Server 2008 Cluster - OSX 10.5.5
Hi
I am creating a Windows Server 2008 HA filesystem cluster which has been setup and is working perfectly. I have a OSX 10.5.5 build laptop running and trying to access the shares on the cluster. It can successfully ping/see/connect to the cluster and authenticate correctly, yet after all of that no shares are published
I have the NFS protocol enabled and have tried sharing using both SMB and NFS, and the mac client is not able to connect. Ive tried connecting over cifs:// smb:// nfs:// through DNS and through IP, but all return the same problem
Ive looked around and it seems this is not an uncommon situation but does anyone have any tips/clues/etc to solve this?? Apple...anyone??
Its not mission critical for my mac clients to use these filesystem but it would (and should work) be ideal for 100% interoperability and get my osx clients viewing the same files as the windows people
Any thoughts?
To anyone who is having this issue:
I found a resolution in a Microsoft forum, and the resolution comes from Apple
Connect using the following method:
smb://netbiosname:139/sharename
Hopefully this issue will be permanently fixed in future Apple updates or MS KB articles
Message was edited by: thelostwayfarer
Similar Messages
-
Prepositioning files on a Server 2008 Cluster
I recently replaced a Server 2003 cluster with a server 2008 cluster. After the migration my prepostioning stopped functioning. The virtual servers are named the same and all the credentials, etc are the same. If I go into one of the preposition definitions and click browse I get a could not access cifs://<servername>. If I point to any of the other servers I am able to browse. Doesn't matter if they are server 2003 or 2008. The clustered servers are domain controllers. The version is 4.1.1c
Could you elaborate on this,as I am having the same issues? Our prepositioning works on the 2003 boxes but not the new 2008 ones.
Where abouts did you turn off the server signing .My serevr team say they have done this,but i would like to check myself.Is there anything else you changed? I can browse the files and select them fine,its just that once the schedule has started,no files get copied.
thanks,
Nick -
Failover of ASCS takes very long on a Windows Server 2008 Cluster
Hello everybody,
I have configured a ABAP SCS (NetWeaver 7.0) running on a Windows Server 2008 Cluster. The database runs on SQL Server 2008 which is also configured for use in the MSCS. The ASCS and the database run fine in the Cluster. So far so good.
When I want to move the SAP Group which contains the ASCS from on node the other node, then the failover will take very long (approximately 2-3 minutes). The Service of the group will go offline in a few seconds, but the Instance needs about 1 minute to go offline and on the other node it needs more then one minute to become online.
The failover of the databaseinstance will take only about 10 seconds.
Have you got any ideas why the failover of the SAP Group will take so long?
Thanks for your help in advance!
Kind Regards,
WolfgangOne minute would be somewhat long if you are running a faster server and just the ABAP environment. But I've seen ABAP/JAVA systems take up to 10 minutes to restart on a win 2005 clustered system.
Have you looked through the developer traces?
J. Haynes -
Apply monthly Windows 2008 r2 updates within SQL Server 2008 cluster
Hello is applying Windows updates within 2 node SQL Server 2008 cluster (active-passive) as simple as download/install the windows update on the passive node, then failover, then apply on other node, and then fail back over ?...or are there other needed/recommended
steps ? Thanks in advance.Thanks for your reply Shanky_621 much appreciated.
In your link provided http://support.microsoft.com/kb/174799 it looks like the steps order is slightly different from this link of
http://technet.microsoft.com/en-us/library/cc731291.aspx which mentions...
"...where the recommended sequence is to move all services and applications off of the node, pause the node, then apply software updates to the node."
...does it matter which is done first ('Pause' or 'move Services/Application') or can I simply go to the Passive node (say 'B' where there are no Services or Applications currently on it), 'Pause' it, apply the Windows updates, then 'Resume' it, &
reboot ? -
Oracle 10g R2 whitout RAC in a cluster hw (Windows Server 2008 cluster)
Hi,
Is this possible?
I ask it 'cause my customer wants to improve this solution.
I know that Oracle 10gR2 vs Windows Server 2008 is not supported and Oracle Standalone vs Hardware Cluster, neither too, but it's possible or will be a source of big problems?
Thanks in advance.
