Server 2003 R2 sp2 on IBM T42: is there a work-around for getting bluetooth to work?

I have seen a few forums here and there talking about possible work-arounds for the lack of a bluetooth stack in server 2003, and they have not worked.
The driver here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-50245.html
Installs without compalint, but after reboot, cannot find a bluetooth device. The bluetooth service starts and runs happily.
I found a hack-around solution involving update Q323183 for tricking 2003 into installing a bluetooth stack elsewhere, it also failed to return any results.
Has anyone figured this one out?

welcome to the forum!
i had this working on my T42p back in the day but that was 6 years ago.   it installed using the driver from IBM and the MS BT stack.   i'm about 95% sure i was using the standard version of 2003 which by default includes a BT stack.   enterprise and datacenter do not since there's no logical reason for either one to be running bluetooth due to security risks.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

  • Windows Server 2003 R2 Sp2 Italian Language

    Hi,
    I have a big problem with installation of endpoint security. I installed it on a windows server 2003 R2 sp2 with italian languages and it dosn't works. I read in a post that italian languages is not supported but you are working for a fix. There are news?I need a quickly help to solve this problem!
    Thank you

    Hi there,
    There's a release planned in the near term. However, I don't know for sure if that will include localization as a priority. Have you suggested an enhancement request through http://www.novell.com/enhancement_request/ for getting this fixed?
    If you need to quickly resolve this, maybe you can setup an english (or another supported OS Language) server running into a VM inside a server with italian language and you can make that a temporary install meanwhile italian localization is done.
    >>>
    From: fgastald<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 1/14/2009 1:56 PM
    Subject: Windows Server 2003 R2 Sp2 Italian Language
    Hi,
    I have a big problem with installation of endpoint security. I
    installed it on a windows server 2003 R2 sp2 with italian languages and
    it dosn't works. I read in a post that italian languages is not
    supported but you are working for a fix. There are news?I need a quickly
    help to solve this problem!
    Thank you
    fgastald
    fgastald's Profile: http://forums.novell.com/member.php?userid=8611
    View this thread: http://forums.novell.com/showthread.php?t=356754

  • Cannot run the big size exe file ( 900MB) on Windows Storage Server 2003 x86 SP2 OS(Hyper-V VM machine)

    When I run a big size exe file(>900 MB) on Windows Storage Server  2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
    Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
    This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.).  we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
    Server 2003 x86 SP2 OS VM machine).  So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
    My questions:
    1. Is there the limitation of exe size to run on Windows
    Storage Server  2003 x86 SP2 OS VM machine?  If yes, what is the size of limitation?
    2. What reason is this error? Is it related with Hyper-V?
    Thanks,
    Recky

    Did you install the 2003 VM from scratch or did you create it via a P2V process?  In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things. 
    First thing to check would be Shaon's suggestion to try it in another VM.  If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again.  Better yet, if the application can be run on a later version
    of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
    .:|:.:|:. tim

  • Hyper-V VM Windows Server 2003 R2 SP2 Network Problems

    Hi Guys,
    I am trying to setup a new VM in my lab (I am using windows 8.1 in my host)  with Windows Server 2003 R2 SP2. I already installed the integration services in that VM, the network adapter is ok (Hyper-V network adapter). Well, everything it seems to be
    ok, but my W2K3 Machine keeps getting 169.xxx ip. My host is wireless , the virtual switch is ok, since I have other 4 VM (W2K8, W2K8R2, W2012, W2012R2) working fine with that switch and having access to the internet, just this VM with W2K3 is not working. 
    Do you guys can help ?
    Thanks

    Please check the properties of your NIC adapter in W2K3 if the Client for Microsoft Network is installed.
    And also try to compare the network setting for other VMs NICs in Hyper-V to find the deference.
    I would create new VM and install clean W2K3 for testing.
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
    suggestion in a test environment before implementing!

