Server 2012 R2 Core installation & Remoting from another computer

I have server 2012 R2 Standard Core install in server. I want to move that server to data center . now i want to create virtual machines remotly from my office. is this possible. i have tried enabling remote management but its gives below error.
Akshay Pate

By default, a Server Core installation allows remote management. However, the default configuration is based on Active Directory domain membership and a single subnet. This leaves you with two challenges:
In a non-domain environment, your credentials might not match the credentials used, locally, on the Server Core installation. This is an easy one to fix, by either making sure the password for both the 'Administrator' accounts are set to match, or
by creating a secondary account with administrative privileges on the Server Core installation using option 3 in
sconfig.
The Hyper-V Manager requires specific network traffic and permissions. John Howard, a Program Manager on the Hyper-V team has created a free script called
hvremote.wsf, that helps you address issues you might have and find specific connection problems.

Similar Messages

Re:iMac remotely accessed from another computer and location?

Can you access an iMac remotely from another computer and location if there is knowone to switch it on?

Barbara,
Both are legitimate concerns, I'll address each as best I can.
As for the the power issue, well that's going to be the case with any computer. We have many choices, most of them impractical for example take your house off the grid, put in your own power source (solar or wind powered) which clearly for most of us is totally impractical. The next thing would be a backup-generator like a hospital or other mission critical facilities (police & fire houses) have. While this is more practical again it's stretching the limits again for most of us. So the next thing is a healthy battery back up system that can maintain power to a computer for several hours if necessary. While they are still expensive they are far less expensive than the first two solutions. Of course you can set the energy saver settings to power on your computer after the power comes back on if even the UPS battery goes dead. I haven't tried this remotely however I think it might work.
Next is security, DropBox and Logmein both address this themselves so I would recommend looking into their solutions. Personally I find them trust worthy and don't have an issue. Even if you use MobileMe you would still have the same concerns, and how about Google, and all the other major players. To me Google while it's a vast resource and extremely helpful if for some reason they decided to become the Evil Empire they have far more access to your information that anything. Anytime you do a simple search they are collecting information about you. For example let's say you are looking for ATM's in a new city, they can capture your search and if they were evil enough they could track your every step. Is this far fetched and ridiculous, of course it is but it is possible. However this is the case with any Internet based computing, if you use some basic common sense for the most part your data is pretty secure. I'm much more nervous about the minimum wage clerk at Taco Bell taking my credit card information than Google, Apple, Logmein or Dropbox doing so.

Still cannot install the agent on Server 2012 R2 Core

Hi
I'm using the latest build of the agent (that I could find - 2.0.8692).
This KB http://support2.microsoft.com/kb/2997692/en-us says that 2.0.8689 and above should be supported on Windows Server 2012 R2 Core.
The installation works, but when I'm about to do the postsetup (Register Server Wizard) I get an unhandeld exception and cannot continue.
The error reads:
Creating an instance of the COM Component with CLSID {DC1C5A9C-E88A-4DDE-A5A1-60F82A20AEF7} from the IClassFactory failed due to the following error: 80040111 ClassFactory cannot supply requested class (Exception from HRESULT: 0x80040111 (CLASS_E_CLASSNOTAVAILABLE))

I am getting the same error, Hyper-V Server 2012R2
Full error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Runtime.InteropServices.COMException (0x80040111): Creating an instance of the COM component with CLSID {DC1C5A9C-E88A-4DDE-A5A1-60F82A20AEF7} from the IClassFactory failed due to the following error: 80040111 ClassFactory cannot supply requested class
(Exception from HRESULT: 0x80040111 (CLASS_E_CLASSNOTAVAILABLE)).
   at System.Windows.Forms.OpenFileDialog.CreateVistaDialog()
   at System.Windows.Forms.FileDialog.RunDialogVista(IntPtr hWndOwner)
   at System.Windows.Forms.CommonDialog.ShowDialog(IWin32Window owner)
   at Microsoft.Internal.CloudBackup.UI.Wizards.Activation.VaultCredentialBrowsePage.vaultCredentialBrowseButton_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34014 built by: FX45W81RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
PostSetup
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/PostSetup.exe
TraceWrapper
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/TraceWrapper.DLL
CBEngineServiceProxy
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBEngineServiceProxy.DLL
System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34239 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
CBActivationWizard
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBActivationWizard.DLL
CBWizFx
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBWizFx.DLL
CBClientCommon
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBClientCommon.DLL
System.ServiceModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
CloudUtils
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CloudUtils.DLL
System.ServiceProcess
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceProcess/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
NativeMethods
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/NativeMethods.DLL
SMDiagnostics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.ServiceModel.Internals
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.IdentityModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.IdentityModel/v4.0_4.0.0.0__b77a5c561934e089/System.IdentityModel.dll
CBCommonControls
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBCommonControls.DLL
CBUIErrorHandling
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBUIErrorHandling.DLL
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Configuring Volume Shadow Copies in Windows Server 2012 R2 Core