JRC.Hi lain;
Please check Re: oracle10g on linux cluster
In my issue we were working on linux cluster. Our aim is
we have 3 server and they are linux cluster OS level. Let us call those server A,B and C... We want to make oracle10g works on server A and when server A is gone oracle10g on B server take place of A, if server B gone too, oracle10g on C server take place of B.... In each server we had different numver of database. I mean on machine a we have 3 database, on server B we have 4 database and on server C we have 7
What i do for this:
1. I install 10g database software only (not created database)
2. using netca and create listener for each database
3. using dbca and create database for each server.While on dbca wizard i gave SAN path for dbf
4. Linux admin arrange all other stuff(I mean when db1 on server A crash server B take responsibility of Server A and db1 keep working)
I hope it helps you
Regard
Helios -
Server 2008 Cluster Random failover occuring on Fileserver Resource
We have a 2 node active/passive 2008 Sql Cluster that also has a fileshare on it that randomly fails over. We get events
Events from Cluster Admin
Event ID 1230
cluster resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' (resource type '', DLL 'clusres.dll') either crashed or deadlocked. The Resource Hosting Subsystem (RHS) process will now attempt to terminate, and the resource will be marked to run in a separate monitor.
Event2
EventID 1146
the cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor.
Event 3
EventID 1069
Cluster resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' in clustered service or application 'SQL Server (SQLPRODA)' failed.
Event 4
Event ID 1205
The Cluster service failed to bring clustered service or application 'SQL Server (SQLPRODA)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
We have updated the NIC drivers on each node, the Drivers and Bios have been updated on the HBA's. We have updated the srv.sys and the srv2.sys files thinking it might be an SMB issue. TCP offloading is disabled on the the Nics. We are running SP2 on both nodes and all the windows updates are current. In the cluster logs we are seeing what is listed below.
HYSQL02
========
00000cc8.00001364::2010/02/17-18:23:32.352 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:24:32.353 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:25:32.356 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:26:32.414 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ImportFiles), status 2114. Tolerating...
00000cc8.00001364::2010/02/17-18:29:32.369 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:32:32.431 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000cc8.00001364::2010/02/17-18:35:32.387 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:37:32.392 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:42:32.408 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:43:32.410 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:44:32.425 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:48:32.798 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:51:32.949 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:54:33.045 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-18:58:33.158 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000cc8.00001364::2010/02/17-19:01:33.192 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000cc8.00001364::2010/02/17-19:05:33.166 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:10:33.182 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:11:33.184 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:13:33.190 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:22:33.218 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:26:33.229 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:27:33.232 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:28:33.236 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:29:33.238 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ImportFiles), status 64. Tolerating...
00000cc8.00001364::2010/02/17-19:30:33.241 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ReportImages), status 64. Tolerating...
00000cc8.00000cd4::2010/02/17-19:30:34.000 ERR [RHS] RhsCall::DeadlockMonitor: Call ISALIVE timed out for resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)'.
00000cc8.00000cd4::2010/02/17-19:30:34.000 ERR [RHS] Resource FileServer-(MSCS3)(Cluster Disk 4- Database) handling deadlock. Cleaning current operation and terminaiting RHS process.
000009ec.0000174c::2010/02/17-19:30:34.000 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'FileServer-(MSCS3)(Cluster Disk 4- Database)', gen(0) result 4.
000009ec.0000174c::2010/02/17-19:30:34.000 INFO [RCM] rcm::RcmResource::HandleMonitorReply: Resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' consecutive failure count 1.
000009ec.0000174c::2010/02/17-19:30:34.002 ERR [RCM] rcm::RcmMonitor::RecoverProcess: Recovering monitor process 3272 / 0xcc8
000009ec.0000174c::2010/02/17-19:30:34.004 INFO [RCM] Created monitor process 2248 / 0x8c8
000008c8.000010c8::2010/02/17-19:30:34.019 INFO [RHS] Initializing.
000009ec.0000174c::2010/02/17-19:30:34.030 INFO [RCM] rcm::RcmResource::ReattachToMonitorProcess: (FileServer-(MSCS3)(Cluster Disk 4- Database), Online)
000009ec.0000174c::2010/02/17-19:30:34.030 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) Initializing-->OpenCallIssued.
000009ec.0000174c::2010/02/17-19:30:34.030 INFO [RCM] rcm::RcmGroup::ProcessStateChange: (SQL Server (SQLPRODA), Online --> PartialOnline)
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) Online-->ProcessingFailure.
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] rcm::RcmGroup::ProcessStateChange: (SQL Server (SQLPRODA), PartialOnline --> Failed)
000009ec.0000174c::2010/02/17-19:30:34.055 ERR [RCM] rcm::RcmResource::HandleFailure: (FileServer-(MSCS3)(Cluster Disk 4- Database))
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] resource FileServer-(MSCS3)(Cluster Disk 4- Database): failure count: 1, restartAction: 2.
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] Will restart resource in 500 milliseconds.
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) ProcessingFailure-->[Terminating to DelayRestartingResource].
