Server 10.3.9 - MySQL Upgraded and PHP cannot connect to it.
Hi all.
I have a Clean 10.3.9 Build after it crashed I needed to recover it. I would like to use this to host a CMS called MODx but it required MySQL 4.1 and 10.3 ships with 4.0.
So I downloaded the latest installer for MySQL of the website along with the Administration tool and have MySQL 4.1 running happily on the server now.
I have my website configured to use PHP and it loads the pages perfectly - I just enabled PHP in the Apache Module of Server Admin. However it does not connect to the database and everything I have seen so far points to the link in PHP pointing to the bundled MySQL installation rather then an addition.
What do I need to update this configuration - no changes to php had been made it was using the defaults. I did a brief search on the net in the time available - but everything refers to 10.4 - which if we were running it I would not have needed to upgrade - but not to 10.3.
Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.
Similar Messages
-
IPad 16GB iOS 8.1.1 upgrade and now cannot open Music and Videos apps
My iPad 16GB installediOS 8.1.1 upgrade and now cannot open Music and Videos apps...HELP?
Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
Anybody know know if Apple is aware? working on a solution? -
I upgraded to my iPod Touch to iOS 6.1.3 and now the app store and iTunes "Cannot connect to iTunes Store". Help?
this will sound odd... but make sure your time zone is set correctly.... SETTING, GENERAL, DATE & TIME and make sure SET AUTOMATICALLY is turned ON... i had a similar problem and this fixed it.... good luck
-
All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?
I still have access. Must be your phone or your internet connection.
-
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iTunes playlist page on PC is frozen and I cannot connect to store for purchase. I missed an iTunes update download this week and I don't know if this would fix a bug. How can I recover this download to have the latest update.
It would be best to post this question under iTunes category. I am sure there are a few people having the same type of problem.
-
We have just installed Lion and now cannot connect to MyExpat
we have just installed OS X Lion, v10.7.2 and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?
yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b -
My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!
Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).
-
what shall i do if i forgot my ipod 5th gen password and i cannot connect it to a computer???????
ALSO THIS IS THE FIRST TIME SWITCHING ON MY IPOD IN 5 MONTHSIf no computer:
Only if:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise you need a computer with iTunes and an internet connection
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Why am I unable to connect to server to check email? The message reads "cannot connect to server"
Many things could cause this, for example, the email server is down or cannot be reached due to an Internet problem.
-
I did everything recommended on apple store support site and still cannot connect to the network with my new iphone 5 but my co-workers and students (I work for the university) can keep connectivity all the time. I am very unhappy with my new phone
Be patient, Apple is coming out with a update soon, its been reported that they have sent the update to the carriers to test, which means it will be soon. And is suppose to address this issue.
-
My ipod touch passcode is locked and i cannot connect to the computer last synced with
My ipod touch passcode is locked and I cannot connect to the computer last synced with
Place the iPod in recovery mode and then restore on any computer with iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
MySql database and php code on different servers
I created a table on a MySql database on server A. Now I'm
trying to create
a page to display the contents of the table. I know that the
html code ( and
php) is on a different server (server B). I managed to create
a database
connection however when I try this connection I cannot see
the table I
created. When I click on the Connection name I get the Stored
Procedures,
Tables and View list. I click on the Tables and although I
get a connection
to the server A, no table is displayed.
Am I trying to do something silly here?
any help will be appreciated.
Twanny> Am I trying to do something silly here?
I do it this way all the time. My testing server is local to
my development
LAN, but the MySQL server and database is remote (on the
remote site). To
make this work, you would have to make sure that the remote
server permits
an external connection. If it does, you should be golden.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Twanny" <[email protected]> wrote in message
news:gabbu1$ngv$[email protected]..
>I created a table on a MySql database on server A. Now
I'm trying to create
>a page to display the contents of the table. I know that
the html code (
>and php) is on a different server (server B). I managed
to create a
>database connection however when I try this connection I
cannot see the
>table I created. When I click on the Connection name I
get the Stored
>Procedures, Tables and View list. I click on the Tables
and although I get
>a connection to the server A, no table is displayed.
>
> Am I trying to do something silly here?
>
> any help will be appreciated.
>
>
>
>
> --
> Twanny
> -
Different md5 in phpMyAdmin and in mySql client (and PHP)
I have trouble with md5 function - mySql in command line and PHP returns one value, phpMyAdmin another. I have current packaged - PHP 5.2.9-3, mysql 5.1.34-1 and phpmyadmin 3.1.5-1. I searched web for possible reason, only one I found was different encoding, but I doubt that binary representation of string 'aaa' differ between any common encoding (at my machine 8859-1, 8859-2,utf-8). Please, could somebody post here result what is result at your system of
SELECT MD5('aaa');
from command line mysql client and from phpmyadmin ?
Last edited by stabele (2009-05-23 18:58:56)they are identical for both:
Variable_name Value
character_set_client utf8
character_set_connection utf8
character_set_database latin1
character_set_filesystem binary
character_set_results utf8
character_set_server latin1
character_set_system utf8
character_sets_dir /usr/share/mysql/charsets/
Maybe you are looking for
-
Hi folks, I have recently started to use Time Machine and I own two Macs, a MBPro and an iMac. The external disks (two) are FireWire and formatted to HFS+, and stay connected all the time to the iMac. Both Macs are running Leopard updated to 10.5.6.
-
PSE 6 with Windows 7 - three cursor images
This is a new problem. I have PSE 6 and Windows 7. Everytime I use the move tool, it shows up as three cursor images on my work page. To be sure it isn't the combination of the PSE6 with W/7 I downloaded PSE 9 trial. I am still having the same prob
-
How can I find the schema name of the current session
HI, I logged in to one oracle session, I just want to know from which schema I logged in .Please send me the query for it. Regards, Rb
-
Hi, For an Info cube, we had done compression, rollup of aggreagates. And, now we had identified wrong data entry for a field from one of the datasources. How can we correct the information of that filed for the old records without downtime or deleti
-
Enable 'comments' on pdfs printed from within osx
Hello there... We have osx 10.4 on our network at school (soon all machines will be running 10.4.10). I want to get the kids into printing their work to pdf rather than paper and saving these in their folders. What I want to do is enable the 'comment