Seriously. Slow down the credits help!

I've read a ton of your answers to this question in the archives, and still have yet to solve the problem. I understand how to make the credits roll slower, I understand you have to extend both the background and the text. The problem is that when I extend both to about 20 seconds, the credits are finally rolling at a pace I am happy with, but the text is finished by 9 seconds and I have 11 seconds of black background! Which I do not want for obvious reasons. When I tried to only get rid of the black background, everything changed to a 10 seconds frame and the text was back to scrolling far too quickly for anyone to read. This problem needs to be fixed. As I don't think it is anything I am doing wrong, the whole feature itself is messed up.

haltiamava wrote:
....  As I don't think it is anything I am doing wrong, ...
hmmm ... :
2 lines of text in 20sec = slow
20 lines of text in 20 sec = not so slow
2 lines of text in 5secs = fast
2 lines of text in 50sec = way too slow
What I want to tell you here:
the 'speed' depends on LENGTH in min:sec of clip AND of amount of lines ... -
if you have many lines of text, make the clip longer = slower.
you can NOT expect to scroll an amount of text 'slow' within 3secs, that's nonsense.
remember school:
speed = distance (here; amount of text) x time (here: 'length' of clip) .. .
and a credit-title starts and ends with 'emptyness'.- or, you overlay it over some video ... -

Similar Messages

  • In iMovie '11 how do I slow down my credits at the end of my movie.  I typed them in, but the speed is too fast.

    I have iMovie '11, and I can't find how to slow down the "credits" I've typed in at the end of my movie.  I guess
    it would be the scrolling speed.

    Credits scroll at the speed that is necessary for the scrolling to complete by the end of the clip.  So, to slow them down, simply prolong the duration of the scrolling credits title clip by selecting and draggging out the yellow boundary.
    Geoff.

  • How can I slow down the playback speed of selected parts of a captivate video?

    Hi everybody,
    I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
    I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
    The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
    Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
    Thanks!

    Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
    I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
    In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
    Much appreciated.
    Paul

  • Messages are in to be delivered state and slows down the message processing

    Hello,
    Messages are in to be delivered state and slows down the message processing.
    this happenens in case of DB2 on some machine where the issue about high load on DB2  is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original  SQL statement configured in the channel configuration,
    Can you please help me out in solving this issue?
    Thanks,
    Soorya

    Status: TO_BE_DELIVERED
    Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
    TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
    Solution:
    This is done via the Messaging System receive servlet:
    http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
    /<PROTOCOL>
    Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
    1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
    to see if they are blocked
    2. We can check the messages:
    AdapterFramework
    com.sap.aii.adapterframework.serviceuser.language
    com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
    com.sap.aii.adapterframework.serviceuser.pwd
    ApplicationSystem
    com.sap.aii.applicationsystem.serviceuser.language
    com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
    com.sap.aii.applicationsystem.serviceuser.pwd
    in the exchange profile to make sure the right passwords

  • Norton anti-virus slows down the start up time in Windows Vista

    Hi,
    please help, i am being driven to distraction by the slow start up time of my laptop.
    I've only had it for a few weeks and don't use it for anything beyond producing word documents etc.
    It has gradually been getting slower on startup and i suspect it has something to do with the Norton anti-virus software on it and the updates for norton that i have downloaded (thinking that this was the right thing to do).
    Looking at the problems and solutions log on the computer the date that it really started to slow down coincides with downloading a norton update, which i have been unable to uninstall to check if this really is the problem.
    Further i have tried doing a System Restore, my laptop was not able to complete.
    I am stuck on the DOS screen for 10 mins with the message:
    PXE-E32 FTFP open timeout
    I have no idea what this means but the Problems and Solutions log says something about a system hang?
    I have looked on the web for other anti-virus software and they all seem to have one problem or another and slow computers down on startup.
    Does anyone know of a solution or do i just have to make a cup of tea when i switch my computer on and lace it with vodka till it has booted up completely!
    I am a novice when it comes to using computers so would welcome any non-technical advice.
    thanks
    laura

    Hi guys
    I would like to add some words about my experience using the Symantec Norton Antivirus software.
    I have used this software 3 year long. It was great because it supports one of the best virus filtering options BUT it really slow downs the operating system.
    I didnt use it on with Vista preinstalled notebook but on Win XP and I have to say that the notebook boot process was halted for about 30sec-1min till the whole parts of Norton Antivirus software has started It was very annoying
    However, I switched to AntiVir. This is software described by marina4000 and Im really happy because the boot performance increased.
    So finally I would also recommend removing this Symantec Norton Antivirus software and to switch to the other free AntiVir software ;)
    Bye

  • Outlook 2010 - User tends to open many emails at a go but this may slow down the machine.