  • Windows server 2003 64bit SP2 get error

    Hi all,
    When I login my Windows server 2003 64bit SP2, i got an error "Generic Host Process for Win32 Services encountered a problem and needed to close.", I click to see error code infomation and I see below info:
    szAppName : svchost.exe     szAppVer : 5.2.3790.3959     
    szModName : netapi32.dll     szModVer : 5.2.3790.3959     
    offset : 000000000001e626
    Please help me to fix it.
    Thanks and Best Regard.

    This one might help.
    http://support.microsoft.com/kb/931852/en-us
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Work around for server not found problems on FF36

    I have found a work around for all the people having server not found problems with FF36.
    If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
    Preferred: 8.8.8.8
    Alternate: 8.8.4.4
    Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
    Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
    It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
    Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.

    Well done. Thanks for finding that.
    That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
    * Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
    * https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
    With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
    * Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows

  • Cannot Install ADWS on server 2003 Standard SP2

    running server 2003 SP2 - Extended my schema to 2008 no problems. Installed latest RSAT on a windows 7 domain client, cannot connect due to no ADWS service running on my DC.
    I attempted to install the ADWS service and received an error at the point where my netlogon was too low a version.
    After researching I found the hotfix for just this issue (KB969428) and installed the hot fix.
    ADWS (KB968934) fails again - this time it succeeds all prerequisite checks (passing netlogon) up to prerequisite check for System.DirectoryServices.AccountManagement
    After looking in to this, it appears to be looking for a .net component that is newer than 3.5 SP1 - Should I install Beta 4 of .net to resolve this? If so, what are the ramifications of having to uninstall and reinstall .net when v4 final is released? if not, how else can I resolve this issue?
    Below is my KB968934.log - I left the first section in to show where it failed at netlogon, scroll down and you will see netlogon pass the prerequisite check and where my next failure occurs. Thank you in advance for any help you can provide.
    [KB968934.log]
    0.651: ================================================================================
    0.651: 2010/01/16 17:37:13.060 (local)
    0.651: d:\0d7eebb766afefb1aedf7c46cb11\update\update.exe (version 6.3.15.0)
    0.681: Hotfix started with following command line:
    0.732: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    1.002: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    1.002: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    1.002: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    1.062:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    1.072: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    1.072: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    1.092:  C:\WINDOWS\system32\netlogon.dll is Present
    1.162: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    1.162: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    1.162: Condition Check for Line 3 of PreRequisite returned FALSE
    1.182: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    1.182: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    1.242: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    1.242: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    106.604: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    106.604: User Input: OK
    106.604: Update.exe extended error code = 0xf0f4
    106.604: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    3.675: ================================================================================
    3.675: 2010/01/16 18:03:18.466 (local)
    3.685: d:\2f8814c6dfbec22952bc64751eaa77a2\update\update.exe (version 6.3.15.0)
    3.775: Hotfix started with following command line:
    6.169: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    6.920: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    6.920: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    6.920: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    6.940:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    6.950: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    6.950: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    6.950:  C:\WINDOWS\system32\netlogon.dll is Present
    7.080: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
    7.080: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
    7.390:  C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
    8.342: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Less Than 3.5.30729.4126
    8.342: Second Condition in Prereq.CheckSDSAMQFEInstalled.Section Failed
    8.342: Condition Check for Line 4 of PreRequisite returned FALSE
    8.352: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    8.352: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    8.422: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    8.422: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    16.143: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    16.143: User Input: OK
    16.143: Update.exe extended error code = 0xf0f4
    16.143: Update.exe return code was masked to 0x643 for MSI custom action compliance.

