Server 2012 errors for timeout -- LDAP error number: 55 -- LDAP error string: Timeout Failed to get server error string from LDAP connection

Hello, currently getting below error msg's utilizing software thru which LDAP is queried for discovering AD objects/path and resource enumeration and tracking.
Have ensured firewalls and port (389 ) relational to LDAP are not closed, thus causing hanging.
I see there was a write up on Svr 2003 ( https://support.microsoft.com/en-us/kb/315071 ) not sure if this is applicable, of if the "Ntdsutil.exe" arcitecture has changed much from Svr 03. Please advise.
-----------error msg ----------------
-- LDAP error number: 55
-- LDAP error string: Timeout Failed to get server error string from LDAP connection

The link you shared is still applicable. You can adjust your LDAP policy depending on your software requirements.
I would also recommend that you in touch with your software vendor to get more details about the software requirements.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

I get the following error message whenever I try to access email from Dice JobAlert. I don't receive the error for any other email I receive and I also don't get the error message when I access the email using Internet Explorer.

This is the error message I received: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: http://sz0150.wc.mail.comcast.net/zimbra/js/Startup1_2_all.js.zgz?v=110527090709:822

Their browser detection script is out of date. The warning seems to come from this file: http://virus.info/api/load/file/js , specifically, the badBrowser() function.
It's checking for "Firefox/1", which it finds as part of "Firefox/10".
Perhaps point them towards this blog post: http://hacks.mozilla.org/2012/01/firefox-goes-2-digit-time-to-check-your-ua-sniffing-scripts/

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

Hi,
When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
+For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
    +Message no. NR751+
+Diagnosis+
    +The database table NRIV has the delivery class 'C', i.e. the SAP default+
    +settings are only in client 000.+
+Procedure+
    +Create the missing number range interval in customizing.+
    +Transaction code: FBN1+
When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
Sanjay

Hi,
You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
Steps:
Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
Hopefully it works for You............
Dipti

Trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

I have paid my subscription for Adobe Acrobat Pro but can not install it- I always get an error message -also I did not receive any instalation code...

I have paid my subscription for Adobe Acrobat Pro but can not install it… I always get an error message …also I did not receive any instalation code...

With the subscription you sign in with your Adobe ID that you used to order the subscription. By installation code, I assume you mean serial number. You do not get one with the subscription, but use your Adobe ID.

Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Edit

Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
I have since uninstalled and reinstalled the app, but get the same error message.

Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.

Server 2012 replacement for Server 2003 catalogs and ixsso.dll

Previously, we used the Indexing Service on Windows Service 2003 to set up catalogs and then used ixsso.dll to write web apps that could query the catalogs. With Windows Server 2012 things apparently have changed. How would I accomplish something similar
with Windows Server 2012? I've been searching but I guess I don't know what I'm looking for. Can someone point me in the right direction? What buzzwords am I looking for with Server 2012?
Thanks
Terry

Hi,
In Windows 2012 the indexing service has gone. To work around for this we may try putting the windows indexing service command line tool and dll’s in the System32 folder.
Regards,
Yan Li
Regards, Yan Li

Free Download Sql Server 2012 Full for windows 7 64 bit

hi,
im new here and i want to download sql server 2012 complete for windows 7 64 bit.
If any one help me to find it.

You need to buy SQL Server 2012 Developer Edition for 50$ or as Shanky_621 suggested
download a free edition named SQL EXPRESS which has some limitations.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps -- NON-Shared storage,standalone servers

1.Can any one provide the detailed steps for multi-subnet HA for Always ON Groups.
--SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps
2.Do we need VLAN or not for SQL Server 2012 on win 2012 ? provide details for this VLAN required or not.
--I read MS links, sql server 2012 and above VLAN not required.
Env:
SQL Server 2012
Windows 2012 R2(2 servers different location)
Non-Shared storage (stand-alone servers)
Always ON Availability Group
I have seen white papers,but did not have detail step by steps.
Thanks

Hi SQLDBA321,
As your post, SQL Server 2012 or higher version has removed that requirement of virtual local area network (VLAN). For more details, please review this similar blog:
What you need for a Multi Subnet Configuration for AlwaysOn FCI in SQL Server 2012.
And you can perform the steps in the following similar blog to set up an AlwaysOn Availability Group with multiple subnets.
http://www.patrickkeisler.com/2013/07/setup-availability-group-with-multiple.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

