Server 10.4.7 booting to a RAID1 after clone not working

So I jumped in an replaced the hard drives in the server box, a PPC MDD single 1.25 Ghz maching running Server 10.4.7.
I replaced the Hard drives, booted to the install DVD, zeroed all of them, created 2 RAID 1 (mirrored) and cloned my working backup back onto the System Raid (booting raid). from an external FW drive.
When booting I get the grey screen w/ the Apple and the gears, then the 'Starting Mac OS Server' screen comes up, then all I get is a blue screen, nothing on it, with a curser. Thats it.
There was nothing changed from the original system (2 raids from 4 drives) and all I did was swap out the drives, recreate the raid, clone a blah, crap.
I can boot of teh external FW drive that I cloned over, and all work fine.
Did I miss something?
Thanks for any help.
Spinner

Additional Info:
One of the System Raid drives failed, so I pulled it out, erased the drive, and cloned back the System to the single drive from the external HD.
It still will not boot to it. I get the grey screen w/ the gears, then a blue screen w/ the gears, then the 'starting Server screen, with no progress bar, then just a blue screen w/ a curser. Thats it, no desktop, Nada.
So to get everyone working today I have the system booted to the external drive, and have successfully reset teh sharepoints on the 2nd raid setup (data).
Any thoughts why I cannot take a bootable clone and put it on to a raid (it came from a raid) nor can I put it on a single disk and boot to it.
What am I missing
There is a Sonnet ATA/133 card for the HD's installed.
All drives have jumper settings for cable select.

Similar Messages

  • TS3960 same problem with mavericks server app....tried additional ino solution did not work..any suggestions?

    TS3960: Server App or Server Admin can't connect to a newly upgraded Lion server
    same problem with mavericks server app....tried additional info solution did not work..any suggestions?
    All log in info is correct. will not accept worked fine on 10.8 just upgraded to 10.9 and will not work. deleted and reinstalled server app 3.0.1

    Figured it out....went to server...settings...check allow remote administration using Server

  • How to clone Boot Camp partition when Winclone does not work

    The hard drive in my MacBook Pro is failing. It has 2 partions, one for Apple and the other is a Bootcamp with Windows 7.
    I tried repairing it with Disk Utility, which did not work. I also ran DiskWarrior, which resulted in the error message: "Directory cannot be rebuilt due to disk hardware failure". I was able to copy my Apple files through DiskWarrior although there were a couple of errors.
    My question is how to clone my Bootcamp Partition. I tried making an image with Disk Utility but it failed. I also tried using Winclone and it failed indicating there were hard drive issues.
    Is there another way to try to copy the Bootcamp partition? I can boot to Apple so running a program/app or trying UNIX commands might work.
    Thank you in advance.

    Some previous forum comments I have collected regarding backup of BootCamp.
    Acronis 2011 w/ plus pak, didn't work well previously
    Ghost 15 - probably not
    Casper 6 works for Windows on Boot Camp only
    CopyCatX is more lengthy and sector copy so takes the longest.
    Paragon Hard Drive Suite 2011 because it works great and they have CampTune
    Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
    I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
    I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
    Paragon HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
    I tried the native Windows backup utility.  It worked to backup and restore my Windows partition, but I noticed a "bad" side effect.  When I would restore a Windows Backup to my HD, it would corrupt my MacOS boot partition, so I would then have to restore the Mac partition as well.
    Winclone allows you to migrate your Bootcamp partition from one Mac to another Mac and make sure Windows will boot. However, if the processor (for example, Core Duo or i7) is a different type, the restored version of Windows may not be supported or be able to run on the new Mac. If you are migrating between Macs that are the same type (MacBook Air to MacBook Air, for example), you will have the greatest chance of success. You can try to restore Winclone images between different types of Macs (for example, a Mac Pro to a Mac Mini), but be aware that if Windows boots but does not reach the desktop, it is probably not an issue with Winclone, but rather the change in processor type.

