Serious quality problem of N85

A big quality problem has come to light.
I find some picture of this.
The pressure lead to fracutre
I hope Nokia should recycle the flawed phones and redesign the phone.
Attachments:
snap070.jpg ‏173 KB
snap060.jpg ‏111 KB
snap069.jpg ‏184 KB

this is actually nothing new it has been discussed numerous times on various forums and blogs....it does happen, but most users do not report it as being an issue, i think you are presenting two issues one with the unglue of the naviwheel cover and the other a fracture...this is a forum for solving problems of a software nature, community users try to assist one another with pictures, messaging, camera, software issues and share some good solutions and ideas with one another...
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • 4 Questions on New Project Settings with Pemiere Elements 9 - & Fix Quality Problems.

    When I started my new project I selected PAL, DSLR - 1920 x 1080p  - 24 fps.
    Once in New Project, I dragged the movie onto the Timeline, then up poped a box saying something like "Fix Quality Problems", whch I accepted.
    Q1 Which is the best frame rate to record in, to subsequently bring media into Premiere Elements 9?
    I am in The UK so we have PAL and therefore, I could use 24p or 25p   - 25 p is 25 fps, and 24p is 23.976 fps. per the Canon manual.   [NB the Canon will not record at 50 or 60p in PAL]
    Q2, I read somewhere that some Video Editors can not accept a movie file in its native format , and thus change it to a different format and then edit it, and then export and convert it back - often with a serious loss of quality. I would like to maximise the quality.
    Q2i] Does Premiere Elements 9 do this converstion? If so does it harm the quality significantly - are there ways to avoid this?
    Q2ii] and if so, is there a recording format best suited for me to record in,  and subsequently import my videos into Premiere Elements 9?  eg would it be better to record in 25 fps?
    Q2iii]  There was also a screen somewhere about this section like 2,2,3,2,2  I think its something to do with pulldown?  What is the best setting for the highest quality?
    Background info:-
    I shot my videos with my new Canon DSLR 5D MkIII;  I set the movie quality to:-
    PAL, 1920 x 1080p  ALL-I (this was the highest quality the 5DIII can record at, there was an "IPB" option for lower quality).  And I selected 24 fps  - which the manual says is actually 23.976 fps
    The manual also says it is a MPEG-4 AVC/H.264 [movie recording compression] Recording Format = MOV
    But  strangely it loads onto my laptop as a "Quick Time Movie". I was expecting to see a .MOV file. [whether this is because this Sony Laptop comes with 'PMB Organiser' and view software. Or the hated iTunes changed how things are imported, I just don't understand any of this stuff .  All I do know is iTunes repeatedly tried to change my default viewer. So did it change the format, which files are imported in?? [re loading the files from my cameras CF card into my laptop]
    Any advice much appreciated
    Peter

    Peter,
    The way out of the project is encoding. And recoding tends to degradation of the export in varying degrees for different formats. Typically DV AVI undergoes less change with reencoding than the rest. But, we are not dealing with DV AVI here. Your source appears to be
    AVCHD (MPEG4 AVC/H.264) video compression
    1920 x 1080 16:9 @ 24 progressive frames per second
    Rather than export the Premiere Elements 9.0/9.0.1 Timeline to a .mov file or something else and then importing that into Premiere Elements 11 for is AVCHD export, please consider trying to open the Premiere Elements 9.0/9.0.1 project in Premiere Elements 11 and then proceed there to export Publish+Share/Compute/AVCHD with Presets = MP4 - H.264 1920 x 1080 p24.
    Keep in mind that if you take a project created in Premiere Elements 9.0/9.0.1 and edit it in Premiere Elements 11 and then decide to further edit it in Premiere Elements 9.0/9.0.1, cannot do. And, if some unexpected perk allows the opening of the Premiere Elements 11 edited version, there will be problems. Unless there is a special reason, best complete a project in the version that created and create anew in the newer version.
    A just in case note, the original on the hard drive is not altered. Premiere Elements traces back to the original from the Project Assets thumbnail (copy of original).
    But, you should make the comparsion between your H.264.mov opportunity in version 9.0/9.0.1 and your AVCHD.mp4 opportunity in Premiere Elements 11. I believe that you said that is your intention.
    For your Premiere Elements 11 tryout download, check out another browser. I always had to go to Internet Explorer for that download. Firefox never was good for that. But with this version 11, Firefox did the job. I had better results saving the downloaded folder to Documents than I did to Desktop.
    Please review and let us know if I have targeted your questions. If not, please detail what I overlooked.
    Thanks.
    ATR

  • Print Quality problems

    My print quality for Reds & Greens is coming out streaked. The blacks and blues are fine. I use HP ink cartridges anad keep them cleaned and aligned. But on the Alignment page the reds & greens are streaked and cannot be cognized. Could this be a print head problem ? 