    I am having the same issue and have installed the hotfix KB969166. Here is the copy of the error log I get when attempting to install AWGS:
    [KB968934.log]
    0.078: ================================================================================
    0.078: 2010/02/02 10:26:49.836 (local)
    0.094: c:\251d1d890dd68535c298af3983c1\update\update.exe (version 6.3.15.0)
    0.094: Hotfix started with following command line:
    0.109: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.141: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.141: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.141: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.141:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is not Present
    0.141: Fist Condition in Prereq.CheckCLR.Section Failed
    0.141: Condition Check for Line 2 of PreRequisite returned FALSE
    0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.156: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.641: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.641: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    90.641: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    90.641: User Input: OK
    90.641: Update.exe extended error code = 0xf0f4
    90.641: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.062: ================================================================================
    0.062: 2010/02/05 08:58:44.500 (local)
    0.062: c:\4ed2570295ca716c726b4919c4ae0f\update\update.exe (version 6.3.15.0)
    0.062: Hotfix started with following command line:
    0.062: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.109: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.109: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.109: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.109:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.109: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Less Than Specified Value
    0.109: Second Condition in Prereq.CheckCLR.Section Failed
    0.109: Condition Check for Line 2 of PreRequisite returned FALSE
    0.109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.109: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.125: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.765: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.765: User Input: OK
    7.765: Update.exe extended error code = 0xf0f4
    7.765: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.031: ================================================================================
    0.031: 2010/02/05 09:02:02.890 (local)
    0.031: c:\d14fbec512d08ab27235\update\update.exe (version 6.3.15.0)
    0.031: Hotfix started with following command line:
    0.031: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.046: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.046: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.046: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.046:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.046: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Less Than Specified Value
    0.046: Second Condition in Prereq.CheckCLR.Section Failed
    0.046: Condition Check for Line 2 of PreRequisite returned FALSE
    0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.062: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.062: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    28.750: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    28.750: User Input: OK
    28.750: Update.exe extended error code = 0xf0f4
    28.750: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.078: ================================================================================
    0.078: 2010/02/05 09:44:56.662 (local)
    0.078: c:\97a3532a3827cc7ab96ab9d0ef3f309c\update\update.exe (version 6.3.15.0)
    0.094: Hotfix started with following command line:
    0.094: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.125: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.125: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.125: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.125:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.125: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    0.125: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    0.125:  C:\WINDOWS\system32\netlogon.dll is Present
    0.125: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    0.125: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    0.125: Condition Check for Line 3 of PreRequisite returned FALSE
    0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.141: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.141: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    9.359: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    9.359: User Input: OK
    9.359: Update.exe extended error code = 0xf0f4
    9.359: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.078: ================================================================================
    0.093: 2010/02/05 10:11:17.921 (local)
    0.093: c:\3c8ed213a8530cc14dca7e3062\update\update.exe (version 6.3.15.0)
    0.109: Hotfix started with following command line:
    0.109: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.156: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.156: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.156: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.156:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.156: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    0.156: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    0.156:  C:\WINDOWS\system32\netlogon.dll is Present
    0.156: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    0.156: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    0.156: Condition Check for Line 3 of PreRequisite returned FALSE
    0.156: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.156: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.672: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.218: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.218: User Input: OK
    7.218: Update.exe extended error code = 0xf0f4
    7.218: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.047: ================================================================================
    0.047: 2010/02/05 10:18:38.833 (local)
    0.047: c:\fc3b5f814b77142ca5cddbd3df\update\update.exe (version 6.3.15.0)
    0.047: Hotfix started with following command line:
    0.047: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.062: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.062: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.062: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.062:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.078: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    0.078: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    0.078:  C:\WINDOWS\system32\netlogon.dll is Present
    0.078: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    0.078: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    0.078: Condition Check for Line 3 of PreRequisite returned FALSE
    0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.078: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.078: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    3.625: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    3.625: User Input: OK
    3.625: Update.exe extended error code = 0xf0f4
    3.625: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.079: ================================================================================
    0.079: 2010/02/05 10:26:57.505 (local)
    0.079: c:\abb2d8d70e100e3b9b48951c\update\update.exe (version 6.3.15.0)
    0.079: Hotfix started with following command line:
    0.079: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.110: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.110: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.110: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.110:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.110: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    0.110: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    0.110:  C:\WINDOWS\system32\netlogon.dll is Present
    0.110: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    0.110: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    0.110: Condition Check for Line 3 of PreRequisite returned FALSE
    0.110: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.110: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.125: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.625: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    7.625: User Input: OK
    7.625: Update.exe extended error code = 0xf0f4
    7.625: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    0.078: ================================================================================
    0.093: 2010/02/05 10:35:00.550 (local)
    0.093: c:\e789906fc99235197987dcd4b2ab3dc5\update\update.exe (version 6.3.15.0)
    0.093: Hotfix started with following command line:
    0.093: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
    0.140: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
    0.140: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
    0.140: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
    0.140:  SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
    0.140: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
    0.140: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
    0.140:  C:\WINDOWS\system32\netlogon.dll is Present
    0.140: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
    0.140: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
    0.140: Condition Check for Line 3 of PreRequisite returned FALSE
    0.140: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.140: KB968934 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    0.640: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.640: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    12.093: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
    12.093: User Input: OK
    12.093: Update.exe extended error code = 0xf0f4
    12.093: Update.exe return code was masked to 0x643 for MSI custom action compliance.

