Serious problem with X1 carbon after windows 8 upgrade

Hello,
I've just purchased my new X1 carbon this week, came with 3 discs to upgrade it from Windows 7 to 8. Now I've followed the steps and everything worked fine. But, my laptop lags A LOT. For example, while I am using on it, the "writing/reading to SSD" lamp lights up and my laptop hangs up for seconds then it's back. It keeps doing this multiple and multiple of times!!!
Any help please!

Victorymarketin, welcome to the forum.
Since they are both Microsoft programs, I suggest contacting MS Customer Service for help.  They have always gotten me up and running in short order.  This is always my solution when I have MS related problems.  They if anyone can, will solve your problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • [SOLVED]Problem with logging in after system upgrade

    Hi,
    I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
    What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
    What I have is arch on pendrive so I can chroot into existing system.
    Any ideas?
    Last edited by jakub (2014-10-08 22:09:02)

    I found something similar to line
    (EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
    these values are not exact as I'm too tired now to rewrite the real ones from screen 
    maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
    Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
    I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
    Last edited by jakub (2014-10-08 22:03:11)

  • Problems with loading mailbox after GW8 upgrade

    I just recently upgraded to Groupwise 8 in a school district. I support many school districts and this is the first time I've had this problem. Users are complaining that from outside the network(home access) that when they log in to web acc, the mailbox will just hang at "Loading...."
    The toolbars, menus, and folder list all display properly, but it hangs trying to load the message list for the mailbox. It works fine when on the internal LAN, only happens from home. And the problem is not constant - sometimes it will work, sometimes it will not. I've had users complain about the issue from the entire spectrum of web browsers, from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp internet files and still have the problem.
    I do see a java error on the logger screen, I'm not sure if its related:
    com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
    The only reference I could find to the above error on these forums(or anywhere for that matter) was in the following thread:
    http://forums.novell.com/novell-prod...unloading.html
    Which doesn't describe the problem I am having....
    Has anyone else seen this problem or have an idea what to check?
    Thanks in advance for any help
    -Rich

    John Cunningham wrote:
    > I'm getting exactly the same error after my upgrade from 7.0.3 to 8.0.1.
    > WebAccess 'kinda' works: you can log into it but there are java (Tomcat,
    > I presume) errors on the console:
    >
    > Novell GroupWise WebAccess
    > Version 8.0.1
    > (C) Copyright 1993-2009 Novell, Inc. All rights reserved.
    >
    >
    > <GroupWise WebAccess> WebAccess Servlet is ready for work
    > Sep 4, 2009 6:45:49 PM org.apache.jk.common.ChannelSocket init
    > INFO: JK: ajp13 listening on /0.0.0.0:9010
    > Sep 4, 2009 6:45:49 PM org.apache.jk.server.JkMain start
    > INFO: Jk running ID=0 time=0/85 config=null
    > com.novell.webaccess.providers.gwap.GWAPException at
    > com.novell.webaccess.providers.gwap.XGWAP.xlatAvai lableDictionaries(U
    > nknown Source)
    > at com.novell.webaccess.providers.gwap.XGWAP.xlatMess age(Unknown
    > Source)
    >
    > at com.novell.webaccess.providers.gwap.XGWAP.itemRead (Unknown
    > Source)
    > at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    > at
    > sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.
    > java:39)
    > at
    > sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAcces
    > sorImpl.java:25)
    > at java.lang.reflect.Method.invoke(Method.java:324)
    > at
    > com.novell.webaccess.providers.gwap.XGWAP.dispatch ServiceHandler(Unkn
    > own Source)
    >
    >
    > . . . you get the picture.
    >
    > I've re-installed the WebAccess Application from scratch, no diff.
    >
    > Users can log into it, but when they open a message they get a dialog
    > box "Unable to process request. Please contact your system
    > administrator." Then it displays the email message but it does not mark
    > the messages as read in the main browser window.
    >
    > Besides that, Tomcat has crashed on me and hung completely, requiring me
    > to reboot the server.
    >
    > I've spent a lot of hours trying to get this resolved.
    >
    > The WebAccess agent is on another (clustered) node. The WebAccess
    > Application is installed on a single NW65SP7 server (i.e. not clustered).
    >
    > Any suggestions would be greatly appreciated.
    >
    >
    > rpf2 wrote:
    >> I just recently upgraded to Groupwise 8 in a school district. I support
    >> many school districts and this is the first time I've had this
    >> problem. Users are complaining that from outside the network(home
    >> access) that
    >> when they log in to web acc, the mailbox will just hang at
    >> "Loading...."
    >>
    >> The toolbars, menus, and folder list all display properly, but it hangs
    >> trying to load the message list for the mailbox. It works fine when on
    >> the internal LAN, only happens from home. And the problem is not
    >> constant - sometimes it will work, sometimes it will not. I've had
    >> users complain about the issue from the entire spectrum of web browsers,
    >> from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp
    >> internet files and still have the problem.
    >> I do see a java error on the logger screen, I'm not sure if its
    >> related:
    >> com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
    >>
    >> The only reference I could find to the above error on these forums(or
    >> anywhere for that matter) was in the following thread:
    >> http://forums.novell.com/novell-prod...unloading.html
    >>
    >> Which doesn't describe the problem I am having....
    >>
    >> Has anyone else seen this problem or have an idea what to check?
    >>
    >> Thanks in advance for any help
    >>
    >> -Rich
    >>
    >>
    fuplivsyr

