Server 2012 R2 DC and File Server on the same server

alexthefourth wrote:
what i plan on doing is running esxi as the hypervisor and running a vm with server 2012 r2 and another server with windows 7 due to a fax application not being able to run on server editions.
You can still run two Windows 2012R2 Servers on Esxi, just like Gary said.  For 10 users, it's really not that big of a deal either way.

KOOLER (StarWind) wrote:You're breaking up the whole thing! Virtualize both DC and FS and live your long & happy life!https://technet.microsoft.com/de-de/library/virtual_active_directory_domain_controller_virtualizatio...http://community.spiceworks.com/topic/448752-server-2012-r2-virtual-file-server-best-practiceGood luck :)--is it okay to run a domain controller with dhcp, ad, and dns on the same server? this is mostly due to budget concerns for purchasing a second server 2012 license.
1 License covers two V servers doesn't it? +1

Similar Messages

  • SQL 2000 AND SQL 2005 ON THE SAME SERVER

    Hi all ,
    I have an installation of    SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
    I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
    Thank's a lot.
    Antonio Voce.

    Hi,
    yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
    look at following blog
    http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
    also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
    but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005  then install solman 4.0
    regards,
    kaushal

  • Can we run 11g RAC and 12c RAC in the same server?

    There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
    Current setup:
    HP-unix 3 node RAC on 11g R2
    4CPU
    64 GB RAM
    3 TB SAN storage
    no ASM
    Upgrade setup:
    HP-unix 3 node RAC on 12C RAC
    8CPU
    128 GB RAM
    6+ TB SAN storage
    ASM
    We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
    Thank you for your time!

    Hi,
    The following table shows you the compatibility between various versions:
    Clusterware
    ASM
    DB
    Certified
    12.1
    12.1
    12.1
    Y
    12.1
    12.1
    11.2(a)
    Y
    12.1
    12.1
    11.1(a)
    Y
    12.1
    12.1
    10.2(a)
    Y
    11.2
    11.2(b)
    11.2
    Y
    11.2
    11.2(b)
    11.1
    Y
    11.2
    11.2(b)
    10.2
    Y
    11.1
    11.1
    11.1(c)
    Y
    11.1
    11.1
    10.2
    Y
    11.1
    11.1
    10.1
    Y
    11.1
    10.2
    11.1
    Y
    11.1
    10.2
    10.2
    Y
    11.1
    10.2
    10.1
    Y
    11.1
    10.1(d)
    11.1
    Y
    11.1
    10.1(d)
    10.2
    Y
    11.1
    10.1
    10.1
    Y
    10.2
    10.2
    10.2
    Y
    10.2
    10.2
    10.1
    Y
    10.2
    10.1(d)
    10.2
    Y
    10.2
    10.1
    10.1
    Y
    10.1
    10.1
    10.1
    Y
    (a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
    Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

  • FMS 3.5 on Server 2012 R2 and with Wowza on the same server

    Hi there,
    Is it possible to have my old FMS 3.5 on the same server as I have Wowza 3.6 installed?
    The server is windows Server 2012 R2.
    I have installed the FMS, but it does not start up after installation, and the bat-files cannot start/stop the service either. It doesn't make a difference if I go to Services to start them up manually, the sample files still doesn't work.
    Any suggestions?
    Thanks in advance
    HC

    Hi Hans Christian RVN,
    FMS 3.5 is not supported on Win 2012 R2. You may want to give it a spin on the supported platforms listed at https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.
    ~Ashish

  • Problems with Sent mail and multiple accounts on the same server

    I have 2 different email accounts that are on the same server. Regardless of the account from which I send the email, all of the sent messages end up in the same sent folder. Is there a way to force the sent messages to go into their correct Sent folder?

    In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
    Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" to hide your real email address if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
    Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private. Be careful to not alter any suffixes, though.
    Finally, for the two accounts involved in the problem, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

  • SCCM - Branch Distribution point and Management point on the same server

    Hi All,
    Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
    Rgs,

    Hi,
    Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
    I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
    prerequisites needed.
    Can you elaborate on which roles you are considering installing? 
    Steven Hodson | http://www.stevenhodson.com | @_hodders

  • Can I install 9i database  and  9i AS on the same server ?

