server :19000/hfm not available - causing issues

1. 11.1.2.2 Distributed Environment - Foundation server I can access <foundationhostname>:19000/hfm just fine. However, if I copy and paste that onto another server and try to hit the web address <foundationhostname>:19000/hfm - I get a HTML 500 error. I can access <HFMHostname>:80/hfm just fine though.
2. HFM is not installed on the foundation server
3. No issues with connectivity at all on foundation server
4. No VIP is in use (Logical address was initially set up for the environment, is not needed though)
5. **this is where we see the issue** Trying to assign access control in shared services to a HFM application fails when not on foundation server due to HTML 500 error (due to the <server>:19000/hfm failing)
6. Every other piece of the environment works just fine
7. Hosts file is set up just fine
Any thoughts? I cant seem to find any documentation on this anywhere on why this would happen for just the SS to HFM piece. If something was awry from a communication perspective it should be popping up in other areas too.
-Matt

The only documentation on anything even remotely like this was a bug:
from knowledge base
In Hyperion Financial Management (HFM) 11.1.1.4 it is not possible to assign access control in Shared Services. The following error is shown instead of the access control gird:
Communication Error : http://server_name:19000/hfm/security//getRights.asp
500 Internal Server Error
Internal Server Error
The server encountered an internal error or
misconfiguration and was unable to complete
your request.
but that is not what the issue is - as the actual error is:
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
Access.log entry:
"POST /hfm/security/bpm/launcher.asp HTTP/1.1" 500
Notice no double slashes...
Same issue occurs when browsing for a url POV value and clicking the edit link when setting up a HFM taskflow. Im guessing this is a new bug?
-Matt

Similar Messages

TF400893: Team Foundation Server services are not available.

Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
Regards

Hi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Enough RG1 balance is not available to issue the Goods

Hi All
I am getting this error when I run "India - Excise Invoice Generation" Request by entering the Delivery Id. The Log file of the request showing this error ORA-20199: Enough RG1 Balance is not available to issue the Goods. But when I check the on hand quantity exists. Quantity is available even after reservation and shipping is done.
Can anyone please tell me the reason and resolution if you had faced this error before.
Thanks in Advance
Prem.

Process steps are as below .
Material master with base unit "SHT-Sheet" and maintained alternative unit "M2- Square Meter" along with conversion factor 4930 M2 = 100 SHT. Incoming quantity inspection type (01) is also active on the material.
Purchase Order quantity in alternative UnM like 1500 M2.
Purchasing Info Record maintained with alternative pricing Unit “M2”.
Good Receipt Quantity posted in the alternative Unit of Measure with 1500 M2.
Usage decision recorded with Base unit Quantity 30.426 SHTs
Error - PU GR blocked stock exceeded by 0.002 SHTs : 2847 1000 M7 22
Cause of error which i observed is below.
On usage decision, system calculating stock posting quantity "30.426" / Conversion factor "( 100 / 4930 )" = 1500.002 and this quantity "1500.002" exceeded from block stock quantity 1500 as posted at the time of GR in the block stock via 103 mvt.

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Activation doesn't work on newly bought Iphone5 - there is written that the server is temporarily not available??

Hey people
I just bought an iPhone5 in a store, and I can't activate it. There is written that the activation server is temporarily not available. What's happening ?

Sounds like you just purchased a hacked iPhone & Apple's servers have detected such. If not an "authorized" iPhone store, return the phone for a refund.
Apple's activation servers are running just fine.

HT1937 the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another

the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.

Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

HT1414 The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert anothe

The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.

I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

IOS 7 Safari (as well as OSX 10.9) Credit Card prompt "not now" causing issues

Experiencing the same problem as this thread from stack overflow. safari on iphone/ipad http://stackoverflow.com/questions/21769058/ios-7-safari-as-well-as-osx-10-9-cre dit-card-prompt-not-now-causing-issues
Safari on ios7 devices stops my form from submitting when it prompts to remember card.
there must be a workaround other than pulling a pw field off the page???

You can condense it down to a couple of options, shadowbeast, if you have a computer that is regularly maintained, not over-full, doesn't have much in the way of third party haxies installed, has had its directories checked recently, don't try to install the update while simultaneously running other software, etc etc. Trouble is in many cases such parameters aren't met!
Using an update situation as an opportunity to undertake the general maintenance that should be done every month or so on any computer , (even if it is a Mac!) helps to forestall many other problems, too, as well as helping to ensure that the update process goes smoothly.
I agree that the "Combo" update can be a good idea, sig, and I've usually done so in the past myself. In some circumstances it can certainly help to overcome problems that have arisen along the way. These days, however, the updates themselves tend to be very large (in this case the "combo" version is over 800 MB in size) and I'm very aware that many , many people use the smaller Software Update versions. These seem to be less problematic than they used to be in the past, though if anything is problematic after the installation downloading the Combo and re-installing it over the top of the SU version is a very good idea.
I've been trying the SU updates regularly myself since SL arrived on the scene, and all have gone smoothly. Mind you, this has been on a couple of pretty well maintained machines.
Cheers
Rod

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

Web service is running but Server Admin says "Not available"

Hello,
I cannot configure the web service using the Server Admin tool any more. The service is running and showing no error, but the "Web" icon in the "Computer & Services" panel of Server Admin is showing dark grey color. The Overview tab of the Web Service is stating: "Web Service is: Not available"
Any ideas what I can do to get it work again?
sudo apachectl configtest gave no errors or warnings.
Mac OS X (10.4.7)

