Server 2003 backup
i search from the internet and find some recommendation for server 2003 backup solution, i wonder which is better. the only requirment is userfriendly, and cheap of course. i am not intend to put too much energy into this. i know Acronis, Aomei and macrium,
they seem good. are they? is there a possibity to get free edtion for server?
Hi,
We could use NTBackup.exe to back up data for Windows Server 2003. If you just need to back up a single server and the backup device is local, Ntbackup will most likely fit the bill.
For more detailed information, please refer to the links below:
Recommended backup software for windows 2003 server
https://social.technet.microsoft.com/Forums/sharepoint/en-US/24fad745-3aaa-43ec-8210-db106ff88fa7/recommended-backup-software-for-windows-2003-server?forum=winserverfiles
Backing Up and Restoring Data for Windows Server 2003
http://technet.microsoft.com/en-us/library/cc875820.aspx
Preserve Your Data With The Backup Tool You Already Have
http://technet.microsoft.com/en-us/magazine/2005.05.ntbackup.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Windows Server 2003 R2 Backup with Hyper-V in DPM
Hello,
I am trying to backup multiple Windows Server 2003 R2 VMs on Hyper-V (Windows Server 2012 R2) with DPM.
When I try to this I get the following errors:
On the Hyper-V Host:
Source: VSS ID:8229
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
PrepareForSnapshot Event
Context:
Execution Context: Writer
Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Name: Microsoft Hyper-V VSS Writer
Writer Instance ID: {0b5be050-91e2-41a6-9207-414f1291f975}
Command Line: C:\Windows\system32\vmms.exe
Process ID: 5312
Source: Hyper-V-VMMS ID: 18014
Checkpoint operation for 'VMName' was cancelled. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 18012
Checkpoint operation for 'VMName' failed. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 10150
Could not create backup checkpoint for virtual machine 'VMName': Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-Worker ID: 3280
'VMName' could not initiate a checkpoint operation: Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 16010
The operation failed.
The Output of vssadmin list writers on the Hyper-V Host looks like this:
Writer name: 'Microsoft Hyper-V VSS Writer'
Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {0b5be050-91e2-41a6-9207-414f1291f975}
State: [8] Failed
Last error: Non-retryable error
In the Windows Server 2003 R2 VM there are no errors in the eventlog.
Only the information, that VSS is started and stopped after a while.
When I do a Backup with ntbackup of in the VM everything runs fine.
When I create a checkpoint with Hyper-V everything runs fine, too.
The integration services are up to date and get-vmintegrationservice -vmname VMName shows everything is enabled and OK.
On the Hyper-V host there are 13 VMs. 3 of them are running Windows Server 2003 R2 and 2 of them are showing this error. It seems to be no general problem with Windows Server 2003 R2 then.
I tried the backup on a different Hyper-V host with no success.
How can I narrow down the cause of this error?
Thanks.
greets,
torstenThank you to everyone in this thread!
After digging through VSS and Hyper-V dead-ends, the solution above worked for me in a W2012 R2 environment.
I only had this problem trying to back up W2012 R2 Hyper-V VMs stored on a CSV, hosted on a W2012 R2 Host Cluster, backing up from a Host node. I could back up from within the guests fine. Both Windows Server Backup and DPM 2012 R2
gave VSS errors on the cluster hosts.
In fact Windows Server Backup complains with 80780189 it won't back up an application with files on a CSV, which is a common cluster configuration. This is an example of another caveat in a minefield of MS caveats buried in fine print which often negates
configurations touted by MS Marketing, things which sound great on a sell sheet, but in practice are impractical or just not production-ready because of these restrictions.
Disabled Backup in Integration Services, performed an offline back up from DPM 2012 R2 (which did briefly affect serving the workloads on the VM), which succeeded, and then re-enabled Backup in Integration Services. DPM then continued to
sync successfully after that for a day. However, this problem returned after a period of heavy DPM backup activity. So I redistributed backups through various Protection Groups to spread the DPM load over a longer period and this seems to
have solved this problem.