  • Crystal Reports 9 and Windows Server 2003 sp1/sp2

    Post Author: jnribeyrol
    CA Forum: General
    Hello,
    due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
    I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
    Can somebody help me.
    regards

    CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
    Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
    Thank you
    Don

  • Any problems running BO XI R1 on Server 2003 "R2" / SP2

    Still running BO XI R1 on Server 2003 Standard Edition / SP1 but would like to UPGRADE OS to 2003 "R2" Standard Edition / SP2.   I know R1 is out of support but is anyone running XI/R1 under this OS.  Documentation for R1 only states support for 2003 SP1.   I did open support dialog and they said it should be OK.   Just trying to get a feel if anyone is actually running this configuration in the real world.

    I installed SP2 on all my 2003 VM's for both XIR2 and XI 3.x. There are no issues that I know of everything works fine. SP1 used to cause issues on XIR1 with DEP but form the details you supplied I don't see that as an issue. Do you already have SP1 on 2003? Also you said 2003 R2 (which should be past the DEP patch). If that's the case then no issues that I know of.
    Regards,
    Tim

  • Migrating MOSS from windows server 2003 x64 sp2 to 2008 R2

    Dear All,
    I can't find too much data supporting this issue
    all articles says restore farm / migrate IIS / copy and replace 12 hives
    I don't believe this is so practical
    I need more in depth details like how IIS will be migrated [Should I use web deployment tools]
    what about customized solution that modifies the web.config file and deployed as farm solutions will IIS migration tool override the changes on it
    Thanks for help

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • KB2898860 & KB2901115 Windows Update Fail on Server 2003 Std SP2

    he following updates fail to install on a Windows Server 2003 Standard Edition SP2 file server.
    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2901115)
    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2898860)
    KB2901115 log
    0.453: 2014/03/12 08:22:46.429 (local)
    0.453: C:\WINDOWS\SoftwareDistribution\Download\9d53f804e0198422c019c40c49b12668\update\update.exe (version 6.3.4.1)
    0.453: Failed To Enable SE_SHUTDOWN_PRIVILEGE
    0.453: Hotfix started with following command line: -q -z -er /ParentInfo:5a4383affe66c049ae6dc7084f9ad5a2 
    0.453: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.453:  Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found 
    0.453: Condition Check for Line 1 of PreRequisite returned FALSE 
    0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.469: KB2901115 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
    0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.469: Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
    0.469: Update.exe extended error code = 0xf0f4
    KB2898860.log
    0.359: 2014/03/12 08:22:46.929 (local)
    0.359: C:\WINDOWS\SoftwareDistribution\Download\796443382934bf8f75f7c098c5fe7023\update\update.exe (version 6.3.4.1)
    0.359: Failed To Enable SE_SHUTDOWN_PRIVILEGE
    0.359: Hotfix started with following command line: -q -z -er /ParentInfo:549ffa455131174dba2210fe16739168 
    0.359: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.359:  Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found 
    0.359: Condition Check for Line 1 of PreRequisite returned FALSE 
    0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.359: KB2898860 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
    0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.359: Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
    0.359: Update.exe extended error code = 0xf0f4
    I would really appreciate any help on this matter.
    Kind Regards
    Chris