000009ec.0000174c::2010/02/17-19:30:34.055 INFO [RCM] rcm::RcmGroup::ProcessStateChange: (SQL Server (SQLPRODA), Failed --> Pending)
000008c8.00001784::2010/02/17-19:30:34.112 INFO [RES] File Server : FileServerDoTerminate: Terminate called... !!!
000009ec.0000126c::2010/02/17-19:30:34.119 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000009ec.0000174c::2010/02/17-19:30:34.619 INFO [RCM] Delay-restarting FileServer-(MSCS3)(Cluster Disk 4- Database) and any waiting dependents.
000009ec.0000174c::2010/02/17-19:30:34.619 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) DelayRestartingResource-->OnlineCallIssued.
000009ec.0000126c::2010/02/17-19:30:34.620 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'FileServer-(MSCS3)(Cluster Disk 4- Database)', gen(1) result 997.
000009ec.0000126c::2010/02/17-19:30:34.620 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) OnlineCallIssued-->OnlinePending.
000008c8.000016cc::2010/02/17-19:30:34.657 INFO [RES] File Server : Shares 'are being scoped to virtual name MSCS3
HYSQL01
=========
000015ac.00001200::2010/02/17-21:42:54.976 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-21:47:51.082 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-21:51:51.094 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-21:56:51.056 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000015ac.00001200::2010/02/17-22:06:51.139 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:09:51.148 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000009e0.00001b08::2010/02/17-22:17:51.431 INFO [NM] Received request from client address 10.1.0.220.
000015ac.00001200::2010/02/17-22:21:51.184 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:25:31.804 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:30:34.959 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000015ac.00001200::2010/02/17-22:31:36.518 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:34:41.036 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:39:48.514 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000015ac.00001200::2010/02/17-22:42:51.247 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000009e0.0000132c::2010/02/17-22:44:16.801 INFO [NM] Received request from client address 10.1.0.220.
000015ac.00001200::2010/02/17-22:47:51.209 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000015ac.00001200::2010/02/17-22:49:51.215 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
000009e0.000015f4::2010/02/17-22:51:27.511 INFO [NM] Received request from client address 10.1.0.220.
000015ac.00001200::2010/02/17-22:52:51.277 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-22:55:51.286 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-23:06:51.319 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000015ac.00001200::2010/02/17-23:12:51.284 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000015ac.00001200::2010/02/17-23:13:51.340 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 2114. Tolerating...
000015ac.00001200::2010/02/17-23:16:51.349 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
2nd Issues
000018f0.0000137c::2010/02/16-18:03:23.988 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:07:23.947 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:11:23.959 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:13:23.965 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:14:24.021 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:20:23.986 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:23:23.996 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:26:24.005 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:27:24.007 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:28:24.063 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:37:24.038 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:38:24.094 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:41:24.102 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:44:24.059 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:50:24.129 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-18:54:24.089 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:55:24.091 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:56:24.095 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-18:57:24.151 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ImportFiles), status 2114. Tolerating...
000009e0.00000d2c::2010/02/16-19:13:04.903 INFO [NM] Received request from client address 10.1.0.220.
000018f0.0000137c::2010/02/16-19:18:24.213 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
000018f0.0000137c::2010/02/16-19:22:24.172 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
000018f0.0000137c::2010/02/16-19:24:24.178 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
000018f0.000012dc::2010/02/16-19:25:25.000 ERR [RHS] RhsCall::DeadlockMonitor: Call ISALIVE timed out for resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)'.
000018f0.000012dc::2010/02/16-19:25:25.000 ERR [RHS] Resource FileServer-(MSCS3)(Cluster Disk 4- Database) handling deadlock. Cleaning current operation and terminaiting RHS process.
000009e0.00000f48::2010/02/16-19:25:25.000 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'FileServer-(MSCS3)(Cluster Disk 4- Database)', gen(1) result 4.
000009e0.00000f48::2010/02/16-19:25:25.000 INFO [RCM] rcm::RcmResource::HandleMonitorReply: Resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' consecutive failure count 1.
000009e0.00000f48::2010/02/16-19:25:25.002 ERR [RCM] rcm::RcmMonitor::RecoverProcess: Recovering monitor process 6384 / 0x18f0
000009e0.00000f48::2010/02/16-19:25:25.003 INFO [RCM] Created monitor process 6020 / 0x1784
00001784.00001b1c::2010/02/16-19:25:25.012 INFO [RHS] Initializing.
000009e0.00000f48::2010/02/16-19:25:25.023 INFO [RCM] rcm::RcmResource::ReattachToMonitorProcess: (FileServer-(MSCS3)(Cluster Disk 4- Database), Online)
000009e0.00000f48::2010/02/16-19:25:25.023 INFO [RCM] TransitionToState(FileServer-(MSCS3)(Cluster Disk 4- Database)) Initializing-->OpenCallIssued.
