Server 2008 R2 Hyper-V guests lose NIC after recent Windows Update

Hi Folks,
I have  a Windows 2008R2 Hyper-V server with 20 guests.  They have been using a standard network adapter for 2 years.  Last night after running this months windows updates on a number of the guest VMs, each running Windows 2008R2 some of these
adapters disappeared.  That is they are not visible in "network adapters" on the guest VM, the static IP configuration is gone and instead the VM had a dynamically assigned IP shown in IP config to a Microsoft VM bus network adapter #2. 
The other machines that didn't have updates run on them and have adapters visible show a Microsoft VM bus network adapter.
I don't see anything obvious in event viewer.
I've done the basic "reinstall integration services" but it still doesn't show a configurable network adapter.
I've uninstalled the windows updates and "reinstalled integration services" no luck.
Does anyone have recommendations on next steps?
I'll update the post as I move forward.
Thanks,
Ivan
Ivan

Hi,
Could you try to show the hidden device in the device manager, you can refer the following article to show the hidden device:
How to Find a Lost, Missing, Hidden or Removed Network Card (NIC) or Other Device and Even Remove it
http://blogs.technet.com/b/danstolts/archive/2010/09/25/how-to-find-a-lost-missing-hidden-or-removed-network-card-nic-or-other-device-and-even-remove-it.aspx#sthash.z6jSu8tZ.dpuf
If you can see the lost NIC adapter then try to remove it uninstall it then rescan the device to see if there have the virtual NIC adapter found.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • 2008 r2 hyper-v guest with static IP always looses network connectivity after every restart - no problem with DHCP

    Hello,
    We are running 2008 R2 domain with one physical DC and other running in VM on Hyper-V host (2008 R2 Standard). The host has 4 NICs and is configured to use one physical NIC for itself (management) and the hyper-v guest is configured to use another dedicated/physical
    NIC (through microsoft virtual switch) just for itself.
    I noticed that after setting the hyper-v guest with a static IP address all works fine only until guest restart. When the guest boots up the IP address is still configured correctly in IPv4 properties, but there is no network connectivity at all and in fact
    the guest shows running APIPA config in ipconfig /all output. That situation continues until I remove the virtual NIC from hyper-v guest, remove the virtual switch from dedicated NIC on host and then reconfigure it (using same settings as they were). very
    annoying.
    For time being I switched the virtual DC (problematic hyper-v guest) to a DHCP IP and configured DHCP server (running on physical DC machine, not on hyper-v host) to store a reservation for the hyper-v guest so it always gets the same "static"
    IP configuration.
    Is there some kind of a problem/bug with using static IP on (2008 R2) hyper-v guests? is there a hotfix for static IP config in hyper-v guest environment?
    both 2008 R2 OSes (host and guest) are up to date with all updates (synced with Microsoft, not WSUS).