Hello,
I have a File Server under Windows Server 2012 R2 Core under a Lab Environment, I am trying to configure the Volume Shadow Copy on it, I tried to remote to its Disk Management via Computer Management but couldn't find the configuration for it.
Any Ideas?
For God, and Country.

Hi Sheen Lim,
As far as I know we can use cmdlets to manage the volume shadow copy in server core but can not use the server manager remotely. You can refer the following third party article
to enable the VSS.
Configure Shadow Copies on Server Core
http://blogs.msmvps.com/ad/blog/2008/08/12/configure-shadow-copies-on-server-core/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install first forest and active directory on the windows server 2012 R2 core?

hi to all
i installed a windows server 2012 R2 Core edition on the server platform and i want install first forest and Domain on this server core by cmdlet...but i cannot install it. i search in the technet and other sites and blogs on the internet
and i saw many commands that use for install it such as "DCpromo /unattend" and even
"Install-addsforest" in the powershell but still i cannot get a result from these commands.
i need step-by-step guide that help me for install new forest and domain in the server 2012 R2 core.
thanks a lot friends

C:\PS>Install-ADDSForest
-DomainName mydomain.local -CreateDNSDelegation
-DomainMode Win2012 -ForestMode Win2008R2
-DatabasePath "d:\NTDS"
-SysvolPath "d:\SYSVOL"
-LogPath "e:\Logs"
you can use above example
Darshana Jayathilake

CPU Wait time per dispatch on a Server 2012 R2 Core.

I have a Hyper-V Cluster of 9 Server 2012 R2 core Hosts. I need to measure the CPU wait time, but when I use the remote performance counter a lot of the counters for Hyper-V is missing. How do I monitor this wait time?

Hi Mikroben,
Based on my test , after installing hyper-v role on "Client" then we can see these counters and use it for managing hyper-v server remotely .
Also , please use corresponding "Client" OS to monitor hyper-v server as Brian mentioned .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

Using SQL Server 2012 SSIS to Extract Data From SAP

Hi
What is the current best practice for using SQL Server 2012 SSIS to extract data from SAP R3? Please note we are looking for a solution that does not use SAP BW or SAP OHS.
Ideally we would like to build our ETL SSIS process to make a .NET call to an SAP RFC procedure and avoid using web services.
With SS2012 can we use any of these without using SAP BW:
- SAP .NET Connector
- MS ADO .NET
- BizTalk .NET 3.0 Adapter
Thanks and take care,
Shayne

Hi Shayne,
You can use the .NET Framework Data Provider for mySAP Business Suite along with SQL Server Integration Service (SSIS) to import data from an SAP system into SQL Server database tables, flat files, or other compatible destination types. You can create an SSIS
package that can be executed to import data from an SAP system.
You must use the SQL Server Import and Export wizard to import data into the SQL Server database. You must provide a select query to specify data to be imported. The query must confirm to the semantics supported by the Data Provider for SAP. You can start the
SQL Server Import Export Wizard either from the SQL Server Management Studio or from an Integration Service project in Visual Studio. Detail steps please see:
Importing SAP Data Using SQL Server Management Studio:
http://msdn.microsoft.com/en-us/library/cc185161(v=bts.10).aspx
Importing SAP Data Using Visual Studio:
http://msdn.microsoft.com/en-us/library/cc185254(v=bts.10).aspx
Please feel free to ask if you have any question.
Thanks,
Eileen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Hi, my ipad got stolen and i was wondering if there is anyway of finding out the serial number remotely from another apple device?