    Hi,
    My user tends to have this work habit of opening 8-10 emails at one go. She view this way of working as more efficient and faster. But this means that if outlook crashed, all the emails will be close as well, and this way of working tends to slow down the
    machine.
    Is there any way Outlook can users to open multiple emails without hording CPU page milage?
    Thank you.

    Hi Josh,
    Slow Outlook can be also harmful for your database and there are numbers of factor which slow down the MS-Outlook like:
    * Third Party Plug-ins
    * Slow internet connection
    * Antivirus/ Firewall Programs
    * Corruption or Error within Outlook
    So always try to open Microsoft Outlook in safe mode whenever you stuck in such problems. 
    How to optimize Outlook performance:
    * By Disabling add-ins
    * Check default account settings
    * Disabling Scanning programs
    * Scanpst.exe (Inbox Repair Tool)
    For more brief about Outlook disturbance and solutions:
    http://support.microsoft.com/kb/813514
    Note: Improve community discussions by marking the answers helpful.
    Thanks
    Clark Kent

  • Satellite Pro A10 - Does SP2 or 3 slow down the XP performance?

    Hi,
    I have a Satellite Pro A10 PSA15E which over the years had become very slow.
    Recently I upgraded it's RAM from 256 to the maximum 1gb to try to speed things up but it did not help.
    Next I reformatted the hard disc and reloaded the system using the Toshiba recovery disks. This worked fine and the system performance was excellent. However, with on-line security in mind, I loaded Windows SP2 ( with a view to subsequently go to SP3) and this has taken the system back to where I started - very, very slow, in fact pretty well unusable.
    Does anyone know if Toshiba support SP2 and SP3 on this model of laptop?
    If so how do you install them without killing performance?
    Thanks in advance.

    Hi!
    I think SP2 or SP3 is supported on this Toshiba notebook because both Service Packs are contains really important security updates and I think this is not the problem.
    If you install SP2 or SP3 you will also get the Security center and better Windows firewall. Maybe you should disable both services because the slow down the system performance (I always disable both services).
    Just go to start => run => services.msc and disable both services and set the start up type to disabled.
    Bye

  • HT203164 When I try to burn a cd, I get the following message  "The attempt to burn a disc failed.  An unknown error occurred (4450).  I slowed down the speed to as low as 4x and I get the same message.

    Anybody have this issue?  Everytime I try to burn a disc, I get the following message " The attempt to burn a cd failed.  An unknown error has occurred 4450."  I tried slowing down the burn speed to as little as 4x.  Please help!

    Hello rcrown01,
    The following articles can help get iTunes back to burning.
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Cheers,
    Allen

  • How can I stop the loading of "Getting Started with Mozilla Firefox?", which has greatly slowed down the startup of Firefox.

    Firefox used to start up fairly quickly, but now it loads an additional more complicated tab, which has greatly slowed down the start up process. How can I eliminate the loading of this time waster?

    See these articles for some suggestions:
    *https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved
    Use this to go to the Firefox Profile Folder
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Slowing down the pictures on the DVD menu

    I am using one of the 6.0 themes, the black reflection one. For the DVD menu, you can drop up to 8 or so photos. These photos then flow sideways across the screen repeatedly. My thing is, I think they flow to fast. Like it is hard to focus on them because they are moving so fast. Is there a way to control the speed of this?

    Hello Gobigredfan,
    guessing here...
    you should be able to extend the duration of the menu by dropping different audio into the menu. check in the settings tab to see how long your menu is.
    Example: if it's 30 sec choose a 60 sec audio clip and replace the original music with that. as your menu becomes longer, it should slow down.
    hope this helps
    mish

  • Possible to slow down the drives?