    OK, I'm not at the office now, but took my time to test out the restart scenarios on problematic virtual guest remotely.
    No dice, same as it was, everything works fine after guest has IP configured in DHCP mode (IP reservation of 192.168.1.5 for specific MAC address) and it doesn't work after restart in static IP mode (same address, works before restart of guest).
    I also took "arp -a" outputs at each step from host server and that was always saying there is only a single host (192.168.1.5 = VDC = problematic virtual guest) assigned to that IP address and always with same MAC, so that pretty much rules out
    ARP/MAC troubles and no issues with switches/routers getting spoofed. Problem is most likely with the virtual guest (WS2008R2) or within the host running same OS.
    Here are outputs:
    A) VDC has IP configured in DHCP mode - always same, survives through restart (all works)
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : CD.lan
    Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
    Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : Thursday, January 30, 2014 5:34:48 PM
    Lease Expires . . . . . . . . . . : Friday, February 07, 2014 5:35:26 PM
    Default Gateway . . . . . . . . . : 192.168.1.254
    DHCP Server . . . . . . . . . . . : 192.168.4.5
    DHCPv6 IAID . . . . . . . . . . . : 268440925
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
    DNS Servers . . . . . . . . . . . : 192.168.1.5
    192.168.4.5
    NetBIOS over Tcpip. . . . . . . . : Enabled
    ARP -a output from host server at that time:
    Interface: 192.168.1.4 --- 0xc
    Internet Address Physical Address Type
    192.168.1.5 00-15-5d-01-d3-00 dynamic
    B) VDC has IP configured in static mode - BEFORE RESTART (all works)
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
    Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.254
    DHCPv6 IAID . . . . . . . . . . . : 268440925
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
    DNS Servers . . . . . . . . . . . : 192.168.1.5
    192.168.4.5
    NetBIOS over Tcpip. . . . . . . . : Enabled
    ARP -a output from host server at that time:
    Interface: 192.168.1.4 --- 0xc
    Internet Address Physical Address Type
    192.168.1.5 00-15-5d-01-d3-00 dynamic
    C) VDC has the same IP configured in static mode - AFTER RESTART (no more network connectivity at all, LAN in Public zone)
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : VDC
    Primary Dns Suffix . . . . . . . : CD.lan
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : CD.lan
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
    Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
    Autoconfiguration IPv4 Address. . : 169.254.135.153(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.0.0
    Default Gateway . . . . . . . . . : 192.168.1.254
    DHCPv6 IAID . . . . . . . . . . . : 268440925
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
    DNS Servers . . . . . . . . . . . : 192.168.1.5
    192.168.4.5
    NetBIOS over Tcpip. . . . . . . . : Enabled
    ARP -a output from host server at that time:
    Interface: 192.168.1.4 --- 0xc
    Internet Address Physical Address Type
    192.168.1.5 00-15-5d-01-d3-00 dynamic
    Throughout the testing, the hyper-v host IP configuration and IPconfig output was always staying same.
    The Network Connection #2 is the only one the host uses (not shared with hyper-v guests).
    The Network Connection #4 is assigned to Microsoft Virtual Switch hence why it doesn't show up in results, like below:
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : HYPER-V
    Primary Dns Suffix . . . . . . . : CD.lan
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : CD.lan
    Ethernet adapter Local Area Connection 3:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter #3
    Physical Address. . . . . . . . . : 9C-8E-99-52-15-91
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter #2
    Physical Address. . . . . . . . . : 9C-8E-99-52-15-90
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::dc78:8a3b:38a5:7af3%12(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.254
    DHCPv6 IAID . . . . . . . . . . . : 312250009
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-67-52-8F-9C-8E-99-52-15-93
    DNS Servers . . . . . . . . . . . : 192.168.4.5
    192.168.1.5
    NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Local Area Connection:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter
    Physical Address. . . . . . . . . : 9C-8E-99-52-15-93
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    On Monday I will install more test guests in Hyper-V host (WS2008R2), in variety of flavors like 7x64, 8.1x64, ws2012r2, and see if they show similar problems with static IP configuration when utilizing a dedicated NIC from host server.
    Don't get me wrong, I can live with virtual DC running on DHCP IP reservation (which is based on MAC), because the virtual DC pretty much requires a physical PDC (hosting also DHCP in my network) to be present for safety reasons ... however I prefer a static
    IP configuration on all servers, hence my question and surprise why it doesn't work.

  • Adding nodes to Windows Server 2008 R2 Hyper-V Cluster..

    Currently we have a 3 node Windows Server 2008 R2 Hyper-V Cluster in production. There are about 3 terrabytes worth of VMs running across these nodes.
    It is over-committed, so i've setup two new nodes to add to the cluster.
    I've done this before in a SQL cluster but never a Hyper-V cluster.
    If I don't run validation when adding the nodes, will there be downtime?
    The quorum is setup for disk majority, everything is identical on all nodes that needs to be. Shared storage is recognized and ready on the new nodes. I've gone through every checklist that Microsoft has. I'm just curious if the virtual machines will go
    offline on the current nodes when i add the two new nodes.
    Everything is identical down to the wsus updates installed. From networking to storage everything is perfect.
    I don't want to run validation as I know that'll take everything offline.

