. It makes you code easier to read for the people you are asking to help you. You can read about them under Formatting Help on the page you post on.

Apple Have Serious Problems With 10.7.5

Apple have very serious problems with their software and they do not have the courage to openly admit this to their customers. My company has been dedicated to Apple and all that is good. We have 2 Imacs, I macbook Pro, 1 mac Mini, 1 mac mini server, 1 ipad, 4 iphones and peripheries. I am on the verge of placing them all on a heap and putting a sledgehammer to them all because I am certain that 10.7.5 is such a corrupted release that even Apple technicians cannot help. My company has been on more and more get around fixes that are becoming more and more complicated by the minute. For the last 4 weeks I have been working 8 to 8 daily including some of the weekends to try and fix things. I have had the pleasure (genuinely) of working for two days following a knowledgeable Apple Technicians instructions to resolve a cloud issue and as of today I sit with one imac completely unusable with all sorts of errors and malfunctions - all software based. Other symptoms on other hardware include error messages saying the computer restarted due to a problem with the computer - even though we are carrying out clean shutdowns or restarts; inconsistent acceptance of passwords to i cloud on most equipment but in particular as highlighted above; nearly all applications opening on restart (I do know how to shut that off - in theory!!!!!!!); frequent and very lengthy beachballs; keychain is an absolute mess, slowdowns to the extent that I have to work on three machines to get the minimum of work done; and other random malfunctions or error messages. Apple's positive attitude to its customers used to be second to none. It seems to me that software (and hardware) releases are now too rushed and Apple do not care about software failures but rely on customers to troubleshoot the glitches for them and do so under warranty or more likely care plan support at further cost to the customer.
Just look at all the questions being asked by customers via web searches on the above issues and more. Lots of questions, no reliable fixes, and certainly no interest shown by apple to resolve the issues - in fact Apple have adopted the say and do nothing approach.
I love the products and have been a loyal ambassador to Apple but now my stress level, and the inability of my company to engage its business put me on the verge of taking every item my company owns with an Apple logo and at least gaining some satisfaction by placing them all in a heap and smashing the lots with a sledgehammer (deliberate repeat as this is now a realistic option)
It used to be a pleasure to use the products, and efficient. I am not looking for help on these matters as an Apple technician is working very hard with us but I feel he is as frustrated as us. We are nowhere nearer resolving our problems and almost daily there are other glitches emerging.
Apple are losing their way. They must listen to the directions given them by their customers frustrations.

What happens when you click the button?

Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
Feroze

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Gtx860m 2gb serious Problem with gtaV fifa15 MGS ground zero

Hi people,
i have a serious problem with my vga (gtx86m)
when i wanna play with gtav,fifa 15 or mgs ground zero and i start msi after burner i notice that my vga usage is 0%.why?
i have the last nvidia drivers installed on my notebook(350.12)
anyone have the same problem?
do u have some solution?
i have a msi ge60 apache pro
i7mobile
gtx860m 2GB
8gb ram
ssd samsung 120GB
thanks anyway
[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Reminder:
Forum Rules: Don’t… - Bump posts. (Bumps will be deleted without further notice)
There are many people having the same problem (according to the ROCKSTAR forum), so I think the problem is from the GTA V and the NV Graphics Driver.
There are users sharing the temporary fix:
Quote:"There is a temporary fix for the Nvidia cards where you disable the Nvidia cards in the device manager and reenable after launching game."
Source: https://support.rockstargames.com/hc/communities/public/questions/203308668-GTA-V-on-Laptop-Issues-Intel-AMD
Give it a try.
I'm sure that the long term solution should be a game patch or the new NV driver. It's better that you report the issue to the ROCKSTAR GAMES.

Urgent! Serious problem with J2EE Classloader!

Hi all,
I'm having a serious problem with j2ee Classloading.
I have "inherited" a J2EE application where all business classes (invoked by the EJB) are placed in the Application's Server classpath (Weblogic 8.1.4).
Very bad because every time a class is changed the a.s. must be restarted.
So I re-enginereed the package putting the business classes in a jar that is referenced by the EJB's MANIFEST file.
This way all the classes would be loaded by the EJB classloader and no need to start/stop weblogic.
Unfortunately it's not such !! I discovered that all business classes are loaded via REFLECTION
Object objCommand = objClass.newInstance();
Object[] param = new Object[1];
param[0] = aDataContainer;
objDataContainerReturn = (DataContainer) objMethod.invoke(objCommand,param);
and the application server cannot find them using the standard J2EE Classloader mechanism.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at irma.business.Dispatcher.callService(Dispatcher.java:70)
Caused by: java.lang.NoClassDefFoundError: irma/utility/log/LogPrintStream
at irma.business.service.LoginService.login(LoginService.java:79)
On the other hand they're found if I put the classes on the application server classpath.
Has anybody got advice for this ? Should I refactor the application giving up reflection ?
Thanks a lot in advance.

Reflection uses the classloader as well so it should work fine.
A common cause of a NoClassDefFoundError is something in a parent classloader that refers to something only available in a child loader.
For instance, do you have any of your application classes which are in the $CLASSPATH but reference something that is only (now) in the business.jar in your ear?
-- Rob
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

If you have a problem with Adobe products, voice your issues with them.
It is the software developers responsibility to maintain compatability
with any operating system, beit OSX or Windows.

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Serious problem with a color correction

Similar Messages

Maybe you are looking for