000009e0.00000f48::2010/02/16-19:25:25.023 INFO [RCM] rcm::RcmGroup::ProcessStateChange: (SQL Server (SQLPRODA), Online --> PartialOnline)
3)
00000d80.00000388::2010/02/16-12:15:13.281 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000d80.00000388::2010/02/16-12:19:19.253 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:24:22.132 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:25:22.187 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 2114. Tolerating...
00000d80.00000388::2010/02/16-12:29:22.146 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:42:22.185 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:50:22.209 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:51:22.212 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:53:22.218 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-12:54:22.274 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ImportFiles), status 2114. Tolerating...
00000d80.00000388::2010/02/16-13:01:31.308 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000d80.00000388::2010/02/16-13:10:22.322 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 2114. Tolerating...
00000d80.00000388::2010/02/16-13:13:22.279 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-13:17:22.291 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-13:20:22.300 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00000d80.00000388::2010/02/16-13:22:22.305 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00000d80.00000388::2010/02/16-13:24:22.311 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00000d80.00000d8c::2010/02/16-13:24:23.000 ERR [RHS] RhsCall::DeadlockMonitor: Call ISALIVE timed out for resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)'.
00000d80.00000d8c::2010/02/16-13:24:23.000 ERR [RHS] Resource FileServer-(MSCS3)(Cluster Disk 4- Database) handling deadlock. Cleaning current operation and terminaiting RHS process.
000009e0.000015dc::2010/02/16-13:24:23.000 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'FileServer-(MSCS3)(Cluster Disk 4- Database)', gen(0) result 4.
000009e0.000015dc::2010/02/16-13:24:23.000 INFO [RCM] rcm::RcmResource::HandleMonitorReply: Resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' consecutive failure count 1.
000009e0.000015dc::2010/02/16-13:24:23.002 ERR [RCM] rcm::RcmMonitor::RecoverProcess: Recovering monitor process 3456 / 0xd80
4)
00001770.00001594::2010/02/09-16:01:06.362 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ReportImages), status 2114. Tolerating...
00000aa4.0000183c::2010/02/09-16:01:15.630 INFO [RES] Physical Disk: HardDiskpGetDiskInfo: Disk is of type MBR, signature 0x3ba33338
00000aa4.0000183c::2010/02/09-16:01:19.036 INFO [RES] Physical Disk: HardDiskpGetDiskInfo: Disk is of type MBR, signature 0x3ba3333f
00000aa4.0000183c::2010/02/09-16:01:19.040 INFO [RES] Physical Disk: HardDiskpGetDiskInfo: Disk is of type MBR, signature 0x3ba3333a
00000aa4.0000183c::2010/02/09-16:01:19.044 INFO [RES] Physical Disk: HardDiskpGetDiskInfo: Disk is of type MBR, signature 0x3ba33339
00001770.00001910::2010/02/09-16:05:06.311 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, HelpSystem), status 64. Tolerating...
00001770.00001910::2010/02/09-16:06:06.314 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, ImportFiles), status 64. Tolerating...
00001770.00001910::2010/02/09-16:07:06.317 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_HelpSystem), status 64. Tolerating...
00001770.00001910::2010/02/09-16:08:06.320 WARN [RES] File Server : Failed in NetShareGetInfo(MSCS3, PreProd_ImportFiles), status 64. Tolerating...
00001770.00000d14::2010/02/09-16:08:07.000 ERR [RHS] RhsCall::DeadlockMonitor: Call ISALIVE timed out for resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)'.
00001770.00000d14::2010/02/09-16:08:07.000 ERR [RHS] Resource FileServer-(MSCS3)(Cluster Disk 4- Database) handling deadlock. Cleaning current operation and terminaiting RHS process.
000009f0.00001324::2010/02/09-16:08:07.000 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'FileServer-(MSCS3)(Cluster Disk 4- Database)', gen(4) result 4.
000009f0.00001324::2010/02/09-16:08:07.000 INFO [RCM] rcm::RcmResource::HandleMonitorReply: Resource 'FileServer-(MSCS3)(Cluster Disk 4- Database)' consecutive failure count 1.
000009f0.00001324::2010/02/09-16:08:07.002 ERR [RCM] rcm::RcmMonitor::RecoverProcess: Recovering monitor process 6000 / 0x1770
000009f0.00001324::2010/02/09-16:08:07.003 INFO [RCM] Created monitor process 4748 / 0x128c
Analysis
We are getting Error 64 and 2114 and the File share is failing with a Deadlock Error
Status 64 = the specified network name is no longer available.
