Servcie Tax registration Number

HI Friends,
We have following scenario while implementaion.Two Location
1.Dehli - Production + Service provider.having seperate service Tax registration number.
2.Mumbai - Only Service Provider Having seperation Servcie tax regi. Number.
Our issue is whether we have to define these 2 location as seperate plant or we have to define 1 Plant for these 2 location.?
Regards,
Chetan

Dear Chetan
Since no manufacturing activity is involved in Mumbai location, you can consider it as Sales Depot and Delhi as a plant.
thanks
G. Lakshmipathi

Similar Messages

  • Service Tax Registration Number

    hi all,
    Where can i incorporate the Vendor's Service Tax Registration number in the Vendor Master. I am working in CIN - Country India Version.
    I can see a column in the table J_1IMOVEND, Service tax regn. no. How does it get populated.
    thnx
    regards
    prasanna

    Hi Prasanna,
    You can maintain excise master data in Tcode: J1ID. Just select 'Vendor Excise Details' and click on 'change' icon. Then click on new entries, here you can maintain master data related to vendor, in this the last field is the service tax regn. Whatever the data you will maintain here for vendor will get defaulted in vendor master 'CIN Tab'.
    If you couldn't able to input in vendor master CIN tab it may be due to authorizations or screen layout.
    Hope this helps and clarifies.
    Thanks,
    Viswanath

  • Works Contract Tax Registration Number In vendor master

    IN SAP where we can  Mantain Works Contract Tax Registration Number In vendor master?

    HI,
    WCT-TDS:could calculate and post the
    WCT using the EWT in 46B onwards but the reports /returns
    are not supported in CIN. You have to develop your own reports /return
    formats for WCT.
    Reg
    Madhu M

  • Service Tax Registration Number field not found in FD01 under CIN Details

    Hi Experts,
    I am using R3 - ECC5
    T Code - FK01 / FK02 / FK03.
    Can you guys tell me
    1. I am not able to view the field "Service Tax Registration Number" under the "Sales Tax Tab" in customer master. Can you tell me how to populate the "Service Tax registration number" field under - Customer Master - Additional details - CIN Details - SalesTax.
    2. Also in one System the above Tab name is "Sales Tax/Service Tax" where I am able to also view the "Service Tax Registration Number" field. But in the R3 System where I am not able to view the "Service Tax Registration Number" Field the Tab name is just "Sales Tax". Can you tell me how to change this Tab Name to "Sales Tax / Service Tax".
    Rgds
    Prasad

    Hi Experts,
    I am using R3 - ECC5
    T Code - FK01 / FK02 / FK03.
    Can you guys tell me
    1. I am not able to view the field "Service Tax Registration Number" under the "Sales Tax Tab" in customer master. Can you tell me how to populate the "Service Tax registration number" field under - Customer Master - Additional details - CIN Details - SalesTax.
    2. Also in one System the above Tab name is "Sales Tax/Service Tax" where I am able to also view the "Service Tax Registration Number" field. But in the R3 System where I am not able to view the "Service Tax Registration Number" Field the Tab name is just "Sales Tax". Can you tell me how to change this Tab Name to "Sales Tax / Service Tax".
    Hi Problem has not been resolved. Can anyone give some solution.
    Rgds
    Prasad

  • Service Tax Registration Number field not found in FK01 under CIN TAB

    Hi Experts,
    I am not able to find the Service Tax Registration Number field in Vendor Master (FK01/ FK02 / FK03) under CIN Details Tab - under Sales Tax Tab.
    We are using ECC5. Also we have checked in another ECC 5 system where we are getting the Service Tax Registration Number field in Vendor Master - under CIN Details Tab - under Sales Tax/Service Tax Tab.
    Can you please tell me:
    1. How to populate this "Service Tax Registration Number" Tab in Vendor Master. We want to add the Service Tax Regn Number, of all our Vendors, in the Master.
    2. Also can you tell me why in, "FK01 - under CIN Details Tab" in one system, the Tab Name is Sales Tax, while on another system the Tab Name is "Sales Tax/Serivce Tax". Is there any way by which the Tab Name in our system can be changed to "Sales Tax/Service Tax.
    Regards,
    Prasad

