Server 2012 - Can't access external website from internal domain with same name. Tried everything.

Hello All.
I have read loads of forums and tried numerous fixes and configurations, but nothing seems to work and I am extremely frustrated at this point.
I have a client where I setup Server 2012 Standard with Exchange 2013. After reading best practice documentation for DNS naming and reasons not to use ".LOCAL" I opted to use ".com.na" in which case the Internal Domain Name and Internet
Website now has the same name.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view this
directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
I am so sick and tired of this issue that iI am at the point of backing up the Exchange and re-rolling the entire server with the ".local" DNS domain name. I have a mirror setup in a VMWare environment and simply using "rendom" to rename
the domain seems to cause new issues with Exchange connectivity.
Any pointers and help will be greatly appreciated.
Thanks in advance.
Hentie Loots

I opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?

Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
          although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

Firefox/IE/Chrome can't access one website from several computers

There is one website I cannot get onto from several computers if I try using Firefox / Ie or Chrome. All computers can access the site using AOL browser (and we connect to the internet through a router and AOL is our ISP). I can also access it via iphone and I know that there is no problem with the actual site.
Actually we cannot access any site that we know of on that particular server - it is as though it has blocked access from our ip address but only when Firefox/Moxzilla or Chrome. But none of our computers have problems elsewhere on the internet it seems to be just that one (server/website).
This started suddenly this a few days ago and is driving me mad.
I have checked that Norton Firewall settings and all are allowed to access the internet and the ip address or sites aren't blocked.
Our settings on AOL/IE/Firefox for accessing the internet all say auto-detect proxy setting.
I have asked the owner of the server to check at their end that we aren't on a blocked list - we aren't.
I am not sure what to do next - any ideas welcome.

This is the first time I have used this forum and I did put in the web address actually - I don't know why it didn't show. It is www.chardswimming.org.uk.
I posted it in Firefox because that is the browser that I mostly use and normally find it to be great without problems - I am not necessarily saying it is a firefox problem and I actually thought someone would try and be helpful rather than try and pass the buck like people from other software companies would.

Help - can't access one website from my Macs, but I can on my PCs

A couple of days ago, I stopped being able to access at least one specific website on my Mac.
It’s my own domain so I haven’t been banned or blocked.
Everyone else can access the site, so it’s not down.
I can access the site from the PCs in my house, so it’s not an ISP issue.
I cannot access it from FTP, Firefox, Safari, or anything else on my Mac, so it’s not a browser issue.
I can access every other site I’ve tried, so it’s not an internet issue.
I’ve repaired permissions. I’ve rebooted several times.
What gives? Any ideas?
I just tried it on my brother’s computers on the SAME network. His PC could access it but not his Mac. So it appears isolated to Macs on this network.
I'm baffled.

Have tried everything: - all the suggestions on this page, and from this thread too: http://discussions.apple.com/thread.jspa?threadID=755113&tstart=135
Using Asante FriendlyNet ethernet hub
Neither a G4 desktop or an iBook can connect to these sites:
<mainstayfunds>
http://206.210.18.59/
http://206.210.28.59/
<newyorklife>
http://206.210.18.33/
http://206.210.28.33/
My ISP provided the DNS information to try (oh, yeah, the ISP can access all the sites)
These actions were unsuccesful:
Three browsers
Bypassed hub and connected Mac to cable modem directly
Disconnected power from cable modem 2 minutes
Norton Firewall disabled
Used different hub port
Restarted
Signed out
Deleted Safari plists
Emptied Safari cache.
Deleted Safari cache folder
Dragged InputManagers from their folders
Repaired permissions
No Network Proxies enabled
TCP/IP setting of the computer is set to DHCP - obtaining IP
address and DNS server IP address automatically
G4 1.0Ghz Mac OS X (10.4.9) Safari 1.3.2 (312.6)

Can't access some websites from XP machines on the network, but Win7 PC's ok

Hi,
We have a SBS installation with both XP and 7 PCs on it. Within the last couple of weeks the XP units have become unable to access certain websites, although others are ok. Windows 7 PC's are fine. Pings to the affected sites are also ok from either XP or
7. Despite a lot of effort trying to discover the reason we are not any closer to a solution. Could anyone suggest how we might track down the source of the issue ?
Many thanks

Hi,
Please try to reset the IE on the XP client. This issue may be caused by misconfiguration of the Internet Explorer.
Please check if there is any firewall rule block the TCP port 80 of the specified website.
To check if the TCP port 80 is open, please use the portqry tool.
To download the portqry, please click the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=24009
If the TCP port 80 is block on the specified website, please check the network settings. Normally, this issue is caused by the misconfiguration of the firewall. Also, incorrectly configured proxy or router will cause this issue too.
If the TCP port 80 is open, we may need to perform a network capture on the XP client.
To download Network Monitor, please refer to the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

DNS (internal domain has same name as external website)

Our internal domain name is called "abc.com" and our company website is called "abc.com". I have created an "A" record that points to
www.abc.com so staff can browse the website from within the office. The problem is that if people enter "abc.com" from a web browser with the office it does not resolve in an efficient manner. Can someone please
help?
Interflex