I have couple of VMs Server 2012 R2 RTM on Hyper-v Host running the same OS.
All machines including host and VM that is not in domain have an error in Windowsupdate.log:
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
FW and UAC are off on all. There are posts on web discussing the same error but most of them connect this to WSUS or Config Manager. And it is clear because we are touching Windowsupdate.log when troubleshooting WSUS. And because WSUS on 2012 is BUGGY this
error confuses too.
Finally, as mentioned earlier I deployed NEW server 2012 not from SYSPREP and did not place it to the domain. Updated the machine from MS update. Everything is OK beside the same error about COST :).
So now it is clear it has nothing to do with WSUS or Configuration manager. It indicates to some Network issue. But there is no clear answer. Some suggest just to ignore the error if everything is OK. But I would like to have a clean log. And it is just
interesting what could cause the problem. Is it Hyper-V stuff or Server 2012 itself. Anyway I guess I am doing right by posting a question on HV forum since here are people that should know 2012 .
Thanks.
see the log below
2013-12-16 20:32:03:610 752 b44 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-12-16 20:32:04:047 752 b44 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-12-16 20:32:04:047 752 b44 PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2013-12-16 20:32:04:047 752 b44 Agent Reading cached app categories using lifetime 604800 seconds
2013-12-16 20:32:04:047 752 b44 Agent Read 1 cached app categories
2013-12-16 20:32:05:016 752 b44 PT   + SyncUpdates round trips: 2
2013-12-16 20:32:06:422 752 b44 Agent   * Found 0 updates and 14 categories in search; evaluated appl. rules of 449 out of 701 deployed entities
2013-12-16 20:32:06:422 752 b44 Agent *********
2013-12-16 20:32:06:422 752 b44 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 2]
2013-12-16 20:32:06:422 752 b44 Agent *************
2013-12-16 20:32:06:422 752 b44 IdleTmr WU operation (CSearchCall::Init ID 2, operation # 20) stopped; does use network; is not at background priority
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented PDC RefCount for Network to 0
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented idle timer priority operation counter to 1
2013-12-16 20:32:06:422 752 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU   # 0 updates detected
2013-12-16 20:32:06:422 752 ba0 AU #########
2013-12-16 20:32:06:422 752 ba0 AU ## END ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU #############
2013-12-16 20:32:06:422 752 ba0 AU All AU searches complete.
2013-12-16 20:32:06:422 752 ba0 AU AU setting next detection timeout to 2013-12-17 22:55:28
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hi pob579,
Sorry for the late .
I want to know if your network connection indicates " unidentified network ".
If that is the case , you can try the step below :
    open the "local group policy"
    expand local computer policy -->computer configuration -->windows settings -->security settings
--> network list manager policies
    in the right pane you will see Unidentified Networks , double click it , then you can configure the
Location Type when the network connection is unidentified
    If there is domain , you need to change the same entry in "Domain Policy"
    after that please restart your computer
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to port forward in windows server 2012 ? for IIS

Hi,
I have windows server 2012 in AWS cloud (Public IP)
Installed IIS 8 and running website in the port 8980 and its working fine (Public IP)
My question is
I have CNAME record in Godaddy in the name of example.com which is pointed to my PUBLIC IP ... its working fine.
But I want to know how to port the 80 request to 8980 in windows server 2012 thanks.
Wes

Hi,
According to your description, my understanding is that you want that example.com(in Godaddy) to transfer corresponding queries(port and website name) to the website on WS 2012(in AWS cloud).
Since your domain example.com is supported by Godaddy, I recommend you to contact the supporter of Godaddyand confirm that if their product supports port forwarding.
In general, if you useWindows ServerInstruction, we may enable NAT(Routing and Remote Service) on network interface to redirect services/ports.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am trying to download an update for my iphone, but in the middle of the download I get an error message that says, 'There was a problem downloading the software for iphone. The network connection timed out.' Any ideas on how to resolve this issue?

I am trying to download an update to my iphone, but in the middle of the download, I get an error message that reads, 'There was problem downloading the software for the iphone. The network connection timed out'. Any idea how to reslove this issue?

Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregon

mikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR

Server 2012 SMB3 for redirecting files or VHD

Hello,
I’m new to Server 2012 and my question is, should I use Server 2012 SMB3 shares for redirecting files and folders or should I create a virtual HD, put the VHD in the shared folder and do file and folder redirection to the VHD? Is there a preference to use
shares folder or VHD in a shared folder on ? I’m obtaining my information from, Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx#BKMK_Step4 under Step 3.
Any insight would be appreciated.
Thanks, Rick

Hello,
I’m new to Server 2012 and my question is, should I use Server 2012 SMB3 shares for redirecting files and folders or should I create a virtual HD, put the VHD in the shared folder and do file and folder redirection to the VHD? Is there a preference to use
shares folder or VHD in a shared folder on ? I’m obtaining my information from, Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx#BKMK_Step4 under Step 3.
Any insight would be appreciated.
Thanks, Rick
It's not clear what you want to do really. If you want to run VMs on the same machine then hosting them in a loopback on SMB 3.0 folder is not supported configuration. See:
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
"Loopback configurations (where the computer that is running Hyper-V is used as the file server for virtual
machine storage) are not supported."
Avoid
loopback configurations for Hyper-V over SMB
http://blogs.technet.com/b/josebda/archive/2012/11/14/windows-server-2012-file-server-tip-avoid-loopback-configurations-for-hyper-v-over-smb.aspx
If hypervisor and actual file server are different hosts then you'll be fine.
If you want to run VMs locally on the same host then again using "nested" VHD(x) is by far the best idea.
Did it put a bit more light on the issue? :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Server 2012 errors for timeout -- LDAP error number: 55 -- LDAP error string: Timeout Failed to get server error string from LDAP connection

Similar Messages

Maybe you are looking for