Server 08 R2 DC - unable to open ADUC, netlogon does not start

Hello everyone, and thank you in advance for any possible support.
Note:  All identifying server/domain names have been replaced with "CORP" "Sub" and "Sibling" where appropriate.  Our forest consists of 3 domains - two which are 'siblings' at the top, CORP and Sibling, (corp being
the primarily used one), and one which is a 'child' of Corp (Sub).
Today we identified that on one of my domain controllers (named for this post, CORP-DC6) we are unable to open ADUC. This is only one of our 8 DC's, and it does not hold any FSMO roles; the only two important pieces on this server is that it's where we manage
our OCS from (we use ADUC on this system to enable a user for OCS, create SIP addresses, etc) and that Certification Authority is installed on the system.
Attempting to open ADUC gives error "Naming information cannot be located because: The target principal name is incorrect."
Web searches for this prompted me to check DNS for issues.  In looking into DNS, I found that the system was somehow assigned a different IP address than it should have (it was now at 192.168.1.124 instead of 192.168.1.290 where it should have been).
 I moved the IP address back to the correct IP, and rebooted.  
The issue was still there, so I continued searching; which lead me to a suggestion to check out my netlogon service.  I found that the Netlogon service was NOT running.   When attempting to start the service, it fails and I am presented wih the
following error in the System event log:
Log Name: System
Source: Service Control Manager
Date: 7/24/2013 10:54:59 AM
Event ID: 7023
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Netlogon service terminated with the following error:
%%-1073741724
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7023</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.175664400Z" />
<EventRecordID>850085</EventRecordID>
<Correlation />
<Execution ProcessID="496" ThreadID="584" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.om</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Netlogon</Data>
<Data Name="param2">%%-1073741724</Data>
</EventData>
</Event>
Additionally, there is also this error:
Log Name: System
Source: NETLOGON
Date: 7/24/2013 10:54:59 AM
Event ID: 5602
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
An internal error occurred while accessing the computer's local or network security database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="NETLOGON" />
<EventID Qualifiers="0">5602</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.000000000Z" />
<EventRecordID>850083</EventRecordID>
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data>%%1317</Data>
<Binary>640000C0</Binary>
</EventData>
</Event>
At this point, I've read a bunch of stuff online and not really found anything that has helped nor seemed completely relevant.
Additional Info that may help out:
When I open Server Manager, it seems to think the local system's name is WIN-3OL3DIFK4S instead of CORP-DC6; similarly opening Device Manager from w/in Server manger gives a message about managing a remote system; even though I am managing the local system.
There are additional errors in the System and Application log which are certainly issues, but I do not know if they pertain to the main issue at hand here or not.
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 7/24/2013 10:55:04 AM
Event ID: 1055
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:04.448473700Z" />
<EventRecordID>850088</EventRecordID>
<Correlation ActivityID="{582C2637-5A99-47AE-B50C-C1A063DDABDC}" />
<Execution ProcessID="888" ThreadID="1056" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">11762</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied. </Data>
</EventData>
</Event>
Log Name: System
Source: LsaSrv
Date: 7/24/2013 10:55:13 AM
Event ID: 40961
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The Security System could not establish a secured connection with the server ldap/corp-dc1.corp.com/[email protected]. No authentication protocol was available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
<EventID>40961</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.262489200Z" />
<EventRecordID>850092</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1332" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Target">ldap/CORP-dc1.corp.com/[email protected]</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-DfsSvc
Date: 7/24/2013 10:55:24 AM
Event ID: 14548
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The DFS Namespace service could not initialize the trusted domain information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DfsSvc" Guid="{7DA4FE0E-FD42-4708-9AA5-89B77A224885}" EventSourceName="DfsSvc" />
<EventID Qualifiers="49152">14548</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:24.000000000Z" />
<EventRecordID>850102</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData Name="DfsNoTrustedDomainInfo">
<Binary>B5060000</Binary>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 7/24/2013 10:57:44 AM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/corp-dc1.corp.com. The target name used was cifs/corp-dc1.corp.com. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (CORP.COM) is different from the client domain (CORP.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
<EventID Qualifiers="16384">4</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:57:44.000000000Z" />
<EventRecordID>850163</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.CORP.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Server">host/corp-dc1.corp.com</Data>
<Data Name="TargetRealm">CORP.COM</Data>
<Data Name="Targetname">cifs/corp-dc1.corp.com</Data>
<Data Name="ClientRealm">CORP.COM</Data>
<Binary>
</Binary>
</EventData>
</Event>
There are also the following errors in the Application event log
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:13 AM
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.000000000Z" />
<EventRecordID>254767</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:30 AM
Event ID: 44
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The "Windows default" Policy Module "Initialize" method returned an error. Logon failure: unknown user name or bad password. The returned status code is 0x8007052e (1326). The Active Directory containing the Certification Authority could not be contacted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">44</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:30.000000000Z" />
<EventRecordID>254773</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_POLICY_ERROR">
<Data Name="PolicyModuleDescription">Windows default</Data>
<Data Name="MethodName">Initialize</Data>
<Data Name="ErrorCode">0x8007052e (1326)</Data>
<Data Name="param4">The Active Directory containing the Certification Authority could not be contacted.
</Data>
<Data Name="ErrorString">Logon failure: unknown user name or bad password.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificateServicesClient-AutoEnrollment
Date: 7/24/2013 10:55:31 AM
Event ID: 6
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
Automatic certificate enrollment for local system failed (0x8007052e) Logon failure: unknown user name or bad password.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificateServicesClient-AutoEnrollment" Guid="{F0DB7EF8-B6F3-4005-9937-FEB77B9E1B43}" EventSourceName="AutoEnrollment" />
<EventID Qualifiers="16384">6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:31.000000000Z" />
<EventRecordID>254775</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Context">local system</Data>
<Data Name="ErrorCode">0x8007052e</Data>
<Data Name="ErrorMsg">Logon failure: unknown user name or bad password.
</Data>
</EventData>
</Event>
Link to output of DCDiag on pastebin: http://pastebin.com/VFPTcEGT
Smply based on a quick look through of the dcdiag and the various event log messages, It seems to me that the NetLogon service not starting up is causing most of the errors; but I am not aware of how to get it to start up.