    On windows you can use a utility called "Drivespeed" to slow down the drive and make it silent.
    Its annoying when Im watching a DivX burnt on a CD/DVD and it makes so much noise when its reading.
    Is there any way to do this on a Mac?

    First of all, this problem can only be associated to a broken instrument. The instrument itself controls how fast data is sent to it on the bus. That is the primary purpose of the interlocked 3-wire handshake.
    If the device is unable to accept any more data (buffer-full), it can assert the NRFD line to indicate it is not ready for data. In fact, it is only allowed to deassert NRFD when it is actually ready for data.
    For command transfers, the device is only supposed to deassert NDAC after it has accepted and processed the command byte on the bus.
    If this device (or any other) is deasserting NRFD when it is not ready or NDAC when it has not processed a byte it is broken.
    One other option available to help communicate to a b
    roken instrument is to increase the cable lenght. This adds propegation delays that can sometimes "fix" a broken instrument. I have personally seen an 8-meter cable fix a similar problem. (The device got fancy and deasserted NRFD before it was ready, anticipating that the controller would take a "long" time to change the DIO lines. With new controllers and computers, the DIO lines were changed before the device latched the data, confusing the device.
    Hope this helps...

  • Can i slow down the music speed?

    how do i slow down the song speed while im listening to it, please help. =D

    What I usually do is set a marker for every beat. Then I can go back and edit my clips to the markers, and it syncs up with the music. Course it might be kind of hard to set 15 markers in one second...
    On the other hand, Capt. Mench's technique is definitely a good one. A fantastic one, actually. Markers would just be another method of doing it.
    (On a side note, that video is awesome, Captain. Especially using the brackets to trim. I never knew about that. Thanks for the tip, and thanks for posting it, David.)
    Good luck, B, and hope one of these methods works for you.
    jesse.

  • I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

    I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

    The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
    For details see the store's web page on the Dual-Link display adapter.

  • I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly.  All I see is that whirling circle every time I do anything.  How do I go back to old OS.  Terrible upgrade -- forces you to buy a new Mac!!!!

    I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly.  All I see every time I do anything is that crazy circle going round and round.  I don't recommend you upgrading.  How do I get rid of it.  I believe it forces you to buy a new macbook!!!!

    It does not. First things first have you tried restarting?
    Try restting PRAM
    http://support.apple.com/kb/HT1379
    Try booting up in Safe Mode
    http://support.apple.com/kb/HT1455
    Also open "activity monitor" and look and see what is using a lot of processing power.

  • How can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

    how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

    try this;
    open disk utility - verify disk permissions - repair disk permissions if errors are found.  might take an hour or less - depending on how much errors needs to be repaired.
    restart your macbook and see if that sorts it out for you.
    also check your hard drive space.  if your hard drive is almost full, that will also contribute to your macbook getting slower....
    good luck

Maybe you are looking for

  • How to use  two monitors with my Mac mini

    Hello, I have a Mac mini and using a 20" Samsung Monitor with it which works well. I also have my 40" LCD Samsung telly, set up next to it. Whenever i watch a DVD using my Mac i have to swap over the cables. Is there a way of getting the right cables

  • Restricting Re-ATP while copying from Quotation to sales order

    How to restrict availability chek in R/3 ? Our scenario is :- If SO is created in reference to quotation for A rank customer then availability check Should not happen . Although If SO is created in reference to quotation for B/C rank customer then av

  • Flash 9 Does Not Work- Tried EVERYTHING

    I tried everything from uninstalling, using the standalone, deleting registry keys, using the ocx files, EVERYTHING. I'm tired of "This is the answer" posts on internet, which did not work for me, even though I follow the direction word-for-word. Any

  • Onchange attribute of h:inputText/ not rendered  in JSF 1.2.08 and above

    Hi! I am using Glassfish v2ur2, which is shipped with JSF 1.2.04. I have upgraded to 1.2.08 performing the steps in the release notes - basically overwriting GLASSFISH_HOME/lib/jsf-impl.jar and adding jsf-api.jar at the same location. It works, but I

  • Web form integration in CRM

    Hi All,           Can i request for any infomraion on web form integration with CRM? Kind Regards.