In general I had lots of problems installing, configuring, and now operating DPM, so the experience has not been smooth, but most of the problems have now been solved. I find you have to "baby" this product and not push it too hard,
otherwise things start breaking.
Thanks again everyone!
DPM Error ID 30111 0x800423F4
DPM-EM Event ID 3106 -
Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Josephi have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph -
Oracle Hot Backup Script Windows Server 2003
Hello,
Does anyone here have a working Oracle 10I database hot backup script for Windows Server 2003? If so can you please post it here.
Thanks.Here is a basic batch script I have used for a hot backup of Oracle databases using RMAN
Will just need to update some locations based on you environment just check all the comments and change what you need to but this can be scheduled to run regularly through the windows scheduler for database backups.
This will take a hot backup and backup the archive logs.
Let me know if you have any quesitons.
REM #####################################################################
REM # Name: rman_hot_backup_dsk.bat
REM #
REM # Description:
REM #
REM # Generic Hot backup script that accepts the SID
REM #
REM # Parameters: Instance Name, backup level
REM #
REM #####################################################################
REM #
REM # Check if SID was Passed
if (%1)==() goto USAGE
if (%2)==() goto USAGE
REM # assign ORACLE_SID to passed SID
set ORACLE_SID=%1
REM # Set the hot backup level 0-full 1-incremental
set LEVEL=%2
REM # export the page list
set [email protected]
REM # assign a date we can use as part of the logfile
set DTE=%date:~-4%%date:~4,2%%date:~7,2%_%time:~0,2%%time:~3,2%%time:~6,2%
REM # Take the spaces out of the date string so we can use in our file name
set DTE=%DTE: =%
REM # set the script location
REM # Set location of where you will put script
set SCRIPTLOC=C:\app\oracle\scripts
cd %SCRIPTLOC%
REM # Set the Temporary command file that we will write our rman script to
set CMDFILE=%SCRIPTLOC%\%ORACLE_SID%_rman_hot_backup_dsk.cmd
REM # Remove the temporary file if it exists
del /q %CMDFILE%
REM # Set the logfile directory
REM # Change based on where you want the backup logs to go
set LOGPATH=W:\ORACLE_BACKUP\logs
set LOGFILE=%ORACLE_SID%_rman_hot_backup_dsk_%DTE%.log
set LOG=%LOGPATH%\%LOGFILE%
REM # Set the path of the backup location
REM # Change based on disk pach for you disk based backups
set BACKLOC=\\VirtualBox\ORA_ITS03P\ORACLE_BACKUP\%ORACLE_SID%
REM # Lets set the ORACLE_HOME for the host
REM # Set to your actual ORACLE_HOME location
set ORACLE_HOME=C:\app\oracle\product\10.2.0\db_1
# Set the rest of the Oracle Environment
# based on our ORACLE_HOME
set LIBPATH=%ORACLE_HOME%/lib
set LD_LIBRARY_PATH=%ORACLE_HOME%/lib
set TNS_ADMIN=%ORACLE_HOME%/network/admin
REM #set ORA_NLS10=%ORACLE_HOME%/nls/data
REM Set our PATH with the ORACLE_HOME so that we have a good
REM clean environment to work with
set PATH=%ORACLE_HOME%/bin;%ORACLE_HOME%/OPatch;%PATH%
REM # Write Temporary command file for RMAN backup
echo # configure retention policy >> %CMDFILE%
echo CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 14 DAYS ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # lets start clean for our hot backup by doing full crosschecks >> %CMDFILE%
echo change archivelog all crosscheck ; >> %CMDFILE%
echo crosscheck backup of database; >> %CMDFILE%
echo crosscheck backup of controlfile; >> %CMDFILE%
echo # >> %CMDFILE%
echo # delete all expired and obsolete backups >> %CMDFILE%
echo allocate channel for maintenance type disk ; >> %CMDFILE%
echo delete noprompt expired archivelog all ; >> %CMDFILE%
echo delete noprompt expired backup ; >> %CMDFILE%
echo delete noprompt obsolete ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Configure control file for auto backup >> %CMDFILE%
echo configure controlfile autobackup on ; >> %CMDFILE%
echo CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%BACKLOC%\%ORACLE_SID%_controlfile_%%F' ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Configure default device type here we use disk and set parallelism to 2 >> %CMDFILE%