Thank you for the quick response!
Windows firewall is disabled for all network profiles.
We have do have 7 DC's in the forest.  here's an image i created a while back that lists our DC's and shows the replication partners (not really relevant, but this shows the DC's) http://i.imgur.com/AtjGuiM.jpg
I believe May 27 was a date in which we performed maintenance/upgrades on our vmware virtual hardware on this VM; when we upgraded the virtual hardware, it created a new NIC device on this server (which is how the system lost it's IP address configuration).
 Today, I assigned the correct IP to the 'new' NIC.
will look at link about Kerberos
I'm unfortunately not familiar enough with the purposes of the internal vs external forwarders to comment on this or make a change at this time.
IPConfig info shown below
DNS is AD integrated, each domain has it's own DNS servers and have conditional forwarders to point to the other domain when appropriate. I believe each DC is also running DNS, but via DHCP we only pass out at most two DNS servers to client systems (main
office, it's 192.168.1.7, 192.168.1.8)
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC6
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-5C-29
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f43a:f215:c266:5a70%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.190(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-F5-25-A1-00-50-56-AD-5C-29
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{5B04D7AC-9161-4A51-9ADC-166E37EE4D0E}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corp-dc1
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-50-56-AD-29-1D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC2
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter #3
Physical Address. . . . . . . . . : 00-50-56-AD-67-B0
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.7
192.168.1.8
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sub-dc2
Primary Dns Suffix . . . . . . . : sub.corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sub.corp.com
corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter
Physical Address. . . . . . . . . : 00-50-56-AD-39-7E
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.136
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sibling-DC3
Primary Dns Suffix . . . . . . . : sibling.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-6E-97
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7c97:854f:8bf5:efdb%17(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.147(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, May 27, 2013 2:53:39 PM
Lease Expires . . . . . . . . . . : Thursday, July 25, 2013 2:56:42 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.7
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B5-55-91-00-50-56-AD-6E-97
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.occfiber.com:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corpsite3-dc7
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Dallas:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-19-B9-EA-65-FA
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.35.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DNS Servers . . . . . . . . . . . : 192.168.35.7
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : siblig-dc1
Primary Dns Suffix . . . . . . . : siblingsite2.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter smpdc1_nw:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-14-5E-2B-0D-88
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.20.24.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.20.24.5
DNS Servers . . . . . . . . . . . : 172.20.24.2
172.20.24.221

Similar Messages

  • E70 PDF Reader : Unable to open. File type not sup...

