Server 2012 R2 Essentials stuck in Automatic repair loop on every reboot

We are running Windows Server 2012 R2 Essentials on a brand new Dell PowerEdge T110. Nothing new has been installed or are we running any special software. This server is a doing DHCP, Domain Controller and DNS. It is also intergrating the Office365.
I am assuming a windows update did this but i cannot pinpoint when exactly this happened and which update since it was a couple months ago. But everytime we try to reboot this server it goes to that Windows 2012 repair screen and asks us if we want to troubleshoot.
I am able to break this loop by going into safe more and then rebooting but this doesnt fix it, it only allows us to then boot windows normally once after that. But this can only be done when we are onsite and not remotely so we havent rebooted this server
or ran new windows updates in quite some time.
Any help or input would be appreciated.
Thank You

Hi,
On current situation, please use Bootrec.exe to troubleshoot this issue. for more details, please refer to
the following KB.
Use Bootrec.exe in the Windows RE to troubleshoot startup
issues
Meanwhile, please refer to the following similar thread and check if can help you.
Windows
Server 2012 essentials stuck in automatic repair loop
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Yoga 2 Pro Windows 8.1 stuck in automatic repair loop

So my Yoga 2 Pro is stuck in the (in)famous Windows 8 Automatic Repair Loop, and I'm not sue how to fix it now. I unfortunately neglected to create a Recovery USB stick, so what are my options without it?
I've already tried booting the computer with the Novo button and choosing System Recovery, but at that point the system goes right back into the Automatic Repair loop. I'd strongly prefer to back up my data before resintalling Windows if that's an option--is it possible to stick the SSD into another computer to do so?
Also, would a USB recovery disc created by someone else with a Y2P be useable on my system? I don't need the full partition image since the one already on mine should suffice. I'm also unsure of my system's Windows 8 Product Key, where can I get that if/when I do need to reinstall Windows?
Thanks for any help, it's greatly appreciated.

First and foremost, good luck:
Method 1:
Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
Click the 'Advanced Options' button
Open cmd and type:
bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD
and also
chkdsk /r c:
chkdsk /r d:
Method 2:
https://www.youtube.com/watch?v=iNKEsOF7e4M
Method 3 (copied from a youtube comment):
1. Turn on the computer.
2. Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
3. Click the 'Advanced Options' button
4. Click the 'Troubleshoot' button
5. Click the 'Advanced options' button
6. Click the 'Startup Settings' button
7. Wait for the system to reboot into the 'Startup Settings' menu (is the same menu for safe mode)
8. Select the 'Disable early launch anti-malware protection' option. (Press '8')
9. If this worked for you, you should now boot into windows.
10. Now you can shutdown your system and it should hopefully work first time the next time you start the system.

Lenovo G780 stuck in Automatic Repair Loop after Windows 8 update

My recent Windows 8 update stuck my computer into an infinite automatic repair loop which results in a blue screen amd the process repeats itself. I tried the OneKey restore feature and the system recovery feature just hangs then it goes back to the same loop issue with rebooting. I called Lenovo for recovery discs since I don't have any any but my concern is does it matter if I mentioned whether I had a 32 or 64 bit OS? I told her to make sure it was for a Windows 8 system amd she just said it works for the G780 models. I'm just hoping these discs work.for a 64 bit system

It should work. Support cannot send you recovery disks if you didn't provide them your serial number. They can check the correct pre-installed OS from your serial number so I'm sure they're sending out the correct disks.

Satellite C850 stuck in automatic repair loop

Hey Everyone,
So I have a issue that really causng me problems.
Many times, my laptop goes to the blue screen of death and restarts.
This time, it randomly said "your PC did not start correctly" shut down and went directly to automatic repair.
Now, Im not able to get it to start properly. It keeps restarting and every time it goes to options such as doing system recovery, start-up repair, start-up setting, restarting etc. it just keeps looping with no way out. The problem is, my laptop is telling me I don't have an administrator account on it so I am unable to do any of the advanced options.
I really need to get my computer to work because I have files on it that I need. recovering those files is my number 1 priority.
Please, help. I would realy appreciate it.
Thanks

Ok so in the first picture
it shows what happens when i click system restore. What its displaying there is, i have no administrator account. So at the bottom it displays "Forgot your password or dont see your account?" I click on that to see if i can find my account, instead it tell me to restart (as you can see in the second picture)
which just loops and brings me back to the beginning.
In the third picture
it shows what happens when i click Command Prompt. What its displaying there is, i have no administrator account. So at the bottom it displays "Forgot your password or dont see your account?" I click on that to see if i can find my account, instead it tell me to restart (as you can see in the fourth picture)
which just loops and brings me back to the beginning. So both System restore and command prompt just loop after being clicked.
Then there is Start-up Setting. Here when i click it, it displays the options shown in picture 5.
Then after clicking any of the f1 threw f10 options it restarts and goes back to the beginning.
Any more questions feel free to ask. If you still dont understand i shall try to make a video.

