Server 2012 R2 Drivers

Hi all,
I have installed Server 2012 R2 in my laptop in another driver(where I have windows 8.1 as primary OS).
But I don't see wi-fi drivers do exist in or can available in internet when I was doing Windows Update.
Can any one please help me to get Wi-Fi drivers for this.
Thanks !

You need to first check which model of wifi adapter is installed on your system, then go to the manufacturer's site and download the drivers.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

HP Officejet Pro 6830 Scanner drivers for Server 2012

Printer: HP Officejet Pro 6830 e-All-in-One Printer
Serial Number: [edited Serial Number by Moderator]
Product Number: E3E02A
Email Address: [edited email by moderator]
Operating System: Windows Server 2012
I have an issue when trying to install the printer and scanner driver on Server 2012. The driver on the website for Server 2012 is 32Bit link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4138&lc=en&cc=za&dlc=en&sw_lang=&product=5390...
And the drivers that came with the printer give the following error: "This computer does not meet the following system requirement(s): The Operating System of this computer is not supported."
Have phoned HP on the support line all they do is give me a different phone number to phone.
Please someone help.

Hi @Mark-active
Although my area of expertise is with consumer products and software, not commerical products such as servers, I do have something that might be helpful; Setting Up the Printer on Windows Server 2003, 2008, or 2012 for HP Officejet Printers.
If the issue you are experiencing persists, I suggest giving us a call. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Display Drivers for intel (R) G45 express chipset on windows 8(multipoint server 2012) 64 bit

HI
I recently bought windows multipoint server 2012 from Microsoft which comes with windows 8. I am having trouble with installing display drivers from my computer's manufacturer. The display device is Intel (R) G45 express chipset. Intel only supports
windows 7 and when I try to troubleshoot it's compatibility, the driver still does not work. I get an error notifying me that my computer does not meet the minimum requirements. My computer system is 64 bit and the drivers I download are meant
for 64 bit systems, I am currently using Microsoft basic display adapter and when I try to automatically update the driver it says that the drivers are up to date
why do I get the error that my computer does not meet the minimum requirements?
and what can I do to get the drivers working on windows 8?
PLEASE HELP
THANK YOU IN ADVANCE

I had the most up-to-date Intel driver installed, as far as Windows can determine (right click Intel display adapter -> update drivers, search automatically). I was also using that exact download you linked me to.
I also tried switching my graphics card to dedicated discrete mode in BIOS, which made my device ID change, but it too was not supported. I have since managed to reinstall the old drivers from 2010.
Is there some place I can go to download a more recent version of the Intel drivers than Windows can find automatically?

Can't add drivers to Server 2012 R2 boot image in WDS

Hi all.
I want to use my "old" Windows Server 2012 (not R2), WDS to deploy new R2 servers but i can't add driver package to the R2 boot image, it comes out with error code: 0xc0000135 no matter what drivers i use.
Without network drivers i can't boot the image on my physical servers, i've tried on a virtual machine where it works just fine.
I can't use the old boot image to install R2, then it comes with error: "Windows could not apply unattend settings during pass [offlineServicing]." when it tries to install it on both virtual and physical servers.
My initial thought is that the WDS server has to be on a R2 server but i can't find anything that proofs that.
Can someone confirm that non R2 WDS is not supported to R2 or does anyone have an idea to a solution?
Thank you in advance.

Okay maybe not a solution but i installed a new WDS server on R2 and then there was no problem adding driver package to to boot image.
So i was able to confirm my theory that it's not supported to deploy R2 from a non-R2 WDS server. If anyone can make it work please let me know but until then i think this is the only way.
If I understand your description of the issue, the problem is that you are trying to update a WinPE 5.0 WIM with a version of the ADK that services WinPE 4.0 images. Installing the new Windows Server 2012 R2 server caused SCCM to use the version of the
ADK that services WinPE 5.0 images. You should be able to deploy them fine from the other server, but you can only service them from the new one. You will not be able to service the older WinPE 4.0 images from the new server either.

I cannot seem to find the Version 3 print drivers to make XP work from my server 2012 r2 environment. I read that the v3 should fix the XP errors I continue to get, but WHERE do i dowlnoad these? Cant find them anywhere.

