Serious situation help please
Guys, it's a terrible situation.. my sister had an iphone 4 before she passed away and after 5days i found it, i dont know her apple id or password to activate it but i believe that the phone has some memories,pictures of her - is it anyway possible to activate it ? I would really appreciate any advice/help and sorry for my bad english.
Please do not get so much worried. Get a third party apps from internet ( that is itunes alternative, any software other than itunes will not ask for any APPLE ID or PASSWORD) , that will help you to keep PHOTOS, VIDEOS & OTHERS that were kept in that iPhone. And then try to RESTORE.
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After RESTORING you are then able to have an activated device.
Similar Messages
-
NO INTERNET CONNECTION, SERIOUS! HELP PLEASE!
Ok, I have had the Linksys for about a month now and everything was fine. Then suddenly it started dropping the connections, and finally it just dropped. So, I was trying to re-connect and now I'm getting a "no internet connection" and I have no idea what to do !!
Please, someone help. Sometimes I get a "you have a static IP but no real connection", and sometimes my router is not supported.. and its always random. I'd really like to fix this as soon as possible, thanks. I know about the IP release/renew, but it isn't helping. And I checked my networking settings and it says my DSL modem can't get a TCP/IP established..? but when I connect directly to my computer, it's fine, but when I connect to the router.. says same thing but it works o.O. Such as "TCP/IP is not enabled to connect".
-
Serious, possible spyware problem, help please
I have a serious situation happening and I have no idea where to go with it so hoping you guys can help.
I have a Nokia 2760 so a very basic phone but some strange things have been happening lately.
Firstly a few weeks back whenever I would call someone on the display screen it would not only list the person I was talking to but have my mothers contact there as well, I asked her if she was getting calls and hearing everything and she said no, so I just deleted her from the contact list and put her back in and it stopped.
Then 2 weeks ago while out with my husband she received a call from me and she heard 10 seconds of our what we were talking about at dinner. It was recorded on her voicemail so I heard it and looked at her log and it showed a call from me but my log showed nothing.
Then last night was the most disturbing, she once again got a call and it recorded what my husband and I were doing onto her voicemail again but once again no log on my phone showing I made a call and I know for a fact my phone was sitting closed on my bedside table.
What could be doing this? I looked it up and saw there is a program called flexispy that turns your phones microphone on by a remote user but being such a basic phone I find it hard to believe someone has control over my phone. Is this at all possible? and if so how do I find out if it's on my phone and how do I get this to stop, I am totally weirded out and it's disturbing to say the very least!!
ThanksThere is no spyware for S40 phones like the 2760. It's just a minor software corruption that can happen with any phone.
Start by performing a revert to factory default settings. Enter *#7780# from standby and provide your security code when prompted. Unless you changed it, 't should be the default on all Nokia phones, 12345.
If this doesn't work, you'll need to take the phone to your nearest Nokia Care Point for them to reflash it. In this case, back up all your data on the phone first because this operation will wipe its memory clean.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.
Argh that's frustrating! I never noticed that key did not work in InDesign.
A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
Maybe ask on the scripting forum? InDesign Scripting
I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
But the option to toggle this setting was scriptable. -
I have an ipod touch 4th gen and when I plug it into my computer it shows up but it wont on iTunes and I was trying to put more music on it today and it wasn't showing up can u help please and thank you.
Hey Babetta94,
Thanks for using Apple Support Communities.
After reviewing your post, the iPod is not recognized in iTunes. A frustrating situation to be sure. You haven't mentioned what OS the computer you are using uses. You can choose what article to use either OS X or Windows from this quoted section.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
If you have an iPod touch:
For Windows: See iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
For Mac OS X: See iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Have a nice day,
Mario -
Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? I need to persuade someone that this really is worthwhile. Mr Ignorant.
The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ... -
My IPhone 5, was backed up and restored. Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option. I have reinstalled ITunes but still this hasn't worked. Can anyone help please?
This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.
-
Itunes will not open. I click onto the icon and it does nothing. I've uninstalled it twice and still nothing. Rebooted and nothing. I plug my iphone as well as my ipod and still nothing happens. Help please.
I, too, am having a serious problem with my iTunes.
It shows that iTunes is taking up usage on my computer but there is no error message when I try to open it. Nothing even happens. iTunes does not come up and I am searching for a possible answer.
We recently had a power outage but we got power back Sunday and when we did iTunes stopped working. Before this incident iTunes usually worked and when it didn't a simple re-start was used to fix it. However now I have tried that several times and it is not working.
Help? -
HP MediaSmart Connect x280n AC Adapter HELP PLEASE!
HP MediaSmart Connect x280n AC Adapter HELP PLEASE!