    Hello novemberwolf,
    Welcome to the HP Forums.
    I see that you are having some printing issues when attempting to print in colour.
    Please click on the following link on Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

    Hello,
    We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
    Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
    This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
    ApeosPort C5540I
    Xerox LF6605 MF
    The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
    Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

    The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

  • Serious performance problems on iWeb site

    Can anyone help me find the problem with peterlance.com? It looks like author Peter Lance uses iWeb to update his web site. He redesigned it recently (and did not use iWeb for the old design). Anyway, it has serious performance problems on Internet Explorer, which I was hoping you guys could help pinpoint? Is there something simple I can tell him to try to fix the problem? He is launching a new book on Tuesday so he will be getting a lot of traffic, but for now the response time is not very good. Any suggestions?
    In particular, each new page seems to hang for about ten seconds and freeze using Internet Explorer 6. Any fixes?
    I mean, fixes other than: "Don't use Internet Explorer!"
    http://www.peterlance.com/Peter%20Lance/Home/Home.html
    name="Generator" content="iWeb 1.1.2"

    Welcome to the discussions, TopDog08.
    There are several plain .jpg's and that's good, but you need to convert every .png on the page (or as many .png's as you can) to a .jpg. For example,
    http://www.peterlance.com/Peter%20Lance/Home/Homefiles/shapeimage46.png
    Convert that to a jpg, then replace the graphic and text on the iWeb page with this converted jpg (some have has success using Downsize http://www.stuntsoftware.com/Downsize/)
    The ones you won't be able to do anything about are the ones that are a part of the blog, but that will be only 5 images instead of the many you have now.
    This image
    http://www.peterlance.com/Peter%20Lance/Home/Homefiles/shapeimage50.png
    Is covering part of your menu which is why it appears that only the top half is sensitive to rolling over. You'll have to adjust your layout to account for this.
    Another area to look at, there are white boxed png's surrounding the amazon book covers at the top.
    http://www.peterlance.com/Peter%20Lance/Home/Homefiles/imageEffectsAboveAli%20Mug%20TPI%20jpg.png
    Another set of .png's you'll have to get rid of. How did those get put on the page?
    What you see happening with IE is a java script running to fix IE's problem with png's. The fewer .png's you have, the less of a problem with IE you have.

  • Serious performance problems after updating from 10.5.6 to 10.5.7

    I've got a Macbook Pro C2D 15" (late 2006). After updating the system from 10.5.6 to 10.5.7 and quicktime to 7.6.2, I experience serious performance problems which I have never seen before:
    -From time to time, kernel_task has peaks in activity monitor (consumes a lot of CPU). In that moment, the mouse hangs for a short moment and audio playback is distorted/has drop outs.
    -Recording audio consumes a lot of CPU (independent of the audio application).
    -Video playback consumes a lot of CPU, regardless if I use VLC or the quicktime player.
    Any idea what could be done? Thanks in advance.

    After a few days of using CoolBook I report that my 1st generation MacBook Air is now reliable and never overheating, regardless of environment conditions.
    I must point out that I do believe that it really is something new in 10.5.7 that is causing this problem as my environmental conditions have not changed and even Summer in Dublin still sees temperatures no more than 72F/22C. I am now in Madrid, where the environment is quite different, and I am still having no problem with kernel_task spinning.
    I plan on reporting my problem to Apple anyway and being aggressive about the issue as MacLovinRanga did in this thread (http://discussions.apple.com/thread.jspa?messageID=9647353#9647353). Perhaps many/all of those of us having this problem will obtain new MacBook Airs.
    Joe Kiniry

  • Serious performance problems

    Hi
    I am having some very serious performance problems witgh java web start. I have a swing client that transmits XML/HTTP to and from a server, parses it, etc... I am finding that the XML/HTTP data request
    is a factor of 10 to 100X slower, at least, using Java Web Start than without.
    Any suggestions would be helpful
    Thanks
    Charles