    From the logfiles you supplied, it appears that SP1 for .NET FW 1.1 is missing.
    These security updates will not install if you don't have SP1 for .NET FW 1.1 installed.
    Check this KB article on information about how to verify if SP1 for .NET FW 1.1 is installed, how to get SP1 for .NET FW 1.1, etc
    http://support.microsoft.com/kb/867460
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade

    Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C.  I took
    the following steps prior to attempting upgrade.
    1. Determined that Server meet the minmum requirements for upgrade.
    2. Installed all Windows Updates.
    3. Uninstalled McAfee Virus Scan Enterprise Application
    4. Backed Up and Imaged Primary Domain Controller.
    5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
    6. Set Domain Function Level at Windows Server 2003
    7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
    8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
    Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software.  The Ugrade ran to last step, application install and failed at
    26% complete with the following errror message:
    "Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
    My questions are why did the upgrade fail?  What can we do to ensure the upgrade will succeed next time?
    I have incuded the Setuperr.log below.
    2014-08-24 08:48:27, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:48:30, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:18, Error      [0x08071d] MIG    CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException:  hResult = 0x0, Line
    = 2, Position = 134; . .
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:49:22, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 09:13:05, Error      [0x080792] MIG    COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:30:13, Error      [0x060005] IBS    CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
    2014-08-24 09:30:13, Error      [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
    __thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0804b3] MIG    CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0802fa] MIG    MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]

    Hi,
    Here are some limitation of upgrading:
    Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported. 
    Cross-language upgrades are not supported.
    Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
    We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
    For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
    http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
    Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
    If error occurs, it may be an IO issue.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Work around for iPhone POP3 Server Problems

    A common problem that people seem to be having (checking other discussion forums) is that once an e-mail account is active on the iPhone, they have real problems sending e-mails for that account from their Mac or PC. I had that problem too. After some technical research, here is the cause:
    1. Your e-mail service provider's POP3 server runs a simple UNIX protocol that only allows a single client to access it at a time - i.e. the PC/MAC mail client or the mobile device, but never both at the same time.
    2. Provided that the PC/MAC mail client and the mobile mail client don't access the POP3 server too often and that they are quick, then it's not a problem.
    3. If they check too often or are slow to release the POP3 server, then obviously the probability of clashes and lockouts increases.
    4. There is quite a bit of discussion on the web that points to the iPhone not releasing the POP3 server quickly - in fact it can hang on for a long time
    5. This results in the PC e-mail client reporting incorrect password constantly, driving you nuts (that's tech talk)
    BUT HERE IS A SIMPLE, FLAWLESS WORKAROUND:
    1. You create a new e-mail account for myself (either with your existing provider, or a free provider like gmail)
    2. You configure your main e-mail account to send a copy of incoming e-mails to that new e-mail account (whilst retaining a copy for the main account) - most paid service providers will let you do this.
    3. You do NOT set that new account up on your PC/MAC e-mail client, only on your iPhone. When you do that, in the POP Account Information" panel, you use your main e-mail address and not your new, duplicate address. In the "Incoming MAil Server" section of the set up, you use the username/password of the new, duplicate account. That way you receive stuff from that account, but when you send, it comes from your main account. Cool huh?!
    4. That way, it doesn't matter how long the iPhone hangs on to the account - it's simply a duplicate account that no other client comes along to access. Ever.
    5. Outgoing mail is not a problem, since this fault does not exist with the SMTP server protocol, only with the incoming POP3 server.
    ENJOY!

