Seriously missing WL install using console mode ...

Greetings --
I've been working with the WebLogic product since the BEA days of v6.0 and have just started working with 12c - specifically 12.1.3.0.0. I have always used the console-mode when installing my WL products and just experienced something that almost made me shed a tear.... the "-mode=console" method is no longer available.
I remotely manage 75+ WebLogic domains all in a LINUX environment and have the need to create/delete WL domains on a daily basis and the the ability to do a quick install is highly important. Console mode was vary fast, easy and saved me a lot of time since I was able to create/extend my WL domains locally on the server. Now I have to use the graphical option via X11 and the time it took me to create just 1 WL domain, I could have created 10-15 domains using the console mode.
What was the thinking behind the removal/disabling of this option - and why in the middle of a major version?? (According to DOC ID 1577869.1 console mode is unavailable in v12.1.2 & higher)
Thanks!!
Ed Langlais --

Hi,
this is very strange. I installed WebLogic on the server without X11 support. You have now to options:
1. Create the Domain via wlst (my Solution)
2. Start on the Server the vncserver and install via GUI.
I miss the Console mode also.
Regards
Borys

Similar Messages

Problem with configure engine in console-mode unix

i have a problem, i tried to configure an engine of enterprise in HP_UX, but the grapical-mode doesn´t work, how can i start the admin console in console-mode??? i tried ./albpmadmcenter -console but not work!!!

Hi,
You would have to install using silent mode to configure the process administrator. This option is available in Oracle BPM (OBPM). Not sure if it exists even with ALBPM 6.0.
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html?t=modules/admin_center/config_wizard/c_Running_Config_Wiz_Silent.html
Hope this helps.
Sarat

.jar installer fails in console mode over missing X / variable DISPLAY

Hi all,
I tried to install the WebLogic Server in console mode according to the Installation Guide for Oracle WebLogic Server 12c Release 1, but couldn't get past an error.
My system is a CentOS 6.4 with kernel 2.6.32-358.el6.i686 in a VMWare virtual machine, running text mode only (X is not installed). I have JRockIt installed, and variables MW_HOME, JAVA_HOME and PATH defined accordingly, and I am using a dedicated user to this installation. Both JRockIt and WLS are being installed in this user's home directory.
I downloaded the generic .jar installer for WebLogic Server 12.1.2 (wls_121200.jar) and tried to install the server in console mode, with this command:
java -jar <path>wls_121200.jar -mode=console
In the initial checks, the installer complains that the environment variable DISPLAY is not set and asks if I want to continue or not. The installation guide says this is not required for a console mode installation, so I chose to continue anyway. Then the installation fails with a Java exception:
java.awt.HeadLess exception:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
(Then the usual class dump)
Should the console mode install ask for X? Did I miss anything? What should I do to be able to install the server in console mode?
Many thanks,
Emerson

Hi,
There is no console mode in WebLogic 12.1.2. It has been remove.
See MOS note: "WebLogic Server 12.1.2 Generic Install Jar File Fails To Recognize Console Install Mode (Doc ID 1577869.1)"
Regards Peter

Can i use visual basic 2010 console mode or later versions on a macbook?

hello. i want to buy a macbook but i am taking computer classes that require visual basic 2010 console mode or later versions. Can i use this on a macbook or does it work only on windows' laptops?

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

How to install Oracle Webtier (OHS) in console mode

Is possible use the Oracle Webtier installer in console mode? I mean, with no GUI.
I need to install OHS in a Solaris 11 Box with no X. I don't want to use the ssh X forwarding.
If I read correctly the docs [1], there are only two options: GUI mode or Silent mode.
Is it possible?
Regards.
[1] http://docs.oracle.com/cd/E23943_01/doc.1111/e14260/install.htm
Edited by: Tuelho on Oct 1, 2012 11:51 AM

I assume you are working from the enterprise install documents (I've never read them). You might find the Enterprise Deployment forum helpful: http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

I have a blue screen on mac pro 6.2. OSX 10.6.8. I got into the computer using safe mode. I beleive I need to restore using my install disc. How do I restore? Is there an internet address to look up how to restore?

I had a blue screen on my MacBook pro 6.2 with operating system OSX 10.6.8.
I got into the computer using safe mode but could open any applications. I think I need to restore with my install disc. How is this done? Is there a web address for instructions?

http://pondini.org/OSX/Combo.html
http://www.wikihow.com/Reinstall-Mac-OS-X-(Leopard-and-Earlier)
Mac OS X v10.6 Snow Leopard: How to Erase and Install - Apple Support

How can I do to install Patch and RDBMS using SILENT mode in a Pentium 4 ?

