Server 2012 Backups

Hi
I have recently bought a new server and purchased Server 2012 licenses. I am now trying to configure backups and I am not seeing the option to backup to the tape drive on the server.
I am unable to use the tape drive unless I buy a third party product ?
I am able to backup shared drives ?

Hi,
Yes, if you store backups on a remote shared folder, only one version of your backup will be maintained.
For more detailed information, please see:
Windows Server Backup Overview
http://technet.microsoft.com/en-us/library/cc772523.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Manage Server 2012 Backups from Windows 8.1

Hello,
I am trying to find out if it is possible to manage server 2012 backups from a windows 8.1 workstation via GUI or is the CLI the only option?
I found a few articles online that mention to use a computer management console > storage > backup (but from what I know it only works if you're connecting from a 2012 server itself)
Thank you in advance!

Hi,
We cannot manage server 2012 backups from a windows 8.1 workstation. Ye may need to use Remote Desktop Connection to access server 2012 from windows 8.1 workstation. In additional, we could manage server 2012 essential backups using dashboard on Windows
8.1 workstation.
For more detailed information, please refer to the article below:
Get Connected in Windows Server Essentials
http://technet.microsoft.com/en-us/library/jj713510.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is it possible to restore Windows server 2012 backup to another physical hardware or virtual machine?

Hi
I have windows server 2012 which is my domain controller. It has 2 hyper visor virtual machine that they are 2012 too. I have an additional domain controller in another location too.
I want to know, how can I restore a bare metal or system state backup to another machine, to have a domain controller same as old one whit all the properties, rules and features.
Thanks

Hi Mehdi,
Yes, it is possible to restore Windows backup to a different machine with different hardware. This article, although written for Windows Server 2008 still applies in 2012:
https://support.microsoft.com/en-us/kb/249694
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Server 2012-Backup failure on every other day

Hello All
We have a windows 2012 server which is a Hyper V server and we are experiencing a very strange issue with windows backups.
Backups are failing on every even day but getting successfully completed on every odd day.
Can see the following on Application Log.
Faulting application name: wbengine.exe, version: 6.2.9200.16384, time stamp: 0x50108cb6
Faulting module name: blbsrv.dll, version: 6.2.9200.16384, time stamp: 0x501091ac
Exception code: 0xc0000005
Fault offset: 0x0000000000061422
Faulting process id: 0x2c0c
Faulting application start time: 0x01cee665c4978b52
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\system32\blbsrv.dll
Report Id: 5b55e5e0-525c-11e3-940b-e0db5508e6cc
Faulting package full name:
Faulting package-relative application ID:
Also the following on the system log
The Block Level Backup Engine Service service terminated unexpectedly.
It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
No errors on the backup log.
Regards,
Dhanushka

Dhanushka,
You can follow this steps:
1. Remove/backup the log files: C:\Windows\Logs\WindowsServerBackup
2. Uninstall the feature: "windows backup server"
3. Restart the Server
4. Install the feature: "windows backup server"
5. Open Cmd (with admin rights) run: wbadmin delete catalog C:\Windows\system32>wbadmin delete catalog wbadmin 1.0 - Backup command-line tool (C) Copyright 2012 Microsoft Corporation. All rights reserved.
Are you sure that you want to delete the backup catalog? If you delete the catalog, you will need to create a new set of backups. [Y] Yes [N] No y
The backup catalog has been successfully deleted. C:\Windows\system32>
6. Start the Backup Service
7. Recreate the backup Job and Services.
Done! Or Please check this link and it will help you.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6f6c7b05-892f-4cf1-bfbe-f5e4ae748414/wbadminmsc-on-windows-server-2012-fails-to-start-in-mmc-with-error-wbengineexe-0xc000005?forum=windowsbackup
Best Regards,
Dinesh Patil. MCP-Windows Server 2003
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. If you satisfied with answer,please click on Proposed as answer key.

Easy Server 2012 backup solutions with tape support?

We have several smaller to midsized customers that have invested money in tape drives and tapes. They are using Symantec BackupExec on Server 2003 / 2008 and 2008 R2. Unfortunately, Symantec postponed Server 2012 support in their products many times
already. This fact costs us many business opportunities to upgrade infrastructures to Server 2012.
DPM 2012 is good for larger customers, but less suited for smaller companies (and the DPM "philosophy change" of the backup procedures, compared to older tape based backup solutions is an obstacle as well.)
So we are looking for EASY backup solutions that support tape drives and server 2012. The "perfect" product for us would be just a tape driver and an extension to the integrated Windows Server Backup that would allow to store backups on tapes,
the same way that Windows Backup allows backups to network shared folders.
Does anyone knows EASY backup software that provides this functionality? I'm also very interested in feedback from peoples that have successfully used such products on Server 2012 and are satisfied with them.
Thank you all in advance for any help.
Franz

