Serious service failure in zip code 70119 / 70122 at the New Orleans Jazz Fest Weekend 1

I experienced total service failure in zip code 70119 & 70122 at the New Orleans Jazz Fest. No send / receive of data, voice or text. I use an iPhone 5s running the latest OS. I had better service during all hurricanes, except Katrina, of course. The only evidence I have of this are screenshots of pinwheeling texts and Facebook posts. Oh, and I have a very ****** off wife for not being able to contact me. This was a first, but it was a weekend-long frustrating affair. Please address this before next weekend's Jazzfest. I'm not the only Verizon customer pinwheeling.

Similar Messages

Poor service in 75248 zip code

Whats up with the terrible disconnections and overall poor performance in the 75248 zip code area? All of my neighbors have the same bad opinion of uverse. I am really close to just switching back to time warner cable and paying your disconnect fee that should be deemed as theft given your lack of ability to provide a reliable conenctions. No one in the neighborhood is happy with their service.....here is an example of complaints from our neighborhood facebook page. I don't really need a response....just a resolution to the terrible service. http://imgur.com/XTF5T1l

I understand your cost concerns bamamac! The nature of our service (radio signal) presents many factors outside of our control that may impact signal (sometimes greatly). The Network Extender is a one time investment that can resolve indoor service issues at your home with the assistance of your internet service. While it is not guaranteed that this will resolve the issue, you can returned the device within 14 days if it does not work to your satisfaction.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Recently I have been unable to acccess my local weather or other zip code weather reports on the Weather Channel using my laptop. My wife has no problem accessing from her laptop from same location.

This problem is new. I have always been able to access the Weather Channel's website and obtain weather reports for various zip codes. I have Window 7 and use Firefox and Google. I have The Weather Channel as one of my Bookmarks. The site comes up when requested but the three locations that I had listed are not evident and when I type in the zip codes nothing comes up.

Hi there, I have the same problem with my envy 17ts-j100. I was trying to recover and I had a reset failed massage to I powered it off and went to sleep. The laptop won't boot to bios with symptoms as above.
Somebody please help out.

IWork and iLife purchase with codes not valid on the new computer?

Hi,
last year I downloaded the iWork and iLife suites on the macbook pro provided by my school. I'm not sure how it works but I had the iWork suite and I used to update it with my Apple ID, now I can't. I just got an old macbook air (sold before the apps were included for free) and I was trying to download the suite but it's not in the purchased apps and it's not free. I used to have them, do I have to buy them again?
Regarding the iLife suite the situation was slightly different. I basically downloaded them with some codes given me by the Apple support, do they work only for a single computer?
Thank you!
P.S.: In case I can't download them again, do you know if Apple offers discounts on its apps for students?

Apple does not offer education discounts to individuals for software.
If the Mac belonged to the school, the apps also belong to the school. If you now have your own used Mac, then you will need to buy the apps for yourself.

How to I report poor LTE service coverage in zip code 94403?

I have a Jackpot, a home router and 2 iphone 5 in my house and 4G is slower than 3G or sometimes not loading any data. I just moved to this area so I don't know how long it's been this way. I made numerous phone calls to the Verizon service and tried all trouble shootings suggested on similar discussions here. This router is not a mobile device and it's been sitting at home not working and I cannot pay for the service I am not using. I'm about to cancel my home plan since there's no improvement whatsoever after my phone calls. Please don't respond with same repeated solutions that didn't work. Let me know what you can actually do to fix the problem on your end. My devices are perfectly normal in other areas. Thank you.

bimil0 Reliable coverage is a must! We apologize for the issues you have experienced with service in your new area. Our goal is to provide the best solution and keep you as a happy customer. You mentioned that you have called us and completed all troubleshooting, have you also had a network ticket filed?
SheritaH_VZW
Follow us on Twitter

Seriously... are display prefs just bad with the new MacPros?

2010 8Core MacPro with ATI 5870 video card. OS 10.6.5
This is my second 2010MacPro.. first was was replaced by Apple due to some hardware issue.
Driving 3 monitors - 1-30" Apple, 2-24" Dell Ultrasharps.
Using 2 Dual-Link DVI to Mini Display adapters (for the Dells) and plugging the 30" Apple straight into the cards DVI slot.
NOTHING allows display preferences to be retained after the screensaver goes to sleep. The ONLY way I can get my display preferences to remain is to set the screen saver to run for a couple hours, since i'm usually not away for more than that when working.
This SAME EXACT OS install worked perfectly in a 2006 MacPro with 2-nVidia 8800GT cards. And I mean EXACT. New 2010MP arrived, I installed everything.. was informed the machine needed to be replaced, I yanked the HDDs and put them into the 2006MP and booted right up, no issues. Replacement 2010MP arrived, I pulled HDDS for the 2006MP and put them back into the new 2010MP.
Is anyone else finding it difficult to maintain display preference settings on the new MacPros if your'e driving 3 monitors?
Thanks