  • Dual-Boot; Restart and boot other o/s USB devices not working

    I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
    Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
    After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
    System no hang or occur any error/BSOD message.All startup programs run as normal.
    I tried to re-plug usb devices but notting happens...  Still not working
    But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
    After power up PC and boot with windows 7 all usb devices works normaly.
    I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
    I'm sure other H/W is OK, but I thnik this mobo have a fault.

    Thank you for reply.My PC system specs:
    CPU:    Intel Pentium G3258 3.2ghz
    Board:    MSI Z97-G43 /Bios: Ver. V17.7
    MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
    VGA:    Sapphire AMD Redeon HD6670
    CASE:    Zalman z3 plus white (5x 120mm fan)
    PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
    HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
    COOLER:    Akasa 92mm PWM Blue Led
    OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
    O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
    All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
    Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
    I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
    I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
    Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
    I think msi z97-g43 mainbıoard have a problem.

  • MacBook Pro Boot Camp Sound Audio Drivers Do Not Work with Miscrosoft Vista

    I installed Vista via Boot Camp on my new 15" i7 MacBook Pro. After full MS Vista patching and Apple Boot Camp driver installation, the sound/audio does not work.
    After some searching on the net, I've noticed that this is perhaps a widespread problem. Are there any solutions or an indication of when this will be fixed?

    When you mean no sound, do you get the volume slider but nothing comes out or do you not get the volume slider at all?
    Go to control panel, sound (you might need to switch to classic view to see the one im on about), then the "sounds" tab, there should be audio clips that you should be able to play, if the laptop has picked up the sound controller in it.
    If you cant play these (greyed out) then the driver isnt installed properly.
    There should be a update option in the boot camp program that is installed in your vista partition, run that, and if it fails you can try what is below.
    Try going into device manager, uninstall/remove the drivers under the heading "sound, game and audio controllers" reboot the machine and it should install them back in again.
    If it doesnt and asks for a disc, then they'll be on your max os x disc, but not sure you can install drivers individually this way. might have to reinstall the boot camp drivers from scratch.
    Ive had this proplem on PC's (not macs) with drivers from manufacturer of the machines not working after windows updates. Fixed by using drivers from the audio controller manufacturer. But dont think its the same issue you are having.

  • My Incoming Mail Server is grayed out....so, it is not working. How to fix?

    My Incoming Mail Server  for iCloud is grayed out....so, it is not working. How to fix?

    It easiest way that sometimes solves the problem would be to delete your account from your Mac (system
    Preferences... > iCloud) and then to add it back again.

  • Origin server recovery after failover not working

    version of oracle web cache - webcache9.0.2.0.0_WINDOWS_OWM.zip
    patch set applied - p2885472_9022_WINNT
    firstly architecture is as follows:
    - 1 x Standalone OWC
    - 2 x Origin Web Servers (Standalone OC4J)
    - OWC configured with single site mapped to two origin servers (load-balancing and failover)
    - only http at this point in time
    behaviour i experience is the following:
    1.. 2 origin servers (A + B) running, owc balancing the load
    2.. origin web server A is shut down
    3. owc reports origin web server A to be down on first failed request
    4. all sessions fail-over instantly to origin server B
    5. origin web server A is started again
    6. within 5 seconds owc reports origin web server A to be UP
    7. ****problem**** all requests (even new clients) are forwarded to origin web server B, origin web server A never receives a request again (I've waited more than 10 mins)
    - to restore normal load balancing behaviour i need to restart owc
    -already checked event log in verbose mode and no errors reported

    Hi Venkat,
    In the site-to-server mapping page, make sure that you are matching one Web cache with 2 origin servers in a single entry.
    If possible, I urge you to patch Web Cache up to 9.0.2.3. There has been some bug fixes in 9.0.2.0 regarding load balancing. To obtain a patch, you need to contact Oracle Support.
    Thanks!