Looks like we are in the same boat here with 2012.
For all its trouble, BackupExec has been instrumental for us in providing our customers with a backup application that no other software vendor has been able to match. This includes:
1) Granular backup and restore of Exchange allowing the restore of individual mailboxes and single mail items
2) The same Granular backup and restore of Hyper-V's VMs
3) The ability to backup to Tape, Removable USB HDD and NAS and Network shares
Not even Shadow Protect cuts the mustard anymore – it’s become simply “stupid”.
Although we love the simplicity and robustness of Windows Backup, there are some very serious deficiencies including;
1) The extreme difficulty of adding additional USB HDD after the backup schedule has been created. I believe that this has partially been resolved in R2 but in 2012 it was a utter mess-up. We
resorted to hooking up two 5-port USB Powered Hubs so we could make sure that all USB HDDs could be included in the schedule - what a mission! One blown hub after the other - couldn't find one that could handle the electrical current load of 5x USB HDDs!
2) No Granular restore ability of nothing... had to resort back to the "old school" ESEUTIL "after" restoring the entire Exchange database to alternate location.
3) Backup to a Network Share is pathetic - can't store more than the current backup. What use is that? Had to resort to backing up to Network Share then including that backup in another Windows backup - go figure!
Like Franz, our customers have invested HEAVILY in Tape Drive hardware (some of which cost the customer in excess of $8000) and that excludes the cost of Symantec BackupExec.
Although BackupExec 2012 now supports Server 2012, the re-purchase of the software is not a consideration to most of our customers.
Sorry Franz, I don’t have a solution for Tape Drives yet. This is one reason why we have stayed away from deploying 2012 that already have a recent investment in Tape Drive technology.
However, because there is NO other backup solution that compares to Symantec BackupExec (version <2010), we have been successfully implementing a hybrid solution (which, unfortunately, still does not include Tape Drives) including our own business.
As BackupExec 2010 does not support Windows 2012 as a “Media Server” there IS a workaround in a “virtual environment”.
We have successfully installed BackupExec 2010 on a Hyper-V Virtual Server as the “media server” and targeted the backups to shared folders on both NAS and removable USB HDD shares (off the Host Server).
Although it works GREAT, there is still the serious deficiency of not been able to use Tape Drives (unless some really bright spark out there has an idea on how to make a Tape Drive accessible to a VM).
Another REALLY good solution in which we deployed just last week was to supply the customer with a dirt-cheap PC, install it with Windows 2008 and the Tape Drive and schedule all the normal (and yummy) BackupExec 2010 granular backups to. Remember, the BackupExec
agent WILL install and run just fine on Server 2012 - no problems there.
This has become an INSTANT hit and this is OUR solution – a very small price to pay for “real granular” backups to Tape Drive.
I hope that you find that the mentioned "good solution" a viable and cost-effective workaround.
Backup Exec DOES NOT support Windows 2012. I just got of the phone with them today April 24, 2014. I have been using BE since Seagate made version 7. Every product Symantec buys eventually turns to crap! I just left Symantec Endpoint
Protection after 13 years because it is unreliable and has very poor detection compared to other products. In fact, it is so bad, that Symantec won't participate in any third-party evaluations that they don't pay for such as AV-Comparatives.org.
Don't let the door hit you on the way out, Symantec!

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Daily Server 2012 backups to different drives

We have a Windows 2012 server that runs AD and Hyper-V with 2 VMs. Total disk space is 2TB. We have 5x 2TB USB disks that are rotated daily from Monday to Friday. Currently I have a scheduled task that fires off a batch file with the following in it:
wbadmin start backup -allcritical -systemstate -include:"c:" -backuptarget:E: -vssfull -quiet
WSB backup performance is currently set to "Normal backup performance".
The reason I went this route is because I had issues trying to get WSB to use all 5 drives in rotation through the GUI. Connecting all 5 drives at the same time when setting up the backup is just not feasible.
When I initially configured the backup it ran fine for the first 2 weeks whereby the backups would take about 16 hours to finish which was fine (starting at 6pm and finishing around 10am the next day). For some reason now the backups are taking around 26 hours
to finish which I don't understand as the size of the data hasn't changed much.
I have now changed the performance to "Faster backup performance" but I'm not sure if it will work with the drives being changed daily as the comparison of say Monday's snapshot on the server will be different to the backed up data on Tuesday's drive.
Or alternatively, if the comparison of changes is only done on the server and the differences are copied across, will it cause issues when trying to restore the backup?
Basically what I need to achieve is:
- The RPO is 1 day so that in the event of catastrophic failure we need to be able to restore the server completely to the previous day (obviously within reason of when the catastrophe occurred).
- We need 5 days worth of backups from Monday to Friday.
- Each drive is swapped out daily to be taken off site.
If I need to look at doing a full backup every weekend and leaving a single drive connected for the week for "incrementals" then I can discuss that with the managers but that would change the RPO to the previous week instead of the previous day if
the building burns down for example.