Status 2114 = The Server service is not started.
We setup Netmon and ran traces yesterday when the issue happened and they did not show anything. The Server service does not seem to get any errors.
We have also engaged EMC into the issue and MS has escalated the case but wanted to see if anyone else has experienced this issue or found any resolution. We have run out of options.Here you go!
KB950811
why not this one:
http://support.microsoft.com/kb/2231728
/* Server Support Specialist */ -
SCOM 2012 SP1 SQL Server 2008 R2 Clustering Monitoring?
We have a new print management system that was setup using SQL server 2008 R2 clustering. Right now we have SQL MP (monitoring)(discover) 6.3.173.1. They had a failover occur a week ago and SCOM didnt throw any alerts. As a temporary
fix, I found some correlated events and setup a monitor for those events on the servers. However, the system owner wants to know if there is a MP that will monitor for a SQL cluster failover event. I have looked and looked and cant seem to find
anything that gives a whole lot of detail on this.
Thanks
EFD
Warm Fuzzies!Yes, you can monitor SQL Cluster 2008 using SCOM 2012 SP1. but you need to install SQL MP and Windows Cluster MP and Enable proxy Agent on physical nodes.
You can refer below link {it's same for SCOM 2012}
http://blogs.technet.com/b/birojitn/archive/2010/04/14/sql-server-2008-cluster-monitoring.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Hi!
The setup process fails with this error:
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
I have found some hints by google, but nothing really helpfull.
Has anyone had a simular problem when installing SQL server 2008 R2?
All posts I found are about sql server 2008 (no R2!).
The cluster itself is working (storage, network, msdtc, quorum...).
Any hints?
Andreas
Here is the complete log:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2067791871
Exit facility code: 1216
Exit error code: 1
Exit message: Failed: see details below
Start time: 2012-04-06 11:23:57
End time: 2012-04-06 12:01:21
Requested action: InstallFailoverCluster
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x625969A3%400x294A9FD9
Cluster properties:
Machine name: OC-SQLCL02ND01
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine name: OC-SQLCL02ND02
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine Properties:
Machine name: OC-SQLCL02ND01
Machine processor count: 32
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: G:\x64\setup\
Installation edition: STANDARD
Slipstream: True
SP Level 1
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: MANAGEMENT\sqladmin
AGTSVCPASSWORD: *****
ASBACKUPDIR: S:\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: S:\OLAP\Config
ASDATADIR: S:\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: S:\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: MANAGEMENT\sqladmin
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: MANAGEMENT\administrator
ASTEMPDIR: S:\OLAP\Temp
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
CUSOURCE:
ENU: True
ERRORREPORTING: False
FAILOVERCLUSTERDISKS: Cluster Disk 3,Cluster Disk 4,Cluster Disk 5
FAILOVERCLUSTERGROUP: SQL Server (MSSQLSERVER)
FAILOVERCLUSTERIPADDRESSES: IPv4;172.29.2.122;Cluster Network 2;255.255.255.0,IPv4;172.29.3.122;Cluster Network 3;255.255.255.0
FAILOVERCLUSTERNETWORKNAME: CLUSTER02
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: S:\
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
PASSPHRASE: *****
PCUSOURCE: d:\install\mssql\sp1
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: MANAGEMENT\sqladmin
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLDOMAINGROUP: <empty>
SQLSVCACCOUNT: MANAGEMENT\sqladmin
SQLSVCPASSWORD: *****
SQLSYSADMINACCOUNTS: MANAGEMENT\administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBDIR: T:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQMREPORTING: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\SystemConfigurationCheck_Report.htmHi Andreas Plachy,
Please make sure that the Virtual Server Name ‘CLUSTER02’ is unique on the network. In addition, are there any resources named ‘SQL Server’ on the Windows cluster? If that is the case, you may need to rename the related resources to avoid conflicting with
SQL Server, and try again.
Stephanie Lv
TechNet Community Support -
Printing from OSX Lion Client to Windows Server 2008
I have tried these methods:
=============
via System Preferences
IP Printer (Line Printer Daemon - LPD)
Address (both Server Name and IP Address)
e.g. lpd://servername/queue
Queue
Print Using (HP LaserJet P4010 Series)
Result:
After a test print is sent, the print queue dialog reads:
Processing Job.
Copying Print Data.
Connecting to Printer.