  • Boot Camp partition missing, VMware Fusion not working

    I'm using OS 10.10.2
    Windows 7
    Fusion 7.1.0
    Winclone 3.7
    I've been sharing a boot camp partition with Fusion for a while. I don't know when it happened but when I recently tried to log in using Boot Camp, the partition didn't show up in Apple's start up screen or in the Finder even though I could see it in Fusion.
    I needed to expand the partition so I backed it up with Winclone changed the partition from 40 to 75 gig and reinstalled the Winclone file.
    Now I'm unable to boot into Windows using Fusion and I still can't see the Boot Camp partition when I start up.
    Fusion said
    so I did.
    The new virtual machine said
    and
    Now it wants me to upgrade Windows.
    Please help.

    I saw R.NTFS so I started on the Windows DVD and ran Repair.
    Unfortunately I still can't get Boot Camp to do anything beside give me a flashing cursor on a black screen.
    What else can I do?
    This is from the terminal screen after I did everything above. It still says R.NTFS
    Last login: Sat Mar 14 01:30:47 on console
    Bruces-MPB:~ bruce$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
    Password:
    00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
    00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 58 c8 6f  |........?....X.o|
    00000020  00 00 00 00 80 00 80 00  ff 0f a8 04 00 00 00 00  |................|
    00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
    00000040  f6 00 00 00 01 00 00 00  c9 3e 83 34 55 83 34 4e  |.........>.4U.4N|
    00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
    00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
    00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
    00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
    00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
    000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
    000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
    000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
    000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
    000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
    000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
    00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
    00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
    00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
    00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
    00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
    00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
    00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
    00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
    00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
    00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
    000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
    000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
    000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
    000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
    000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
    000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
    00000200
    Bruces-MPB:~ bruce$

  • Boot Camp on rMBP - Games are not working well. Drivers updated, any ideas?

    Windows 7 64-bit Drivers are updated, and OS is current (both in the Mac and Win sides).
    In Asassins Creed III, the resolution stays at the lowest setting. Any attempt to increase the resolution above the lowest setting (not just to the highest setting) results in a blinking screen and an eventual reset back to the original (low) resolution.
    In other games, the mouse appears to be "off" by about 100 pixels to the right. When I click on something, the cursor is not where the clicking happens.
    In still other games, the sound is off. Sound seems to be turned down, even though it's at its max in the game's settings. This only happens for some games.
    Any help is appreciated.

    Did you check Control Panel>Device Manager  ?
    Open up the DVD/CD-ROM Drives and see if your drive is even listed.
    If it is try updating the drivers.
    If not Run Action>Scan for Hardware Changes and see if Windows finds the Drive.

  • ISight is not working with boot camp

    Hi,
    I have a Macbook Pro and very satisfied with it. Formerly I worked with Windows XP, so I decided to buy a Macbook and use boot camp. Everything was fine. In my enthusiasm I bought the LED cinema display. Very good display but the iSight camera is not reliable working with boot camp. There is no driver available. Sometimes the camera is recognized as video device but mostly not. When the camera is not recognized then there is a yellow exclamation mark in the device manager. I don't know what to do. Is anybody working with boot camp and the iSight build in the LED cinema display? And what driver do you use? Hopefully I get some help here. Everything is working convenient except this issue.
    Thank you, Frank

    Sorry, I think I mixed some things. I tried several contellations to find out what is going wrong. The iSight is woking with my MacBook (and boot camp). But it is not working with other Laptops or PCs (all with Windows XP). It is working really rarely but not reliable and not replicatable. In all cases I tried only the USB connector from the LED cinema display. Audio, micro and hub is always working without problems. The iSight driver delivered with the Macbook is not working (only with the Macbook itself). If I had known this before I think I would buy the display although. The display is great. But it is a pity that the iSight is not working when you do not use Apple hardware. May be I will buy the Mac Pro in one or two years when I need a new PC. Perhaps someone can answer if Windows XP is working without problems on a Mac Pro? And is the iSight build in the LED cinema display working (Mac Pro and boot camp)?
    Frank