    Charles,
    I've also observed some overhead when running an application deployed with JAWS compared to running the application from the jar, or in my dev environment.
    After searching these forums a bit, I found this buried nugget of info: Try System.setSecurityManager(null) if you are requesting <all-permissions/> already.
    Before the workaround, my application was taking 194 seconds for a single analysis run. After this workaround was applied, the same analysis run took only 82 seconds.
    So as you can see, there is considerable overhead associated with performing operations through the layers of security (my guess). My particular application does a lot of disk I/O (which is probably something the security manager watches closely).
    I stress the 'workaround' aspect of this because I haven't fully investigated the ramifications of using it, but eventually this might turn into a bug submission (because if I'm already requesting all-permissions, why do I still need to do setSecurityManager(null)?).
    At any rate, hope this helps!
    -jw

  • ***Serious iPod Problems***

    My brother is havign some serious iPod problems. A while ago the battery died after having it for about 2 years. He just had the battery replaced, it will atleast bootup now, but it wont get passed the Apple logo. I can get it to boot into Disk Mode, then reset it, but it still wont get passed the Apple logo. Does anyone have any idea what's happened to it?
    Thanks in advance!
    Matt

    Hi Jeff, thanks for the response, i have been able to do that a bunch of times today, i've even opened up the Disk utility and erased and then done it, no such luck, it just wont get passed the apple screen

  • Serious System Problems. Pictures and Documents folders are opening iPhoto when clicked. iPhoto Library gone.

    I have been speaking to Old Toad for the majority of today trying to fix my iPhoto Library as its become corrupt and I cannot get my photos/videos back into iPhoto. After many many suggestions I seem to have created some serious system problems.
    PLEASE READ ALL OF THIS THREAD...
    https://discussions.apple.com/message/21742033#21742033
    If anybody can be of assisatance that would be a great help.
    I am a mac dummie, recently transfered so foolproof guidance will be helpfull!
    (Unfortunatly.. and now I know the importance, I haven't used time-machine and my mac isn't backed up. If i restore to factory settings I will loose the 600+ photos and videos I had in my iPhoto Library.... which dissapeared, which is the whole reason why I created the first thread)
    Thank you!!

    Linc:
    It appeared to me that somehow the OP's Picture folder was converted into an iPhoto Library as his screenshot of the PIctures folder looked like the inside of a library.
    This statement by the OP make me think it might be more than just an iPhoto issue (the bold text):
    I am unable to drag the Picture folder to the desktop, It wont move, and iPhoto (which is still empty) just opens.
    Some how the same is happening with Documents,
    OT

  • Serious display problem. Please help!

    I'm having a serious display problem all of a sudden. It is not application specific. Various different applications are pixelating, especially wherever I move my cursor and click the mouse. When I grab the entire application with the cursor and move it, the image duplicates into hundreds of images all over my screen. If I shake it around awhile, eventually it goes back to normal. What is going on??!!
    Here's some background info: I'm on a 2009 Mac Pro. I still use the old fashioned tube monitors with mini display port to VGA converters, but I've never had a problem up until now. Just before the problem started happening, I tried to open up some .jpg files in Quicktime Pro 7. 
    I would greatly appreciate any ideas of what the problem could be and how to fix it.

    Welcome to Apple Discussions!
    Might you have moved the Home folder or its contents, or renamed it? If you think that's what happened, this article may help:
    http://docs.info.apple.com/article.html?artnum=107854

  • Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

    sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
    its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

    Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Also take a look at these tips to prolong the battery life again:
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • QUALITY PROBLEM FASH STORAGE

    I bough my MacBook Air in 2013, after 2 years using only internet, photos and music, nothing havy, I updated my OS X Yosemite and my computer turned off and never turn on again, with a question folder on it.
    I look for the online support, I made step by step that exist on website and nothing happen. Even the chat support I did! However, nothing change and nobody could help me from apple.
    So, I took my MacBook to the authorized technician support, that even the technical could not explain to me what happend with my flash storage, I totaly lost it.
    I know that have a poor lot of flash storage that was sold between 2012 and 2013, the year I bough, but was in August and they said that the bad quality lot was until June, who guarantee me that was not this quality lot?
    The problem of my computer for sure was a quality problem, I didnt used in a bad way.
    The budged of the service is too high, almost a price of Sansung laptop, and I am wander if someone can give me a solution or something that can help, because apple didnt reply my quality problem, nobody nows why the computer is off and is pretty new.
    I'm out of USA and hope to get my solution soon, because its a disrespect with the consumer.
    If someone can give me a reply, I will appreciated.