    Dear Forum,
    We need to install Oracle 9i database(9.2.0.1.0) 64-bits
    and Oracle 9i Application Server (9.0.2.0.1) on the same Server machine with the following features:
    Machine: SunFire 6800, 4 CPU, 8 GB RAM
    OS: Solaris 9 8/03
    Is it possible?
    Will we have problems or conflicts with the ports numbers?
    Please, any aditional comments or recommendations will be welcome!!!!
    Best regards,
    Alfredo

    Hi Alfredo,
    If you are planning to install an infrastructure as part of your application server, you might run into a port conflict for the TNS listener. The easiest way of solving this is to move the non-infrastructure database listener to another port.
    A number of things like these are handled automatically in later releases. You do know that 9.0.2 is old and desupported, right?
    Regards,
    Mathias

  • IBCM internet and intranet management on the same server

    Could anyone help me see what I am missing? We are trying to test setting up IBCM using the same management point as the intranet clients. We have already successfully implemented PKI for intranet clients because we were bringing in a MacBook Air. We have
    an external URL coming through reverse proxy and forwarded to our internal server. I can navigate to
    https://sccmext.domain.com/sms_mp/.sms_aut?MPlist and get 403 access denied I also get that when I am on prem and navigate to the local server
    The CcmMessging.log has errors regarding post to
    https://sccmext.domain.com/ccm_system/request failed with 0x87d00231
    I think this has something to do with certificates... I have a SCCM Web certificate for the internal server hostname and another certificate for the external name coming through the reverse proxy.
     I have the internet FQDN on the site system properties, MP and DP are set to allow internet and intranet based clients...

    Here are some entries before and after that entry above:
    10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
    10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
    10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
    10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
    10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
    10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
    10.7.29.195 CCM_POST /ccm_system/request - 443 - 10.7.29.9 ccmhttp 403 7 5 1466 15
    10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
    10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
    10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
    10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
    These are from the IIS log file .195 is the SCCM site server, 81 and 82 are the reverse proxy servers. Sorry if I am not answering questions accurately, this is getting into parts of SCCM I am not familiar with at all.

  • Need urgent on installation of Spatial and R12 data in the same server

    Hi
    This is Hanumantha. I am getting problem with Geo Spatial data type objects manuplating from Apps.
    Geo spatial data is installed in Navteq database in one server. R12 application is installed in another server. Through data base link in APPS, I am able to access Navteq tables data, procedures etc. But I can't manuplate the objects data like Varrays and object types from apps throgh db link from navteq.
    Instead created the procedure which will decompose the object type to "primitive types" (number, date, varchar2,.) which is accessing from apps. But hz_locations , Geometry column will have data type SDO_GEOMETRY and I cant update with primitive data type (number, date, varchar2..).
    Kindly please help us reconstucting to the SDO_GEOMETRY object using primitive data types.
    OR
    Is there any possiblity of installing Navteq database(GeoSpatial data) and R12 applications data together in the one server.
    Could please any help on the above as soon as possible?
    Thanks in Advance.
    Thanks,
    Hanumantha

    Could you give me an example of this update rutine?

  • Internet Sales ISA (R/3 Edition) and SAP EP on the same server ?

    We already have an SAP Portal (SAP EP) in place and we are planning to do a pilot deployment of the E-Selling R/3 Edition: is it technicaly possible to deploy then on the same SAP WAS server / cluster ?
    If yes, what would be the limitation or reason motivating not to do it.
    Thank you

    Thank you for your answer!
    How did you solve the SSO more specifically? You created an URL iView from scratch and assigned it to a specific system? Did you also to maintain any parameters or how did you get pass the login screen? Does that work automatically?
    Furthermore, did you use the link ".../b2b/b2b/init.do" as URL or some other? Because I once saw one ending differently...
    Kind regards,
    Christine

  • Generate report to the screen and file (pdf) at the same time

    Hello guys,
    I am trying to distribute a report at the same time to the screen and the file. I cannot get it to work. In the help file it says that I could specify destinations in the 'Distribution Dialog'. When I enter there two destinations the report does not run even to one of them. If I enter one destination it would run perfectly. The other option is to create .dst file. I created it. Where should I specify the file location? Is it a desname?
    Any help would be appreciated,
    Thanks,
    Sonya

    Distribution is a batch process. You can't combine distributing a report to file/printer/email/etc. and running to screen.
    Each entry in the distribution dialog will be executed the same as the entry in the .dst file.
    If you want to run with a .dst file then you'll need a command line argument like:
    rwrun60 <normal command line args> distribute=yes destination=<filename.dst>

