Server 2008 R2 64 and hiding application ICONs

hi there
I just installed Symantec Disk Encryption 10.3 on three Windows 7 64 desktops, it was installed unmanged.
Each user that logs on and gets an automatic popup that says "Do You Want To Enable PGP To Be Available From This Computer" for every user logging on. Symantec says Managed or Unmanged, there is no Symantec option for that.
Is there a way, either Domain GPO or local Windows7 policy to block that? Thanks
Or, is there a way with either Domain GPO or local Windows7 policy to block or 'grey out' specific applications or icons?
Thanks
B.

Hi b.15101r.14944a,
The GPO can't used for application configuration, you can ask your software vendor for the more help, or if cancle this pop-up start at system boot possible.
The related simlar thread:
How to manage/remove startup Programs in Windows 7
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-to-manageremove-startup-programs-in-windows-7/c2ff3fd1-3e32-46d9-9522-ec05034a2db1
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

Hi Guys,
here i'm again.
Well I'm developing on a 32-Bit OS with Crystal Reports 2008. I've deployed my solution to SharePoint, but when i try to call a report in the aspx-Website i get the following error:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Here are the technical details:
- Windows Server 2008 (64Bit)
- IIS7
- Microsoft Office Server 2008 (64Bit)
- Crystal Reports 2008 SP3
I've read, that there isn't a 64-Bit runtime version of CR2008. Then i tryed the two following suggestions i found in this forum:
1. Try to run the IIS-Application-Pool in 32-Bit-Mode -> This don't work, because SharePoint then throws a "Internal Server Error - Code 500" (no SharePoint Sites are available).
2. Try to compile the Visual Studio Project as 32-Bit -> This don't work, because SharePoint could not load the assembly
Well, are there any other hints, suggestions or experiences how i could get this to work?
Thanks in advance,
Christian
Edited by: C.Kaiser on Oct 12, 2010 5:22 PM

Hi,
I Have a Doubt Similarly which is related to the above post.....
I had created a asp.net website with sql db, Its running fine in my PC, But when i host it in my server It shows an Error like..
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Design, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "
I am Using Visual Studio 2010, and my Server is Windows Server 2008 R2 32bit
I am also attaching the screenshot of the error.
Can anyone Please Help me , Its Very urgent..
Anyone Please Help Me ,,,, Its Very Urgent .......
Thanks In Advance...

Understanding Windows Small Business Server 2008 Backup - Full and Incremental with 2 Backup Destinations

Hi,
I am re-posting a question from the following page here as I have the same problem now and I can't seem to find the answer even though the question has been marked as solved: http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/daff108b-effa-4dad-807a-d604345975dd
Below is a copy of the question:
I have 2 backup drives, (Backup Drive 1 and Backup Drive 2)
Lets assume I have never performed a backup, so Day 1 is the first backup of the server.
Backup Drive 1 connected on Day 1 it performs a FULL Backup - this is expected.
Backup Drive 1 connected on Day 2 it performs an INCREMENTAL Backup - this is expected.
Backup Drive 2 connected on Day 3 it performs a FULL Backup - this is expected.
Backup Drive 1 connected on Day 4 it performs a FULL Backup - WHY? my understanding is that is should perform an Incremental Backup from Day 2
Backup Drive 2 connected on Day 5 it performs a FULL Backup - again why is it not performing an Incremental Backup from Day 3?
This means that in normal operation (Backup Drives alternate every day) We are performing FULL Backups everyday. In a few months this wont be an acceptable backup strategy; it will take too long.
I've used 'Configure Performance Settings' in the Windows Server Backup mmc to specify 'Always perform incremental backup' - it makes no difference.
If I look at the Backup Drive Disk Usage details it confuses me even more. It may be performing Full Backups everyday but it's definitely not storing Full Backup copies on the Backup Drives.
It seems to be that even when a Full Backup is performed, only the deltas are written to the Backup Drive so even though it takes longer it has the same effect as an incremental (so why doesn't it just perform an incremental?)
I don't understand Microsoft's use of Full and Incremental, it seems obtuse to provide a choice that appears to have no effect on the actual data written to the Backup Drive.
My real-world experience is at odds with that statements made in
The Official SBS Blog it states "every backup is incremental from a storage point of view" as well as "Because the wizard schedules differential-based backups' (nowhere in the Backup mmc have I seen any reference or options for differential),
"Backup runs quickly" and "...works the same for multiple disk rotation." (This is simply not the case with a 2-disk rotation. It runs a lengthy FULL Backup every time.)
The backup has been configured using SBS Console, runs once a day at 16:00. 2 Backup Drives, alternating daily.
Can anyone clarify Windows Backup operation for me?
I'd appreciate any feedback at all, thanks.