    Hi Experts,
    I am not able to find the Service Tax Registration Number field in Vendor Master (FK01/ FK02 / FK03) under CIN Details Tab - under Sales Tax Tab.
    We are using ECC5. Also we have checked in another ECC 5 system where we are getting the Service Tax Registration Number field in Vendor Master - under CIN Details Tab - under Sales Tax/Service Tax Tab.
    Can you please tell me:
    1. How to populate this "Service Tax Registration Number" Tab in Vendor Master. We want to add the Service Tax Regn Number, of all our Vendors, in the Master.
    2. Also can you tell me why in, "FK01 - under CIN Details Tab" in one system, the Tab Name is Sales Tax, while on another system the Tab Name is "Sales Tax/Serivce Tax". Is there any way by which the Tab Name in our system can be changed to "Sales Tax/Service Tax.
    My Problem has not been resolved. Can anyone give some solution.
    Regards,
    Prasad

  • Supplier Tax Registration Number

    In case any of the supplier changes the Tax Registration number, should we create a new supplier and merge it with the old supplier to transfer all the POs and Invoices
    or
    overwrite the Tax Registration number in the same supplier setup with the new one.
    What is correct process to do this and the market practice. Please help!
    Thanks!

    Assuming that you want to see the query which lies behind the self service form.
    First ensure personalisations are enabled.
    Navigate to the form in question and query back a suitable supplier.
    In the bottom left hand corner of the form there is a link 'About this Form' (If the link isn't there then personalisations are not switched on, so you'll need to go back to the first step and resolve that) - click on the link.
    Scroll down to the section 'Business Component Reference Detail' - expand that by clicking on the '+'.
    In the 'View Objects' section there should be a link 'oracle.apps.pos.supplier.server.VendorsVO' - click on that link and you will see the query which populated that section of the form. From that you should be able to figure out exactly which table and/or view provides the data and which column the data comes from. You may need to work through other links in that section to get everything you need.

  • Service Tax Registration Number for plants

    We are required to put service tax registration number  for plants in SAP 4.6C (CIN 40A)However, we are not able to find a place where to enter the service tax registration number for plant.
    Request your guidance
    Santosh k agarwal

    It is available in T code: J1ID itself - Excise Status - Excise Indicator for Plant.  We are also on same version.
    Regards.....
    Message was edited by: RATNAKAR NEMANI
    Message was edited by: RATNAKAR NEMANI

  • Multiple Tax Registration Numbers per Customer

    Hi,
    we have EBS 11i (11.5.10.2) and I am not a financial expert, but just struggling with some technical details of TAX implementation.
    The situation is that we have certain customers which have an office site in one European country, let's say France, and have a registered VAT number in France. But they have also a VAT number registered in another EU country, e.g. Germany. But Office location is still France, so there is only one address for our customer.
    However the customer entry form allows only to enter one TAX registration number per address, but we have two different numbers for that address.
    Question:
    Did anyone else face the same issue and how did you solve it or how would you solve it?
    I am not much in favor of entering two different addresses, because there are no 2 addresses. This would only confuse during Order Entry, if you will have to choose between two addresses that look similar...
    Actually I think the whole EU tax stuff is not implemented properly in that release... So would be great if some could share some knowledge/experience on that topic.
    Thanks,
    David.

    Hi John,
    as I mentioned, I am not an expert for the Tax laws and regulations. It has all to do with the EU VAT system and I think it's because you can get a registered VAT identification number in another member state than where your head-office is or ask a tax representative in another member state to handle tax...
    In fact we have an in-house expert for this topic, but we struggle with him how to implement the business cases in the system. I'll ask him to describe a very specific business case.
    Anyway, if there is anyone that has experience with EU Tax and how to deal with it in AR/AP than it would be great to share some experiences.
    regards,
    David.

  • Tax registration numbers

    hi experts
    can you tell me which table stores sales tax registration number and national tax registration number of application runnning company??
    regards
    anwer

    Hi,
    In 11i, it's defined in AR->Setup->System->System Options, folder Tax.
    Regards,
    Ketter Ohnes

  • Entering values in Tax Registration in Purrchasing from iSupplier portal?