  • BI 7.0 and ECC 6.0 in the same server

    Dear experts,
    In my company the scenarion is like, we have installed ECC 6.0 in server where development work is going on.
    Now we have requirement to implement the BI 7.0 in the same server as already BI content is existing in the same server.
    My question is
    Is it possible to implement the BI on the same server?
    If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
    If No, then what is the use of the BI contents in the ECC 6.0 server?
    Regards,
    SUD

    Hi
    > it possible to implement the BI on the same server?
    Yes, why not? But that will be a separate SAP installation with different SID.
    >If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
    Yes, that is possible. Both the system will be having different Logical system name. You have to create a source system connection from ur BI to ECC system and then data extraction is possible.
    >If No, then what is the use of the BI contents in the ECC 6.0 server?
    BI Content in ECC is there to facilitate data extraction from ECC to BI. It would provide you the structure of data extraction. Presence of BI Cont does not mean a ECC system will be working as BI system.
    Hope this clarifies your doubt.
    Regards
    Anindya Bose

  • Server cleanup wizard problem - unable to connect to the WSUS Server Database.

    I'm trying to run server cleanup wizard.. it starts to run and then after a while it gives me this error:
    The WSUS administration console was unable to connect to the WSUS Server Database.
    Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
    System.Data.SqlClient.SqlException -- Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    The statement has been terminated.
    Source
    .Net SqlClient Data Provider
    Stack Trace:
       at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.InitializeDerivedProperties()
       at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.get_NewUpdatesCount()
       at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetSyncInfoRow(WsusSynchronizationInfo syncInfo)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetListRows()
    Thanks

     Some questions:
    Are there any other databases running on this Std Edition SQL service?
    [a] Yes there are, we have Kaspersky enterprise DB, Report Server DB and local application DB.
    Are there any other services running on this WSUS Server?
    [b] Yes there are, we have Active Directory, Kaspersky enterprise, SQL Server 2005, and WSUS all on the same server.
    How many days since your WSUS server was first installed?
    [c] It's been about a year now.
    What is the physical size of the SUSDB.mdf file?
    [d] 9,666,752 KB
    What is the hardware configuration of this machine, including disk drives?
    [e] Intel Xeon 1.86, 2GB Ram, HD C: 39GB - E: 25.2, running Windows Server 2003 R2 SP2.
    How many client systems are you servicing from this WSUS Server?
    [f] Around 40.
    What products/classifications are you synchronizing.
    [g] Windows XP-vista, Windows Server 2003, Office 2003-2007, SQL Server 2005.
    Okay, for starters, you have an underpowered/overextended machine running Active Directory, ASP.NET, and a database server, all on a sub 2GHz CPU with 2GB RAM, and not enough disk spindles. The machine has had WSUS running for about a year and is 9GB in size.
    There's no doubt in my mind that some of your performance issues are directly related to disk and database fragmentation.
    There's also no doubt that some of your performance issues are directly related to memory starvation.
    I'd suggest the following long-term fixes:
    1. Get a second machine. Make it a dedicated database server. Provision it accordingly to support servicing multiple database applications.
    2. Lacking #1, this machine needs more memory. It also needs more disk spindles. At a minimum the databases being serviced should be on a dedicated physical drive; ideally there would be two dedicated drives allocated for supporting database services. The
    For the short-term fixes, do this:
    1. During after-hours time, if you don't already have one, build a temporary machine that can act as a DC/GC, while you take this machine temporarily offline.
    1. Shutdown the Update Services service, SQL Server database engine, and any other services dependent on the SQL Server database engine (Kapersky, and other reporting applications). Disconnect from the network to temporarly eliminate DC traffic. (You could also shutdown the AD services, but disconnecting the network cable is ever-so-much easier.) Defragment ALL drives.
    2. Restart ONLY the SQL Server service. Obtain this SQL script to Reindex the WSUS Databases.
    3. Restart ONLY the Update Services service. Attempt the Server Cleanup Wizard again. Run it in two passes. Pass 1 performing everything except  remove unused updates. Pass 2 running only remove unused updates.
    4. After completion of the Server Cleanup Wizard, reconnect the machine to the network and resume all other services.
    5. If you're able to complete #3, secure the services of a well-qualified DBA to determine if there are any misconfigurations in your SQL Server setup that would account for why your WSUS database is 9GB in size -- such as improperly configured autogrowth parameters. Based on the products you're updating and only forty clients, 9GB is about 3x the maximum size I would expect to see in a WSUS database. It's possible this is simply caused by excess unused updates, it's possible it's caused by fragmentation, it's probable it was caused by unnecessary autogrowth of the database due to insufficient update maintenance. You'll want a DBA to assist you in shrinking that database after you successfully run the Database Maintenance and Server Cleanup Wizard.
    Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
    Principal/CTO, Onsite Technology Solutions, Houston, Texas
    Microsoft MVP - Software Distribution (2005-2009)