Stuck in auto repair loop.

Attempted to wake desktop running Windows 8.1 Pro (after typical MS update time Tuesday).
Computer would not load Windows, stuck in automatic repair loop.
Boot disk is 120GB SSD.
Created Recovery USB from good Windows 8.1 laptop.
Used diskpart and list vol to get:
Volume 0 C
System Rese NTFS
Partition 350MB
Healthy
Volume 1 F
RAW Partition
111GB Healthy
Volume 2 D
3TB NTFS
Partition 2794GB
Healthy
Volume 3 E
RECOVERY FAT32
Removable 14GB
Healthy
Exited diskpart
Ran: chkdsk /r /f f:
Got:
The type of the file system is NTFS.
Stage 1: Examining basic file system structure ...
293120 file records processed.
File verification completed.
8135 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Correcting error in index $SDH for file 9.
An unspecified error occurred (766f6c756d652e63 461)
If I use the Refresh Your PC option from recovery USB, I get: The drive where Windows is installed is locked. Unlock the drive and try again.

Update:
I ran diskpart again, and letters have changed, but boot volume still RAW:
Volume 0
F
System Rese
NTFS
Partition
350MB
Healthy
Volume 1
C
RAW
Partition
111GB
Healthy
Volume 2
D
3TB
NTFS
Partition
2794GB
Healthy
Volume 3
E
RECOVERY
FAT32
Removable
14GB
Healthy

[Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials

Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
1. Server Backup
Description:
Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
Operations:
On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
Start a backup for the server. (Figure 1)
Figure 1
More information:
Manage server backup in Windows Server Essentials
Restore or repair your server running Windows Server Essentials

3. Microsoft Azure Backup
Descriptions:
Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
Operations:
1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
Backup integration module”.
Figure 3
Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
Tools-> Internet Options-> Security->
Trusted sites-> Add this website to the zone and add
http://downlaod.microsoft.com,
https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
Figure 4
2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
InstallAddin log file if you can find some clues.)
3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
and Figure 6 show.
Figure 5
Figure 6
4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
Upload a certificate. (ii) Register your server.
(iii) Configure backup settings.
Figure 7
(i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
Please logon Windows Azure, select RECOVERY SERVICES and click
NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
QUICK CREATE. Please type NAME and select
REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
a public key for the vault. The certificate is used to register servers with the vault.
Figure 8
(ii). Register your server
On Dashboard, navigate to Online Backup and click Register. (Figure 9)
Figure 9
Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
Figure 10
When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
Figure 11
(iii). Configure backup settings
When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
all process will be shown in Figure 12-16.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
Figure 17
On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
Figure 18
After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
Figure 19
Figure 20
More information:
Manage Online Backup in Windows Server Essentials

Server 2012 R2 Essentials Trial Installation from USB asking for Product Key

Hi,
I've just downloaded Server 2012 R2 Essentials trial iso from Microsoft site (http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2-essentials).
The downloaded iso file is 9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.iso
I created a bootable USB using Windows7-USB-DVD-Download-Tool-Installer-en-US.exe installer and it automatically copied the server 2012 files from the iso file.
Once my server (HP MicroServer) is booted up from the USB, the server 2012 installation is asking me to key in the product key.
Please, can someone help me this. I just want to install a trial version.
Thanks in advance.

Try this: R9N79-23MWD-MBP9B-KHF8Q-C36WX

Windows Backup Retention: Server 2012 R2 Essentials

Hi,
We are backing up a Server 2012 R2 Essentials machine's files and folders, using Windows Server Backup, to an external hard drive. That backup drive is now 84% full. It is my understanding that Windows Server Backup will automatically delete old backups
when necessary, but does anybody know at what point that happens? When the target reaches 90%?
Thanks.