  • 3.3.3 to 4.0.1.42 not working on secondary server

    I upgraded from 3.3.3 to 4.0.1.42 but still with old Base Image for now:
    Cisco Secure ACS 4.0.1.42
    Appliance Management Software 4.0.1.42
    Appliance Base Image 3.3.1.8
    CSA build 4.0.1.543.2 (Patch: 4_0_1_543)
    I upraded first my master server, that worked fine (after resolving some problems). When I tried to upgrade the "secondary" server, I get the following (in CLI because WEB does not work because services are not started):
    CSAdmin starting
    CSAuth starting
    CSDbSync starting
    CSLog stopping
    CSMon starting
    CSRadius starting
    CSTacacs stopped
    CSAgent stopped
    Appliance upgrade in progress...
    The "upgrade in progress" is for almost 60 minutes now.
    How do I recover the Web access?

    Hi.
    OK, it's not anymore with "upgrade in progress" and CPU went down from 100% to 0%. Some services are still in these states:
    CSAdmin stopped
    CSAuth stopped
    CSDbSync starting
    CSLog starting
    CSMon starting
    CSRadius starting
    CSTacacs stopped
    I tried stoping/starting/restarting them without success, getting this message:
    xxxxxxx> restart all
    CSAdmin is not running
    CSAuth is not running
    Error: Failed to stop service: rc = [1052] The requested control is not valid for this service.
    So I tried to do a shutdown. After coming back up, CPU is back to 100% and services look this way:
    CSAdmin starting
    CSAuth starting
    CSDbSync starting
    CSLog stopping
    CSMon starting
    CSRadius starting
    CSTacacs stopped

  • OS X Server VPN not working

    Hi
    I have had a problem when trying to set up the vpn service on os x server.  I use OS X Mountain Lion server.  The problem is that when I set up the vpn service in the server app, it won't let me connect to the vpn using my public ip address or outside my network.  It will work if I type in the IPV4 address of the server inside the network.  It just won't work outside the network.  I looked up the port number for OS X Server VPN and did the port-forwarding in the router.  Unless i have the port wrong (which is doubt),  why would this not be working.  I am using L2TP to connect to the server but I have also tried PPTP and that did not work either.  I think that the problem must be something with getting the vpn on the internet since it works perfectly fine inside the network. 
    Thanks for any help. 
    Michael

    If you have a port-mirroring switch (I use a Netgear GS105E), it is very handy.
    This is the typical configuration for a VPN. Let us assume L2TP.
    VPN Client (L2TP) -> WAN Router/Firewall (Outside) -> LAN Port Forwarding (inside) -> VPN Server (LNS = OS X server).
    You may not be able decrypt packets, but you can see outer headers. If the WAN Router/Gateway has port mirroring functions, you can watch incoming packets at the WAN Interface. The Router/Gateway should just forward packets to the designated Port/IP.
    If the packets make it past the Router/Gateway,  the Server configuration should be checked. Temporarily, you can turn off the firewall and see if you can get to the OS X server. It will help in pinpointing where the issue might be. Shared secrets should also be checked.
    If you are able to VPN from inside, it is a very strange configuration. Usually coming from inside to inside is not permitted.
    If the clients and servers use the same intranet addresses, for example the client uses 192.168.x.x and the server is also on 192.168.x.x, you will run into issues. You may need to reserve address space for VPN clients.

  • Windows server 2012 R2 PXE boot is unworkable slow, I have this exact same set-up working in 2008 R2 What can I do?