    Hi,
    It is recommend to run a validation test. You can select custom test. (skip storage).
    When add the new node to existing cluster . it will not bring down existing VM. 
    Lai (My blog:- http://www.ms4u.info)

  • Server 2012 r2 Hyper-v guest network speed with 10 GB NIC's

    Hi
    Setting up a Server 2012 r2 Hyper-v host with an onboard 4 port 1 GB nic and a offboard dual port 10 GB nic. We are using the 1gb quad port for management. The 10 Gb we intend using for hyper-v guest use however we don't seem to be able to achieve very high
    speeds though the 10 GB adapter when assigned to a virtual switch. Testing the 10 Gb nic from the host confirms that we can transfer/get 10 GB speeds. When assigned to a virtual switch however the speed drops to about 1-2 Gbps. Has anybody seen anything like
    this ?. We've tried a variety of settings and i can confirm that the network traffic is using the 10 GB nic.

    Hi,
    I am almost certain what you see is by design. I don't want to go into to much detail because I'm in a bit of a hurry. But allow me to explain.
    Suppose you have a 10Gb NIC interface and an multi-core CPU. When you have RSS (Receive-Side Scaling) disabled a single core can normally handing
    around 2.5-4.3Gbps. When you enable RSS the data streams/traffic is spread across multiple cores.
    But RSS is a network optimization feature for the Management OS, not for a vSwitch. Instead you should use VMQ (Virtual Machine Queuing). VMQ is
    the equilavant of RSS, but then intended for VMs. But... there is a difference. VMQ does not spread single data streams/traffic across multiple cores. Instead is (dynamically) assigns each vmNIC its own core. So... you don't use multiple-cores at a time for
    a single vmNIC. You can't use RSS and VMQ at the same time. Keep that in mind.
    But... you can accomplish this by enabling vRSS as well. That's another story.
    If you watch the following video, at the end you know all about VMQ.
    Hyper-V dVMQ
    http://www.hypervrockstar.com/tag/dvmq/
    Boudewijn Plomp | BPMi Infrastructure & Security
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

  • Server 2008-R2 Hyper-V VM dont update physical CD-ROM

    Hello guys,
    I got a Server 2008 R2 with Hyper-V role installed.
    I attached the physical CD-ROM to my Hyper-V TS server because the users would like to use CD-ROM's.
    Normally this works like a charme..
    Now i can only see the old CD-ROM as it just wont refresh.
    Anyone got a clue where to find a sollution?
    With kind regards, René de Meijer. MIEGroup.

    Hi,
    Could you try to show the hidden device in the device manager, you can refer the following article to show the hidden device:
    How to Find a Lost, Missing, Hidden or Removed Network Card (NIC) or Other Device and Even Remove it
    http://blogs.technet.com/b/danstolts/archive/2010/09/25/how-to-find-a-lost-missing-hidden-or-removed-network-card-nic-or-other-device-and-even-remove-it.aspx#sthash.z6jSu8tZ.dpuf
    If you can see the lost NIC adapter then try to remove it uninstall it then rescan the device to see if there have the virtual NIC adapter found.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sever2012 R2 VHD running in Server 2008 R2 Hyper-V -

    I wanted to add "nightmare", after the end of the title, but I am holding that this is only a dream.
    So I have an 8GB Dual Core 2008 R2 server, set up Hyper-V, and even got the Evaluation Server2012 R2 VHD running. But I can hardly do anything with it.
    I have been trying to test a web site migration. The Server2012 R2 install allowed me to get IIS set up and host the default site. I also installed SQL 2008 R2 Express on the VHD, got it working, but I can not figure out how to get SQL Server Management
    Studio running.
    Seem I need to have .Net 3.5 installed and this is where it gets hairy. MSDN/TechNet  says to use the Add Roles and Features option in Server Manager, so I did but it will not install. Returns this Error: 0x80091007. Bing and Google searches do not
    have a single thread as of this posting with that error returned.
    Found a few off beat errors from the same operation but they seem just to different to be of help.
    If this is a VHD limitation, then I really like to know why there is also a 180 day limit on it if its not going to work anyway.
    Has anyone seen this type of error or have a work around on installing .net 3.5 and SSMS? I have also tried to the direct download of 3.5 and it will not install. I am thinking there must be a Hotfix or something.
    Any help would be appreciated.
    htm