    This morning I have bought an E70, among others due to its highscreen resolution and the possibility to run a PDF reader on it.
    I have now tried ...
      - the pre-installed Adobe PDF Reader
      - the Adobe PDF Reader supplied with the PC Suite CD-ROM
      - the Adobe PDF Reader available on europe.nokia.com
    I am fascinated by a software which presents itself in the About box as '1.5', prompts during installation for '1.0.5' and has filenames '1_5_0'.
    Apart from minor variations in the SIS filenames they all share the same annoying feature: They refuse to display any of my PDF files but display a message 'Unable to open. File type not supported. 5. !' instead.
    It doesn't seem to be a problem of the PDF files, since a collegue of mine was able to open them on his E61 or E70 (forgot to ask).
    Any idea what this problem could be caused by?

    I am speechless -- but happy.
    The complaint about the file type only appears if you try to open a PDF stored in the phone memory but not if you try to open a PDF stored on the memory card.
    Problem solved.

  • Unable to open message. Format not supported.

    This problem has already  been discussed here however I can provide some more detailed information. Our company runs a network of automatic telemetry stations. The stations send short messages containing some data to the users. Even though the message contains only a plain text and can be displayed on most mobile phones without any problem, it can't be displayed on some Nokia phones, e.g.. N8 and 2630. The model 2630 shows "Message cannot be displayed". The N8 shows "Unable to open message. Format not supported", but the beginning of the message (preview) is readable in the inbox.
    On the sender side the  Wavecom wireless CPU model Q2686 is used. I tried to send various messages using AT+CMGS command but regardless of the content they cannot be displayed on N8 and 2360.
    Please help. If anyone is interested in this problem I can demonstrate it by sending an 'undisplayable' message to his mobile phone number.

    Hi,
    I have N8, and same thing happened to me when i recieved MMS Confg. for using operator internet mobile,  "Message Format not supported"
    about me i change to another GSM operator, and its work now.
    i think u can add an access point manually, go to ur GSM Operator and take the setup details, and from conective > setting > Destinations > Add new acc. pt. 
    Hope this will help u.

  • I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

    I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

    I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

  • Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

    Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

    Hi Stephen,
    What version of MS Office are you using?
    Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
    Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
    From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
    The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
    • Outlook.com SMTP server address: smtp.live.com
    • Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com SMTP password': Your Outlook.com password
    • Outlook.com SMTP port: 587
    • Outlook.com SMTP TLS/SSL encryption required: yes
    For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
    The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
    • Outlook.com POP server address: pop3.live.com
    • Outlook.com POP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com POP password: Your Outlook.com password
    • Outlook.com POP port: 995
    • Outlook.com POP TLS/SSL encryption required: yes
    Regards,
    Rave