echo configure default device type to disk ; >> %CMDFILE%
echo configure device type disk parallelism 2 ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Must format the default channel for the device type disk >> %CMDFILE%
echo # other wise tmp area in creating pieces will be done in >> %CMDFILE%
echo # the $ORACLE_HOME/dbs directory >> %CMDFILE%
echo CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT = '%BACKLOC%\%ORACLE_SID%_hot_%%U' ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Configure our retention policy for this database >> %CMDFILE%
echo configure retention policy to recovery window of 14 days ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Let configure our channels for our backup >> %CMDFILE%
echo # Channel 1 disk and we indicate where it goes not taking the default >> %CMDFILE%
echo configure channel 1 device type disk MAXPIECESIZE = 4G format '%BACKLOC%\%ORACLE_SID%_hot_%%U' ; >> %CMDFILE%
echo # Channel 2 disk and we indicate where it goes not taking the default >> %CMDFILE%
echo configure channel 2 device type disk MAXPIECESIZE = 4G format '%BACKLOC%\%ORACLE_SID%_hot_%%U' ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Backup our database with compression on >> %CMDFILE%
echo backup as compressed backupset incremental level %LEVEL% tag hot_%LEVEL%_%DTE% DATABASE ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Backup our archive log files that have not been backed up >> %CMDFILE%
echo backup as compressed backupset format '%BACKLOC%\%ORACLE_SID%_Archive_%%d_%%s_%%p_%%t' archivelog all not backed up 1 times ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # Backup Control file for standby in case needed >> %CMDFILE%
echo backup current controlfile for standby ; >> %CMDFILE%
echo # >> %CMDFILE%
echo # let put a controlfile to trace >> %CMDFILE%
echo sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE' ; >> %CMDFILE%
REM # Run the RMAN backup without using the recovery catalog
%ORACLE_HOME%\bin\rman target=/ nocatalog cmdfile=%CMDFILE% msglog=%LOG%
REM # Remove our temporary command file
del /q %CMDFILE%
REM # Mail Archive backup log
REM # This relies on the free bmail utility
bmail -date -m %LOG% -f [email protected] -s <smtpserver> -t %PAGE_LIST% -a "HOT Backup results"
REM # Goto end of script as we are done
goto END
:USAGE
echo "Must Pass ORACLE_SID and hot backup level as parameters."
goto END
:END -
We are currently running a windows server 2003 environment with a 2003 server being the DC. We have a couple of 2008 r2 servers that are member servers.
OK...
Our users are primarily operating off of windows xp clients/workstations in which they use RDP to connect to the newer member servers that are windows 2008. With their base profile in xp I am using roaming profiles via server 2003. I am looking to begin
upgrading all of the workstations to all-in-one windows7/8 boxes partially because of cosmetic reasons(#weird) and partially because we will eventually begin using the camera options that are in the all-in-one's.
Also..I must do this one at a time as we don't have the money to do a complete overhaul of all client workstations..If that was the case, I could just redo the network and make those members servers the DC and backup DC as well as add a virtual server
in which everyone can access those legacy programs that are still needed...
As you guys know windows 7/8 boxes will not work with server 2003 and roaming profiles. The reason we don't completely upgrade to 2008 r2 environment is because we are still holding on to a legacy program that requires server 2003 and these programs are
vital to our operation.
So..broken down even further...
A: User is part of a 'LocalAdmins' group that makes them automatically a local admin upon any system within our domain.
B: User logs in to windows xp with credentials in which a tailored made per user roaming profile comes up from server 2003
C: User then logs into one of the two terminal servers via RDP with same credentials and accesses new primary application. To access the legacy applications, they merely minimize their RDP session to get back to the windows xp session.