Hi,
Windows Server Backup will delete oldest backup when there is no enough space for storing a new backup.
You can also manually delete old backups with one of the following 2 methods - you can create a schedule so old backups will be deleted automatically before or after new backups created.
See:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/62488e7a-4638-430c-950c-e75ac42b0fa3/how-a-can-delete-old-versions
1. Deleting System State Backup: wbadmin delete systemstatebackup –keepversions:10
The above command will keep the latest 10 versions and delete the rest all the system state backups.
2. Deleting other backups: Backup application stores multiple backup versions in the VSS shadow copies. Hence, older backup version can be deleted by deleting older shadow copy. Commands to list and delete VSS shadow copies are
below. They need to be run in an elevated command window.
· vssadmin list shadows /for=x: – for listing the snapshots on x: where x: is the backup location
· vssadmin delete shadows /for=x: /oldest – for delete the oldest shadow copy. It can be called multiple times in case there is need to delete multiple older backups.
Note: wbadmin get versions or backup UI would still report deleted backups until next backup runs. At end of each backup – non-existent backups are removed from the backup catalog.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server 2012 R2 Essentials does not wake up clients

Hi!
I am trying to get my Server 2012 R2 Essentials (Hyper-V VM) to do nightly backups of my Win 8.1 client PCs. As far as I understand the server should be able to wake up the clients automatically from hibernate (I selected this option during setup of the
connector).
Unfortunately this does not seem to work and I don't find any easy way to test the wake up procedure. What is really annoying is that I don't even find any documentation how the wake up procedure actually works. Does it use Wake On Lan? Are there any magic
packets involved?
Any help is welcome.
Anguel

Larry, thank you for your reply. Yes, I had activated the wake-up option during connector setup. Regarding your recommendation to make the computers wake up through their BIOS I think this won't work as we don't know when Windows Server Backup will actually
back up each computer if you have multiple PCs. This would mean that we would have to leave the PCs on all night, or do I misunderstand something?
In the meantime I found a very nice YouTube video that seems to explain in details how the whole process works:
http://www.youtube.com/watch?v=c6ZOWjaZpIk
According to the video, the server simply schedules a task on the client PCs at some time in the range defined on the server: E.g. if I enter 11:00 - 12:00 this task seems to set a random wake-up time at e.g. 11:25 on the client PC. This task is then scheduled
to wake up the PC - didn't know that this is possible. I will now test again to see if this really works.
Another possible problem may be some special BIOS power settings, for example on my brand new Dell PCs there is a default Deep Sleep option in the BIOS concerning states S4 and S5. When this option was turned on (default) it prevented Wake On Lan from working
at all, although it was enabled in the BIOS, see e.g. here:
http://en.community.dell.com/support-forums/desktop/f/3514/t/19434669.aspx
I first thought that Deep Sleep may be causing my wake-up problem but now according to the video above backup seems to rely on task scheduler only and not on WOL, let's see...
In each case I am very very disappointed because of the lack of docs for the latest Windows Client/Server products.
UPDATE: It seems to work now. As discussed above the clients are woken up by the task set by the server in the task scheduler. This works in hibernate mode. Still wondering how the server exactly schedules backups as it does not know how long a client backup
will take and therefore does not know when to schedule the next PC...
IMHO Windows Server should have offered the possibility to use Wake On Lan too. This is a much nicer way to do backups. It can't be that hard for Microsoft to send out a magic packet which would also be able to wake up a client when the user has shut it
down.
Anguel

Access Database (.mdb) on Windows Server 2012 R2 Essentials

Hi guys, thanks for your time!
SCENARIO:
- Windows Server 2012 R2 Essentials
- Windows 7 Ultimate Clients (3 clients)
- VB6 application on clients using a MS Database (.mdb) hosted on the server.
- Clients access the database (.mdb) via a mapped network drive (K:).
PROBLEM:
- Microsoft Database (.mdb) on server gets corrupted frequently.
- Clients don't "flush their changes" back to the database: database was not updated.
WORKAROUND:
- Database was moved from the server to one of the Windows 7 clients.
- Application is running OK.
CONFIGURATION:
- Permissions are correct: network and NTFS.
- No faulty network hardware: switch, cabling, NICs.
- Computers and Server hardware is new.
- UPS are used everywhere.
SOME LINKS:
SMB 3.0
- Opportunistic Locking and Read Caching on Microsoft Windows Networks.
- Windows 7 cannot
open the shared MS Access database if it's opened by another user
- Initializing the
Microsoft Jet 4.0 Database Engine Driver
- Moved to
Server 2012 getting Access Database Corruption
Oplocks
- Configuring
opportunistic locking in Windows
- Understanding
offline files
- How to
enable and disable SMBv1, SMBv2, and SMBv3
- Is it possible to
monitor and log actual queries against an Access MDB?
Now, server is useless if it is not hosting our database. Any ideas, please? Do I need to diagnose using Wireshark? Or using Sysinternals Process Monitor? I think that is a waste of time.
Thank you!