Does anyone know where to find V3 drivers rather than v4. I'm having issues with XP working in my server 2012 environment.
Thanks in advance!

the vendor provided version-3 compatible print driver should be used for the device. Check Windows Update and the device manufacturer for a v3 driver.
Best,
Howtodo

Vvideo Drivers for RD430 windows server 2012

We have tried to download the drivers for video in our RD430 windws server 2012 however , we do no find any .
Am I looking at the wrong support center? would you mind helping us ?
Thanks

Good day and welcome to the community.
If you go to the RD430 Driver Matrix, are the drivers you seek available?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Printer drivers, server 2012 R2

I believe that is because you are using V4 drivers.
Does it not work correctly?

We just migrated to 2012 R2 this weekend. I setup printers on the server with correct drivers. However, when I install them on a workstation I am getting the "microsoft enhanced point and print driver" instead of the PCL 6 driver I installed??
This topic first appeared in the Spiceworks Community

DVD drive not recognised after initial install of software and drivers - Server 2012 R2

Hi
I have a SATA DVDRW drive that isnt being recognised by windows server
It is recognised in bios, and was initially recognised by windows, until installing an AV on the server.
Looking under device manager, it can still be seen, but only as a hidden device (greyed out).
Both the C: drive and the DVD drive are set in IDE mode in the bios (believe that is just meaning they are sandalone, rather than RAID mode)
If the DVD drive is moved to another SATA port it is recognised by windows, however I want to keep these ports free, so i can use them to RAID my other HDDs as and when i get round to buying them.
System specs:
OS - Windows Server 2012 R2 with updates (Microsoft Dreamspark)
MB - ASUS M5A78L/M - USB3
RAM - 1x 4GB DDR3
DVD drive - SAMSUNG superwritemaster SH223L
Any help would be good :)
soz if this is in the wrong forum, just point me to the right one
Thanks
J
Hi guys - thanks for the responses.....
we just tried something simple - swapping the OS drive and the DVD drive over (DVD was in sata 5, OS in sata 6 - now the other way round)
This seems to have worked, so we are going to keep it that way round
Seems Silly yet simple
Thanks again

hi, so you say that the drive will work in another SATA port is there the potential that the SATA port you are currently using has a fault? does it work with any other hardware?
another option is a classic windows fault regarding the corrupt registry filters that would make a CD\DVD drive disappear in explorer, however i am not sure if this problem afflicts sever 2012. you could give it a go to see if it resolves the issue
Press the Windows logo key + R to open the Run dialog box.
Type regedit in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type
the password, or click Allow
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters
registry entry. To do this, go to step 7.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, go to the next resolution.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

Windows 8 and Server 2012. Not detecting network is a domain.

Hi Guys,
I hope I have posted this to the correct forum.
I have 2 x Windows 8 PCs that do not detect that they are connected to a domain (network location awareness not working). I can join them to the domain but they still don't recognise the network as a domain. Instead they identify it as "private".
Other PCs on the network (Win XP and Win 7) work prefectly, just the windows 8 machines don't work.
Also, when I do join them to domain I also receive this message.
"changing the Primary Domain DNS name of this computer to "" failed. The name will remain xxxx.local. The error was: the specified domain either does not exist or could not be contacted. "
I have tried the following
- DHCP and DNS has being tried both as static and dynamic (can ping DNS server which is the domain controller Windows Server 2012) .
- Updated PC NIC drivers.
- No AV is installed on either server or PC.
- Updated PC to windows 8.1.
- Disabled both server and PC firewalls.
- Check NLA service and all dependent services are running.
- Disabled all adapters on server except for one.
I am really hoping someone can help with this as I would really appreciate it.
Thanks.
Shaun

Hi Guys,
I managed to find a solution to the problem. I noticed that the DNS server zones did not look quite right. The _msdcs zone was missing the subfolders (dc, domains, gc, pdc).
To fix this issue: on the NIC adapter I had to tick the box "register this connection's addresses in DNS" (found under TCP/IP v4 > advanced > DNS tab).
I then had to remove the DNS role, reboot then re-add the role. Problem solved. Hopefully this saves someone else pulling their hair out for an entire day.

Windows Server 2012 R2 print issues

We are using terminal server with Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0. We are using network printers.
There is problem with printing from Adobe Reader. We are using Adobe Reader 11.0.06. Sometimes users cannot print from Adobe Reader with error message "Printer not found" even though we can print on same printer from other software. This problem can be solved by relogging user, but in our enterprise environment, this is not acceptable solution.
Thanks for your help.