  • Message bean does not start automatically during application server startup

    I have a message bean that does not start up during application server startup. I am able to successfully start the application manually using the visual admin tool.I searched the logs and found the following error. The error references the "QueueConnectionFactory" is not deployed or is not started. I have check and the "QueueConnectiopnFactory" is deployed. Is this a problem with the application trying to start before the "QueueConnectionFactory"? Is thier a way to define a dependency on my application not to start until the "QueueConnectionFactory" has been started, if so can how would I define this dependency. Please provide and example.
    Thanks,
    Bill
    #1.5 #001CC4695AD8001A000000100000079C00045DB6C93D4DAD#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Connecting Model Repository ...#
    #1.5 #001CC4695AD8001A000000110000079C00045DB6C93D4E1D#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Checking source path: halliburton.com/hal~usrgrpap#
    #1.5 #001CC4695AD8001A000000120000079C00045DB6C93D4EAC#1228939548538#System.err##System.err#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Plain###[RunTask] The source file/path doesn't exist: halliburton.com/hal~usrgrpap#
    #1.5 #001CC4695AD8001A000000130000079C00045DB6C93D4EF5#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Opening connection to MMR ...#
    #1.5 #001CC4695AD8001A000000140000079C00045DB6C93D69D0#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Start local transaction ...#
    #1.5 #001CC4695AD8001A000000150000079C00045DB6C93D6B5A#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Commit ...#
    #1.5 #001CC4695AD8001A000000160000079C00045DB6C93D6C8B#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Running task 'com.sap.ip.mmr.db.tasks.TaskUndeployFromDB' ...#
    #1.5 #001CC4695AD8001A000000170000079C00045DB6C93D8E6C#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Close connection to Model Repository ...#
    #1.5 #001CC4695AD8001A000000180000079C00045DB6C93D8EE5#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###done.#
    #1.5 #001CC4695AD80018000000000000171400045DBBE9BCCED0#1228961568691#com.sap.engine.services.connector##com.sap.engine.services.connector######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error##Plain###ResourceObjectFactory.getObjectInstance(), Error: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                    at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                    at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                    at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                    at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                    at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                    at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                    at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                    at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    #1.5 #001CC4695AD80018000000010000171400045DBBE9BCE3CD#1228961568691#com.sap.engine.services.jndi##com.sap.engine.services.jndi######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Warning#1#/System/Audit#Java###Exception #1#com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                    at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                    at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                    at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                    at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                    at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                    at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                    at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                    at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                    ... 24 more
    #1.5 #001CC4695AD80018000000030000171400045DBBE9BDBF4A#1228961568753#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation startApp with application halliburton.com/halusrgrpap.#2#startApp#halliburton.com/halusrgrpap#
    #1.5 #001CC4695AD80018000000040000171400045DBBE9BDC46C#1228961568753#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation startApp with application halliburton.com/hal~usrgrpap.
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:367)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                    at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                    at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                    at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                    at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                    at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1013)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                    ... 12 more
    Caused by: com.sap.engine.services.ejb.ContainerInitializationException: Cannot initialize message system bridge com.sap.engine.services.ejb.message.JMSBridgeFP.
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:451)
                    at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                    at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                    ... 16 more
    Caused by: com.sap.engine.services.ejb.message.JMSBridgeException: Destination name PortalUserGroupProcessingQueue not found in the naming.
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:129)
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                    ... 19 more
    Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                    ... 20 more
    Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                    at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                    ... 24 more
    #1.5 #001CC4695AD80018000000060000171400045DBBE9BE0AF5#1228961568769#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Plain###
    Operation startApp over application halliburton.com/hal~usrgrpap finished with errors on server 105677750. For more detailed information see traces of Deploy Service.#
    #1.5 #001CC4695AD80018000000080000171400045DBBE9BE27D1#1228961568769#com.sap.engine.services.ejb##com.sap.engine.services.ejb######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Java#ejb_2119##Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.#1#com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP#
    #1.5 #001CC4695AD80018000000090000171400045DBBE9BE2842#1228961568769#com.sap.engine.services.ejb##com.sap.engine.services.ejb######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1013)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                    at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                    at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                    at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                    at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                    at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                    at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                    at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.ejb.ContainerInitializationException: Cannot initialize message system bridge com.sap.engine.services.ejb.message.JMSBridgeFP.
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:451)
                    at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                    at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                    at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                    ... 16 more
    Caused by: com.sap.engine.services.ejb.message.JMSBridgeException: Destination name PortalUserGroupProcessingQueue not found in the naming.
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:129)
                    at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                    ... 19 more
    Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at javax.naming.InitialContext.lookup(InitialContext.java:347)
                    at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                    ... 20 more
    Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                    at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                    at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                    at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                    ... 24 more
    #1.5 #001CC4695AD80019000000000000171400045DBBEB38B908#1228961593581#com.sap.jpe.engine.impl.common.AnalyzerModel#sap.com/com.sapportals.supportplatform#com.sap.jpe.engine.impl.common.AnalyzerModel#Administrator#67####43c8e9d0c72911ddcedd001cc4695ad8#SAPEngine_Application_Thread[impl:3]_38##0#0#Error##Plain###Exception while loading class: com.sapportals.supportplatform.plugins.portal.connectors.ConnectorGatewayServiceCheck
    java.lang.NoClassDefFoundError: com/sapportals/portal/prt/resource/ResourceException
                    at java.lang.Class.getDeclaredConstructors0(Native Method)
                    at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
                    at java.lang.Class.getConstructor0(Class.java:1930)
                    at java.lang.Class.newInstance0(Class.java:278)
                    at java.lang.Class.newInstance(Class.java:261)
                    at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadClass(PluginCollector.java:881)
                    at com.sap.jpe.engine.impl.pluginloading.PluginCollector.getPluginDescFromXMLFile(PluginCollector.java:387)
                    at com.sap.jpe.engine.impl.pluginloading.PluginCollector.getPluginDescFromXMLFile(PluginCollector.java:274)
                    at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadPluginsFromJarFile(PluginCollector.java:169)
                    at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadFromExtDirectory(PluginCollector.java:121)
                    at com.sap.jpe.engine.impl.common.AnalyzerModel.loadPlugins(AnalyzerModel.java:411)
                    at com.sap.jpe.engine.impl.common.AnalyzerModel.loadPlugins(AnalyzerModel.java:399)
                    at com.sapportals.supportplatform.SupportPlatform.init(SupportPlatform.java:81)
                    at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:59)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at javax.security.auth.Subject.doAs(Subject.java:379)
                    at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:141)
                    at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
                    at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
                    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
    I've could change that yes, but the startup script doesn't seemed to have this mind.
    Regards,
    Sve