    Hi All ,
    Iam entering Taxpayer ID ,Tax Registration Number and DUNS Number from iSupplier portal.
    These values are reflected in Purcashing- Suppliers(form)
    I am entering arabic text in Tax Registration field in iSupplier Portal.
    It is getting reflected in Suppliers form.
    My question is will it have any effect ?
    Thanks
    SY

    Hi All, got the solution for this.
    While debugging the procedure "FND_REGISTRATION_UTILS_PKG.publish_event" we found that it is calling a business event. We followed the below steps to resolve the issue:
    1)     For the business event “oracle.apps.fnd.umf.reg.user_approved” we need to disable existing seeded work flow subscription
    2)     Keep the internal name of workflow as same, modify the standard workflow by adding new custom process to it.
    3)     Create a new subscription under the business event to call custom process of work flow from it.
    4)     Create custom package of “POS_URL_PKG” and call this from the above created custom work flow process
    5)     Custom package “POS_URL_PKG” gets the Custom URL which needs to be send to user
    Regards,
    S.K.

  • Customers License Number... Tax Registration Num (TAX_REFERENCE)

    Hi there
    We have legacy License number which is equal to Customer number in legacy system, we used ORIG_SYSTEM_REFERENCE field as a license number in Oracle Receivable Customer form.
    What happened this field is not updateable and the some time user forget to type the number and than system generates the number automatically and we want to modify this field and the field is not updateable.
    CAN I use Tax Registration Num as a License Number? What is the Risk of using this field as a license number or Is there any other field I can use?
    Thanks in Advance.
    ASIM

    Hi!
    You're welcome! Yes, I meant DFF. I agree with you, if you use a dff, it will be quite difficult searching customers. You will have to open customer form, press F11, go to the flexfield and inform the number. Much harder than just using standard customer search form.
    If are not in one of the countries mentioned in AR manual, neither intend to have an operating unit based in one of that countries, I think you can use Tax Registration Num or Taxpayer Id, if you don’t have another use for them. Validation on Taxpayer Id is currently restricted to Italy, Spain and Portugal.
    Alternate Name field could also be used, but searching using this field is also harder than just using standard customer search form. And, if you are not using it, you have Account Name.
    I searched in AR users guide for references on "Reference" field, and according to the manual, it cannot be updated after customer is saved. I don't know if there is an API that allows updating this field.
    Regards,
    Ketter Ohnes

  • Wrong Vat registration number in S_ALR_87012357- Advance tax return

    Hi All,
    When we run the report S_ALR_87012357, the Vat registration number of the customer is appearing as wrong. It is picking up the Vat registration number of the company code, instead of the one maintained in the customer master data.
    Can somebody please help me with this?
    Regards,
    Abhishek

    The std SAP report does not have the VAT # - It looks somebody added the VAT info to the report. Please check the config under SPRO.
    Additionally, I think this comes from the Plant and NOT Co Cd.

  • GST registration number

    Hi,
    where does the GST registration number is maintained for the vendor?
    in vendor master i am able to see the field VAT.
    I guess VAT(valuea dded tax) and GST(goods and servcie tax) are different... am i right?
    this requirement is for non CIN(country version india)

    Hi Scott
    In the end it was quite simple but requires some particular authorisation...
    I went to SE16 and entered table T001I to see all the parameter entries available and then used the create option to add in a new Paramater Type...
    The main requirement to have this option for the SG company code is to enter the ISO code that is specified in the country settings (Table T005 or T/C OY01).
    Once this entry has been created in SE16 (not sure of the exact authorisation requirement - but speak to the technical team) you can then go to the additional details and see the new parameter...
    Hope this helps
    Regards
    Chris

  • Report GL Account Line Item with vendor name and VAT registration number

    Hi,
    Is there any standard SAP report/inquiry for GL Account Line Item like FBL3N, with information vendor name and VAT Registration Number (field STCEG) without using ABAP.
    Thanks.

    Hi,
    We can get purchase register through T.Code: 'J1I2' by specifying condition types and tax codes.
    We can't get 100% report from this T.Code.
    Check it once.
    Regards,
    Padmaja N.

  • Origin of Sales Tax ID Number in billing document

    Hi
    In the billing Header, Taxes, there is a field "Origin of Sales Tax ID Number". Can you pls. guide me what is the mean of this field and how the value for that particular field is detemined.
    with regards

    Hi Lin
    The field "Origin sls.tax no." actually indicates that from where the VAT registration no. in Billing Document is coming. If you check the F4 help of this field then you will find that there are different option like - from Ship to party, Payer or Sold to Party etc. The determination rule is maintained in customising at IMG> Sales and Distribution>Basic Functions -->Taxes -->Maintain Sales Tax Identification No. Determination.
    Hope this will clear your doubt.
    Regards
    Amitesh Anand

Maybe you are looking for