Paused - "/usr/libexec/cups/backend/lpd failed"
**** I have also tried using the hostname in place of the IP address
I get something to the effect of:
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Pre-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%BeginDocument Processor - EmbeddedDocumentCounter "Check for embedded document" (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %!PS-Adobe Processor - EmbeddedDocumentCounter "Check for embedded document" (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Post-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%Page: Processor - PageAccounting "Log page for accounting" (post, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Read 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Wrote 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to 10.157.32.92:515 for printer DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] STATE: -connecting-to-device
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to 10.157.32.92:515 (local port 1009)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command 02 DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Sending command string (12 bytes)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Reading command status...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command returning 1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Backend returned status 1 (failed)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Printer stopped due to backend errors; please consult the error_log file for details.
D [10/Nov/2011:12:24:35 -0500] [Job 27] End of messages
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state=5(stopped)
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-message="/usr/libexec/cups/backend/lpd failed"
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-reasons=paused
=============
via System PreferencesWindows *navigated to the server (e.g. smb://servername/printer/) with the browser.
Result:
After a test print is sent, i login to the dialog box with:
DOMAIN\USERNAME
PASSWORD
(*) Remember this password in my keychain
Status - On Hold (Authentication Required)
**** I have also tried various formats for the username here:
DOMAIN\USERNAME & password
USERNAME & password
SERVER\USERNAME & password
Here's the Log output:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Queued on "DOBL_24HR1" by "lab".
D [10/Nov/2011:12:26:21 -0500] [Job 28] job-sheets=none,none
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[0]="DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[1]="28"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[2]="lab"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[3]="testprint"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[4]="1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=3671 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:ad3091e2-399a-3964-4c78-b8a81bf25bdf job-originating-host-name=localhost time-at-creation=1320945980 time-at-processing=1320945980 PageSize=Letter"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[6]="/private/var/spool/cups/d00028-001"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[0]="<CFProcessPath>"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[9]="HOME=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[11]="[email protected]"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[12]="SOFTWARE=CUPS/1.5.0"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[14]="USER=root"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[17]="IPP_PORT=631"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[18]="CHARSET=utf-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[19]="LANG=en_US.UTF-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[20]="APPLE_LANGUAGE=en-US"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[21]="PPD=/private/etc/cups/ppd/DOBL_24HR1.ppd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[22]="RIP_MAX_CACHE=128m"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[24]="DEVICE_URI=smb://utlab-prsrv-02/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[25]="PRINTER_INFO=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[26]="PRINTER_LOCATION="
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[27]="PRINTER=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[28]="PRINTER_STATE_REASONS=none"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[29]="CUPS_FILETYPE=document"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[30]="FINAL_CONTENT_TYPE=printer/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[31]="AUTH_I****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[32]="AUTH_U****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[33]="AUTH_P****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 7646)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgpdftops (PID 7647)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/pstops (PID 7648)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 7649)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started backend /usr/libexec/cups/backend/smb (PID 7650)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started smb backend (PID 7653)
D [10/Nov/2011:12:26:21 -0500] [Job 28] STATE: +connecting-to-device
D [10/Nov/2011:12:26:21 -0500] [Job 28] Connecting to printer...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [10/Nov/2011:12:26:21 -0500] [Job 28] Looking up "utlab-prsrv-02"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Authentication required", current level=ERROR
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend (PID=7653) stopped with status 512
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend will exit with status 2
D [10/Nov/2011:12:26:21 -0500] [Job 28] load_banner(filename="/private/var/spool/cups/d00028-001")
D [10/Nov/2011:12:26:21 -0500] [Job 28] hpPostProcessing launched
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/01ddf4ecb23b2"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Final document orientation - 0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Setting language to en-US
D [10/Nov/2011:12:26:21 -0500] [Job 28] EWU support is absent for device.
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pages per sheet - 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Orientation - portrait
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pre-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%BeginDocument Processor - EmbeddedDocumentCounter "Check for embedded document" (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %!PS-Adobe Processor - EmbeddedDocumentCounter "Check for embedded document" (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%EndComments Processor - DriverVersion "Insert driver info" (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Post-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%Page: Processor - PageAccounting "Log page for accounting" (post, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Allowing document iterator to handle job termination...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Using line-by-line file iteration...
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - using PPD file "/private/etc/cups/ppd/DOBL_24HR1.ppd"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] PS Matching Mode = AP_ApplicationColorMatching
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Title: (testprint)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%CreationDate: (Thursday, November 10 2011 12:26:21 EST)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%For: (lab)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%LanguageLevel: 3
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Pages: 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%BoundingBox: (atend)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%PageOrder: Ascend
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Copying page 1...
D [10/Nov/2011:12:26:21 -0500] [Job 28] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Received SIGPIPE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Wrote 1 pages...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Job held for authentication.