  • [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]

    Hii ..
    need help on this ..
    This what I am doing ..
    I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
    So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same  in that order only in my SQL table.
    When I run it fails with this error:
    ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
    ODBC Layer Error: Native Error code [213]
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
    Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
    SQL Connection is Freed
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
    Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
    Total Calc Elapsed Time for [test.csc] : [1.44] seconds
    =============================================================
    I did a simple test on my Sample.basic application then ..
    loaded the calc data to it and then used the below script to export to a flat file
    //ESS_LOCALE English_UnitedStates.Latin1@Binary
    SET DATAEXPORTOPTIONS
                    DataExportLevel "Level0";
                    DataExportOverwriteFile ON;
                    DataExportColFormat OFF;
                    DataExportDimHeader OFF;
    FIX(
                "Jan",
                "Sales",
                "Actual"
    /*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
    DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
    ENDFIX
    out put as below:
    "Sales"
    "100-30","California"
    "Jan","Actual",145
    Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
    but when I create the columns with same name as what its in export
    Sales/100-30/Califirnia/Jan/Actual
    It created the new rows successfully ..
    So with this I think the error which I am getting with my other application might be because of the same column issue  .. but then I have created all the columns by looking at the export file only as I did in sample ..
    Any idea would be helpful ..
    Thanks
    Abhishek
    I

    First make sure you add
    DataExportRelationalFile ON;
    to your set commands it is missing
    I alwats like to also add
    DataExportColHeader dimensionName;
    so I am sure what dimension is getting put into the columns.
    Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table  -1 + the number of  members you will be returning as columns in the export
    Taking your example Sample basic has 5 dimensions
    Measures
    Years
    Scenario
    Product
    Market
    Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
    5 -1 + 1 = 5 columns in your table which is what you found works.  Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2

  • TestStand Open SQL Statement does not support SQL's ORDER BY clause???

    TestStand 1.0.3
    Windows 2000 SP1
    SQL Server 2000 Personal
    You've got to be kidding me...
    It appears that the built-in TestStand Open SQL Step does NOT support the
    "ORDER BY" clause in the SELECT statement, even though the documentation
    says it does. Is this true?
    I have an Open SQL Statement query:
    "SELECT * FROM [MyTable] WHERE ([Batch ID]=1234)"
    it works fine, returning a correct record count 120 records. If I change
    the Open SQL Statement query simply by adding an ORDER BY clause, such as:
    "SELECT * FROM [MyTable] WHERE ([Batch ID]=1234) ORDER BY [MyField] ASC"
    it returns a record count of zero. I know that "MyField" exists in the
    MyTable table and contains valid data. The
    second query works fine in SQL
    Server Enterprise Manager.
    Am I missing something? Is it true that the TestStand Open SQL Step does
    NOT support the "ORDER BY" clause? If not, what &#$!ing good is it and why
    does the manual state it is supported? Is there any other way using just
    the TestStand steps to order a database recordset on one or more fields?
    Any help would be appreciated.
    Grrrrr....
    Bob Rafuse
    Etec Inc.