I was installing the Oracle 8.1.6.0.0 in remote machines using a SILENT mode normally. But now, I`m having a problem with the Pentium 4. I need to apply a patch because of the bug number 1507768. And, after apply the patch, I don't get to install using the same response file (in a SILENT mode). How can I do to install the patch and the RDBMS using a SILENT mode in a Pentium 4?

I've created a new domain with this command:
$ asadmin create-domain adminport 18000 user admin dmRemineTest
I've installed the serviceWindows with this script:
SETLOCAL
SET I=C:\Sun\SDK
c:\windows\system32\sc.exe create JCAPS6U1_dmRemineTest binPath= "%I%\lib\appservService.exe \"%I%\bin\asadmin.bat start-domain dmRemineTest\" \"%I%\bin\asadmin.bat stop-domain dmRemineTest\"" start= auto DisplayName= "JCAPS6U1_dmRemineTest"
pause
ENDLOCAL
like the one suggest me in this forum, and thanks for it but now i have an other problem. I've started the domain dmRemineTest and it is running:
asadmin> list-domains
dmRemineTest running
domain1 not running
Command list-domains executed successfully.
I'm proving to access to eManager at link: http://intaliodevsrv:15000/eManager/Welcome.do
inserting this informations required:
Server Type: Sun Java System Application Server Domain (9.1)
Host Name: localhost
HTTP Administration Port: 18000
User Name: admin
Password: adminadmin
I insert into HTTP Administration Port 18000 from here:
<http-listener acceptor-threads="1" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="18000" security-enabled="false" server-name="" xpowered-by="true"/>
When I click on Connect to Server, eManager response with this message:
Connection Failed. Please check the following:
- Server Type is correct.
- Server is running.
- Hostname and Port number(s) are correct.
- Server SSL configuration.
How can I solve the problem?

Console mode service pack install in 6.1

Hi,
I am trying to apply sp1 to WLS6.1 on solaris 2.8 in console mode
java -cp wls61sp1_upgrade_generic.zip install -i console
The above command goes through the choose locale step
It then says press <enter> to continue.
At the next point it should allow the bea home to be selected
but it displays the following and ends
PRESS <ENTER> TO CONTINUE:
===============================================================================
Choose BEA Home Directory
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 1 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME .
Exiting the Service Pack 1 installer...:
Any suggestions. I have run this from the /u01/bea directory
and the /u01/bea/wlserver6.1 directory with the same results
Many thanks
Bill

Chuck,
Thanks for the response.
I do have a registry.xml file in my bea home direstory.
this is my registry.xml file it looks much the same as yours
other than the service pack entry.
It is in directory /u01/bea
<?xml version="1.0" encoding="UTF-8"?>
<bea-product-information>
<host name="icomapp1">
<product name="WebLogic Server" format="1.0">
<release level="6.1" Status="installed" InstallDir="/u01/bea/wlserver6.1"
InstallTime="14-Sep-01 12:01:54"
InstallSet="ServerExample">
<component name="Program" />
<component name="Samples" />
</release>
</product>
</host>
</bea-product-information>
Any other suggestions.
Bill
"Chuck" <[email protected]> wrote:
>
Bill,
Do you have registry.xml in your $BEA_HOME directory?
If not, you should be able to modify the following registry.xml for your
environment
and bypass the error you are seeing
<?xml version="1.0" encoding="UTF-8"?>
<bea-product-information>
<host name="cnelson" BeaProgramGroup="BEA WebLogic E-Business Platform">
<product name="WebLogic Server" format="1.0">
<release level="6.1" Status="installed" InstallDir="d:\bea\wlserver6.1"
InstallTime="Aug 3, 2001 2:50:19 PM" InstallSet="ServerExample" ServicePackLevel="1">
     <component name="Program" />
     <component name="Samples" />
     <component name="ServicePack_1" />
</release>
</product>
</host>
</bea-product-information>

Need to install oracle10g in windows7 using silent mode

Dear All,
I need to install oracle10g in windows7 using silent mode.Please provide steps to install in windows.
Thank you in advance,
Regards,
DB.