    Hi Jeff
    Well Jeff, I must bow my head in shame.  I've had this love and  hate relationship with Adobe for many years, and don't even mention the name Matrox in the same sentence or I will go off the wall! However, this is apparently operator error.  Man do I feel like an idiot!  (Sorry Adobe for being so nasty with you.  Peace!) 
    The bottom line is, Black Magic does not, and has never claimed to support Encore.
    If I would of read all of the installation instructions I would of seen that.  Here is a list of the 3rd party software that the Intensity pro does support.  I've seen this list several times, but never really looked for Encore in that list of apps.  I guess I just assumed that if it worked in Premiere Pro, that it would also work in Encore especially Since Encore is Married to Premiere Pro.  Then the other thing that helps to confuse the issue is that Black Magic is one of the external options which show up inside Encores Audio/Video output preferences.  One would just assume if it showed up there, that it should work, but that's not the case.
    Third Party Software Support
    • Apple Final Cut Pro 7
    • Apple Motion 4
    • Apple Soundtrack Pro 3
    • Apple Color 1.5
    • Apple DVD Studio Pro 4
    • Apple Final Cut Pro 6.0.5
    • Apple Motion 3.0.2
    • Apple Soundtrack Pro 2.0.2
    • Apple Color 1.0.2
    • Apple DVD Studio Pro 4.2.1
    • Adobe After Effects CS4
    • Adobe Photoshop CS4
    • Adobe Premiere Pro CS3 v3.2
    • Adobe After Effects CS3 8.0.2
    • Adobe Photoshop CS3 10.0.1
    • Steinberg Nuendo 3.2
    • Digidesign Pro Tools 8
    The Intensity pro works fine for an HDMI output device inside of Final Cut though, sure with it would would work in Encore.  I called and spoke with Black Magic Support, they confirmed that I was a idiot.  Oh well, there's always a chance I may not be wrong, got to check it out!  LOL

  • Slow work Oracle 10gR2 on Windows server 2003 Standart SP2

    Hi!
    I have a problem when i migrating from my old server to new one..
    Old server:
    Windows 2003 SP2 + Oracle 10gR2
    CPU Pentium 4 2.4
    RAM 2 GB
    DISK 2 x RAID 1 (one for systen and instance another for data files)
    On this system i have disk I/O about 35 - 45 mb per sec.
    New server:
    Windows 2003 SP2 x86 + Oracle 10gR2 x86
    CPU 2 x Xeon Dual Core 1.6
    RAM 4 GB
    DISK 1 x RAID 1(system and instance) 1 x RAID 10 (4 disks SATA) (data files).
    When i create tablespace i have disk I/O (EM) about 35 mb/sec and when i try to load data in my new databae (i am using Data Pump import) i have I/O 1 mb/sec. How can i solve this problem?
    When i runing Sisoft Sandra i get a result ~100mb/sec. But the ORION get me a very small result aproximetly the same as in old server.

    I don't think that this is the place to ask about downloads external to OTN. See forum description. Questions about the patches from Metalink (after searching/reading existing Notes and still not coming up with a definitive answer) should in general be directed to Metalink (e.g. open a SR).
    With that said.. If you are asking on how to retrieve the patch set via Metalink interface, then you should turn to Patches & Updates (one of the main tabs). Use e.g. Simple Search or Quick Links to the Latest... to drill down.
    When you have found a patch set, the Patch Set readme documents system requirements and other vital information.
    If you are looking for other information regarding patches and patching, the first place to look is again Metalink. Certification and supportability information can be found via Certify tab. There are several "tactical" Notes such as 161549.1 and 316900.1 useful for supporting your own procedures and for finding further information.
    Edited by: orafad on Aug 24, 2008 12:39 PM

  • Oracle 10.2.0.1 Standard Edition on Windows Server 2003 R2 SP2 German vers.