Thanks for your reply.
Software is from a 3rd party provider. It currently supports concurrency. It was deployed on Windows XP. SQL Server would be a nice upgrade, however that is
not an option.
Something has changed with newer versions of Windows. That is what I am going to study in a lab I prepared with a real server and some clients.
File-sharing databases (Microsoft JET databases) are very old technology even before I was a college student. However, I have been very busy researching this technology.
It was made for multi-user environments. It is highly tied to file sharing services from Windows: SMB protocol.
Windows XP, Vista, 7 and 8 use different versions of this protocol. I think that is the root of the problem. With old technology, application was running fine.
With new technology, application is troublesome. I will check several things: JET drivers vs. ACE drivers, SMB tweaks, etc.
UPDATE:
Basically, there are 4 general answers to this issue:
1) Migrate your Access Database to SQL Server Express (or another RDBMS engine).
2) @Server: disable SMB 2.0/3.0 protocol stack by powershell command. Network speed decreases.
3) @Clients: disable client redirector caches by using regedit.
4) @Server: disable the leasing on the file server.
5) @Server: tuning Broadcom NIC parameters.
References:
- https://technet.microsoft.com/en-us/library/ff686200(WS.10).aspx
- https://msdn.microsoft.com/en-us/library/windows/desktop/aa365433(v=vs.85).aspx
- http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Q_28482197.html
- http://tipsntricks.sherr.co.uk/stop-smb-corrupting-files/
- http://www.dataaccess.com/whitepapers/opportunlockingreadcaching.html
- https://social.technet.microsoft.com/forums/windowsserver/en-US/67baa9fd-5eaf-438e-9cc4-dc1a531b9e19/disabling-oplocksmb2-vs-fileinfocachelifetime
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/7336d31b-6c24-468a-9c47-750244ae3a8c/moved-to-server-2012-getting-access-database-corruption
- https://social.technet.microsoft.com/Forums/en-US/e9567167-22db-4b8c-9f96-a08b97d507f9/server-2012-r2-file-server-stops-responding-to-smb-connections
- http://support2.microsoft.com/kb/2957623
- http://support2.microsoft.com/kb/2899011
- http://support2.microsoft.com/kb/2955164
- https://social.technet.microsoft.com/Forums/en-US/7bd0aa5b-eb95-40a8-a56d-c6013273665c/extremely-slow-smb-network-speed-server-2012-r2?forum=winserver8gen

Server 2012 R2 Essentials and Server 2012 Standard

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

Server 2012 R2 - Essentials Experience - - I jacked my CA and certificates all to @#&$%!!

Windows Server 2012 R2 - Essentials Experience
In trying to put pieces together, I jacked my CA and certificates all to @#&$%!!
Some of the factors involved are:
Server0 - Hyper-V Host
  Server1 - DC, 2012 R2 Essentials Experience role
  Server2 - Exchange 2013
Client Machines -
  Windows 7 Pro
  XP (Yes, these are my cross to bear... - worth noting their presence, but I'm working them out)
The functional requirements:
  Anywhere Access for Remote users
   - Remote Desktop for Windows 7 machines
  Outlook Web Access
The mistake... 'Web Application Proxy'
-which uninstalled the CA
There is a CA back now, but after days of spinning in cirles in a rare area where I feel nearly completely lost (Certificate services) I am asking for help getting these pieces put back together.
The current situation:
The network is up with all of the network and business services required to work 'Inside the Office' - so the client is "functional".
The "Essentials Experience" is broken and won't install to the clients, though it does provide the Essentials website, access to server shared files (fairly gracefully, I might add) and, as an administrator user, I can get to the servers via
RWA through the site and there are no certificate problems with that since I have a secured certificate for the domain.
OWA has been moved to a further back burner while I try to get the Essentials Experience functioning t the point where the remote users can get to their workstations through RWA... This is the biggest current hurdle... RWA for the clients.
Trying to install the client to the workstations nets me the "The Server is not available. Try connecting this computer again,..." message at the point of username and password authentication.
The clientdeploy.log finishes like this:
[4976] 141016.153746.2670: ClientSetup: Standard Error:
[4784] 141016.153746.2670: ClientSetup: The exit code of the process (C:\Windows\system32\nslookup.exe) is: 0
[4784] 141016.153746.2670: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[4784] 141016.153746.2670: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: Cannot write to the registry key.
  at Microsoft.Win32.RegistryKey.EnsureWriteable()
  at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
  at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
  at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[4784] 141016.153746.2670: ClientSetup: Exiting ValidateUserTask.Run
[4784] 141016.153746.2670: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[4784] 141016.153746.2670: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[4784] 141016.153746.2670: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1272] 141016.153755.0976: ClientSetup: Back from the Client Deployment Wizard
[1272] 141016.153755.0976: ServerDiscovery:HostsFileUpdater: Removing hosts file entry: 1-WGB-01
[1272] 141016.153755.0976: ClientSetup: Saving Wizard Data
[1272] 141016.153755.0976: ClientSetup: End of ClientDeploy: ErrorCode=1603
The computerconnector.log shows nothing of value.
What I want to accomplish as a 'first step' toward recovery is to get the workstations properly connected so they show up in the Dashboard 'Devices' pane and can be managed and access by the Essentials tools.
Secondarily, I would like to get the client side tools in place and functioning (I expect the latter will be a side effect of the former).
So,... for anyone patient enough to have read this far... uh,... help?