Please someone tell me where I can get an AC for this unit and if not, please tell me the part number of this AC Adapter if you own one of these please? I have iterally looked for over 15 hours the past 2 days and called HP only to be passed on from department to department with not one clue as to this part number or where I can obtain an adapter for my unit. I found only 2 on ebay that had visible markings on the AC in the pics but could make out neither of their text.
Thanks in advance for any help.Did you ever get an answer to this question?
I'm about to be in the same situation, and have been trawling the web to try to find a specification for the power supply.
I can see that the unit requires 19V at 22W, but that's all.
I don't know the size of the DC connector that is required.
Thanks! -
N97 screen cable =( help please!
my n97 that i absolutely LOVE wouldnt start the other day;
i figured it was coz it ran out of battery
after charging it and turning it back on,
the screen wouldnt turn on?
everything else was fine;
it made the nokia sound at the start
and the keys lit up also.
after looking at it;
i realised that the screen cable;
behind the screen; had snapped?!
is there anything i can do to fix this?
also;
if i have to take it to a store to get fixed..
how much and how long will it take?!
-i'd appreciate any help i can get. =)If its hardware, I would definitely recommend that you take it to Nokia care center. I dont think that it is not covered by warranty since I cannot think of a situation normally when the cable would just snap.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..
Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again. -
"We could not complete your iTunes store request. The connection was reset". Help please!
Help PLEASE!
Let me explain my situation:
- iTunes store has been working fine on all computers for the past few years.
- Modem gets struck by lightning last Mon.
- Get a new Netgear modem yesterday.
- Internet all working fine. Can browse, download etc. in browser (Mac App store, and iDevices App Stores all working fine, too)
- Cannot connect to iTunes store. Get error "We could not complete your iTunes Store request. The network connection was reset".
- I Get the same error on 2 MacBooks, but i can browse the store on my 2 Win7 PC's.
- I managed to connect and browse on my one MacBook using a 3G modem, but still no luck with the ADSL connection.
- I have tried connecting via wired (ethernet) connection to the modem. Still no luck.
- I have had this problem on iTunes 10.2, 10.4, 10.5 Beta, and 10.5.
Does anyone have any idea what is going on here? Any help and advice would be greatly appreciated!
Thanks!
George.
Modem Model no.: DGN 2200with everyone downloading the update, the servers are probably bogged down with requests, probably just wait it out and it will start to download and get you back up and runnin
dante -
HP Pavilion a6000 desktop with Vista black screen - need help please!
I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future! -
So I was updating my iTouch, and when I unplugged it when I thought it was done, it had the symbol to plug it back into the computer. I knew it was done updating though, so I turned it off and then turned it back on. When it was finished restarting, it still had the same symbol, so I plugged it back into my computer. It wanted to back up my media, but I clicked cancel. Then I "ejected" my iPod. I started browsing through my iTouch, instantly realizing that every single one of my apps, songs, and podcasts were deleted!!! Somehow, my iPod was wiped!! My iTunes account still has the complete purchase history, so if I contact someone, can I PLEASE PLEASE PLEASE get my media back? It cost me a lot of money to buy the first time, and I seriously would not like to repurchase every single app and song. HELP PLEASE!!!
Tacos--
Your apps can be downloaded again; those should be in your purchase records.
Music...not so much. There's copyright issues there; this is why one should back up one's music every so often. (and pictures, and other important documents.)
You might try plugging the iPod back in and letting it synch...and waiting until it's done and it says it's done, and seeing how that goes.
Doc -
Hi All i have a ipod shuffle and it won't charge have tried everything any help PLEASE thank you
Have plugged ipod shuffle in computer but it says that no ipod is reconized why i don't know
when i plug it in itune should come up but doesn't
any help please
ps i'm a women as easy as poss lo
thank youKaren,
Sorry to here, i have my 4th Shuffle in a year time so best in that situation is to go to serveice and let them send you a new one. I must say that's the best part of the IPOD, the service
Good luck
Pedro
Maybe you are looking for
-
when i try to install frostwire it says fatal error occured and sends reports to frostwire im assuming i need an upgrade to do so , it came with a cd disk that said os x software but when i went to install it, it said there is a newer version already
-
How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.
-
Hi Can we call an ASP file in a JSP? Any help would be appreciated Thanks
-
We have an IR in Apex 4.1 which contains 99 report columns, and 1000+ rows. The IR displays correctly on the screen, and when we try and Download to CSV it works ok (we get all columns and rows). But when we try and Download to Excel we get; ORA-0650
-
Matrix with dates of months as column heading
Hi you all, I'm trying to generate a query with the books name, dates of months as column headings and show the count of books sold on that particular date. the expected format is 01-Jun-2006 02-Jun-2006 .................... 30-Jun-2006 Book1 2 4 0 B