  • Problems with TV - Card after Kernel Upgrade

    Hi Folks,
    since the last Kernel Upgrade I've got problems with my tv tuner card. Since ever I had to set the tuner manually to 38. But now it seems that its not enough just to set this type.
    I used this script to set up my card correctly:
    modprobe -r cx88-dvb cx88-blackbird cx8802 cx88-alsa cx8800 cx88xx
    modprobe cx88xx tuner=38
    modprobe cx8800
    Now I've got weired sound and only a few stations, with a very poor picture quality. After reloading the modules with the script dmesg says:
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type 38, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    From my (limited) point of view the problem is, that tuner-simple does not loads the correct tuner type? I've looked into modinfo from tuner-simple but there is no parameter for type... What else could be the problem?
    Thanks in advance
    Badcel

    Hi cjpembo,
    my Card looks like:
    01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
    01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
    My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
    A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
    If I don't specify any module parameters, the tuner type 0 is selected.
    ACPI: PCI interrupt for device 0000:01:07.0 disabled
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    Linux video capture interface: v2.00
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type -1, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
    Badcel
    Last edited by badcel (2008-08-24 09:46:18)

  • Problems with VMWare Fusion after MacOS Upgrade

    Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion.  After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
    Has any one else had this problem? Is there something I can do to fix this?

    Hi cjpembo,
    my Card looks like:
    01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
    01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
    My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
    A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
    If I don't specify any module parameters, the tuner type 0 is selected.
    ACPI: PCI interrupt for device 0000:01:07.0 disabled
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    Linux video capture interface: v2.00
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type -1, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
    Badcel
    Last edited by badcel (2008-08-24 09:46:18)

  • Problems with "No WiFi" after OS upgrade

    Ok....I have a 2G or 3G iPod Touch (not sure which but got it in January 2010) that I just finally upgrade to the the newest OS because I got tired of being told I couldn't download apps due to the OS.  Well, now it's really fixed because I can't download anything and the iPod is a useless as a brick.  I have the infamous "No WiFi" grayed out issue.  Please don't try to tell me it's a hardware issue because that's a bunch of crap. Anyone with half a brain knows that it's the OS if it worked before the upgrade and now doesn't work at all.  iPod worked just fine with absoultely NO WiFi issues before the upgrade and now it's useless after the upgrade.  Clearly this is a VERY common issue from the Google searches I have done and clearly in MANY cases there appears to be no real fix.  I'm a very technical-savy person and I've already spent at least 4 hours searching, backing up and restoring to no avail.  I've rebooted the iPod, rebooted my router, restored the iPod to a new iPod, retored the iPod to the back-up and bascially NONE of the ideas work.
    It is inconceivable to me that there is not a fix out there for this issue and that there isn't even a system restore to go back to the old operating system.  Even Microsoft let's you restore to a previous time.  That's pretty basic funtionality.  For as bad as Microsoft can be, they at least understand that it's a necessity at times.  Apple apparently doesn't even acknowledge that their operating system is broken.  They'd rather you run out and buy a new iPod.  Furthermore, I can't believe with the number of times I've seen the issue online, that there isn't a bigger outcry over it. 
    So, all you people out there that brag about how Apple products are more immune from all of those viruses, just realize you are being duped from Apple who is in essence creating its own virus by giving you an OS that renders your product virtually useless.
    Would welcome any additional fixes for this issue, but after owning at least 6 different iPods, I will make sure I never buy another Apple product again unless this thing gets fixed.