Optimizing Backup and Server Performance
(Windows Server 2008 R2)
http://technet.microsoft.com/en-us/library/dd759145.aspx
Even if you choose the option to create incremental backups, Windows Server Backup will create a full backup once every 14 days, or after 14 incremental backup operations, to reduce the risk from disk corruptions.
Of course, this is for R2.
Merv Porter [SBS-MVP]
============================
"Merv Porter [SBS-MVP]" wrote in message
news:a1ca618e-ad66-4770-8c39-21285a08f671...
Interesting post...
WBAdmin to remote backup server
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/764fe9a4-960e-4e90-b8fb-8e7581752a9d#520f38fe-149c-4424-9c0b-54695297e919
In Windows Server 2008, there are several reasons which may cause the backup to be full instead of incremental
1. Backup on the target is deleted/not present.
2. Source volume snapshot is deleted, from which the last backup was taken.
3. 7 days have passed or 6 incremental backups have happened since the last full backup.
4. Churn on the backup source is high (more than 50%)
Abhinav Mathur[MSFT] Microsoft
Merv Porter [SBS-MVP]
============================
"Les Connor [SBS-MVP]" wrote in message
news:0053cd83-75d1-4dbc-8182-ae67cadf4780...
I believe it's how backup is designed, as I see the same thing. Why it works
the way it does is another story though, I don't know the answer to that.
Les Connor [SBS MVP]
"Kurni" wrote in message
news:[email protected]...
> Hi Les,
>
> Thank you for your reply.
>
> Are you saying that that's how the backup is designed? What I (and the
> original poster of the question) have in mind is actually different (each
> disk should have their own base backup).
>
> Quoting from the original question:
>
> Backup Drive 1 connected on Day 1 it performs a FULL Backup - this is
> expected.
> Backup Drive 1 connected on Day 2 it performs an INCREMENTAL Backup - this
> is expected.
> Backup Drive 2 connected on Day 3 it performs a FULL Backup - this is
> expected.
> Backup Drive 1 connected on Day 4 it performs a FULL Backup - WHY? my
> understanding is that is should perform an Incremental Backup from Day 2
> Backup Drive 2 connected on Day 5 it performs a FULL Backup - again why is
> it not performing an Incremental Backup from Day 3 ?
> Please let me know if I actually misunderstand how windows server backup
> work.
>
MVP - SBS

Uninstall SQL Server 2008 Express R2 and SQL Server 2012 unsuccessfully

HI
I want to uninstall SQL Server 2008 R2 and SQL Server 2012 but it was successful.
When I try to uninstall 2008 R2
It shows the sqlsupport.msi can't find
Warning 26003. Microsoft Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
When I uninstall 2012, it shows the SQL Browser has been installed.
Warning 26003. Microsoft SQL sERVER 2012 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server Browser for SQL Server 2012

I tried to uninsall SQL Server 2008 R2 and SQL Server 2012.
Yes, I did what you said : right click on Microsoft SQL Server 2008 R2 and then uninstall.
System pop up window says :
Warning 26003. Microsoft SQL Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
I hope you are uninstalling from Add remove program. Can you first uninstall
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
And then uninstall the
Microsoft SQL Server 2008 R2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Epson LX-300, Epson FX-890 printers in Windows Server 2008 x 64 and Windows 7 (x32 and x64)

I have the following problema working with RDP connections to Windows 2008 Server (x64) SP2 and Windows 7 Professional (x32 & x64).
I have setup correctly an Epson LX-300, LX-300+, LX-300+II and FX-890 printers in separate computers in Windows 7 (all working under Windows 7 Professional x64 and x32) and they work correctly.
I need to RDP to a Windows 2008 Server SP 2(x64) and once I log in, the Server Operating System recognizes my printer with no problem at all (Redirected Printer), but when I print, the characters and not understandable, since the printed information is blurry.
When I do excatly the same procedure but with a Client with Windows XP installed the printed information is totally clear, so we can determine at least that the printers are working fine.
I understand this should be a driver issue, but i simply can't make it work correctly.
Can anybody help.

Hi,
Since the printer can print the test page, there is no need to collect the Event log. I notice there is no specify driver for Windows 7 and Windows Server 2008. It seems the default Easy Printer driver doesn’t work properly for these printers.
I suggest you install the Windows Vista driver version on the Server for testing.
LX-300 Impact Printer
LX-300+ Impact Printer
LX-300+ II Impact Printer
If the issue persists, let’s disable Easy Printer for a test.
Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection ->
Disabled
Also test the following KB.
http://support.microsoft.com/kb/959442/en-us
Niki Han
TechNet Community Support

Upgrade to SP3 from sql server 2008 R2 SP2 and SharePoint server 2010 known issues