Hi, my ipad got stolen and i was wondering if there is anyway of finding out the serial number remotely from another apple device?

If it iwas registered to your account then you should be able to get it from your support profile : https://supportprofile.apple.com/
If not then do you have a backup of the iPad on your computer's iTunes ? If you do then in iTunes go into Edit > Preferences (iTunes > Preferences if using a Mac) and on the Devices tab on that hover your mouse pointer over the iPad's backup : http://support.apple.com/kb/HT4061

Named instance cannot be accessed from another computer after IP address changed

Hello
In our SQL server computer, we are using dynamic IP. There are two instances; one of them is a named instance.
We can access both instances.
However, after changing the SQL server computer to static ip, we cannot access the named instance from another computer (the non-named instance is ok). Any idea what to do to make the named instance accessible? After the ip address changed, I
only did a ipconfig /renew without rebooting the computer, would rebooting solve it?
Since I only have limited amount of time to take the production server offline and since I do not know enough about this, I ask to see if any one has any idea.
Thanks
Carbond

Hello,
Please try to restart SQL Server service instead using SQL Server Configuration Manager.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to open 10g Database Control Webpage from another computer

Unable to open 10g Database Control Webpage from another computer
Hi Gurus
I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control
I can open Database Control Webpage on the database machine by typing
http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
or
http://136.18.70.189:1158/em
But can not open it from another PC
When I do following from another PC
1. http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
Get error: [code=DNS_NO_DATA] The IP address was not found during the DNS lookup. Contact your system administrator.
2. http://136.18.70.189:1158/em
Get error:Can not display web page
I can ping 136.18.70.189 but not USI2374993VND0.vlgdw2k.visteon.com
On the other PC I also tried adding 136.18.70.189 to
tools - internet options - security - local internet - sites - advanced - add this web
site to the zone as http://136.18.70.189
But it did not work
Please help with any ideas
Thanks a bunch
New DBA

Firewalls?
DNS translation issues?

If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?

If I imported a CD into my iTunes library from one computer how can I listen to it from another computer? I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library. I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library). Not sure if this makes semse...help.

jamie171 wrote:
My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library? Is there no way to import songs only once into the library and then access them from all my authorized computers?
Only if you have iTunes Match or of the computers are on the same local network.

How do I stop my Macbook Air from transferring your information from another computer?

Just purchased my Macbook Air. When I started it up, it asked if I wanted to tranfer information from my other computer. the first thing it started to download was the music and it suddenly froze when it had a 1hr and 46 mins left and now I can escape out of it. It is the only thing that is on my screen. I ended the transfer on my PC but it wont clear out on my Macbook Air. Is there a way to restart the computer so it will retry the tranfer without the music?

Welcome to Apple Support Communities
Hold the Power button until the Mac turns off, and turn it on again.
Instead of transferring your files from another computer through the network, copy your data from your old PC or Mac to an external drive, connect the external drive to your MacBook Air and transfer your files

How do i use a Time Machine from another computer from Time Capsule with multibackups

Can Iuse a Time Machine from another computer from Time Capsule with multibackups

Not sure what you are asking here.
Time Machine is software on a Mac that is used to backup that Mac to a Time Capsule hard drive.
Are you asking if another Mac can backup to the same Time Capsule that other Macs are already using?
Or, if not....please clarify on exactly what you want to do.

My ipod touch has a huge collection of music that I don't want to lose or replace but my computer has now crashed beyond recovery. How can I access my itunes account from another computer or transfer my playlists to another computer from my ipod?

My ipod touch has a huge collection of music that I don't want to lose or replace but my computer has now crashed beyond recovery. How can I access my itunes account from another computer or transfer my playlists to another computer from my ipod?

You can transfer iTunes purchases to your "new" computer by
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can transfer other stuff by:
Best iPod to PC
How to transfer or sync files from iPod to PC - Windows mac iPhone iPod software reviews - Software Wiki

Server 2012 R2 Core installation & Remoting from another computer

Similar Messages

Maybe you are looking for