I had the same issue with another Canon UFRII that was not on the network. Canon has some monitor software that attempts to query the device and this threw back Invalid Parameter when the device did not exist. Is your device on the network?
Failed for get value IrregularPaper for printer . Error code 87(ERROR_INVALID_PARAMETER)
     InternalGetPrinterDataFromPort
3328
4984       0
0
LOCALSPL_TRACE
Failed for get value udpEnable for printer . Error code 87(ERROR_INVALID_PARAMETER)
Can you use one of the UFR drivers Canon included with the operating system?
Canon UFR II Color Class Driver
Canon UFR II B/W Class Driver
Alan Morris Windows Printing Team

HP LaserJet Pro 200: Scanning to Network Folder on windows server 2012 - can't find folder

I have searched everywhere and tried every suggested solution with no luck. Hence this post.
I have an HP Laserjet Pro 200 on our small company network (domain). We use windows server 2012 as our domain controller and as our file and print server.
There is a shared folder on the windows server that is shared read/write with everyone on the domain.
I can access the shared folder from any computer on our network.
However, when trying to setup the scan to network folder capability, the HP web interface always comes back that it can't find the network folder.
I have tested that it will work on our network if I want to scan to a shared folder on any of the other computers on our network (other than the main server).
So it appears to be some sort of security / firewall issue with our server, perhaps ?
Does anyone have any suggestions on how to troubleshoot this issue? Is there any technical documentation on how a server environment needs to be changed to allow this to work ? (BTW, this used to work, about a week ago and nothing changed except for installing the latest HP laserjet drivers on the windows server.
Thanks for any suggestions.
Todd

I have searched everywhere and tried every suggested solution with no luck. Hence this post.
I have an HP Laserjet Pro 200 on our small company network (domain). We use windows server 2012 as our domain controller and as our file and print server.
There is a shared folder on the windows server that is shared read/write with everyone on the domain.
I can access the shared folder from any computer on our network.
However, when trying to setup the scan to network folder capability, the HP web interface always comes back that it can't find the network folder.
I have tested that it will work on our network if I want to scan to a shared folder on any of the other computers on our network (other than the main server).
So it appears to be some sort of security / firewall issue with our server, perhaps ?
Does anyone have any suggestions on how to troubleshoot this issue? Is there any technical documentation on how a server environment needs to be changed to allow this to work ? (BTW, this used to work, about a week ago and nothing changed except for installing the latest HP laserjet drivers on the windows server.
Thanks for any suggestions.
Todd

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

Windows Server 2012 Hyper-V network latencies

Hi All,
I have an issue with our Windows Server 2012 Hyper-V hosts that I can't seem to figure out. Situation:
2 x Dell PowerEdge R815 servers with AMD opteron 6376 16 core CPU's and 128 GB RAM running Windows Server 2012 with Hyper-V.
2 virtual machines running on the same physical host and connected to the same virtual switch show high TCP connection latencies. One virtual machines runs a SQL Server 2012 database instance and a Dynamics AX 2012 R2 instance. The other machine a
SharePoint 2013 instance and the AX client. We see latencies of 20ms and higher on most of the TCP connections that are made from the sharepoint machine to the sql server machine.
At first I thought it might have something to do with the physical NIC's. It turned out that VMQ wasn't correctly supported by the firmware of the Broadcom BCM5709c cards. By default this setting is enabled. Turning off the VMQ setting somewhat improved
the situation but the latencies are still at 8ms and higher.
What I don't understand is what influence enabling/disabling VMQ should have on network performance. As I understand it now virtual machines connected to the same virtual switch bypass the physical altogether. Another point is that VMQ should actually improve
performance, not decrease it.
Another question I have is about the various tcp offloading settings on the physical NIC's. After installing the new firmware and drivers from Dell most of these settings are set to disabled. The documents I have been able to find talk about Windows Server
2008, any thought how these settings relate to Windows Server 2012 and whether they should be enabled?
Thanks in advance for your time and thoughts
Kind regards,
Dennes Schuitema

Hi Denes,
Please try to update your BroadCom NIC driver version ,the newest version should be 7.8.51
For details please refer to following link :
http://www.broadcom.com/support/ethernet_nic/netxtremeii.php
Best Regards
Elton Ji
If it is not the answer , you can unmark it to continue .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Intermittent loss of UNC path access on Windows Server 2012