Ultimately..
1. I'd like to begin replacing option B: with windows 7/8 all-in-ones and and have the RDP saved sessions,that talk to the 2008 member servers, as well as, a few vital ie shortcuts automatically come to all users that are apart of that "LocalAdmins
group period.
2. Setup 1 server 2003 box that runs that legacy program and allow everyone access via a Virtual Environment..
3. If they log into a windows xp box, or a windows 7/8 box, I want them to have access to the same icons.
I guess this is a lot to digest, but my question is, what script could I make that would essentially allow uniformity for both my xp workstations and newly added windows 7/8 boxes? What script could I create that would,I guess reside on server 2003, that
brings all the neccessary icons to the users that are apart of that "LocalAdmins" group despite having a windows xp, 7, or 8 workstation?" I don't see what the issue is because a logon script will still be managed by Group Policy and will have to be applied using GP rules. In the end you still have to write the script."
You basically contradicted the smug part of your rant and multiple answers with this statement!!! You just recognized that some sort of script would be necessary if I chose to use it via group policy.
But according to you..
"It is not and has never been done via a script."
Clearly it has a section per user for a "profile path" and a "logon SCRIPT". Which warrants my creation of this post since I have currentely implemented
roaming profiles. That is how I am manipulating what users can have on their desktop because of course, we have different users that have different needs. But out of all the users, there are programs that need to be laced and seen upon immediate login.I
will consult other people as this is only preliminary planning but about half of your statements are completely unwarranted and UNNECESSARY!
This statement also proves your additional inaccuracies...
"All of the profile things are handled by Windows and have nothing to do with scripts. You define all of that in Group Policy."
That's just silly talk. I told you in my initial break down of my scenario in an entirety that I am using "tailored made per user roaming profiles" to control desktop environments not group policies in this case. But you just made an absolute statement in
saying "You define all of that in Group policy" which is completely wrong...
Do me a favor, please don't respond to this post anymore. I'd love to see if any other partner, staff or whatever mind responding. Thank you for your help anyway. I will use what is useful in your post and discard the rest.
Thanks -
Hello, I am migrating a customer from Server 2003 64bit with Exchange 2007 to SBS 2011.
I installed SBS 2011 in Migration mode, The install has completed. But in the SBS console there are no users or computers listed. I have done this migration from SBS 2008 many times and they are always there. But this is the first
time from Server 2003. Also, When I try to open the "Migrate the server program in the console it says that only supports migration from Small business server. I am pretty much stuck at this point as the migration guide doesn't mention
anything like this.
if I go to Active Directory Users and computers they users and computers are there.
BrianI'd use the 2nd link, it seems complete. Its for SB2008 but it should apply to SBS0211 as well. Just make sure you have good backups of the source server in case you need to start over (I'd personally virtualize it and run a test migration).
Just make sure your answerfile was correct when you installed SBS2011. Note because you are coming from server 2003 the standard SBS OU structure won't be there which is why the SBS console won't see the users or computers. You'll need to
fix this up but I'm not sure if you should do it early on or last...
http://titlerequired.com/2013/12/04/quick-fix-sbs-essentials-ou-structure/
-- Al -
Out of memory using Windows Server 2003 and Oracle 9.2.0.3
Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez -
New install ZH77A-G43 with cloned Server 2003 won't boot in Safe mode
Hello,
I just installed a ZH77A-G43 into an existing PC box, new Core i3, new SATA CD and 500G drive, existing tape backup connected to a SCSI card. I cloned the new harddrive into 2 partitions, the first one being a bootable Server 2003. I installed the harddrive on another computer, and the partitions appear to be cloned correctly. When I boot off the new drive in the new hardware computer it gets to the Server 2003 splash screen, and then reboots during processing of acpitabl.dat (this is in Safe mode). I've tried booting from a Server 2003 installation CD, and that also results in a reboot.
I tried removing the SCSI card, and that results in a reboot before the MSI splash screen comes up.
