Server 2012: Enabling Hyper-V Replica Site to Site Failure

We recently installed Server 2012 Data Center with Hyper-V on a two servers at two different sites: Main Site and DR Site.
Hyper-V is enabled and working great at both sites on these servers and now trying to configure Hyper-V replica gets us this result:
Some of the items we made sure to verify:
Enabled Firewall rules for inbound rules on Port 80. (Hyper-V Replica HTTP Listener) (Both Sites)
Modified ASA Firewall for HTTP port 80 and can run a packet trace from site to site.
Ping works fine in communication between servers
Both are in the same domain
Within the same Trust Group
Same default storage location and can view the folder from each location
So I am not sure what we are missing, but is there another port that needs to be open if we are going through HTTP because after starting to configuring the replica another message shows that "Could not get the configuration details of the specified server."
Searching around on TechNet didn't show any resolution for this, but if anyone would have some additional tips to try to troubleshoot that would be greatly appreciated!
Thank you!
-Jeff

Hi All,
I am facing the same issue, Please let me the solution... I have given permission to user account at Local Groups in both nodes of Primary Site and DR Site.. and Windows Firewall is also off, IP Subnet is Different at both End...
Brief Description of Infrastructure.
We have Setup Windows Cluster 2012 Failover Cluster in Both Sites ( primary and DR) with the help of mentioned links.
http://www.thomasmaurer.ch/2012/07/hyper-v-replica-the-game-changer/
http://kristiannese.blogspot.in/2012/03/hyper-v-replica-by-example-part-one.html
Now, We want to cross-check Hyper-V Replica functionality but it is saying that Port 80 is not opened, Need Suggestion on same.
Windows Firewall inbound rules is already set as per above links.
Question: From where to where we need to open port 80 means which nodes/cluster/Hyper-V Broker ? As per mentioned cases.
Like,
Case 1. From Hyper-V broker of Primary Site to Hyper-V Broker of DR Site
Case 2: From Physical IP Address of Both Servers at Primary Site to Physical IP of Both Server at DR Site.
Case 3: From Cluster IP Address of Primary Site to Cluster IP of DR Site.
Case 4. From Physical IP Address of Primary Site to Hyper-v Replica Broker of DR Site.
Case 5. Port 80 need to open between Both End for Physical IP’s, Hyper-V Replica Broker and Cluster IP.
Kindly suggest on urgent basis.
Note: It is working fine in same IP Subnet, only change with different Subnet.
Please suggest from which IP to which IP , port 80 Need to be open in Mentioned scenerio.
Primary Site.
Host 1 IP address : 10.25.135.25
Host 2 IP address : 10.25.135.26
Cluster IP Address : 10.25.135.27
Hyper-V Replica Broker Role : 10.25.135.28
DR Site
Host 1 IP Address : 10.103.48.100
Host 2 IP Address : 10.103.48.101
Cluster IP address : 10.103.48.27
Hyper-V Replica Broker Role: 10.103.48.28
I hope , now you can help me.
Thanks
Kirpal Singh

Similar Messages

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

Server 2012 r2 Hyper-v guest network speed with 10 GB NIC's

Hi
Setting up a Server 2012 r2 Hyper-v host with an onboard 4 port 1 GB nic and a offboard dual port 10 GB nic. We are using the 1gb quad port for management. The 10 Gb we intend using for hyper-v guest use however we don't seem to be able to achieve very high
speeds though the 10 GB adapter when assigned to a virtual switch. Testing the 10 Gb nic from the host confirms that we can transfer/get 10 GB speeds. When assigned to a virtual switch however the speed drops to about 1-2 Gbps. Has anybody seen anything like
this ?. We've tried a variety of settings and i can confirm that the network traffic is using the 10 GB nic.