Thanks for the feedback PrashKom. What difference will leaving out -backuptarget make? From what I can see at http://technet.microsoft.com/en-us/library/cc742083.aspx it is required to have that switch.
Changing the backup performance doesn't seem to have made any difference in terms of the speed it takes as it is only on 68% complete 13 hours after starting.
Do you think there will be any difference in changing from wbadmin start backup using task scheduler, to using wbadmin enable backup? I see in http://technet.microsoft.com/en-us/library/cc742130.aspx that they have "wbadmin enable backup –addtarget:H:"
but from my understanding is that setting the schedule will remove the drive letter and rename the drive like it does in the GUI.

How to Secure SQL SERVER 2012 Backup without using TDE or any thirdparty backup solution

Hi Experts
Actually I was using backup set password feature for MS SQL SERVER 2008 but it is dropped in new versions (2012 & 2014). Please suggest some options to making the backups secure without using TDE or any third party tools.

Hi khalil_pak,
The WITH PASSWORD feature didn't really encrypt your backup. It just made it difficult for someone to accidentally restore the backup when they were not allowed to. And as other post, the password option is weak and could be broken easily.
The only true way to protect the data is to encrypt the data at the source by encrypting the database with
TDE. Or you can choose to use
cell-level encryption to encrypt sensitive data.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

How to create Auto weakly backup in Windows Server 2012

Hello
1. I want to set auto backup in windows server 2012 Weakly.
2. can i Set auto backup like a normal data copy.

By configuring automatic backup, you can schedule this task according to your choice(weekly/monthly). You can use backup schedule wizard accessed from the Windows Server Backup user interface (Wbadmin.msc).
To schedule backup task by using powershell, please checkout this link :
http://technet.microsoft.com/en-us/library/dd759156.aspx
Also, have a look at here :
http://technet.microsoft.com/en-us/library/cc770757.aspx

Backup Windows Server on Windows Server 2012

We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
feature several times and still nothing.
I am new to the forum, so descupem me if there is another topic like this.

Hi There,
Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
Good Luck

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

How to restore a database backup taken from a SQL Server 2012 instance to SQL Server 2014

I am trying to restore a database backup taken from a SQL Server 2012 instance to my new SQL Server 2014 instance. When I add the .bak through the Mgmt studio UI, it does not seem to find a backup set in the file so I cannot proceed (does not give
me any errors though either. I tried restoring through TSQL command but only got a database restore terminating abnormally error with no other details. How can I restore this database to SQL 2014?

Hello,
Please examine SQL Server Error Log and share with us any error you can find. The following article may locate the log:
http://msdn.microsoft.com/en-us/library/ms187109.aspx
Regards,
Alberto Morillo
SQLCoffee.com

[Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials

Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
1. Server Backup
Description:
Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
Operations:
On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
Start a backup for the server. (Figure 1)
Figure 1
More information:
Manage server backup in Windows Server Essentials
Restore or repair your server running Windows Server Essentials

3. Microsoft Azure Backup
Descriptions:
Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
Operations:
1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
Backup integration module”.
Figure 3
Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
Tools-> Internet Options-> Security->
Trusted sites-> Add this website to the zone and add
http://downlaod.microsoft.com,
https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
Figure 4
2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
InstallAddin log file if you can find some clues.)
3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
and Figure 6 show.
Figure 5
Figure 6
4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
Upload a certificate. (ii) Register your server.
(iii) Configure backup settings.
Figure 7
(i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
Please logon Windows Azure, select RECOVERY SERVICES and click
NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
QUICK CREATE. Please type NAME and select
REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
a public key for the vault. The certificate is used to register servers with the vault.
Figure 8
(ii). Register your server
On Dashboard, navigate to Online Backup and click Register. (Figure 9)
Figure 9
Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
Figure 10
When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
Figure 11
(iii). Configure backup settings
When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
all process will be shown in Figure 12-16.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
Figure 17
On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
Figure 18
After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
Figure 19
Figure 20
More information:
Manage Online Backup in Windows Server Essentials

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Joseph

i have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph

Server 2012 Backups

Similar Messages

Maybe you are looking for