    The server is connected to the internet but is still failing. I have tried a number of tools to remove MS reported security updates that are causing the issue as reported in this KB....
    http://support2.microsoft.com/kb/3005628
    And installed the necessary update. Then tried to use the Add Roles and install .net 3.5 and received an Error: 0x80091007
    DISM failed. No operation was performed. For more information, review the log file.....
    2015-01-15 08:44:23, Info                  DISM   PID=796 TID=816 Scratch directory set to 'C:\Users\ADMINI~1\AppData\Local\Temp\1\'. - CDISMManager::put_ScratchDir
    2015-01-15 08:44:23, Info                  DISM   PID=796 TID=816 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
    2015-01-15 08:44:23, Info                  DISM   PID=796 TID=816 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Manager: PID=796 TID=816 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE:
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE:
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=amd64, Number of processors=1
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE: Dism.exe version: 6.3.9600.17031
    2015-01-15 08:44:23, Info                  DISM   DISM.EXE: Executing command line: DISM  /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:"C:\Users\Administrator\AppData\Local\Temp\1\NET35\x64"
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Provider Store: PID=796 TID=816 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:23, Info                  DISM   DISM Manager: PID=796 TID=816 physical location path: C:\ - CDISMManager::CreateImageSession
    2015-01-15 08:44:23, Info                  DISM   DISM Manager: PID=796 TID=816 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2015-01-15 08:44:25, Info                  DISM   DISM Manager: PID=796 TID=816 Successfully loaded the ImageSession at "C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7"
    - CDISMManager::LoadRemoteImageSession
    2015-01-15 08:44:25, Info                  DISM   DISM Image Session: PID=668 TID=2260 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:25, Info                  DISM   DISM OS Provider: PID=668 TID=2260 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM OS Provider: PID=668 TID=2260 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM OS Provider: PID=668 TID=2260 Host OS verion is 6.3 - CDISMOSServiceManager::SetDllSearchPath
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Warning               DISM   DISM Provider Store: PID=668 TID=2260 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2260 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Manager: PID=796 TID=816 Image session successfully loaded from the temporary location: C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7
    - CDISMManager::CreateImageSession
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=3104 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=3104 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM.EXE: Target image information: OS Version=6.3.9600.17477, Image architecture=amd64
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:25, Info                  DISM   DISM Package Manager: PID=668 TID=2964 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2015-01-15 08:44:25, Info                  DISM   DISM Package Manager: PID=668 TID=2964 CBS is being initialized for online use. More information about CBS actions
    can be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=2964 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\IBSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Warning               DISM   DISM Provider Store: PID=668 TID=2964 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\IBSProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM OS Provider: PID=668 TID=2964 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2015-01-15 08:44:26, Info                  DISM   DISM Driver Manager: PID=668 TID=2964 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\Wow64provider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Warning               DISM   DISM Provider Store: PID=668 TID=2964 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002)
    2015-01-15 08:44:26, Warning               DISM   DISM Provider Store: PID=668 TID=2964 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\Wow64provider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x80004002)
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\EmbeddedProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Warning               DISM   DISM Provider Store: PID=668 TID=2964 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\EmbeddedProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\AppxProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\AppxProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\AssocProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\AssocProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\GenericProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\GenericProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Loading Provider from location C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Connecting to the provider located at C:\Users\ADMINI~1\AppData\Local\Temp\1\D21CF440-1C72-4B67-8123-2368AD2490D7\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=2964 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Transmog Provider: PID=668 TID=2964 Current image session is [ONLINE] - CTransmogManager::GetMode
    2015-01-15 08:44:26, Info                  DISM   DISM Transmog Provider: PID=668 TID=2964 Audit Mode: [No] - CTransmogManager::Initialize
    2015-01-15 08:44:26, Info                  DISM   DISM Transmog Provider: PID=668 TID=2964 GetProductType: ProductType = [ServerNT] - CTransmogManager::GetProductType