You should not be logging in as root, despite what anyone has told you.
And the entire mechanism of OS X Server (and most other *nix OS-en), is meant for you to not be logged in as root.
Use sudo and/or authenticate in the GUI when/where needed.
Please try Wesley's advise here:
http://discussions.apple.com/thread.jspa?messageID=2862670
Try launching apache manually, and watch your logs
Ie:
in one terminal window, type:
tail -f /var/log/httpd/error_log
make a new Terminal window and type:
sudo apachectl start

Ovi store on n8 server error payservice not availa...

can"t buy apps send from ovistore to my nokia n8 get the message:server error payservice not availlable
anybody any suggestions how to solve this

I have figured out a work around.
I have two n8s, and the one I got yesterday (for my wife) the ovi social and store were not working.
Here is how I fixed it.
menu - settings - connectivity - settings - destinations -
under Uncategorised I had 4, but nothing under Internet. I created a new access point under internet, and copied the settings from one of the ones under uncategorised. (fyi - my older n8 has 4 options in Internet, and only one under uncategoried).
It seems that Ovi will only use an access point under Internet. I closed down the menu and went into Ovi and it works perfectly.
Hopefully this work around fixes everyones issue with this. Let me know if you have any other questions.
Dion

Facetime server error - certificate not available/expired

Hello,
I have a variation of the facetime error many have been seeing, but this is an odd one;
All of a sudden, facetime errors out logging on with a server error (try again later).
Console reveals that the 'certificate is missing' then 'certificate is expired'.
I deleted the offending one, but it doesn't get recreated, nor does it help.
Everything else seems to work. THe system hasn't seen any changes, but an iPad was configured and on it, facetime, to the same Apple ID (have done that on many systems, but here is may have caused some issue?).
Can anyone help? How does facetime get a new push certificate to start working again?
Thx
Dan

I have the same problem. All of a sudden FT stoped working on my iMac (Lion 10.7.2). Works on my iPhone 4 with no problem. As soon as I try to log in with my Apple ID (works ok) and click the verify button i get pushed back with this error message:
The server encountered an error processing registration. Please try agian later.
When i open up Console and review whats going on during that period of verification i get this output:
imagent[335]: ApplePushService: Certificate is expired
imagent[335]: [Warning] Missing push certificate
imagent[335]: [Warning] Cleaning up validation info
version of FaceTime is 1.1.1 (262).
Any info on how to sort this problem? How do i get a new push certificate? I'm not a developer so I have never done that even tho I have seen posts that one can do that via Developer page on Apple site.
Any help would be appreciated. Ty in advance

Crystal Reports Job Server - Default destinations not available

Greetings,
Currently I'm installing Crystal Reports XI onto a new server.
When scheduling reports they are stuck in a 'pending' status which records the following error in the windows event log:
Transport System exception for backend plugin DLL type newIJob():: Couldn't get IJob interface: CORBA exception! Object type is: CrystalEnterprise.Report and detail: IDL:omg.org/CORBA/UserException:1.0
. Details: %2.
After further investigation I discovered the Crystal reports job server has no defaul destinations, however the servers Destination Job Server and Program Job Server do have the default instances.
Firstly I assume the error reported in the event log is due to there are no destinations, as the scheduler won't know where to send out to.
Can anyone help in advising how to ensure the reports server had some default destinations?
I have restarted the server and rebooted the Crystal reports server too.
Thanks
Rob

Hi RobWhalley,
Could you provide me which version of Crystal Reports Server XI you use?
you could find useful below articles.
[1202926 - Scheduled reports in Crystal Reports Server XI Release 2 stays in 'Pending' state |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303332333933323336%7D.do]
[1477380 - Crystal Reports in Pending status|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373337333333383330%7D.do]
And please check job server is enabled and under the CMC > Server > Crystal Job Server > RightClick on the server > Destination to File System.
And you can increase the maximun concurrent job value through CMC>Servers>CrystalReportJobServer>Properties.
Regards
Rameez Shaikh

Mac os x server profilemanager is not available outside the local network

Hi,
I have some trouble using the profilemanager. Planed is to install the server for configuring and supporting our iPhone user
Its a mac mini with OS X Server installed. I've just activated the Websites, OpenDirectory and Profilemanager service. I added the Server to our AD and I'am able to choose the User to allow them to log on to the profilmanager. No problems so far.
But then I added a port forwarding to our firewall with this ports -> http://support.apple.com/kb/HT5302?viewlocale=de_DE to the server.
Then I logged on to a external client pc and opened the url forwarded to our ip. The first website with the server logo I got. But if i try to open a subfolder like /profilemanager I get only a white screen without any content. Just a title "Admin" is shown in the browser tab.
Then I tried it with a local client. This client located in the same IP range can open the subfolders without any problems.
Whats the problem here? Just a parameter in the server config that tells him to deny connections from external?
Marcel

Did you set up your ftp clients outside your LAN to use passive FTP.
Active FTP uses a control channel on port 21 and a data channel which is on a non predictive port.
This does not work behind a NAT Router.
Greetings
Martin

server :19000/hfm not available - causing issues

Similar Messages

Maybe you are looking for