Hi,
I am almost certain what you see is by design. I don't want to go into to much detail because I'm in a bit of a hurry. But allow me to explain.
Suppose you have a 10Gb NIC interface and an multi-core CPU. When you have RSS (Receive-Side Scaling) disabled a single core can normally handing
around 2.5-4.3Gbps. When you enable RSS the data streams/traffic is spread across multiple cores.
But RSS is a network optimization feature for the Management OS, not for a vSwitch. Instead you should use VMQ (Virtual Machine Queuing). VMQ is
the equilavant of RSS, but then intended for VMs. But... there is a difference. VMQ does not spread single data streams/traffic across multiple cores. Instead is (dynamically) assigns each vmNIC its own core. So... you don't use multiple-cores at a time for
a single vmNIC. You can't use RSS and VMQ at the same time. Keep that in mind.
But... you can accomplish this by enabling vRSS as well. That's another story.
If you watch the following video, at the end you know all about VMQ.
Hyper-V dVMQ
http://www.hypervrockstar.com/tag/dvmq/
Boudewijn Plomp | BPMi Infrastructure & Security
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hyper v replica for multiple sites

Hi
I support 3 sites and would like two of them running hyper v to replicate back to the same replica site and server. Is this possible to have two hyper v sites replicate back to the same server based at another location or do they require their
own individual replica server?
Thanks in advance
Shane

Let us take 3 sites: A, B, C.
1) A -> C and B -> C: this is a supported scenario. C is the replica site for primary site A and primary site B. This is typically a hoster scenario, where C is the hoster with A and B being the customers replicating to the hoster.
This is supported in Windows Server 2012 and Windows Server 2012 R2.
2) A -> B -> C: this is also supported, and is called "Extended Replication". Both B and C are replica sites. This is supported only if B and C are on Windows Server 2012 R2 (site A can be on Windows Server 2012).

2012 R2 Hyper-V Replica and Cross Domain

Customer would like to user Hyper-V Replica, but their local site and DR site are different domains.
I know we need certificate. Is there any guide for this? I didn't find any configuration document, thanks.

Hi Sir,
Please refer to the similar thread :
https://social.technet.microsoft.com/Forums/windowsserver/en-US/420d239c-0475-480f-aa9c-c094d9ae226b/server-2012-hyperv-replication-cross-site-and-cross-domain?forum=winserverhyperv
Also the article below is a lab test about hyper-v replica based on certificate :
https://social.technet.microsoft.com/Forums/en-US/c3e309b6-1d5d-4e52-b859-cf36bd5af47d/forum-faq-how-to-implement-hyperv-replica-in-workgroup-environment?forum=winserverhyperv
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP:                     10.0.0.80
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:        10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP:                     10.0.0.12
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:         10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
Jay

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Server 2012 R2 Hyper-V Cluster - Losing connectivity to vLANs

Hi Everybody,
I am experiencing a strange issue with a Server 2012 R2 Hypervisor. There are two physical NICs teamed (one from on-board and one from expansion board), this team is assigned to a hyper-v virtual switch, there are four virtual network adapters
assigned to the switch (Backend, Heartbeat, Management & CSV/Live Migration).
The server has been running without issue for months but, all of a sudden has started to lose connectivity to the Backend and Heartbeat. The loss of connection only occurs once VMs are hosted on the server and it doesn't happen immediately, it can take
anywhere from 12 hours to several days.
There are no errors on the NICs or vNICs themselves and the configuration is intact. Once connectivity is lost to the Backend and Heartbeat, it remains that way and it seems the only solution so far is to reboot the server. Hardware diagnostics have been
run and revealed no issues. There are no useful events in event viewer, the alerts relate to the loss of connection to the cluster as a result of connectivity being lost on the Backend and Heartbeat.
I have 6 other hypervisors with the same network configuration that are performing without issue so, I don't believe the problem is the configuration. The only difference is the hypervisor that has the problems is a Dell Poweredge R620 and the other 6 are
Dell PowerEdge R610s.
Can anyone advise what might be the cause of these issues or, any event logging to enable that might help isolate where the issue lies.