  • Crystal Report 8.5 and 9 installed on the same box

    Is it possible to have Crystal Report 8 and 9 installed on the same server?

    Hi Michael,
    You can install Crystal Report 8.5 and 9 on same box.
    However, there are chances that dll may conflict and few issues may occur.
    Try to install on different harddrives.
    Regards,
    Shweta

  • SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)

    I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
    but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages. 
    My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look? 
    (Summary)
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2061893606
      Start time:                    2014-05-28 17:12:12
      End time:                      2014-05-28 17:19:47
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  WIN-1V3VKPV5Q19
      Machine processor count:       1
      OS version:                    Future Windows Version
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      Installation location:         E:\x64\setup\
      Installation edition:          Evaluation
      Slipstream:                    True
      SP Level                       1
      Patch Level:                   11.1.3128.0
    Product Update Status:
      Success: KB 2674319, KB 2793634
    Product Updates Selected for Installation:
      Title:                         Service Pack 1
      Knowledge Based Article:       KB 2674319
      Version:                       11.1.3000.0
      Architecture:                  x64
      Language:                      1033
      Title:                         SQL Server 2012 SP1 GDR Product Update
      Knowledge Based Article:       KB 2793634
      Version:                       11.1.3128.0
      Architecture:                  x64
      Language:                      All
      Update Source:                 MU
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLAgent$TESTDB
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Automatic
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SQLENGINE
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  true
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    TESTDB
      INSTANCENAME:                  TESTDB
      ISSVCACCOUNT:                  NT AUTHORITY\Network Service
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQL$TESTDB
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           WIN-1V3VKPV5Q19\Administrator
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    1
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
    (Error Log)
    2014-05-28 17:17:26.64 spid8s      0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2014-05-28 17:17:26.73 spid9s      Starting up database 'model'.
    2014-05-28 17:17:28.24 spid9s      Error: 9004, Severity: 23, State: 6.
    2014-05-28 17:17:28.24 spid9s      An error occurred while processing the log for database 'model'.  If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
    2014-05-28 17:17:28.24 spid9s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    (Details)
    (01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
    (01) 2014-05-28 17:17:28 Slp:     Message: 
    (01) 2014-05-28 17:17:28 Slp:         Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
    (01) 2014-05-28 17:17:28 Slp:     HResult : 0x851a001a
    (01) 2014-05-28 17:17:28 Slp:         FacilityCode : 1306 (51a)
    (01) 2014-05-28 17:17:28 Slp:         ErrorCode : 26 (001a)
    (01) 2014-05-28 17:17:28 Slp:     Data: 
    (01) 2014-05-28 17:17:28 Slp:       SQL.Setup.FailureCategory = ConfigurationFailure
    (01) 2014-05-28 17:17:28 Slp:       WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
    (01) 2014-05-28 17:17:28 Slp:       WatsonExceptionFeatureIdsActionData = System.String[]
    (01) 2014-05-28 17:17:28 Slp:     Stack: 
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
    (01) 2014-05-28 17:17:28 Slp: Watson Bucket 1 
     Original Parameter Values 
    (01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@ 
    (01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart 
    (01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart 
    (01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc 
    (01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST 
    (01) 2014-05-28 17:17:28 Slp: 
     Final Parameter Values 
    (01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@ 
    (01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2 
    (01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2 
    (01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc 
    (01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6 

    Hi Nababoya:
    As you are telling this is a test installation process...
    In the logs i m seeing the error message "An error occurred while processing the log for database 'model'.  If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
    1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
        1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
    http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
        1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
    http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
    2) As if this is a new installation try to repair the instance with the help of setup media file
    3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
    4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
    Hope this helps and let me know any questions...
    Thanks,
    Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :)

Maybe you are looking for