    2015-01-15 08:44:26, Info                  DISM   DISM Transmog Provider: PID=668 TID=2964 Product Type: [ServerNT] - CTransmogManager::Initialize
    2015-01-15 08:44:26, Info                  DISM   DISM Transmog Provider: PID=668 TID=2964 Product Type ServerNT : [Yes] - CTransmogManager::Initialize
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AppxManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AppxManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AssocManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AssocManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericManager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericManager.
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2015-01-15 08:44:26, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=3652 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Provider Store: PID=668 TID=3652 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Processing the top level command token(enable-feature). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Encountered the option "featurename" with value "NetFx3"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Encountered an unknown option "featurename" with value "NetFx3"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Encountered the option "source" with value "C:\Users\Administrator\AppData\Local\Temp\1\NET35\x64"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-01-15 08:44:26, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Encountered an unknown option "source" with value "C:\Users\Administrator\AppData\Local\Temp\1\NET35\x64"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-01-15 08:44:36, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Feature NetFx3ServerFeatures with CBS state 4(CbsInstallStateStaged) being
    mapped to dism state 4(DISM_INSTALL_STATE_STAGED) - CDISMPackageFeature::LogInstallStateMapping
    2015-01-15 08:44:36, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Initiating Changes on Package with values: 5, 7 - CDISMPackage::Internal_ChangePackageState
    2015-01-15 08:44:39, Info                  DISM   DISM Package Manager: PID=668 TID=3652 CBS session options=0x20100! - CDISMPackageManager::Internal_Finalize
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 DismApi.dll:                                           
    - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 DismApi.dll:                                           
    - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 DismApi.dll: Version 6.3.9600.17031 - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 DismApi.dll: Parent process command line: C:\Windows\system32\wbem\wmiprvse.exe - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Enter DismInitializeInternal - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Initialized GlobalConfig - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Initialized SessionTable - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Waiting for m_pInternalThread to start - CCommandThread::Start
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=2908 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 m_pInternalThread started - CCommandThread::Start
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Created g_internalDismSession - DismInitializeInternal
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=2908 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
    2015-01-15 08:44:56, Info                  DISM   API: PID=3004 TID=1320 Leave DismInitializeInternal - DismInitializeInternal
    2015-01-15 08:45:00, Info                  DISM   DISM Package Manager: PID=668 TID=3524  Error in operation: (null) (CBS HRESULT=0x80091007) - CCbsConUIHandler::Error
    2015-01-15 08:45:05, Error                 DISM   DISM Package Manager: PID=668 TID=3652 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x80091007)
    2015-01-15 08:45:05, Error                 DISM   DISM Package Manager: PID=668 TID=3652 Failed processing package changes with session options - CDISMPackageManager::ProcessChangesWithOptions(hr:0x80091007)
    2015-01-15 08:45:05, Error                 DISM   DISM Package Manager: PID=668 TID=3652 Failed ProcessChanges. - CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x80091007)
    2015-01-15 08:45:05, Error                 DISM   DISM Package Manager: PID=668 TID=3652 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80091007)
    2015-01-15 08:45:05, Info                  DISM   DISM Package Manager: PID=668 TID=3652 Further logs for online package and feature related operations can be found
    at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-01-15 08:45:05, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80091007
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Package Manager: PID=668 TID=3524 Finalizing CBS core. - CDISMPackageManager::Finalize
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(GenericManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: GenericManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:05, Info                  DISM   DISM Provider Store: PID=668 TID=3524 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2015-01-15 08:45:06, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-01-15 08:45:06, Info                  DISM   DISM.EXE:
    2015-01-15 08:45:06, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-01-15 08:45:06, Info                  DISM   DISM.EXE:
    2015-01-15 08:45:06, Info                  DISM   DISM Provider Store: PID=796 TID=816 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    I also tried another off line installer from
    https://onedrive.live.com/?cid=27e6a35d1a492af7&id=27E6A35D1A492AF7%21397
    Again the VHD, VM image is from Microsoft's web site. I am not sure the .Net 3.5 Framework files are even included in this image. Do you know where I might find them?
    htm