Hi All,
I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the only way we have
found to resolve this is to reboot. When the issue happens, we can't even log into the server as it sits at 'applying user settings' - presumably as it is failing to access the netlogon share on our DCs. If we have an active RDP session when the issue occurs,
we can connect. In this instance we see that if you enter a UNC path in Windows explorer and hit enter, nothing happens - no error messages or anything. The only way I can get any response is when trying to access the IPC$ share on another server, which gives
the following response:
\\server\ipc$ is not accessible. You might not have permission to use this resource, Contact the administrator of this server to find out if you have access permissions.
The parameter is incorrect.
Everything looks right from a physical network perspective, as we can ping from the affected servers and DNS queries are working fine. I can even run net view from powershell and see the local servers and shares on these, however any attempt to access shares
just hangs the powershell session.
If I look in the SMBClient event logs, I can see entries like the following:
Event ID 30805
The client lost its session to the server.
Error: The transport connection is now disconnected.
This is made worse by the fact that when this issue happens, we can't even cleanly reboot the server (it just hangs) and have to perform a cold boot.
The firewall has been turned off and we have taken off our antivirus software to eliminate it as a possible cause. We have even rebuilt one of these servers on a clean install of 2012 R2, but the issue re-appeared. We have also tried using different NIC
drivers (Broadcom NICs installed) to no avail. We have also tried disabling IPv6.
We have logged a ticket with Microsoft support, who have come back telling us that this could be related to a known bug with DFS in 2012 for which a fix is being tested prior to release in a few weeks. However, I can't sit around on my hands until then on
the off chance that this fix will resolve our problem. These servers are hosting our production Lync 2013 front end service and when this issue occurs it breaks the address book search and response group services, so this issue is of critical importance for
us to get resolved asap.
Any help on this would be greatly appreciated.

Hi,
That's right, if you hit enter absolutely nothing happens, no error messages. It makes no difference if I try name or IP address - even trying \\localhost doesn't work. A few minutes later after trying, an entry appears in the SMBClient event logs as mentioned
in my original post. To me it looks like something deep within the networking operations of the OS is randomly breaking. Also, if I try to browse the network from Windows explorer, it just hangs. When I try to restart the workstation service, it just gets
permanently stuck in a stopping state and the server has to be cold booted. Once it boots up, everything is working fine again....until the next time. There is absolutely nothing appearing in the application or system event logs indicating the root cause.
I've checked and DNS resolution is working OK and I can telnet to other hosts on all the required ports.
I had originally thought it might be related to the Broadcom NICs as we've had issues with them in the past, but we switched over to use the 2012 inbox driver for them and the same issue happens. I should also mention that one server is a blade and the other
a rackmount box. Dell support have run full diagnostics on both and have come up clean, so it doesn't appear to be a hardware issue. The even more baffling thing is that we have a third server with identical spec and config that does not have the problem.
The only difference with this third server is that it is not part of a Lync pool pairing using DFS and sits in a remote location on a different LAN.
I had thought of trying to drop back to use SMB1 by disabling SMB2 and 3, but I'm not sure if this would adversely affect any other services.
This one really has me stumped.

Storport.sys BSOD on Windows Server 2012 R2

I recently purchased a Server that houses 45 4TB drives to use as my backup to disk solution. I installed Windows Server 2012 R2 Standard so that I could take advantage of Microsoft's Storage Spaces. I have configured the Storage Pool
with Dual Parity with 3 hot spares. I have also updated every thing to the most current firmware, drivers and Windows Updates that I could find but I am still getting the BSOD. I am using Symantec Backup Exec 2010 R3 to backup my file server to this server.
It will run for anywhere between 12 to 31 hours transferring 1.5 to 3TB and then my server will Blue Screen and every time it Blue Screens it says it is caused by the storport.sys Driver. I've found articles talking about the storport.sys driver causing nonpaged
pool leaks but that was for Windows Server 2008 R2, I can't find anything for Windows Server 2012 R2. If you need additional information just let me know and I will provide it. Any help you can give would be greatly appreciated.

Hi,
This article provided the limitation of Storage Pool in Windows Server 2012 R2:
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#What_are_the_recommended_configuration_limits
Yor current situation is still in supported configuration.
Also there is no hotfix for Windows Server 2012 R2 regarding storport.sys yet. Which means your current issue is not a known issue.
For further troubleshooting purpose you may need to collect dump files for analysis. However it will take a long time to do the troubleshooting process on forum. Thus it is recommended to submit a ticket to Microsoft online support for a professional troubleshooting.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you have any feedback on our support, please send to [email protected]

Server 2012 R2 Drivers

Similar Messages

Maybe you are looking for