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
The 3 for guests are not configured to allow host OS sharing.
We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
We do not have Jumbo frames enabled because of some issues with switching compatability.
I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
Any thoughts of where I might look to help diagnose this issue?

Hi ,
"1 connected to its own NIC. 1 for management and the 3 others for guests."
Also you mentioned that : " is only hosting these 24 VMs ".
First please try to disable the RSS in the property of the NICs for guests .
Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues" (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
the host and a default queue) .
If I understand correctly ,when you enable VMQ the number of connected VMs on that NIC should not be more than the value of "NumberOfReceiveQueues" -2 .
For details please refer to following link:
http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
Hope this helps
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2012 R2 Hyper V on a SBS 2011 Domain replication failure

I have a SBS 2011 Domain which I am adding two 2012 R2 Standard servers in order to facilitate virtualization and consolidate physical servers. I have the two 2012 R2 servers up and running and a test server running virtually on Hyper-V. I want
to test replication from one Hyper-V host to the other, however, I am unable to setup Kerberos delegation in the SBS 2011 AD domain. Specifically, the Service Type of Microsoft Virtual System Migration Service is not listed. CIFS is available,
however, there are no Service Types having to do with Hyper-V available.
I have upgraded the AD using adprep from the 2012 R2 installation disc, however, this has not added the service types.
Thank you in advance for the help!

Hi Justin,
Thank you for the information. I had originally reviewed the article you mentioned in your reply, however, this did not work for me. It accurately described the problem I am having, however, the solution did not work.
I did a little review of the syntax of the command SETSPN and found that the article referenced above has a "/" instead of a "\" in the command line. When I modified my syntax to reflect using the forward slash, the command seemed to processed
correctly, however, when I go back to the delegation steps, the service name is still not there. I did verify the service was registered properly by listing out all the SPN registrations.
Clarifying Question: Based on the command I ran to add this Service, I am wondering if I used the correct servers. Basically, I have the following:
Server 1 - SBS 2011 domain controller
Server 2 - 2012 R2 Hyper-V Server
Server 3 - 2012 R2 Hyper-V Server
I want to setup this Kerberos delegation for CIFS and Microsoft Virtual System Migration on Server 2 and 3 and am setting this up using ADUC on Server 1. I ran the SETSPN command on Server 1 for Server 1 - was this the correct thing to do or should
I have an SPN entry for Server 2 and/or 3?
Sorry for what is probably a very basic question.
Thank you again for your help.

VMM Agent install fails on Windows Server 2012 R2 Hyper-V

Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan Lakshmanan

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

WIndows Server 2012 w/ Hyper V and Windows 7

I have been able to create every imaginable virtualization in a test environment except for Windows 7. It asks for drivers. I have a driver CD but when I put the CD in the D: drive. It will run but suddenly the command line screen states that a file on
the F: drive does not exist. Where is this F: drive coming from?

I might have misstated my situation. I have Windows Server 2012 outfitted with Hyper-V. I'm trying to virtualize a Windows 7 operating system.
I found a another W7 media disk that seems to bypass this problem.

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Joseph

i have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph

Windows Server 2012 R2 - Hyper-V NIC Teaming Issue

Hi All,
I have cluster windows server 2012 R2 with hyper-v role installed. I have an issue with one of my windows 2012 R2 hyper-v host.
The virtual machine network adapter show status connected but it stop transmit data, so the vm that using that NIC cannot connect to external network.
The virtual machine network adapter using Teamed NIC, with this configuration:
Teaming Mode : Switch Independent
Load Balance Algorithm : Hyper-V Port
NIC Adapter : Broadcom 5720 Quad Port 1Gbps
I already using the latest NIC driver from broadcom.
I found a little trick for this issue by disable one of the teamed NIC, but it will happen again.
Anyone have the same issue with me, and any workaround for this issue?
Please Advise
Thanks,

Hi epenx,
Thanks for the information .
Best Regards,
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server 2012: Enabling Hyper-V Replica Site to Site Failure

Similar Messages

Maybe you are looking for