As Mac OS X is a Multi-User system, and your user_id could (in certain configurations) be associated with a multitude of displays on a multitude of Macs, those preferences are found in unusual places.
Most are in your Home Directory. If the permissions on your Home Directory are damaged, so that you do not have write access to some of these folders:
<your_home> > Library > Preferences
<your_home> > Library > Preferences > ByHost
and files with names like:
com.apple.preference.displays.plist AND
com.apple.preference.displays.<M.A.C. Address of this computer>.plist
you may not be able to store your settings.
The general test is to create a new User account, and see if the problem recurs with a Brand new User account.
One broad preventative maintenance step is to Repair Permissions.

How do I report poor service in zip code 22845 Virginia?

My iPhone 5 has spotty service at best in the region 22845. My phone generally says 1x or 3g with one bar but overall won't send messages.

You've come to the right place for help, gdhokie. It looks like that zip code is right at the border of Virginia and West Virginia and the terrain in the area may cause some service difficulties. How long have you experienced these issues? Try entering your address into www.vzw.com/maps to check coverage for your area. Our Network Extender http://vz.to/IHRT6h would help for service at your home.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
Thx

Hello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cannot update CC info--says zip code is wrong but won't save!!

I just moved and when I went to buy a song in itunes it said my zip code doesn't match the bank info. So I go into my account and update the info with my new address so it matches my bank info and I press done and go back to buy a song and it gives me the same message. When I go back into my account again, my old address is there. This happens NO MATTER WHAT I DO--I tried adding a new CC, tried switching my payment info to Paypal. Whatever I do, it says it takes it, but if I go to buy a song, it goes back to my old account info. WHAT DO I DO??? I have been trying to buy this one song for 30 minutes!~!

I would try emailing iTunes store customer service:
http://www.apple.com/support/itunes/store/browser/
I would try switching your Payment Method to "none" and then signing out of your account completely (Store menu > Sign Out). Then, sign back in and go to enter your CC info again. You might want to contact your financial institution to see if they've switched your billing address over in their systems yet. If they goofed something, it might explain why iTunes is rejecting your info.
CG

Nearest search base on Zip Code

Hey All,
I need some help for my following requirements -
-> In my web base product , client wants to add near search location base on zip code - that means if user enter zip code then user will receive nearest location within 5 or 10 mile.
Like if we open subway or In-N-Out site for find out nearest store location
Please let me know - How Can I do this task
thanks
amit

I've never done such a project before. However, here are some ideas:
* You need a list of every zip code in the country and its latitude and longitude (for the geographic center of each zip code).
Search google for something like this:
zip code latitude longitude
Ideally, you should be able to find a free listing. If not, you should be able to purchase one cheaply.
* Next, you need to create a list of stores, thier addresses, and their latitude and longitude.
* Next, write a program that determines the distance between the list of zip code latitudes/longitudes and the latitutude/longitude of the store in question. From that list of distances, search for and get the ones within x miles of the store.
Alternatively, you might want to see if there are any pre-existing services to do the above functionality for a small amount of money. I imagine mapquest might have such a service.

SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49        8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04        8272 (0x2050)
Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.

Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu

[Best practice] How to call a service from custom Java code

Hi all,
I'm wondering what the best method is to call a standard service from custom Java code?
In a specific situation iDoc script is extended with custom functions with a custom component. There's Java code mapping to these functions that is executing these functions. The iDoc script functions are called from a workflow entry script.
In the Java code that runs when the custom iDoc functions are called, I want to call a standard Content Server service. I don't think that the m_service variable is available, so filling the binder and using m_service.executeService() probably isn't possible.
Also, if it were possible (that is, if I want to call a standard service from my own custom service Java code), what would then be the best method to do so?
Regards, Stijn