Hi Guys,
We are planning to upgrade SQL server to SP3 from 2008 R2 SP2 and would like to known if there are any known issues with SharePoint 2010 server and office web apps.
Though I was searching blogs and forums and could not find any noteworthy but wanted to look if any noted SharePoint issues after the upgrade.
VM

Hi Venu,
There should no issue for SharePoint 2010 with install SP3 for SQL2008R2 (also like comments mentioned in article below), I searched from internal and internet, there seems no document/article mentioned the known issue for SharePoint about this, you can
back up your environment and test the SP3 in a test environment before touching the production environment.
https://habaneroconsulting.com/insights/SharePoint-SQL-Server-Support-Matrix#.VSTY-nkfr4Y
http://blogs.msdn.com/b/glsmall/archive/2014/12/03/list-of-fixes-in-sql-server-2008-r2-sp3.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Upgrade sql server 2008 to 2008R2 and apply Service pack 3

Hello,
I have a two node cluster (sql server 2008). I would like to upgrade to SQL Server R2 and at the same time would like to patch to Service Pack 3. What would be the best way to accomplish this task with minimal downtime to the users?
This is my plan:
1. Detach any read only databases.
2. Upgrade to 2008 R2 (shared feature only) on passive node (node1).
3. Apply SP3 on passive node in step 2.
4. Swith active node to passive node (node2).
5. Upgrade to 2008 R2 (shared feature only) on node2.
6. Apply SP3 on node2.
7. Upgrade db (instance) on node2 to 2008 R2.
8. Upgrade db (instance) on node1 to 2008 R2.
9. Re-attach read only databases.
Is my procedures correct?
Thank you.

Hello,
Have you seen the following article before?
http://msdn.microsoft.com/en-us/library/ms191295(v=sql.105).aspx
You can slipstream SQL 2008 R2 + SP3.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to Deploy SSRS Reports(Sql Server 2008 R2) into Oracle Weblogic Application Server

Hi Friends
One of my project requirement is Developing reports by using SSRS and deploying the reports into Oracle Wblogic Server
Could you please give me a Steps where we need to configure.
Regards
Hasthi.

Hi Hasthi,
As per my understanding, I think we couldn’t directly deploy the SSRS report to Oracle Weblogic Application Server. We can deploy report to report server and SharePoint library. And we can display report to some applications, for example, windows application
and web application. Sorry for that I am not familiar with Oracle. So if your Oracle Weblogic Application Server support those Visual Studio application, then we can use report viewer control to display report in application. For more detail information about
report viewer control, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251671.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SQL Server 2008 Analysis Services and OBI EE

Hello,
How to use the Multidimensional import functionality of the BI EE Administration against a cube stored in a SQL Server 2008 Analysis Services?
Thanks,
Paul

Thanks Christian,
The article you mention takes for granted that a valid Analysis Services XMLA URL is present, which is not my case.
I have found a good article on how to configure specifically Analysis Services 2008 here:
http://bloggingabout.net/blogs/mglaser/archive/2008/08/15/configuring-http-access-to-sql-server-2008-analysis-services-on-microsoft-windows-server-2008.aspx
The article is the nearest I could find from my particular software platform (Vista).
What I'm currently dealing with is [nQSError: 64203] "XMLAnalysisError.0xc1010000", which is probably some security setting I have to get right. I will keep the thread updated if I move on.
Thanks,
Paul

Just installed Server 2008 64-bit and lost my InterVideo DVD

Is there anyway that I can reinstall the DVD player - it comes in handy on those long flights.....
I am running an X300 with 4 gig RAM
Message Edited by twreynol on 12-05-2008 06:48 PM
Solved!
Go to Solution.

welcome to the forum!
the intervideo package can be found here: http://www-307.ibm.com/pc/support/site.wss/MIGR-68730.html
so you know, server 2008 doesn't contain the codecs necessary to play DVDs. after all, it's a server OS. if the intervideo package doesn't install any codecs then you'll need to install a third-party codec pack like k-lite.
i personally use windows media player for DVDs under 2008. it works quite well.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Oracle Application Server 10g Rel 3 and forms Application Deployment

Dear All,
I am in process of installing Oracle AS 10g rel 3. and I have an application (ERP) devloped in Oracle 10g IDS (Devloper Suite). So when I read the installation Doc for Oracle 10g rel3 installation I didn't get any information regarding the forms-reports component.
So can somone please tell me how I can deploy my IDS based application in Oracle 10g Rel 3 Application Server. Or if there is any other process to deploy the application in application Server.
Oracle AS 10g Rel3 DVD containing the following folder------ bpel, companioncd, esb, owsm, soa
Thanks in Advance.
Pradeep Sharma

Hi Pradeep,
Forms cannot be deployed in 10gR3. you need to have 10gR2.
thanks,
--Ranga