D [10/Nov/2011:12:26:21 -0500] [Job 28] End of messages
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state=3(idle)
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-message="Authentication required"
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-reasons=none
==============
via CUPS (localhost:631)here is the syntax of my printer addresses:
SAMBA--
smb://username:password@serverhost/printer
smb://username:password@serverip/printer
smb://serverhost/printer
smb://serverip/printer
I get something like...
"/usr/libexec/cups/backend/smb failed"
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Title: (testprint)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%CreationDate: (Thursday, November 10 2011 12:39:00 EST)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%For: (lab)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%LanguageLevel: 3
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Pages: 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%BoundingBox: (atend)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%PageOrder: Ascend
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Copying page 1...
D [10/Nov/2011:12:39:00 -0500] [Job 29] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Current page number is 0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor PageAccounting after line %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] PAGE: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:39:00 -0500] [Job 29] ATTR: auth-info-required=username,password
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend (PID=8517) stopped with status 512
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend will exit with status 2
D [10/Nov/2011:12:39:00 -0500] [Job 29] Received SIGPIPE
D [10/Nov/2011:12:39:00 -0500] [Job 29] Wrote 1 pages...
D [10/Nov/2011:12:39:00 -0500] [Job 29] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:39:00 -0500] [Job 29] Job held for authentication.
D [10/Nov/2011:12:39:00 -0500] [Job 29] End of messages
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state=3(idle)
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-message="Authentication required"
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-reasons=none
=================
So yeah...
I'm totally stumped now.
I feel like I've tried every method imaginable, but still no luck.
Printing from OSX 10.6.8 works just FINE.
On the server side, I'm running Windows Server 2008... there's only a local admin and a local user account.
Clients running OSX Lion 10.7.2 -- All updated.
Printer is an HP LaserJet P4010-4510 series.
Workstation is an iMac 21.5-inch, Late 2009
3.06 Ghz Intel Core 2 Duo
Please help!!!
--- RichardLPD print service is not enabled by default in Server 2008. It can be enabled via the Print Serveer role, but I am remote and cannot confirm the exact setting.
As for SMB, the error log is showing;
Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/"
So it would suggest that there is still an issue with the account detail you are using as you show you have tried this syntax at one stage. If you want to continue to create the queue using SMB rather than LPD then I recommend using the CUPS web page (http://127.0.01:631) to create the queue. This will allow you to enter the syntax exactly as the error message shows. From previous testing I found it was okay to just use the account name rather than domain/account name on a domain bound server. -
Server 2008 Hyper-V Failover Cluster Error on Domain Controller Reboot
I am pretty new to Hyper-V virtual but I have 2 Hyper-V Clusters, each with 2 Nodes and a SAN, 1 Physical Domain Controller for failover cluster management and 1 virtual domain controller as backup. All is running well, no issues. I installed
windows updates on the physical DC and upon reboot, got an error 5120 on cluster 2 that says "Cluster Shared Volume 'Volume1' ('Cluster Disk 1') is no longer available on this node because of 'STATUS_CONNECTION_DISCONNECTED(c000020c)'. All I/O will
temporarily be queued until a path to the volume is reestablished. It pointed to the 2nd node in that cluster as being the issue but when I look at it, it is online and all healthy so I don't understand why the error was triggered and if the DC would
go down for a failure, would that node not be able to access the CSV permanently.
Appreciate any help anyone can provide.Hi mtnbikediver,
In theory, if you has the correct configuration of cluster the DC restart will not cause the CSV down, does your shared storage installed on your DC? Did you run
the cluster validation before you install the cluster? We strongly recommend you run the cluster validation before you build the cluster, same time please install the recommend update of 2008 cluster first.
Recommended hotfixes for Windows Server 2008-based server clusters
http://support.microsoft.com/kb/957311
I found a similar scenario issue the DC restart will effect the cluster network name resource offline, but it is for 2008R2.
Cluster network name resource cannot be brought online when one of the domain controllers is partly down in Windows Server 2008 R2
http://support2.microsoft.com/?id=2860142
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hello,
I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
I'm running Windows Server 2008 R2,
Any ideas?Hi saeedawadx,
Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
The following related article will give more helpful tips,
The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
Trouble Connecting to Cluster Nodes? Check WMI!
http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
MSDTC set up in SQL Server 2008 failover cluster
Hi Guys,
I am in the process of setting up failover cluster using SQL Server 2008 (64Bit) Enterprise on Windows Server 2008 R2 (64Bit) I have completed almost all the works but I got few questions regarding MSDTC configuration whether the MSDTC disk should
be assigned from SAN or it should be local to the disk , Separate disk for each nodes in the cluter or 1 disk to be used across all the servers for MSDTC in windows fail over cluster.
With regards, Gopinath.Hi Gopinath,
Please review the following similar blogs to get more details about configuring MDTC and pros & cons of different options.