  • P2V SQL Server 2008 R2 HYPER-V Clustering

    Hi all,
    i have current sql server 2008 environment which have the following requirements:
    1. SERVER A with failover cluster 1 node server (physical server)
    2. 4 shared disk storage (SAN)
    3. The connectivity is HBA
    i am supposed to migrate the existing into hyper-v environment which the following information detail:
    1. provision CSV in the same storage with existing 4 shared disk storage
    2. SERVER B (HYPER-V will be deployed for future sql server cluster)
    the scenario is we want to migrate the server A to Server B. 
    Please correct my plan as the following detail:
    - We want to P2V the existing into SERVER B (Hyper-V).
    here is my questions 
    1. is it possible the vhd after P2V process is attached into CSV storage ?
    2. is it possible the shared storage in the previous environment is re-mapping volume into the Hyper-V ?
    sorry if my thread is disorganized, i am novice in this case. need your kind advice for the best practice solve this issue.
    please tell me if there is anything less clear.
    Best Regards,
    ari

    First question is why do you want to P2V?  It does not take that much effort to create a new VM and then use SQL tools to backup and restore the databases into the new environment.  Then you are using known and proven tools instead of trying to
    make everything work from a P2V.
    When you P2V, the process will create virtual hard drives from each physical drive.  If you want to make your SQL Server into a VM, it does not make sense to keep the storage on pass-through disks.  It is better to use VHDs for the storage of a
    VM.
    Having single node clusters does not make much sense, unless the idea is to immediately add a second node when available. 
    . : | : . : | : . tim

  • When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

    This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
    There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
    Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
    EDIT: [Redacted]
    EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
    I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
    second time, it installed fine.
    I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
    That is when I tried another install of Server 2008 and received this error message about an answer file.
    I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
    answer file.
    I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
    Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

    Hi,
    As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
    I asked "OEM or retail" because of this known issue:
    "Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2425962
    An answer file may already contain in the disc which causes the issue.
    If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
    If you have any feedback on our support, please send to [email protected]

  • Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

    Hello,
    I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
    simple shared folder on  2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
    supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
    Any help is very welcome because things are urgent!
    Authentication failure

    That method in workgroup mode may be a problem.
    Authentication in SQL Server
    Might ask them over here.
    SQL Server forums on
    MSDN
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Server 2008 R2, XP SP3/7 64bit client remoteapp dragging window problem

    I'm running a small remoteapp server farm in 2008 R2 and am experiencing difficulties with some applications when dragging windows about.
    The problem happens when moving windows around by left click and dragging, they seem to get 'undropped' even though the mouse click is still applied (happening on multiple users) This is usually within the application where 2 documents are open. Moving dockable
    toolbars around is also a problem
    I've tried remote desktop connection onto both the servers and it appears to work with no problems.
    Environment:
    Server 2008 R2 (2 of configured as an RDP farm) 
    XP SP3 clients
    7 Pro 64 Bit
    Photoshop CS5
    Anyone have any ideas/links to hotfix which addresses this?

    Hi,
    Thank you for your reply.
    As the other build-in Windows application is working fine, it seems to be a compatibility issue. Please consider using the “RDS Application
    Compatibility Analyze” below to test the application if meets the requirement of RemoteApp.
    How to detect RDS-specific application compatibility issues by using the RDS Application Compatibility Analyzer
    http://blogs.msdn.com/b/rds/archive/2010/01/19/how-to-detect-rds-specific-application-compatibility-issues-by-using-the-rds-application-compatibility-analyzer.aspx
    Thanks.

  • Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

    After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
    could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

    Hi,
    à
    Removal of the patch resolved the issue.
    Thanks for sharing in the forum. Your time and efforts are highly appreciated.
    On current situation, would you please let me confirm something more?
    Please check if this update rollup package (KB2995388) install successfully.
    Please run sfc /scannow command to scan all protected system files after installed this update.
    If be possible, please re-install Print Server feature on the server after installed this update. Any find?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Server 2012 R2 Hyper-V Host Loses Network Connectivity

    Here's the scenario...
    We have two 2012 R2 Hyper-V hosts (VM1 and VM2) in a cluster that have 8 virtual machines that live on them. The servers are each utilizing three network connections that are teamed (Switch Independent, Address Hash).  They all go to the same switch.
    Three nights ago at approximately 11:30 PM VM2 lost network connectivity. The server was up it was just inaccessible from the network. I could not ping in or out from it, no internet connection, yet the network connection icon did not show that it was
    disconnected.
    Two nights ago we had no issues.
    Last night, same thing happened at 11:30 PM. VM2 loses it network connection.
    The only thing that seems to fix the issue is a reboot. Once the server comes back up everything is back to normal.
    Anyone have any idea what is happening here? I do not see anything that sticks out in the logs that could point me in the right direction....

    Hi Sir,
    Based on my experience , first you may need to keep the physical NIC driver up-to-date .
    Also please check if there is "VMQ"/"virtual machine queue" property in advanced properties of physical NICs:
    If yes please disable it for each team member then check the result .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Server 2008 R2 : How to force a NIC to keep his profile (Public, Domain, Private) ?

