Server 10.6 and client 10.7: slow performance in to show the shared volumes
Hi, I have installed on some Mac the operating system 10.7 and I have realized that it employs more time to connect to the volumes of net shared by Mac OS 10.6 Server, know how to tell me how come?
Tnx!
Having the same issue. Have "Delete outdated software" checked and am using the url.
http://su.domain_name.com:8088/index.sucatalog
In server admin. Overview tab say 568 updates. Updates window report total 308. When a client goes to update it software I get 4 diferent iTunes updates. 10.2, 10.3, 10.4 and 10.4.1. If i look through the list of updates in Server admin. iTunes 10.4.1 only shows up. I was going to delete the catalog files and dowloads and let it rebuild.
Similar Messages
-
i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = kull )
my database name is kull
please somebody helpBiswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database". I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias lsn
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JUL-2013 19:08:06
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor -
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.
Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane. -
product name - iPhone 4s
memory - 64 GB
storage capacity - 56.6 GB
version nos - 8.1.1(12B435)
the WiFi on my iPhone 4s is not working, i have gone to the settings and tried to switch it on but it shows the gray slide and refuse to turn on, what should i do about this.iOS: Wi-Fi settings grayed out or dim - Apple Support
-
helpppp
I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?See if this helps: http://support.apple.com/kb/TS3694#USB
If it does not help, the drop probably damaged something inside the phone. -
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
i forgot the password of my iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!
Hello there, RFJA2211.
The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!
Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan -
i try to unstall my creative cloud and adobe manager by delete their file, and now try to restall it, but it show the code.84
Hi Acacia_km,
I believe you are only trying to install the fresh version of Creative Cloud Desktop application ? If yes, please navigate to the following location and perform the steps as mentioned .
For Windows
1) Navigate to : C:\Program Files (x86)\Common Files\Adobe\OOBE
2) Rename this folder to OOBE_old and try the installation of the Creative Cloud Desktop Application.
For Mac
1) Navigate to : /library/application support/Adobe/OOBE
2)Rename this folder to OOBE_old and try the installation of the Creative Cloud Desktop Application.
Do let us know if this works fine for you or if you require any further help regarding this.
Cheers,
Kartikay Sharma -
My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?
Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it
-
I am using server and clients machines in my office, here i want to open browsers in all systems simultaneously but i am unable open the browser, when i am trying to open the browser in the second machine it says that firefox is already open... pls. solve this problem
Thank youYou can't open one Profile more than once. You need a separate Profile for each browser on each PC that you open.
https://support.mozilla.com/en-US/kb/Profiles -
In RMI can I have server in j2se and client in j2me
serious help needed guys
I am doing final year project,
I want to have a PC to run a server and client program on a mobile device.
I am sending text messages from mobile device and those messages will be received by the server and displayed on the server itself
Is it feasible to have a Remote Method Invocation like that?
Please help, Thanks in advanceserious help needed guys
I am doing final year project,
I want to have a PC to run a server and client program on a mobile device.
I am sending text messages from mobile device and those messages will be received by the server and displayed on the server itself
Is it feasible to have a Remote Method Invocation like that?
Please help, Thanks in advance
Maybe you are looking for
-
DTP does not fetch all records from Source, fetches only records in First Data Package.
Fellas, I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source) The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull da
-
File Adapter: Flat-file to XML
New to the Oracle ESB. I am using the file adapter to read in a fixed-length flat file, have mapped it to an xsd and now I just want to dump the resulting xml into a directory. I don't see an obvious way to do this without converting it back to a fla
-
I've made many DVDs after editing in IMovie but often get problems. The latest is the most annoying as I've transferred 6 movies, 2 slideshows and 2 trailers but the largest of these (a movie) doesn't play correctly. The dodgy one is 20 minutes long
-
We are trying to use a custom table for importing/posting journals in GL. Is it sufficient to enter the custom table name in GL_INTERFACE_CONTROL? Or any other changes necessary? Thanks Raghu.
-
Hi All, I need to trigger a particular message out put type for a PO in two printers at a time. Is it possible in SAP?if yes how it can be done. Currently when the message out type is triggerred, PO is printed at one printer. We are making it to prin