Hi Interflex,
I agree with Ace’s option 2 and 3 just like what I thought.
I still consider the idea which Jorge provided about prevent register DC’s A record . This probably cause some un-expected issues,
because this record is used for DFS and GPOs. So I don’t recommend this method.
Meanwhile , I have thought as same as Ace’s second suggestion, if the environment or policy of your company allow deploy IIS on your
DC server , I thought this could be a possible resolution.
And I have a tips for your reference. If client’s browser is IE, by default, when you type web address in address bar,
and press “ Ctrl + Shift +Enter “,IE will auto add Prefix WWW to the beginning of typed web address. In your case , users just type “abc” in address bar, and press “ Ctrl + Shift +Enter “
You can set this at “Prefix and Suffix option” which located at “Internet Options”/ “General”
Tab / ”language” button.
Thank.
Tiger Li
Hi Tiger,
I've actually found by default, just hitting Ctrl + Enter (without the shift key) puts in the 'www' and 'com.' but it only works for the 'com' TLD' by deffault. I guess you could add 'net' in the General tab, Language, suffix option to use ctrl-shift-enter,
or whatever the actual internal TLD name is.
Cheers!
Ace
Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003, Microsoft Certified Trainer, Microsoft MVP - Directory Services. This posting is provided AS-IS with no warranties or guarantees and confers no
rights.

New Column Still Defaulting To Value From Deleted Column With Same Name

This is strange. I had a managed metadata column called "Document Category" attached to multiple content types and set to a default value (different in each library). Then I deleted the column (all instances from libraries and references from
content types as well), and created a new site column with the same name, but a Choice field instead. The libraries that had a default value for the original column, are still populating new documents using the original default value, and it's showing up as
something like 88;#Hospital Correspondence|4b1e8da6-8653-492a-3e45e6c56c38 . The column is still a choice field, so I don't even know why it allows this value. Does anyone know why this is happening or how to fix it?

Hi Vince,
Thank you very much for sharing your solution here. It would be helpful for others who encounter similar issue.
Thanks again,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

After 10.9.4 update can't access certain websites from any browser

I just updated to 10.9.4 Saturday evening the 26th.   Sunday morning I noticed that I was unable to get to some websites but they worked from the ipad and other devices in the house so I rebooted thinking something odd was going on post update.   It happened again a few times until I realized a pattern. I can not get to facebook, mail.google.com, google.com or most SSL only websites. Sites that redirect you to an SSL URL just sit there until they eventually time out. I can go to cnn.com but I can't load apple.com
if I try to go to bing.com which surprisingly doesn't force you to SSL it loads every time.   This is reproducible in SafarI, Firefox, and Chrome consistently. Rebooting no longer resolves the issue and I couldn't even come here to post this from the iMac because the discussion website eventually forces you to use SSL. (Actually, while posting this that URL eventually appeared after a very long wait. Other websites eventually time out entirely. Safari fails to load Facebook at all)
EtreCheck version: 1.9.12 (48)
Report generated July 28, 2014 at 12:31:05 AM EDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2560 x 1440
DELL 2208WFP 1680 x 1050 @ 60 Hz
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 1:9:53
Disk Information:
APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 999.35 GB
Recovery HD (disk1s3) <not mounted>: 650 MB
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
Hitachi HDS723020BLA642 disk2 : (4 TB)
disk2s1 (disk2s1) <not mounted>: 66 KB
G-RAID (disk2s3) /Volumes/G-RAID: 4 TB (1.38 TB free)
USB Information:
Seagate Backup+ Desk 3 TB
EFI (disk5s1) <not mounted>: 314.6 MB
disk5s2 (disk5s2) <not mounted>: 3 TB
Boot OS X (disk5s3) <not mounted>: 134.2 MB
Seagate Backup+ Desk 3 TB
EFI (disk4s1) <not mounted>: 314.6 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
SCM USB3.0 CF SD
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
LaCie eSata Hub
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded]at.obdev.nke.LittleSnitch (3883 - SDK 10.8) Support
[not loaded]com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[loaded]com.adobe.fpsaud.plist Support
[loaded]com.bombich.ccc.plist Support
[running]com.cisco.anyconnect.vpnagentd.plist Support
[loaded]com.google.keystone.daemon.plist Support
[loaded]com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[running]com.adobe.AdobeCreativeCloud.plist Support
[running]com.brother.LOGINserver.plist Support
[running]com.canon.MFManager.plist Support
[loaded]com.cisco.anyconnect.gui.plist Support
[loaded]com.citrix.AuthManager_Mac.plist Support
[running]com.citrix.ReceiverHelper.plist Support
[running]com.citrix.ServiceRecords.plist Support
[loaded]com.google.keystone.agent.plist Support
User Launch Agents:
[loaded]com.adobe.AAM.Updater-1.0.plist Support
[loaded]com.adobe.ARM.[...].plist Support
User Login Items:
iTunesHelper
Arq Agent
VLCStreamer
Dropbox
ImageTransferUtility
WirelessCameraService
AdobeResourceSynchronizer
Internet Plug-ins:
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.6 Support
AdobePDFViewer: Version: 10.1.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
Citrix ShareFile Sync Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
fuse-ext2 Support
Printopia Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
G-RAID: Disk size: 4 Disk used: 2
Destinations:
Seagate Backup Plus RAID [Local] (Last used)
Total size: 5
Total number of backups: 62
Oldest backup: 2014-01-20 04:06:23 +0000
Last backup: 2014-07-28 03:53:23 +0000
Size of backup disk: Too small
Backup size 5 < (Disk used 2 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
     2%Google Chrome
     2%WindowServer
     1%fontd
     0%firefox
     0%hidd
Top Processes by Memory:
279 MBFinder
275 MBfirefox
221 MBcom.apple.ShareKitHelper
188 MBWindowServer
180 MBcom.apple.IconServicesAgent
Virtual Memory Information:
3.43 GBFree RAM
3.24 GBActive RAM
376 MBInactive RAM
975 MBWired RAM
922 MBPage-ins
0 BPage-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MSSQL Server 2012. Error accessing reporting website. Not Found The requested URL /ReportServer1 was not found on this server. Unable to uninstall MSSQL 2008