    Hi there
    I'm trying to deploy a windows 7 image through Windows deployment services via PXE boot from a 2012 R2 server.
    Issue:    PXE boot is extremely slow, it takes up to more than 60 minutes for the device to download download the PXE boot
    Things I already tried to get this up and running:
    I've tried to change the TFTP block size via command prompt and via regedit
    I've changed the settings on the tab of the WDS role (go to WDS role -> properties on server -> Tab "tftp")
    Both actions resulted in PXE boot being even slower than it already was.
    To make sure this is not because of our environment I’ve set up the same configuration on a windows server 2008 R2, here PXE boot image is downloaded to the machine within 3 minutes.
    Both servers are set up through Hyper-V this is the configuration:
    2008 R2:
    Memory: 4096 MB
    1 Virtual processor
    IDE controller 2 hard drives
    Network adapter
    2012 R2:
    Memory: 4096 MB
    32 virtual processors
    SCSI controller 2 hard drives
    Network adapter
    I can’t imagine that PXE boot is not working because of the differences of the Hard drives controllers or because of the amount of the virtual processors.
    Windows server 2012 R2 seems to handle PXE boot TFTP differently in comparison to 2008 R2.
    Do you guys know what I can do/try to get this working?

    Hi Jacques Rodrigues,
    You can run Windows Deployment Services on Hyper-V virtual machines,
    that the performance will often be degraded, particularly during the Trivial File Transfer Protocol (TFTP) download phase. This phase is very resource-intensive and may
    fail if insufficient resources are available on your server running Hyper-V.
    If you are using multicast, Check if IGMP Snooping is enabled i.e. Routers that support multicasting. In particular, Internet Group Membership Protocol (IGMP) snooping should
    be enabled on all devices. This will cause your network hardware to forward multicast packets only to those devices that are requesting data. If IGMP snooping is turned off, multicast packets are treated as broadcast packets, and will be sent to every device
    in the subnet.
    The related KB:
    Windows Deployment Services Overview
    http://technet.microsoft.com/en-us/library/hh831764.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Though the root disk is mirrored, server is unable to boot from alternate disk (mirror disk)

    Hi PPl,
    It happened second time in a row. Though the root disk is mirrored, server is unable to boot from alternate disk (mirror disk)
    When the disk was found faulty, still unable to boot the OS from alternate disk, it says it still probe/look for other disk
    Here are the console log when I tried to boot the OS
    sc> console
    Enter #. to return to ALOM.
    WARNING: /pci@0/pci@0/pci@2/scsi@0 (mpt0):
    Disconnected command timeout for Target 1
    WARNING: /pci@0/pci@0/pci@2/scsi@0 (mpt0):
    Disconnected command timeout for Target 1
    WARNING: /pci@0/pci@0/pci@2/scsi@0 (mpt0):
    Disconnected command timeout for Target 1
    In such condition left out with only two options.
    1)      Remove the faulty disk physically and boot
    (or)
    2)      Replace the faulty disk and boot it
    Any way, I can disable the faulty disk in BIOS (or) booting from cd-rom and do something to avoid it?

    You can't boot from systems earlier than that shipped with the computer. For example, early 2008 Mac Pros come with 10.5.1 and can't boot 10.5
    Also you can't boot with a DVD that was shipped with a different model Mac.

  • Windows server 2008 r2 operating system not booting in normal mode after unstalled the virus gaurd

     Windows server 2008 r2 operating system is not booting in normal mode after i uninstalled the virus guard in the system. I tried to repair the system but repairing  option not available in server 2008. i can log in to the system only safe mode.
    Please help me to solve this issue as soon as possible .I do not have the any system backup with me .

    Hi,
    Regarding the issue here, please restart the computer and press F8 until you see the
    advanced boot options, select start windows normally, 
    if it starts with no problem, please check if you have the option boot from safe mode checked:
    run->type msconfig->tab boot->boot options, check if the
    safe boot is selected, if yes please uncheck it. Then restart the computer to check if this problem still exists.
    If the system needs repair, please take a look into the below WIKI article, and check the event viewer to see if any errors for further troubleshooting.:
    Windows Server 2008 Repair Steps for No Boot Issues
    http://social.technet.microsoft.com/wiki/contents/articles/4162.windows-server-2008-repair-steps-for-no-boot-issues.aspx
    Hope this helps
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for