This is the first time I've done a hardware change like this. The MSI instructions were very simple to follow and I was exciding to see the Server 2003 splashscreen after about 30 minutes of hardware installation. But now I'm stuck and request your help.
Regards, PhilipHello xmad,
Thanks for the suggestions. The CD that wouldn't boot is Server 2003 64 bit--no service pacts. I just tried my VISTA CD and it came up and was ready to start the installation. The hardware is
Seagate 500G harddrive connected to SATA2
LG OEM DVDRW 24X internal connected to SATA1
2 sticks of DDR3 2GB 1333MHz
Quantum DLT-V4 tape backup drive connected to SCSI card
PSU is enclosed in a case labeled ANTEC DESIGN and I can't see any infor unless I take apart the enclosure.
I just removed the SCSI card, and the system reboots immediately after 1 second or so of the MSI splashscreen. With the SCSI card in, it reboots during the Server 2003 splashscreen (during processing of acpitabl.dat).
Should this system be compatible with Server 2003 64bit?
Should I next update the BIOS as you previously suggested?
Update: I currectly have BIOS E7758IMS V1.7 -
Migration of Windows Small Business Server 2003 to Windows Server 2012 Essentials
Hi,
I am trying to migrate Windows Small Business Server 2003 to Windows Server 2012 Essentials by following the steps given in the link below:
http://technet.microsoft.com/en-us/library/jj200112.aspx
I have looked at other threads on the forum but none of them have been too helpful.
The issue: When
I run the Migration Preparation Tool on the Source Server, it runs successfully and does not report any errors. However, when I try installing Windows Server 2012 Essentials on the Destination Server, it displays an error that says 'Source
Server not prepared for migration: After you run the Migration Preparation Tool successfully on your source Server, click retry'.
The Source Server has 2 network adapters-one for the local network and the other for connection to the internet and the router is set as the default gateway this adapter.
Since it is mentioned in the documentation - 'configure your Source Server to use one network adapter', I'm wondering if this is the issue and I need to make changes in this configuration?
On running the Microsoft IT Environment Health Scanner tool it
reported an error - 'DNS Server listening on multiple addresses' and a warning ‘Domain Controller listening on multiple addresses’. Both point to the same solution KB 272294 (http://support.microsoft.com/kb/272294).
But it did not remove the errors.
Other steps performed:
As per the steps, I performed a backup, installed recent service packs and synchronized the source server time with external source.
On running the Best Practices Analyser. It shows 3 warnings.
- The threshold for the Allocated Memory alert is set to the default value. However the server has more than 2 GB of RAM installed.
- Microsoft Outlook Client not installed" Text="Microsoft Outlook Client is not installed in the ClientApps folder. You must run Windows SBS integrated setup.
- The MSFW instance should use the latest available service pack for Microsoft SQL Server 2000. The MSFW instance should use the latest available service pack for Microsoft SQL Server 2000.
I also ran the Ran netdiag.exe, dcdiag.exe commands
and no failures were reported.
The Event Viewer does not show any errors.
Not sure to what extent these warnings would affect the migration.
Any help would be appreciated. Thanks!The SBS2003 needs to use one NIC only so you'll need to change that before starting. If it is the premium version and has ISA server installed, that will need to be removed first. See:
http://blogs.technet.com/b/sbs/archive/2011/07/01/sbs-2011-standard-migrations-keys-to-success.aspx
-- Al -
Errors in Unity 4.2(1) after OS upgrade to Windows Server 2003
I upgraded our Unity VM only server to server 2003 and reinstalled Unity 4.2(1) and restored untiy from backup. After the restore there are multiple errors in the Application log. I have engaged two different Cisco TAC people and neither of them could help me in resolving these problems. Makes me lose confidence in Cisco when I can't even get an American based engineer who knows anything about Unity! Hopefully someone here knows something.
Application Log errors below:
CiscoUnity_Notifier - Event ID 1071 and 1023,
Active Server Pages - Event ID 5,
CiscoUnity_ConvSubscriber - Event ID 187,
VBRuntime - Event ID 1,
CiscoUnity_BMsgConnector - Event ID 10005.