    Hi,
    We got a "strange" error installing Oracle db on MS win Ser 2003. When the installation procedure created the database it stopped with Ora-604 and Ora-2248. My first thought was the language problem but I'm not sure.
    Below you'll see the trace.log
    If anyone can give me a clue, it would most appreciated !
    Thanks a lot,
    Jacques
    [main] [12:33:57:652] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [12:33:57:652] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [12:33:57:668] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [12:33:58:73] [Host.checkOPS:2053] Inside checkOPS
    [main] [12:33:58:73] [Host.checkOPS:2065] Trying to check cluster existence
    [main] [12:33:58:120] [Library.getInstance:95] Created instance of Library.
    [main] [12:33:58:120] [Library.load:195] Loading orauts.dll...
    [main] [12:33:58:120] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:120] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:120] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [12:33:58:120] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading MSVCR71.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orawsec10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orasrvm10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [12:33:58:136] [WindowsSystem.regKeyExists:997] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [12:33:58:183] [WindowsSystem.getCSSConfigType:1154] configType=null
    [main] [12:33:58:183] [Host.checkOPS:2071] cluster existence:false
    [main] [12:33:58:183] [Host.checkOPS:2109] Cluster installed=false
    [main] [12:33:58:292] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [12:33:58:292] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [12:33:58:292] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [12:33:58:292] [InitParamHandler.endElement:526] distributing Memory: 858993049
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [12:33:58:292] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [12:33:58:308] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [TemplateManager.parseCloneTemplate:1474] See for any transportable datafiles in TemplateManager.....
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7177] setupOIDCommandlineParameters:
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7178] m_regWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7179] m_unregWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7180] m_updateDirService: false
    [main] [12:33:58:308] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [12:33:58:308] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:1950] updateDatafiles:datafileDir=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=1
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo01.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=2
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo02.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=3
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo03.log
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [12:33:58:323] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [12:33:58:339] [OracleHome.isRacEnabled:147] bRacOn = false
    [main] [12:33:58:354] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [12:33:58:479] [Host.executeSteps:4042] Executing steps....
    [main] [12:33:58:479] [Host.setUpForOperation:2918] setUpForOperation: Mode = 128
    [main] [12:33:58:479] [Host.executeSteps:4184] setupForOperation returned: true
    [main] [12:33:58:479] [Host.createStepSQLInterface:5946] sid =Rainbow
    [main] [12:33:58:495] [SQLEngine.getEnvParams:424] NLS_LANG: GERMAN_SWITZERLAND.WE8MSWIN1252
    [main] [12:33:58:495] [SQLEngine.initialize:241] Execing SQLPLUS/SVRMGR process...
    [main] [12:33:58:510] [SQLEngine.initialize:269] m_bReaderStarted: false
    [main] [12:33:58:510] [SQLEngine.initialize:273] Starting Reader Thread...
    [Thread-3] [12:33:58:901] [StepContext$ModeRunner.run:2458] ---- Progress Needed:=true
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-3] [12:33:59:88] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [InitParamAttributes.sortParams:3525] m_sortOn:-1 sortOn:4
    [Thread-3] [12:33:59:244] [OracleHome.isRacEnabled:147] bRacOn = false
    [Thread-3] [12:33:59:244] [Host.noEntryinOratab:5113] Check made for oratab arg passed............
    [Thread-3] [12:33:59:244] [Oradim.getAddEntryCommand:353] AddEntry=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, RAINBOW, -startmode, manual, -spfile]
    [Thread-3] [12:34:0:492] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, RAINBOW, -startmode, auto, -srvcstart, system]
    [Thread-3] [12:34:0:680] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-3] [12:34:0:742] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@898540
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\Programme\oracle\product\10.2.0/flash_recovery_area
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1743] old Spool = null
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1744] Setting Spool = D:\Programme\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\Rainbow\CloneRmanRestore.log
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1745] Is spool appendable? --> true
    [Thread-3] [12:34:1:476] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\Programme\oracle\product\10.2.0/admin/Rainbow/pfile/init.ora
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@898540:messageHandler
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:431] ORA-00604: error occurred at recursive SQL level 1
    ORA-02248: invalid option for ALTER SESSION
    :msg
    ************************************************************

    Yes, there's a known problem, not with german language, but with territory Switzerland, see on metalink:
    ORA-604 / ORA-02248 WITH NLS_LANG SET TO TERRITORY SWITZERLAND
    Doc ID: 334481.1
    ORA-02248 is only the last error, you have others:
    StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01092
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01034
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-03114
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-12560
    Thread-3 12:33:59:88 StepErrorHandler.setIgnorableErrors:250 setting Ignorable Error: ORA-01109
    Not sure whether this related to the same problem. As a workaround you may change the territory, for example to GERMANY. If that works you hit the bug mentioned in the metalink not. Normally NLS_LANG is set in the registry.
    Werner

Maybe you are looking for