    > Bob -
    > The database step types do not do anything special to the SQL command
    > that you give it. The step just passes the command to the ADO
    > provider. I tried a simple query using the step types with the
    > following command,
    >
    > "SELECT UUT_RESULT.* FROM UUT_RESULT WHERE ([UUT_SERIAL_NUMBER] =
    > 12345) ORDER BY [EXECUTION_TIME] ASC"
    >
    > and this return the expected results and the record count parameter
    > was as expected. I tried this on TS 1.0.2 and TS 2.0 with MS Access
    > 2000 and MS SQL Server 7.0. I do not have MS SQL Server 2000 at this
    > time.
    >
    > It would be surprised if the step types are messing something up.
    I've been doing some experimenting over the past couple of days. Simple,
    one-table queries seem to handle the ORDER BY clause fine. Th
    ings seem to
    get messed up when I try multi-table queries with ORDER BY clause with the
    TestStand database steps. I get no errors but the returned record counts
    are always 0 with the ORDER BY and positive without the ORDER BY. The exact
    same queries work fine in Visual Basic/ADO and the SQL Server Query
    Analyzer.
    > Questions:
    > 1. Have you verified whether the data is actually returned even though
    > the record count is zero?
    Hmmm... yes data IS getting returned (at least on the two instances I just
    checked), but the record count is always zero. I was not proceeding with
    processing if the record count was 0.
    Still... I don't know how to loop through the recordset without knowing how
    many records there are an not eventually generate an error by passing EOF.
    Is there another way using the TestStand database steps to determine a) the
    number of records in the recordset or b) when I'm at EOF?
    > 2. Are you using any advanced options on the Opend SQL Statement step
    > type, specifically
    the cursor type set to forward only? Forward only
    > cursors do not allow for record counts.
    Everything on the Advanced tab of the Open SQL Statement step is set to "Use
    Default".
    Bob.

  • If default domain name and server name is not accepted weblogic server 6.1 does not start as NT service

    I want to change the domain name and the server name ( I do not want
    mydomain, myserver) while installing
    weblogic as an NT service. After installing and starting weblogic from NT
    services program, weblogic does not start
    But if I start it from the command script, it starts
    Thanks
    madhu

    Hi,
    I could start weblogic as an nt service by changing the name of the
    default server and domain. I had to include password in the
    installNTservice script.
    Thanks
    Madhu
    Michael Young <[email protected]> wrote in message
    news:[email protected]..
    Hi.
    Please open a case with BEA support.
    Thanks,
    Michael
    m holur wrote:
    I want to change the domain name and the server name ( I do not want
    mydomain, myserver) while installing
    weblogic as an NT service. After installing and starting weblogic from
    NT
    services program, weblogic does not start
    But if I start it from the command script, it starts
    Thanks
    madhu--
    Developer Relations Engineer
    BEA Support

  • Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

    Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
    I see problem:
    I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
    Anyone have ideas on what the issue could be? Thanks!
    Some Info:
    MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
    Mac OS 10.8.3
    Audition CS6 5.0.2 Build 5
    and reply:
    Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting.  If that fails, we can continue troubleshooting.
    I have the same problem as the author writes. But these actions do not help

    Unfortunately I believe that requires purchasing the new version, and I do
    not have budget approval for such a purchase.
    On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

  • Garageband does not start and I get this open and do not shut down or restart

    garageband does not start and I get this open and do not shut down or restart

    Such an error is always caused by inconsistent files in the Firefox program folder (application.ini and/or platform.ini and possibly others) and your only option is to reinstall that version of Firefox, either via the software repositories or the Mozilla server.<br />
    Be sure to delete all files in that folder before copying the files from that tar.bz2 archive.<
    *http://kb.mozillazine.org/Installing_Firefox#Linux
    Note that the current ESR version is 10.0.5
    *http://www.mozilla.org/en-US/firefox/organizations/all.html
    *http://www.mozilla.org/en-US/firefox/17.0.5/releasenotes/
    *http://www.mozilla.org/en-US/firefox/17.0.5/system-requirements/
    All Firefox releases:
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ (17.0.5esr/, latest-esr/, latest/)