DBWalker returns1 error relating to orphaned entries in the GlobalSubscribers table:
*** Check for orphaned GlobalSubscriber table entries ***
1649:(error) 2 invalid rows found in the GlobalSubscriber table
These rows have no corresponding GlobalLocation table entry and are likely 'stranded' in the directory from a previous install.
The following rows were found to be invalid:
Alias=USbms_FLAPK001-T03, SubscriberObjectID={069E45E6-B471-4C7C-A4F1-07EE0248EA25}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}
Alias=Unity_FLAPK001-T03, SubscriberObjectID={A1E42B80-AF4E-42CF-A2D0-12E2BEA862B4}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}I'll have to look into this a bit more but I can tell you what this essentially means. There are 3 main system accounts that Unity sets up when the application is installed (assuming you integrate with Exchange 2003). You actually specify the location for these objects during the permissions wizard and etc. The 2 accounts here are the primary system account for handling outside calls (Unity_) and the account used for failsafe operations (USbms_) - they are the 2 orphaned entries you see. It appears the location specified for these accounts may have been invalid during the reinstall or there was some other yet to be determined issue at play here that caused these accounts to be orphaned which is not good.
When you installed Win2K3 and then reinstalled Unity, did you set up Unity to the exact version and ES that your last DiRT backup was saved at? Also, did you specify the same OU's and etc when you ran the permissions wizard for where to import objects, create objects, and etc.
Can you attach a copy of the installation log and other application logs? I'll try to look further and see if I can be of more assistance.
Hailey
Please rate helpful posts! -
I inherited a Windows Server 2003 R2 standard edition x86. After doing a bit of checking on it, I see it has not been backed up for some time. Drive C is handled by an Adaptec controller card and has 2 drives in Raid 1 configuration with total space of 68.2GB
with 33GB free and fragmentation of 1%. Drive D is handled by a 3Ware controller card and has 9 drives in Raid 5 configuration (8 active, 1 spare) with total space of 7.27TB with 4.65TB free and fragmentation of 1%.
When looking at either drive thru Windows explorer, properties, Shadow Copies tab it shows "Failed to retrieve volumes that are eligible for shadow copies. Error 0x8004230f: The shadow copy provider had an unexpected error while trying to process the
specified operation."
If I check thru command prompt and run vssadmin commands I get the following.
C:\Documents and Settings\Administrator>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Symantec Software VSS Provider'
Provider type: Software
Provider Id: {262b716e-bb23-41b5-aaef-e2c15e767167}
Version: 1.0
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
C:\Documents and Settings\Administrator>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {0a076449-61f7-459b-8288-9684c8a6b860}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {1f5f638e-3bc0-430b-849e-17bf69b42b64}
State: [1] Stable
Last error: No error
Writer name: 'FSRM Writer'
Writer Id: {12ce4370-5bb7-4c58-a76a-e5d5097e3674}
Writer Instance Id: {1ee21ac2-2dd2-450b-87f9-e425b4ee599e}
State: [1] Stable
Last error: No error
Writer name: 'MSDEWriter'
Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
Writer Instance Id: {c8b96527-9328-4ce3-92ac-6efc995dbef5}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {c6e9592a-3a8a-4873-9589-4fb9072f045b}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {0c50faba-aec4-4f76-96ad-d25c0b5066ca}
State: [1] Stable
Last error: No error
Writer name: 'Event Log Writer'
Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
Writer Instance Id: {76fcde0f-d18b-4936-a3f6-1dd399630101}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {5ea9ac74-036c-44f3-bf52-684784c03131}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {f02d80c6-e208-4e9e-9076-3032677fe594}
State: [1] Stable
Last error: No error
C:\Documents and Settings\Administrator>vssadmin list shadows
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
No items found that satisfy the query.
C:\Documents and Settings\Administrator>vssadmin list volumes
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Error: The shadow copy provider had an unexpected error while trying to process
the specified command.
Now if I look in the event log under Applications I see 2 errors showing.
