Seriously need help with SB

My computer got back from being upgraded from ME to XP. I plugged in my speakers (Boston) and installed Sound Blaster Li've! Value. After installation, I restarted, and the sound worked then. I tried logging on AOL, and the sound doesn't come up for the dialing. I then checked the Creative programs. My status?
Creative Playcenter-Opens, and in a split second, closes out.
Creative Recorder-Comes up with an error and closes. The error: "Recorder could not find the necessary hardware or drivers to execute properly. Make sure your hardware and drivers are set up correctly
SBL! Experience-Has sound
My grandpa told me that he found some sound on a joke he read. I don't understand this. Please help me. This is the informatiom on the subject
-Creative programs are messed up
-Sound doesn't work (even on shutting down now)
-Sound only worked twice, but work on Experience now
I really need help, since if I don't fix it, I'd either have to buy a new computer, or spend tons of money upgrading my old, dusty windows 98.

Dwark,
Sounds like you need to uninstall all Creative Drivers and Programs/Utilities. Then download the uni-pack drivers from the Creative Support Downloads. The problems you are describing sound like the result of either outdated or mismatched drivers. You can not mix the old programs/utilities with the new uni-driver. You can kiss your Creative Recorder good-bye as Creative Labs has not seen fit to provide a new download for this app, only an upgrade, which is useless with the uni-pack. Also, don't be surprised if your Sound Blaster crackles and pops a little sometimes. This happened to me when I upgraded from Windows 98 to XP. It can be 'solved' by disabling sound hardware acceleration for whatever games/apps in which this problem occurs. There are patches for this problem if you have an VIA chipset motherboard(AMD processor). My advice? Since Creative has not seen fit to fix their SB Li've drivers under Windows XP, I will never buy another Creative product ever again. They suck.
Mr.Peanut
Message Edited by MrPeanut on <SPAN class=date_text>04-20-2005 <SPAN class=time_text>06:3 PM
Message Edited by MrPeanut on 04-20-2005 06:24 PM

Similar Messages

Seriously Need Help With Lightbox Widget In Dreamweaver

Hi guys, I seriously need your help with this widget.
I'm not exactly new to Dreamweaver and I've been working on a particular website. Everything was going well until I dropped the Lightbox widget into the page.
Lightbox gallery displays, but opens images in a new window on its own. Here's an example;
http://imagesbylady.co.nz/photomike/HTML/promogallery.html
Yet, when I drop the widget into a completely separate page from the website, it works absolutely fine. Like here;
http://imagesbylady.co.nz/photomike/HTML/testing.html
I have exhausted this entire forum on the subject. I don't understand how the widget can work on a blank html page but when dropped into an already designed webpage, it breaks....!
If you need to have a look at the coding so you can help me further let me know. I've been on this for a total of 11 hours and I still can't figure out what the problem is. Seriously....i'm nearly close to tears! ;-(
If you could help me out I would be forever grateful.
Lots of Love
Lady xx

Hi guys, I seriously need your help with this widget.
I'm not exactly new to Dreamweaver and I've been working on a particular website. Everything was going well until I dropped the Lightbox widget into the page.
Lightbox gallery displays, but opens images in a new window on its own. Here's an example;
http://imagesbylady.co.nz/photomike/HTML/promogallery.html
Yet, when I drop the widget into a completely separate page from the website, it works absolutely fine. Like here;
http://imagesbylady.co.nz/photomike/HTML/testing.html
I have exhausted this entire forum on the subject. I don't understand how the widget can work on a blank html page but when dropped into an already designed webpage, it breaks....!
If you need to have a look at the coding so you can help me further let me know. I've been on this for a total of 11 hours and I still can't figure out what the problem is. Seriously....i'm nearly close to tears! ;-(
If you could help me out I would be forever grateful.
Lots of Love
Lady xx

Seriously need help with speech recognition!!!!Please!!!!!