    Hi guys
    I have the same problem however I am able to retrieve and play back the audio files but bnot able to retrieve screen capture video files
    I am also migrated it to network storage. Video files are being uploaded to the new location with nno issues but they are not being able to be retrieved any suggestion
    I am getting the following messages:
    The message they are getting is as follows:
    There are two windows appearing quickly saying that the files are decoded and initialized successfully. Then we get the window displaying” connecting to video file please wait while a connection is established
    The message they are getting is as follows:
    There are two windows appearing quickly saying that the files are decoded and initialized successfully. Then we get the window displaying” connecting to video file please wait while a connection is established
    The message they are getting is as follows:
    There are two windows appearing quickly saying that the files are decoded and initialized successfully. Then we get the window displaying” connecting to video file please wait while a connection is established. then is stays there and does not retrieve files
    Abdul

  • Quality problem exporting from FCE

    Hi,
    i have a quality problem exporting from FCE. I have finalized a 30 minute movie and want to send it to friends on DVD or CD-ROM. when i use "export as quicktime movie" the file has 6.5 GB and won't fit on a DVD-ROM. when i use "export with quicktime conversion" and choose quicktime movie with H.264 compression and highest quality the movie goes down to 4.2GB. Now it would fit on a DVD-ROM, but the quality is not good. The picture looks blurred and i see some type of interlace-effect.
    which type of export format do i have to choose to avoid the interlace and blurred pictures? is there a magic format that does not cost that much quality and reduces the movie by 30-40%? or would a video DVD work better? how do i create a DVD? with iDVD?
    thanks for your help!

    or would a video DVD work better? how do i create a DVD? with iDVD?
    That's what Id do.
    Export as QuickTime Movie (reference file is OK) and drop the export to iDVD.
    You will get 1 hour of FCE Timeline on a single sided disc using Best Performance (iDVD setting).
    Two hours using Best Quality (iDVD setting)
    Al

  • Serious quality loss with MTS files and iMovie '11

    Hello,
    I have some issues with my brand new Panasonic HDC SD700 (a full HD camera)
    I experience serious quality loss when I use iMovie to create a movie.
    I did some tests, but still puzzled int this world of codecs and formats.
    Maybe some of you can help.
    I have made a short shot of 450 sec with highest mode (1080p 24fps)
    It show is finder as a .MTS file size 99MB, I'm very happy with the quality when I play this with VLC.
    iMovie turns this file into a .mov file with 635MB size, in Apple Intermediate Codec, Linear PCM, Timecode. This quality is already poor compared to original MTS file.
    No wonder that the output file (select 1080p H.264 codecs) results also in unacceptable quality.
    I'm running latest imOvie version with all updates etc.
    I have no idea were to look to solve this issue. It is quite annoying since I have invested in a top Cam recorder. Not sure is Final cut express will sure the issue either.....

    I have made a short shot of 450 sec with highest mode (1080p 24fps)
    Have you tried shooting at the PAL standard of 25fps? I checked the specs for your Panasonic but didn't see any mention of a 24fps mode, but most reviews seem to miss mentioning the shooting modes. If you did indeed shoot at 24fps, did you choose this frame rate when importing to iMovie '11?
    I export as 1080p (same as original. My output is a bit blurry and colors are a bit pale.
    Did you use the 1080p preset under Share to Media Browser, or Export using QuickTime? If the latter, be sure to select an appropriate data rate - if set too low this may result in poor quality output.
    And yes you are right I'm using IMovie '11, quite confusing that '11 means version 9.0
    Yes - very confusing! In the forums, iMovie versions are generally referred to by their year number, not version number. It's a pity that we have version 9.0 (iMovie '11) and iMovie '09.
    Glad you liked the video - it looked very clear on YouTube at 1080p Full Screen, at least to my ageing eyes!
    John

  • Subcontracted Stock at Vendor has quality problem - must be blocked

    We have stock at a Vendor (Special Stock Type O) that has a possible quality problem.  It must be put on hold until we determine the extent of the problem. 
    It is still showing up in MD04 as available stock.  I tried to move it to QI with movement 322 but it still shows up as available.
    How can I block that stock from consideration by MD04 without physically removing it from the Vendor?
    Thanks in advance.
    Best regards to all!

    Hi ppkk,
    Thanks for your thoughts.
    The problem is that this stock is at the vendor, so there is no storage location.  We have Quality related Storage Locations for stock in the plant, and if we move parts to those storage locations they do not show up as available stock in MD04.
    But the Special Stock type O is just "Stock at Vendor" with no Storage Location.
    I think that we would have to receive the stock back into our plant in order to move it to a Quality related Storage Location.
    Does that make sense?
    Thanks again.

Maybe you are looking for