How to Configure Multiple Instances of Distributed Transaction Coordinator (DTC) on a Windows Server Failover Cluster 2008
http://blogs.technet.com/b/askcore/archive/2009/02/18/how-to-configure-multiple-instances-of-distributed-transaction-coordinator-dtc-on-a-windows-server-failover-cluster-2008.aspx
How to configure DTC for SQL Server in a Windows 2008 cluster
http://blogs.msdn.com/b/cindygross/archive/2009/02/22/how-to-configure-dtc-for-sql-server-in-a-windows-2008-cluster.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS
Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan MYes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M -
MS DTC not coming online on SQL Server 2008 R2 failover cluster
Dear Experts,
On a SQL Server 2008 R2 failover cluster, MS DTC cluster service is not coming online. It fails with below error message.
"The DTC cluster resource's log file path was originally configured at: E:. Attempting to change that to: M:. This indicates a change in the path of the DTC cluster resource's dependent disk resource. This is not supported. The error code
returned: 0x8000FFFF".
From the Component Services, we can see under the clustered DTCs, in the properties of the log file that it is configured for E drive. The 'Transaction list' and 'Transaction Statistics' are empty. When I try to change the log file path to
point to M drive I get this warning message.
"An MSDTC log file already exists in the selected directory. Resetting an existing MS DTC log file may cause your databases and other transactional resource managers to become inconistent. Please review the MSDTC Administrator's manual before
proceeding. Do you wish to reset the existing MS DTC log"
Could you please advise if this is safe to proceed with this warning as the 'Transaction list' and 'Transaction Statistics' are empty or would it cause any other issue.
Thanks,
MMTauseef
Did you tried using wmi....win32_share
$path = "location where to create the folder"
$share = $Shares=[WMICLASS]'WIN32_Share' # class in wmi for share
$Sharename = 'Sharename'
New-Item -type directory -Path $Path
$Shares.Create($Path,$Sharename,0,255,$Sharename)
$Acl = Get-Acl $Path # cmdlet for getting access control list
$Access = New-Object system.security.accesscontrol.filesystemaccessrule("Username","FullControl","ContainerInherit, ObjectInherit", "None", "Allow")
$Acl.AddAccessRule($Access)
Set-Acl $Path $Acl
Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful. -
Server 2008 R2 Failover cluster network configuration
Hi
We have a customer with a Server 2008 R2 Hyper-V failover cluster. They have 2 cluster networks, "Cluster Network 1" and "Cluster Network 2".
"Cluster Network 1": NIC team on 172.16.1.0/24 for private cluster network communication
"Cluster Network 2": NIC team on 192.168.1.0/24 for production network communication
I can see that "Cluster Network 1" is configured to "Allow cluster network communication on this network" and "Allow clients to connect through this network".
If "Cluster Network 1" is ONLY for communication between the to cluster nodes then I assume the selection in "Allow clients to connect through this network" should be removed?
/LasseIt will cause a lost network connection for any client that is accessing through that network. Those clients would need to reconnect.
Did you configure both IPs on the cluster resource name that clients are accessing? If you only configured the one you want, there should be no issue. If you configured both, then it is possible some clients might be connected via the private
network.
Another thing you should, and if you have already done this you will most likely not have issues at all, is that you should disable DNS registration on any network you do not want client access coming through. If the clients can only find the resource
through the DNS name registered, that is the way they will be coming in. In my clusters, which often have 7 or more NICs, there is only one with a published DNS record.
. : | : . : | : . tim
Maybe you are looking for
-
Problems in upgrading 8.1.6 to 8.1.7 on P4 WinNT Server
I have to upgrade Oracle 8.1.6 to 8.1.7 cause DB application has been updated to that version. Obviously I have to keep data and all Oracle previous (and working !) setting. I did it on a test computer running with a P3 600Mhz and everything runs fin
-
Getting home video in to my Imac
Can I use my minni DVI to load video from my cam. I have the DVI to yellow RCA or s-cable adapter. If not does anyone have any idea how I can do it. My can has red,white and yellow RCA out.
-
the server "mail1.eircom.net refused to allow a connection on port 467
-
Safari displays pages from US not UK
Hi all... I recently purchased a Macbook Pro in the UK. When setting up I listed my location as London UK, however whenever I google or search in Safari the pages always load up as US pages, for example ebay.com rather than ebay.co.uk etc. Is there a
-
How to do cheap rendering while user modifies parameters?
Dear all, I am playing around with my first AE plugin. At the moment (and for the foreseeable future) each frame takes some time to render. Enough to make the modification of parameters through sliders really uncomfortable, since at each value throug