The only version of "10g" certified on Win 7 Professional or higher (Home versions are not supported) is 10.2.0.5
http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
10.2.0.5 is only available from My Oracle Support (https://support.oracle.com), access to which requires a paid support contract with Oracle.
Silent install process is documented - http://docs.oracle.com/cd/B19306_01/install.102/b14316/advance.htm
HTH
Srini

Creation of Weblogic Domain in console mode not working

Hi All,
I've installed the Middleware home with ADF Runtime installer (Installer was 12.1.2.0.0). Now, I'm trying to create and configure a domain based on the JRF Template. I'm executing the following command from Putty
Step1. Navigate to MW_HOME/wlserver/common/bin
Step2. execute "./config.sh -mode=console"
Its throwing the following error :
2014-07-21 17:03:41,643 WARNING [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Duplicate action cause encountered: java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
2014-07-21 17:03:41,643 SEVERE [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Wizard error cause
java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:207)
at java.awt.Frame.<init>(Frame.java:420)
at java.awt.Frame.<init>(Frame.java:385)
at javax.swing.SwingUtilities$SharedOwnerFrame.<init>(SwingUtilities.java:1757)
at javax.swing.SwingUtilities.getSharedOwnerFrame(SwingUtilities.java:1832)
at javax.swing.JOptionPane.getRootFrame(JOptionPane.java:1697)
at javax.swing.JOptionPane.showOptionDialog(JOptionPane.java:863)
at javax.swing.JOptionPane.showConfirmDialog(JOptionPane.java:796)
at javax.swing.JOptionPane.showConfirmDialog(JOptionPane.java:758)
at com.oracle.cie.wizard.internal.cont.GUIContext.handleFatalErrorMessage(GUIContext.java:1141)
at com.oracle.cie.wizard.internal.cont.GUITaskContainer$MethodRunner.run(GUITaskContainer.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:302)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)
at java.awt.EventQueue.access$200(EventQueue.java:103)
at java.awt.EventQueue$3.run(EventQueue.java:694)
at java.awt.EventQueue$3.run(EventQueue.java:692)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)
2014-07-21 17:03:41,643 WARNING [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Given state 'ERROR' does not follow current 'ERROR'
This vaguely means that its trying to open a GUI wizard, which is not what I intended to do. The argument -mode=console should run the installer in console mode, but its trying to launch it in GUI mode.
I searched online, but I have not found anything useful on this issue yet.
Am I missing something? Has anyone faced this problem before.
Any thoughts on this would be helpful !!
Thanks,
Shiva Shankar B N

Weblogic 12C (12.1.2 to be precise), currently does not support console mode Domain creation. It supports only GUI mode and Silent mode.
Possible solution to create a 12.1.2 Weblogic domain fully qualified enough to deploy ADF Applications :
1. Install Xming, and enable X11 forwarding on Putty
2. Silent Mode installation: The Configuration wizard. ./config.sh -mode=silent -silent_script=xyz . Yes, it needs a silent script, not silent.xml. I did not try this way and instead resorted to WLST. Still there are not enough blogs that clearly tell you how to install domain based on JRF template. I stumbled upon a similar OTN forum post.
Here is the bunch of WLST commands if anyone is interested
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
# Create and configure a JDBC Data Source, and sets the JDBC user. Provide the Schema Credentials of the Service table
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:1521/xe.yourdomain.com')
set('PasswordEncrypted', 'schemaPassword')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('DEV_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/your_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
Hoping to write a blog post soon..
Thanks,
Shiva Shankar B N

I have to use Safe Mode to make changes to Options since updating to 4.0.1

Since installing 4.0.1 from 3.7.16 I have noticed all the Options check marks are missing and the only way it seems to change the settings in Options is to use Safe Mode where the check marks become visible. The same thing is occurring with the preferences of some of the add-ons as well. I would guess some kind of Config. problem. Some feedback to address this issue would be greatly appreciated. Although version 4 is faster I'm already missing the older version that worked with no major bugs and am seriously considering either installing the older version or changing browsers.

I am indeed using a custom theme. Classic Compact 4.0.8 to be exact but that wasn't the cause of the anomalous behavior. I was also using an add-on for Classic Compact called Classic Compact Options 4.0.8. After disabling this add-on the check-marks did appear where their suppose to. So that is where the bug came from. By the way my OS is: Windows 7 Ultimate 64bit SP1. I also have the the same set up on a Windows XP Professional 32bit SP3 machine and do not encounter the same behavior. So the problem lies with Windows 7 and/or a 64bit operating system. I'm a newbee to this forum. Is there a way to notify the developer of this add-on about this bug? He really should be made aware of it.