  • I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

    I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

    Hi,
    A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
    It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
    The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
    Would you be able to explain why and assist in resolving that issue?
    Here is what we know:
    When the backup is run manually via the Windows Backup Software UI, it works fine.
    When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
    start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
    If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
    Idem if you schedule task is run automatically at scheduled time.
    The schedule task run and complete successfully but the backup job does not start.
    It is confirmed by running the following in a command prompt as 'nt authority\system':
    schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
    SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
    Despite success result, the Backup job does not start running...
    No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
    If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
    Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
    <?xml version="1.0" encoding="UTF-16"?>
    <Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
      <RegistrationInfo>
        <Author>MYDOMAIN\SERVER1</Author>
        <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
      </RegistrationInfo>
      <Triggers>
        <CalendarTrigger id="Trigger 1">
          <StartBoundary>2014-07-14T21:00:00</StartBoundary>
          <Enabled>true</Enabled>
          <ScheduleByDay>
            <DaysInterval>1</DaysInterval>
          </ScheduleByDay>
        </CalendarTrigger>
      </Triggers>
      <Principals>
        <Principal id="Author">
          <UserId>S-1-5-18</UserId>
          <RunLevel>HighestAvailable</RunLevel>
        </Principal>
      </Principals>
      <Settings>
        <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
        <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
        <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
        <AllowHardTerminate>true</AllowHardTerminate>
        <StartWhenAvailable>true</StartWhenAvailable>
        <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
        <IdleSettings>
          <StopOnIdleEnd>false</StopOnIdleEnd>
          <RestartOnIdle>false</RestartOnIdle>
        </IdleSettings>
        <AllowStartOnDemand>true</AllowStartOnDemand>
        <Enabled>true</Enabled>
        <Hidden>false</Hidden>
        <RunOnlyIfIdle>false</RunOnlyIfIdle>
        <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
        <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
        <WakeToRun>false</WakeToRun>
        <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
        <Priority>7</Priority>
      </Settings>
      <Actions Context="Author">
        <Exec>
          <Command>%windir%\System32\wbadmin.exe</Command>
          <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
        </Exec>
      </Actions>
    </Task>
    Thank you in advance for your feedback.

    Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
    By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
    behavior and constitute a major bug in Windows Server 2012.
    From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
    This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
    it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
    As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
    constitute a bug of Windows Server 2012?
    Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
    done.
    We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
    sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
    needed!!!
    Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

  • Open Task Button does not come in Outlook

    I have a three level approval workflow in which each level an email is generated to the approve to approve or reject.
    But suddenly the Open Task Button does not pop up in Outlook 2010 anymore can you tell me why?
    Srinivasan Kidambi

    had the same issue with External users not using Outlook. This is how I fixed it:
    Open the task list that the workflow is using and connect it to Outlook. Then kick off a workflow to make a new task. Once the task is made open the task from Outlook. The bottom options (review, perform the specific req. for the task, and Open this task)
    are now links. Hover your mouse over the link and you will see the address.
    Now open SPD, connect to your site and open the work flow assc. to the doc lib.
    Start editing the workflow and click the "Approval" link
    Click "Change the behavior of a single task"
    You are going to have to look for all the instances of "then e-mail task notification to "Current Task:Assigned to"
    Open "Current Task:Assigned to"
    Click where you want he link to go and hit the Hyperlink button
    name the link whatever you want, then hit the string builder ("..." button)
    Copy the link from the Task in Outlook into the string builder (if you use External addressing you can also hard code the External address).
    At the very end of the link where is says ID=(then a number) delete the number and DO NOT put a space. Click the Add or Change Lookup button and use "Current Task: Approval" "ID" "As String" and click ok. Should like this:
    Now this will not pop the form up, but it will send the user straight to the task form (might have to enter username and password) for the correct task. Remember to do this to all the "Current Task:Assigned to" in the workflow. It sounds like a chuck of
    work but it does not really take thaty long on the OOTB Approval workflow.
    Just wanted wanted to add my two cents.
    Also check
    http://social.technet.microsoft.com/Forums/en-US/417466a3-cdcb-4559-8453-9fff6da4aceb/getting-around-a-missing-open-this-task-button-in-a-nonoutlook-email?forum=sharepointcustomizationprevious
    If this helped you resolve your issue, please mark it Answered

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for

  • Share pane hanging after sending multiple emails

    Hello all, I've got a problem with pdf activex integration control AxAcroPDFLib.AxAcroPDF. It is added inside a container of a windows form applicaton (.net), and the use case that I'm looking forward is the "send pdf as attachment using the default

  • Iphone recovery error code 1602

    How recover a iphone 3 without itunes. There is no back up made of this phone.

  • Adding Node and Deleting Node in Tree

    Hi, I am building a tree dynamically. I have a class which has set of properties.I am constructing as follows. public class TreeNode         public function TreeNode()      public var friendlyName:String;      public var icon:Class;      [Bindable]  

  • ODTwithODAC1020221.exe unknown publisher

    I was surprised that Oracle did not sign the executable I downloaded from the OTN web site. I got unknown publisher. Is this standard operating procedure? Thanks, L. Berg

  • Hyperlinks to bookmarks not working

    When I create a hyperlink to a bookmark it works fine when I create it: as soon as the bookmark is chosen from the drop-down menu the link takes me to it. However when I subsequently click the hyperlink (with the 'make all hyperlinks inactive' box un