Error 1
Source VSS. Event ID 12302. Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly.
Error 2
Source VSS. Event ID 12293. Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::QueryVolumesSupportedForSnapshots(ProviderId,29,...) [hr = 0x8000ffff].
Checking error 1 event id 12302 is says to make sure COM + is set to Automatic. It is set to automatic and is running. It also says to command prompt vssadmin list writers and verify none are reporting errors. None are reporting an error. It also
says to check volume shadow copy in services. Start up set to manual, which it is and it will run with no problems.
Checking error 2 event id 12293 it says to use vssadmin create shadow for each provider. If I do that I get the same errors.
I have done a lot of research on this and found 3 hot fixes from Microsoft. None of the 3 apply to the error messages that I am getting. But to give it a good try, I have applied all 3 hot fixes and none made it better, and none made it worse (different
error messages). I have also tried the following
cd /d %windir%\\system32
Net stop vss
Net stop swprv
regsvr32 ole32.dll
regsvr32 vss_ps.dll
Vssvc /Register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 Vssapi.dll
regsvr32 Vssui.dll
net start vss
net start swprv
The only errors I get when doing this is the following.
"msxml4.dll not found" I understand this as my system now has msxml6 and in doing some research msxml6 and msxml4 are not compatible and msxml6 replaced msxml4, so I can live with that, I guess.
"Vssapi.dll was loaded, but the DllRegisterServer entry point was not found. The file cannot be registered."
I am at a loss. Does anyone have any suggestionsHi,
Do you install Symantec on your server? If so, please try to remove the entries of Symantec from system to check the result.
In the meantime, please try the steps listed in the following article to see if it can help:
Error message when you run the "vssadmin list writers" command on a Windows Server 2003-based computer: "Error: 0x8000FFFF"
http://support.microsoft.com/kb/940184
Please note, you need to backup the registry before making any changes to it.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??
We are running these tested Mac clients here:
macMini 1.5Ghz 10.4.5
G4 Quicksilver 800Mhz 10.4.4
G4 Dual Mirror PowerMac 10.4.4
They mount volumes on these servers:
Dell Windows Server 2000 (SFM)
Dell Windows Server 2003 (SFM)
Xserve G4 OS 10.3.9 Server
Macs sleep settings are this:
Computer sleep=1 hour
Display sleep=1 hour
Hard drive=sleep
Symptom:
When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
disconnected. Upon wake, the error message stating they were disconnected are waiting.
The Xserve volume is untouched. This should not be a problem
since the Windows servers are running Appletalk via IP not
native Appletalk protocol.
Comments:
Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
Feb 23 13:47:06 M00XXX kernel[0]: System Wake
Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520My SMB share get disconnected while my Powerbook was still running.
Errors in system.log:
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
Anyone else having the same problem? -
Planning to move my datafile from windows server 2003 to windows XP
planning to move my datafiles from windows server 2003 to windows XP
database 10g
Is it possible to follow below the steps for above migration
=====================================-
This is my steps( migrated from windows Xp to windows XP)
Moving oracle Datafile from one server A to B (instance not running) (cold backup)
In server a (cold backup of datafile)
SQL> alter database backup controlfile to trace
Go to udump check the trace file copy these lines
CREATE CONTROLFILE REUSE DATABASE "O10G1" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 454
LOGFILE
GROUP 1 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO01.LOG' SIZE 10M,
GROUP 2 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO02.LOG' SIZE 10M,
GROUP 3 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSTEM01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\UNDOTBS01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSAUX01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\USERS01.DBF'
CHARACTER SET WE8MSWIN1252
Change the new database name jee and REUSE replaced by SET and NORESTLOGS replaced by RESTLOGS above lines.