Windows Server 2008 R2 - System State Backup - Application Log: CAPI2 513

When performing a system state backup from wbadmin, I get...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Please wait while system state files to back up are identified.
This might take several minutes...
Summary of the backup operation:
The backup of the system state failed [12/15/2011 6:38 PM].
Log of files successfully backed up:
C:\windows\Logs\WindowsServerBackup\Backup-15-12-2011_18-38-05.log
Log of files for which backup failed:
C:\windows\Logs\WindowsServerBackup\Backup_Error-15-12-2011_18-38-05.log
The operation ended before completion.
The system writer is not found in the backup.
In the event log, I get...
Log Name: Application
Source: Microsoft-Windows-CAPI2
Date: 12/15/2011 6:38:24 PM
Event ID: 513
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.domain.com
Description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddCoreCsiFiles : GetNextFileMapContent() failed.
System Error:
The parameter is incorrect.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-12-15T23:38:24.430498600Z" />
<EventRecordID>144157</EventRecordID>
<Correlation ActivityID="{0450BC50-F800-0002-8457-553A80BBCC01}" />
<Execution ProcessID="1240" ThreadID="4360" />
<Channel>Application</Channel>
<Computer>Server1.domain.com</Computer>
<Security />
</System>
<EventData>
<Data>
Details:
AddCoreCsiFiles : GetNextFileMapContent() failed.
System Error:
The parameter is incorrect.
</Data>
</EventData>
</Event>
The System Writer is not showing up when I view vssadmin list writers.
I have already tried every tip in the following links:
http://technet.microsoft.com/en-us/library/cc734021(WS.10).aspx
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/bb760434-de80-4cb6-ae9e-bd253e4b037c/
I have also run sfc /scannow and rebooted. No luck.
I think the reason none of the tips at the above links work for me is that the System Error is NOT access denied like many others are getting, but is instead
The parameter is incorrect. I think that's the key.
Any ideas why I am getting this error and why my System Writer is nowhere to be found?

Hi,
You mentioned that “The System Writer is not showing up when I view vssadmin list writers.”
you may reboot the related services or re-register the writers, please refer to:
How to Re-register Volume Shadow Copy Service (VSS) Components on Windows 2008/Windows 2003.
http://www.symantec.com/business/support/index?page=content&id=TECH70486
Best regards,
Jeff Ren
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Applying Service Pack on multiple instance SQL Server 2008 R2 Cluster and Standalone.

Friends,
Its my first time I am applying Service pack to both Standalone and Clustered SQL 2008 R2 servers. I have multiple instances running on both stand alone and Clustered environment. I don't know how to apply pack with multiple instances. Do I need to apply
the service pack each instance one by one or I can just run the pack to each node of cluster and each box of stand alone server? Will I get any multi instance selection option during the installation process so that I can select multiple instances at once??

When installing service pack for multiple instances in a standalone machine, you just run the installer and it lists all the instances eligible for the update. You could do it one by one or do it at the same time. Doing it at the same time saves time and
energy. If you selected multiple instances then you dont have to do anything else.
In case of cluster, if you have multiple instances then you need to be little careful.
Eg: Assume you have a 2 node cluster Node 1 and Node 2. Two instances Instance 1 active on Node 1 and Instance 2 active on Node 2. What I would do in this case is to first failover any one instance to the passive node. Assume I failed over Instance 2 to
Node 1. Now Node 1 is active node for both instance 1 and instance 2 and Node 2 is passive for both instances. At this point I run the service pack on Node 2. Once patching is done, I reboot the node and then failover the instaces one by one to Node
2. At this point both instances 1 and 2 would get upgraded and will be active in Node2. Now Node 1 is passive and so run the update there. Once the service pack is installed, reboot and then fail back Instance 1 back to Node 1. Note: I would also failover
Instance 2 to Node 1 just to confirm that failover works completely after service pack update.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Lion Server Java Control Panel and Java applications empty?

I have installed FileMaker Server 12 on a Lion Server (10.7.5). The server is pretty clean, only a few users have been set up for CalDAV and CardDAV use in a small company. While installing the FileMaker software shouted for Java, which I installed from Oracle, version 7 update 10 (used the link).
But Java is not running fine as it seems. When I open System Preferences - Java to open the Java Control Panel, the panel shows up but is completely empty. And so for any Java program I run, all windows will show up empty.
Any ideas anyone?

Try clearing the java cache manually.
/Users/username/Library/Caches/Java/cache/
if that doesn't work follow this process.
Uninstall the JRE7
Restart
Install Java for OS X 2012-006
Restart
Install JRE7
Restart
Lastly, if this is a hackintosh you may be fighting a uphill battle. I saw a known issue posted by oracle with some graphics cards that produced this issue on windows.

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Server 2008 R2 64 and hiding application ICONs

Similar Messages

Maybe you are looking for