Hi all
I am developing an email client as my final year project using speech synthesis and recognition.
the synthesis part is working fine but i just cannot get the speech recognition done!!!
i want the application to print what i say to textfields and also to activate buttons using voice.i have been really trying.am using Cloudgarden and it does not give examples of direct dictation to text fields.
would really appreciate and tips or code from anyone!!!
have only a wek left to do this!!!

Hai i am also trying to use sphinx4 as given in the example. when i compiled the example it didn't show any problem . I created the jar file. The jar when it is executed is showing exception IOEXCEPTION File not found no entry for gram file. Is their any thing i need to do specially for that .gram file.

Seriously need help with setting up mail on macbook pro

Please,
someone advise me on how to put my gmail and my workmail accounts into one mail application and organize it. I have been trying to figure it out all day and my head is about to explode. Somehow i managed to pull all the emails from both accounts into the application but it is all a huge mess and is not working as it should.

If your using POP, take a look at this link:
http://mail.google.com/support/bin/answer.py?hl=en&answer=13275
If your using IMAP, take a look at this link:
http://mail.google.com/support/bin/answer.py?hl=en&answer=81379

Need help with effect!

I need help with the following:
I am currently making a Harry Potter short film and I'm doing a spell that hits my friend and my friend needs to be blown backwards (if you know what I mean, he needs to like kinda fly backwards because of the force from the spell).
Can you in anyway help me with this or give me an idea on how to proceed?
I've been thinking of setting a green screen up where the person jumps backwards on a mattress or similar.
Thank you so much, I really hope you can help me.
I have been searching the web for a long long time and didn't find any answer.
Contact:
Reply here
Skype: asgerrockz

Be careful here. Someone yanking on another person rigged with a professional harness can suffer permanent spinal injury. I have a home and a family and I wouldn't attempt even a simple version of this kind of stunt without a rider on my liability policy, a professional and therefore bondable stunt coordinator, and a trained stunt person. No offence Todd but I'd never yank someone backward by a wire or cord attached to their torso.
You can do this very gently by having the actor just throw out their arms and jump backwards a bit then do the majority of the move in AE. Having the camera on a simple slider would also help. As the actor jumps back dolly the camera back on a slider.
I've been shooting and producing films for more than 40 years when not one injury on the set except for me. Fractured my L2 and L3 vertebrae on a fall with a SetadyCam in 1975 because we didn't do a thorough enough safety briefing. Don't just try and do something you think you have seen on YouTube without some serious planning. There's no need for anyone to get hurt on a set.

Seriously need help but cant get through via phone

I am seriously needing help spend almost all week chatting with verizon via my verizon however nobody could come up with an answer for my problem it seems that I have been locked out of using the online payment option and the lady says it does not show that on her end I need this addressed asap but the lines have been down for days according to the store I just spoke with. is there someone in finance or billing that could call me? I have several things I am trying to do 1. add an account manager 2. make a payment arrangement for a week out ( I normally do this as my payday falls odd) 3. gain access to online payments

Take each of the following steps that you haven't already tried. If the problem isn't solved, ask for further instructions.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Disable any third-party firewall, "security" software, or network filter.
3. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
4. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.

HT201318 Need help with being double charged on my icloud account when purchasing extra storage for my ipad

Need help with being double charged on my icloud account when purchasing extra storage for my ipad?

I had this same problem on my 4S. I fixed it by restoring the phone to factory defaults. Previously, I had taken the additional step of restoring from backup but, as soon as I did, the problem returned. The fix is a hassle as I now have to reinstall my apps but at least I can manage mail on the phone.
The problem also occurred on my iPad2 but I'm not restoring it as it's a serious hassle (see above) and I don't actually read much mail on the device.
As a side note, I noticed incredibly high load averages (5+ processes for 1, 5, and 15 minutes; 12+ for 1 and 5 minutes at one point) as well as CPU usage that didn't drop below 15% (apparently all user processes, system seemed to be about normal). As could be expected, this also lead to incredibly rapid battery depletion.
I can't tell what processes were hogging the CPU as neither of my devices are jailbroken and Apple doesn't seem to like 'top' much.