    No. That won't be necessary.  To me that is an unacceptable and ridiculous solution.  I'll just go buy an Android product and make sure I never waste another penny on Apple.
    Really?  Apple is that stupid that they can't create a fix that is downloadable?  I'd stay far away from their computers and tablets if that's the case. 

  • Problem with Reset/Refresh after Windows 8.1 upgrade

    When I try to do a Refresh or Reset on my Helix after it has been upgraded to 8.1, I receive a message to "Insert Media.  Some of the files are missing."  Does anyone know how to fix this?  

    I have same problem, there are some solutions on my thread you can check them out if you like.
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Unable-to-Reset-Refresh/td-p/1533410

  • Serious problem with xorg - keyboard and mouse locks all the time.

    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.

    Jacek Poplawski wrote:
    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.
    I had that a few days ago, couldn't reproduce it. I was also running xfce4. I havn't had it today and im running xfdesktop+xfce-mcs-manager+pekwm+xfce4-panel... so it may have been xfwm4.
    James

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Serious problem with bluetooth after upgrade to iOS6.1

    After upgrading to iOS 6.1 I have found serious problems with bluetooth, now I can not see the other iphone and vice versa.
    Someone has the same problem?
    Why Apple continues to restrict bluetooth functions?

    Hi,
    Thanks for your answer. Yes I've checked parameters modification and SPICBOOKING is "well" launched but it produces no results, so I guess there are some other changes in dimension customizing of AccountL or Datasrc....by the moment I'm testing but with no luck. This happens when you are about to go live and decide to upgrade your system.... 

  • Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

    I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
    Here is a quick note from the event viewer:
    The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. 
     Process ID: 1138 
     Start Time: 01d07dcede19c458 
     Termination Time: 15 
     Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE 
     Report Id: 
    Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
    this add-in and check to see if an update is available. Do you want to disable this add-in?.
    I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
    someone could help me get to the root cause of the matter.
    My environment is as follows:
    Windows 7 x64 SP1
    Office 2010 v 14.0.7128.5000
    Adobe Reader MUI X and Adobe Acrobat X
    Feroze

    Hi,
    As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
    I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
    Or contact the support of Adobe and see if there is a known compatibility issue or not.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with  Firefighter logs after upgrade to 5.3 from 5.2

    Hello Gurus ,
    just for 2 weeks we are running GRC 5.3 , which we updated from the 5.2 version .
    Unfortunately i could not make all the possible tests in one day and after i didnt check the FF reports .
    So after 10 days..after solving some issues from the upgrade i realized that in SPM (Superuser Priviliege Management ) we have a problem as well .
    We cant perform anymore reason / activity reports because the data are empty.By empty i mean all the entries users made dissapeard. I searched the two tables that normally should have the data (/virsa/zffcdhdr and the  STXH ) but with no luck .
    The other problem is..that after the upgrade to 5.3 from 5.2 the grcservice user that is responsible for the job  /VIRSA/ZVFATBAK didnt had enough authorization to complete the job , thing that before worked fine .
    So for 10 days the job didnt run and when i run the log report i see for every FFID the message "BACKGROUND JOB WAS NOT SCHEDULED/LOG & FILE NOT YET GENERATED"
    When i look directly in the tables CDHDR and CDPOS   i can see the data that the log  needs.
    But how can i reconstruct the FF log with this data ? Because when the auditor comes i would like to have the complete logs.
    thank you all for the support
    Cheerz ,
    david

    Hi David,
    Please go through the SAP Note [1143639|https://service.sap.com/sap/support/notes/1143639] (and subsequent Notes). I hope it is of help, at least partially.
    Best regatds,
    Feri
    Edited by: Ferenc Orosz on Apr 2, 2009 2:43 PM

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

Maybe you are looking for