Hi Sapan,
Let me explain a bit further.
I'm an UCM consultant trying to solve a problem that occured at a client when they installed the CS10gR35CoreUpdateBundle.
Content items are entered into a Workflow when they are checked in. Part of one of the entry scripts of the a workflow step is that related content to the content item in the workflow is (re)submitted for conversion.
To achive this, a custom component provides an iDoc script extension. This iDoc function (resubmitForConversion) is implemented in Java (the class extends ScriptExtensionsAdaptor).
In this Java method, first the related content items are fetched. Then the service RESUBMIT_FOR_CONVERSION should be called for all dID's in of the related content.
Thus, at a certain point in the custom Java code, a native Content Server service must be called. Of course the class of this Java code does not extend the Service class, so the m_service object isn't available.
The thing is: before installed the 10gR35CoreUpdateBundle everything worked OK. This code was used to execute the service:
        Workspace workspace = CommonUtils.getSystemWorkspace();
        String cmd = binder.getLocal("IdcService");
        if (cmd == null) throw new DataException("!csIdcServiceMissing");
        ServiceData serviceData = ServiceManager.getFullService(cmd);
        if (serviceData == null) throw new DataException(LocaleUtils.encodeMessage("!csNoServiceDefined", null, cmd));
        Service service = ServiceManager.createService(serviceData.m_classID, workspace, null, binder, serviceData);
        UserData fullUserData = CommonUtils.getFullUserData(userName, service);
        service.setUserData(fullUserData);
        binder.m_environment.put("REMOTE_USER", userName);
        ServiceException error = null;
        try {
            service.setSendFlags(true, true);
            service.initDelegatedObjects();
            service.globalSecurityCheck();
            service.preActions();
            service.doActions();
            service.postActions();
            service.updateSubjectInformation(true);
            service.updateTopicInformation(binder);
        } catch (ServiceException e) {
            error = e;
        } finally {
            service.cleanUp(true);
            if (!CommonUtils.isWorkspaceConnectionInTransaction(workspace)) {
                 workspace.releaseConnection();
        }the first problem was that the CS began to complain that a transaction was started within another transaction. So I suspect that the 10gR35 update wrapped a transaction around a workflow script entry.
With some decompiling I figured out how a service is called from iDoc with the <$executeService()$> command. So I replaced the code above with:
              String cmd = binder.getLocal("IdcService");
            ServiceData serviceData = ServiceManager.getFullService(cmd);
            if (serviceData == null) throw new DataException(LocaleUtils.encodeMessage("!csNoServiceDefined", null, cmd));
            Workspace workspace = CommonUtils.getSystemWorkspace();
            Service service = ServiceManager.createService(serviceData.m_classID, workspace, null, binder, serviceData);
            UserData fullUserData = CommonUtils.getFullUserData(userName, service);
            service.setUserData(fullUserData);
            binder.m_environment.put("REMOTE_USER", userName);
            service.initDelegatedObjects();
            service.executeSafeServiceInNewContext(cmd, true);This solved the transaction problem but introduces another problem: !csUnableToResubmitItem,(null)!csIllegalScriptAccess,RESUBMIT_FOR_CONVERSION
The Service Reference Guide says that the access level for RESUBMIT_FOR_CONVERION is 33 (Read, Scriptable). However, in shared/config/resources/std_services.htm the access level is specified as 2 (write).
Thus, my question still is:
What is the best method to call a standard Content Server service from any Java code (so without extending the Service class, or having the m_service object available)?

Zip Code in cell

When I typed a zip code into one of the cells in my spreadsheet, the zero at the beginning was deleted. how do I get it back?

1) format the cell as text BEFORE entering the zip code
2) make a customer zip code format. See this previous post:
https://discussions.apple.com/message/18144582#18144582
In both cases you use the cells inspector

How to have ICWeb Identification screen on top left show premise zip code

Previously in one of our training environments anytime a Business Partner and Premise were confirmed the top left hand screen in the ICWeb would show the BP first and last name as well as the premise and the premise zip code. In our production environment the top left hand screen shows everything except for the premise zip code.
Can somebody please explain how this field can pick up on the premise zip code whether it is done through SPRO or coding?
Thanks
Dave

Hi David,
This is proper coding issue. As you want premise zip code to display in the contact information box. If I am not wrong. You can do it in Component CRMCMP_IC_FRAME. In the custom controller there is method SET_CALLER_DISPLAY_BPNAME where you need to get the premise zip code data and concatenate it to caller_display_name variable.
Hope this will solve your issue.
Thanks,
Albert

Content Server Test Service failure

Hi all,
I have installed the content server and I activate the service through SICF t.code. I got the result as HTTP 400 - Bad Request. how to rectify this?
Regards,
Kiruba.R

Hi,
Am facing the same issue... How did you resolve this? Any pointers on it would be of immense help..
Thanks
Nikhil

Serious service failure in zip code 70119 / 70122 at the New Orleans Jazz Fest Weekend 1

Similar Messages

Maybe you are looking for