Weird siebel 8.0 console mode installation problem on OEL 4

Hi There,
When I tried to install Siebel 8.0 SIA build on Oracle Enterprise Linux (OEL 4), I encountered a weird problem. It is a sandbox for QA to do testing, everything is on the same machine: oracle database 10.2.0.3, gateway, siebel server and SWSE. I installed oracle database, and make sure the database connection is fine, then I did the following :
1) run install by command "./setuplinux -is:javaconsole -console", it compeleted fine.
2) go to gateway directory, source cfgenv.sh
3) run "ssincfgw -is:javaconsole -console" to do gateway server, enterprise and SWSE logical profile configuration. Gateway configuration is fine, gateway started up successfully. But during enterprise configuration, it throws out a bunch of error messages like :
Error creating Parameter:MaxEntrTasks for Comp:TxnProc in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:MaxEntrTasks for Comp:RepAgent in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Component:MsgBroadcastMgr in CompGroup:CommMgmt
Strict Flag set to FALSE, continuing with the next Object...
SBL-ADM-02071: Enterprise server siebel not found in gateway server
But at the end, it still shows "Execution Successful!"
The SWSE logical profile configuration went through fine
4) go to siebel server directory and source cfgenv.sh
5) launch the ssincfgw in siebsrvr/bin directory to config siebel server, it also throws a bunch of error messages like:
Error creating Parameter:AllowAnonUsers for Comp:SMObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eMarketObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eEventsObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
But again, at the end it still shows "Execution Successful!".
6) go to siebsrvr directory, source siebenv.sh
7) Launch srvrmgr in command line mode:
srvrmgr /g $GATEWAY /e $SIEBEL_ENTERPRISE /u $USERNAME /p $PASSWD
and it shows "connected to 0 server"
In the SiebSrvr.log file, it shows " SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used."
In the sw_cfg_util.log file, it shows "SBL-SVR-03005: No server connect string for Siebel Component servermgr in Siebel Enterprise siebel, Siebel Server sdc60002sems".
The weirdest part is, if I clean up and uninstall everything, run the install and configure in GUI mode, give the same parameters, I don't get any error messages and siebel server can be up and running fine.
I searched the forum and found people have reported the same error message during enterprise configuration, but says it does not affect them from bring up the siebel server. Since I'm developing an automation to do the installation, I cannot use GUI mode to install. I have to make the command line console mode work and then record the response file for silent install. Does anyone know what might cause my siebel server fail to be up and running ? Thanks a lot for any suggestions and helps.

hi,
Make sure that your network uses DNS naming.
This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
regards,
saravanan

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Console font size in console mode Arch x86_64

hi
i do fresh install Archlinux 2013 x86_64. so i see some change btwin that and 2011, any way , everythings work OK, fast (KDE) but sometime i need work in console mode (ctrl+alt+f1) but i cant change resolution of console font, because now is settingsome basic and so big. i have nvidia card and drivers. i try read ths https://wiki.archlinux.org/index.php/Uvesafb but i cant find some solutions how setting everything with grub2 etc. in my old laptop i have arch 2011 and grub1 but everything work OK include console font, that was much better to setting, in that arch i cant find any working solution, so please help me if somebody know about this.
thanks
Last edited by H20 (2013-03-01 20:44:07)

[ 15.458823] NVRM: Your system is not currently configured to drive a VGA console
[ 15.458830] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.458834] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.458838] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.458841] NVRM: corruption and stability problems, and is not supported.
I suspect that it's still the case. You may even have this message in your own dmesg.
Switch console to VGA mode and use xterm instead.
This has nothing to do with resolution setting in a framebuffer, which is what the title of the thread suggests.
I'm pretty sure it does - it looks like the console is being switched to VGA text mode; nvidia has no reason to touch fonts.
Last edited by mich41 (2013-03-01 21:40:35)

Domain configuration fails in console mode

Hi everybody,
I've got a problem trying to configure a domain based on Portal Template.
If I use the wizard all works fine but if I try to use the custom mode I get a Security Configuration error.
It happens but I didn't change any security parametrs, I'd not added users or groups, I didn't enter in security session.
Did anyone get the same problem?
My system is a Solaris (I get the error with both 9 and 8 version) on Sun Spark and Weblogic Platform 8.1
Thanks a lot
Massimiliano

Hi,
There is no console mode in WebLogic 12.1.2. It has been remove.
See MOS note: "WebLogic Server 12.1.2 Generic Install Jar File Fails To Recognize Console Install Mode (Doc ID 1577869.1)"
Regards Peter

Seriously missing WL install using console mode ...

Similar Messages

Maybe you are looking for