Hi all. I have recently installed MSSQL Server 2008, and was not able to access the URL when I clicked on it. It gave me a 404.
When I installed 2012, I tried the same thing and it also throws me a 404 error. How should I go about solving this? What are the log files that you may need to help me solve this?
At the same time, I have also tried to uninstall my 2008, but am always stuck at not being able to remove Client Connectivity Tools and some other components. Please let me know what log files you need and I will be happy to provide them. Thanks!
The following is the log for the uninstallation.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052368
Exit facility code: 1212
Exit error code: 1648
Exit message: Failed: see details below
Start time: 2014-04-11 09:40:30
End time: 2014-04-11 09:41:37
Requested action: Uninstall
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: ADC-PC
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: Singapore
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 Management Tools - Basic
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Management Tools - Complete
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Client Tools Connectivity
Enterprise Edition 10.50.1617.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation edition: EVAL
User Input Settings:
ACTION: Uninstall
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
ENU: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: CONN,SSMS,ADV_SSMS,CE_TOOLS,BROWSER,WRITER
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTANCEID: <empty>
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
Detailed results:
Feature: SQL Writer
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Browser
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Compact Edition Tools
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\SystemConfigurationCheck_Report.htm

Strange, but finally the procedure below did solve my problem.
# Go to Control Panel > Add or Remove Programs and look for '''Anti Phishing Domain Advisor'''.
# If you click on ''Click here for support information'' you'll see it is a Panda program.
# Uninstall '''Anti Phishing Domain Advisor''' program...
# This did solve my problem
See also [https://support.mozilla.com/en-US/questions/811399#answer-205531 Can't open mail. Get this message: 404 Not Found nginx/0.6.32]

Help! iPhoto alerts pop up that say, "The photo "DSC06691.JPG" cannot be opened because the original cannot be located." I can locate original, but I have multiple images with same name!

Recently my library prompted me to rebuild due to inconsistencies that were found in library. Now alerts pop up that say it can't locate the original of an image, so I have an option to cancel or locate it. I can locate the file, however, there are usually 2 or 3 photos with the same file name! Not sure which one it is trying to locate etc. I have a feeling this is the problem. Not sure how it happened. Has anyone had this happen to them?? iPhoto library hasn't rebuilt because there are so many pop up alerts...I have a feeling it's a big problem. I am going to attempt to select one image for each one and see what happens, but I am concerned what the outcome will be.
My camera cards are already deleted (I knew I should have kept them!!). We do have time capsule, so I am assuming I can go back, but I am worried that iphoto will do the same thing. It just started doing it about two weeks ago and it didn't correspond with any photo uploads. I hope someone can help!

Are you running a managed or referenced library?
If it's a managed library apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

After install Crystal Report Server 2011, can not access control tools

Afte install Crystal Report Server 2011, can not access control tools from web or from application.
My server OS is Windows 2008 R2 SP1. I follow the default setting. How to fix it?
Error message is above.

Is Tomcat started? On your Start menu you should have an option to get to "Tomcat Configuration" or, under the CRS menu you can run the "Central Configuration Manager" to start Tomcat.
What URL are you using to connect to the web app? By default Tomcat runs on port 8080 so your URL should look something like this: "http://<servername>:8080/BOE/CMC" or "http://<servername>:8080/BOE/BI".
If Tomcat is running and you're trying to access it from another computer, check to see if the Windows Firewall is turned on for the server - if it is, turn it off for "Domain" access.
If Tomcat won't start, go to the folder where Tomcat is installed and then look in the "logs" folder. There should be a file called "stderr.log" which you can open in Notepad to see what types of errors might be occurring (you can ignore any errors having to do with "persisted sessions".) If there are other errors, post in the BI Platform space to get assistance.
-Dell

After install Crystal Report Server 2011, can not access control tool

After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
Error message:

Seems like webapps are corrupted, Just redeploy the webapps.
refer the below thread to do the same.
http://scn.sap.com/thread/3400477

Server 2012 - Can't access external website from internal domain with same name. Tried everything.

Similar Messages

Maybe you are looking for