Save as C1.sql
Stop the oracle instance service in source ( server A)
Copy all the datafile and redlog file put into server B( any folder)
Copy the init.ora file from source and edit
Change the db_name and location of the controlfile
SERVER B
Create the oracle instance using ORADIM
Start the service
C:\ set oracle_sid=instance name
C:\>set oracle_sid=jeeno1
C:\>sqlplus /nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Apr
11 06:44:28 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount
pfile='C:\oracle\product\10.1.0\admin\jeeno\pfile\jeenoinit.ora'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> CREATE CONTROLFILE set DATABASE "jeeno1"
RESETLOGS NOARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 454
7 LOGFILE
8 GROUP 1
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO01.LOG'
SIZE 10M,
9 GROUP 2
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO02.LOG'
SIZE 10M,
10 GROUP 3
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO03.LOG'
SIZE 10M
11 -- STANDBY LOGFILE
12 DATAFILE
13
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSTEM01.DBF',
14
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\UNDOTBS01.DBF',
15
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSAUX01.DBF',
16
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\USERS01.DBF'
17 CHARACTER SET WE8MSWIN1252
18 ;
Control file created.
SQL> alter database open resetlogs;
Database alteredone more thing u can also rename ur database by using nid utility ,So u have no need to recreate the controlfile for changing the name of ur database.just restore all files from primary to new server ,create new service by oradim ,start the instance and then use NID utility.
Thanks
Kuljeet -
Project Server 2003 files to MPP or other format for archive
We want to remove our Project Server 2003, but we have a need to backup all the old projects. Anyone have any documentation on how we can move this to MPP or PDF or other document for easy viewing to archive?
Thanks!Hi, I suggest either to do a full backup of the DB or to save manually the files. Anorher way would be to write a powershell script.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade
Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C. I took
the following steps prior to attempting upgrade.
1. Determined that Server meet the minmum requirements for upgrade.
2. Installed all Windows Updates.
3. Uninstalled McAfee Virus Scan Enterprise Application
4. Backed Up and Imaged Primary Domain Controller.
5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
6. Set Domain Function Level at Windows Server 2003
7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software. The Ugrade ran to last step, application install and failed at
26% complete with the following errror message:
"Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
My questions are why did the upgrade fail? What can we do to ensure the upgrade will succeed next time?
I have incuded the Setuperr.log below.
2014-08-24 08:48:27, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:48:30, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:18, Error [0x08071d] MIG CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException: hResult = 0x0, Line
= 2, Position = 134; . .
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:49:22, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 09:13:05, Error [0x080792] MIG COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:30:13, Error [0x060005] IBS CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
2014-08-24 09:30:13, Error [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
__thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0804b3] MIG CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0802fa] MIG MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]Hi,
Here are some limitation of upgrading:
Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported.
Cross-language upgrades are not supported.
Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
If error occurs, it may be an IO issue.
Best Regards.
Steven Lee
TechNet Community Support
Maybe you are looking for
-
Cannot send emails from Mail- using yahoo email - please help!!
I'm having major problems with my yahoo email in Mail. No matter what settings i seem to use, any emails i send take hours and hours to arrive. I seem to be receiving email, but cannot send- sometimes i get an error message, other times they go into
-
Issue with set and get paramter
Hi all, i am using set parameter id in a module pool program and get parameter id in the FM . say iam passing a value ABC. IN BETWEEN USING THE FM IF I OPEN SE38 THEN I SEE THE VALUE ABC IN THE PROGRAM NAME. is there any thing that i need to do afte
-
Down Payment Request - Printout
Hi All, Could you pls let me know the process/Configuration to print out the Down Payment Request (F-47). Do we needs to to create new form and assign to anywhere in the configuration? Can we print the standard SAP format? If yes pls let me know the
-
Copy and Paste image to clipboard-- color & size adjustments
Hello, I wrote a small program (JDK 1.4.1) which enables the user to copy an image (gif or png) to the clipboard. - when this image is pasted into Microsoft Words, the size is not respected (much bigger), - when it is pasted into Lotus Notes, the col
-
Yikes! Podcast library cleared - by itself!
OK, maybe it's me but I went to the Podcasts link under Library in the viewing pane in iTunes 5.01 today. All the podcasts which had been listed there were gone with one exception - a cast that I added today. What did I do and how did I do it? Sorry