    Hi,
    I have a weird issue on 2008 R2. I just finished installing a 2008R2 server, with 2 NICs. I did not change any setting, except IP addresses. I configured the following IP addresses :
    - NIC1 : 192.168.0.1
    - NIC2 : 131.107.0.1
    The weird thing is : The two NICs automaically merge in the same Network Public profile. If I join the server to a domain, the 2 NICs again join the same Domain Profile.
    I wanted to install DirectAcess. But ; DirectAccess does require one of the NICs be identified as having a Public Profile.
    I did read some interesting articles on "Network List Manager Policies" GPO. But these did not help me avoiding the merge of the two profiles.
    Thanks in advance for any help.

    Hi,
    Thanks for your posting.
    During a search for a domain controller, the Locator attempts to find a domain controller in the site closest to the client. When the domain that is being sought
    is a Windows 2000 or later domain, the domain controller uses the information stored in Active Directory to determine the closest site. When the domain being sought is a Windows NT 4.0 domain, domain controller discovery occurs when the client starts and uses
    the first domain controller that it finds.
    It’s almost impossible to specific Domain Controller in one site for workstations. Active Directory has its own DC locate mechanism, we can’t interfere
    manually.
    We have a workaround to achieve that: create a new site, and then move your 2008r2 DC to the site. Modify IP configuration of your test clients with the same subnet
    of your 2008r2 DC.  Then these clients will contact its closest 2008r2 DC.
    Or for test reason you can shutdown other DCs, leave the 2008r2 DC only.
    For more information please refer to following MS articles:
    Finding a Domain Controller in the Closest Site
    http://technet.microsoft.com/en-us/library/cc978016.aspx
    How Domain Controllers Are Located in Windows
    http://support.microsoft.com/kb/247811
    Create a Site
    http://technet.microsoft.com/en-us/library/cc772304.aspx
    Lawrence Lv
    TechNet Community Support

  • Oracle RAC 11G Configuration on windows server 2008 Using Hyper V

    Hi,
    I want to implement 2 node RAC with CENTOS As my virtual machine using microsoft Hyper V.
    I am confused about this ip setup Especially private and VIP.
    Can anyone help on this please
    Thanks,
    Vinodh

    Yes thanks for the reply. i did that yesterday with Oracle VM and i am almost finished with my setup.
    Found this article on net which has clear explanations. If someone need this it they can use this.
    http://www.lab128.com/rac_installation_using_vb/article_text.html
    Anyway once i fully complete this setup will close this thread until then in case of doubts i will update here.
    Thanks,
    Vinodh

  • WHILE INSTALLING LYNC 2010 IN SERVER 2008 R2 AND NOT SHOWING COMPLETE OPTION AFTER FINISH

    hmmm

    Hi,
    Please make sure you’re logged onto the server with a domain user account that’s both a local administrator and
    a member of the RTCUniversalReadOnlyAdmin group.
    Best regards,
    Eric

Maybe you are looking for

  • Problem :ALV:Deletion Flags not showing in output

    hi all ! I have a alv program which displays customer data.there are three deletion flags columns in the output. First deletion flag will be: KNA1-LOEVM Second deletion flag will be: KNB1-LOEVM Third deletion flag will be: KNVV-LOEVM earlier all thre

  • How do I resize all symbols in a project???

    So I'm trying to figure out how I can scale my flash project to fit the screen. The problem is that when I export the project to an .avi there is a huge white background that is still showing in the project. I tried to scale the whole project up by s

  • My iphone 4s has a box around one of the icons and i have to double click on an icon to get anything to work and it won't reset either?

    I'm no sure what to do with my phone.  I have an iphone 4s that has an outlined box around whatever icon i touch.  It won't reset either.  It also is working slow too.  I have to double click on whatever icon i'm trying to use just to get it to work.

  • Mail Notification Options

    I am trying to find some different mail notification options for Mac Mail and can't seem to come across anything (good). I run my business email through Mac Mail and would like to know when I get email from those accounts. The prefs only give you the

  • How do I get my autogenerated service code to update

    If I add some extra columns to me database table , how do I get my autogenerated service code to update? I know how to refresh the service but that doesn't appear to update any of the stuff like this with the new columns      // initialize property m