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

I need help with shooting in my flash game for University

Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
    //declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
    minesInGame = 15;
    //create a timer fires every second
    mineMaker = new Timer(6000, minesInGame);
    //tell timer to listen for Timer event
    mineMaker.addEventListener(TimerEvent.TIMER, createMine);
    //start the timer
    mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
    evt.target.x -= Math.random()*5;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseMine();
    //declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
    atmInGame = 15;
    //create a timer fires every second
    atmMaker = new Timer(8000, minesInGame);
    //tell timer to listen for Timer event
    atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
    //start the timer
    atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
    evt.target.x -= Math.random()*10;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
    bg_mc.x -=10;
function moveBackward():void{
    bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
    //makes the tank move by 10 pixels right
    if (evt.keyCode==Keyboard.D)
    tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(tankMine_mc);
    //var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
    //Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
    cTime ++;
} else {
    //if it has, then allow the user to shoot
    shootAllow = true;
    //and reset cTime
    cTime = 0;
function updateHealthBar():void
    percentHP = currentHP / maxHP;
    healthBar.barColor.scaleX = percentHP;
    if(currentHP <= 0)
        currentHP = 0;
        trace("Game Over");
    updateHealthBar();

USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key

Need help with conditional query

guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
    "FGL_GRNT_CODE" VARCHAR2(60),
    "FGL_FUND_CODE" VARCHAR2(60),
    "FGL_ACCT_CODE" VARCHAR2(60),
    "FGL_ORGN_CODE" VARCHAR2(60),
    "FGL_PROG_CODE" VARCHAR2(60),
    "FGL_GRNT_YEAR" VARCHAR2(60),
    "FGL_PERIOD"    VARCHAR2(60),
    "FGL_BUDGET"    VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH     got_greatest_year     AS
     SELECT     fgl.*     -- or whatever columns are needed
     ,     MAX ( CASE
                 WHEN fgl_period = :given_period
                 THEN fgl_grnt_year
                END
              ) OVER ()     AS greatest_year
     FROM     fgl
SELECT     SUM (fgl_budget)     AS total_budget     -- or SELECT *
FROM     got_greatest_year
WHERE     (     fgl_grnt_year     = greatest_year
     AND     fgl_period     = :given_period
OR     (     fgl_grnt_year     = greatest_year - 1
     AND     fgl_period     = 14
;Miguel

Hi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH     got_greatest_year     AS
     SELECT       TO_NUMBER (fgl_grnt_year)     AS grnt_year
     ,       fgl_period
     ,       TO_NUMBER (fgl_budget)     AS budget
     ,       MAX ( CASE
                   WHEN fgl_period = :given_period
                   THEN TO_NUMBER (fgl_grnt_year)
                  END
                ) OVER ()     AS greatest_year
     FROM       fgl
,     got_cnt_00     AS
     SELECT     grnt_year
     ,     fgl_period
     ,     budget
     ,     greatest_year
     ,     COUNT ( CASE
                   WHEN grnt_year     = greatest_year
                   AND       fgl_period     = '00'
                   THEN 1
                     END
                ) OVER ()          AS cnt_00
     FROM    got_greatest_year
SELECT       SUM ( CASE
                    WHEN grnt_year     = greatest_year                    -- New
              AND       fgl_period     = :given_period                    -- New
              AND       cnt_00     > 0            THEN budget * 2     -- New
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = :given_period       THEN budget
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = '00'            THEN -budget
                    WHEN grnt_year     = greatest_year - 1
              AND       fgl_period     = '14'
              AND       cnt_00     = 0            THEN budget
                END
           )          AS total_budget
FROM       got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New".

Seriously need help with SB

Similar Messages

Maybe you are looking for