Actually,... I can now confirm the delicacy of which you speak...
After a support incident with Microsoft which spanned a marathon 18+ hours on the phone and remote access by no fewer than 7 Microsoft Engineers, we got to a successful result.
It is a point of utter frustration for me when people put in threads like this then don't bother to come back and report 'how the issue was solved', and sadly, I am about to have done that merely because my span of functional attention and valuable reporting
capability was basically gone before I submitted the ticket and following all that was done in my state was not conceivably possible.
So - all I can do is apologize for not being able to report a valuable resolution and give a few little tidbits.
The net result is this - DO WHAT YOU CAN TO AVOID THE SITUATION IN THE FIRST PLACE. Once your CA is in place, LEAVE IT THE $%@& ALONE!!!! I mean... my best current advice.
In all, the CA was uninstalled and reinstalled 4 times after my blunder and significant work was done in ADSIEdit as well as substantial manual manipulation of certificates and CAs that was well outside of my (quite considerable) scope of expertise.
I wish I had more to offer in the world of resolution.
With this said, I will make one more request of viewers and moderators alike:
THIS QUESTION IS OFFICIALLY NOT ANSWERED. IT WILL NEVER BE ANSWERED. THE RESOLUTION IS NOT AVAILABLE TO THE MORTAL MAN.
DO NOT MARK IT AS ANSWERED
IF YOU MUST DO SOMETHING, DELETE THE WHOLE THREAD, BUT DO NOT BURDON PEOPLE WHO ARE LOOKING FOR REAL ANSWERS WITH THE NECESSITY OF READING THROUGH THIS.
DO NOT MARK THIS QUESTION AS ANSWERED
I hope this makes sense for people, and I hope people will appreciate NOT having to read this as though there is some 'resolution' contained within.

Server 2012 r2 essentials...urgent help needed...Two separate DHCP servers, one for lan and one for wifi...design picture attached

hello
S2012 R2 essentials is in office...Want to have functional 2012 dhcp, dns, ad, wds role for 1gbps wired lan and separate wi-fi for temporary visitors for internet access like gsm phones etc...Need functional anywhere access to office server and computers
for administering...When worker with laptop go out of office must have have full functional wifi.
here is picture what i have in my mind with all components in network.
How to configure L3 switch, router and server? Many thanks

Hi,
Based on your description, I understand that you want to prepare network for the Windows Server 2012 R2 Essentials,
then will run a DHCP Server on the Windows Server 2012 R2 Essentials and correctly configure router. Please refer to following article and check if can help you.
Before You Install Windows Server 2012 Essentials
For DHCP, please refer to following article.
Running
DHCP Server on Windows Server 2012 Essentials
For router configuration, please refer to following article.
Configure a Router - Windows Server Essentials
If anything I misunderstand or any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Configuration failed for Windows Server Update Services on Server 2012 R2 Essentials (Trial Version)

Hi,
I'm trying to setup the WSUS on the Server 2012 R2 Essentials (Trial Version) but with no luck. Below are the logs generated. Hopefully someone can guide me on this. Thanks.
2014-10-15 12:23:06 Postinstall started
2014-10-15 12:23:06 Detected role services: Api, UI, WidDatabase, Services
2014-10-15 12:23:06 Start: LoadSettingsFromXml
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-10-15 12:23:06 Value is true
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2014-10-15 12:23:06 Value is C:\WSUS
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Content directory is C:\WSUS
2014-10-15 12:23:06 Database roleservice is not installed
2014-10-15 12:23:06 End: LoadSettingsFromXml
Post install is starting
2014-10-15 12:23:06 Start: Run
2014-10-15 12:23:06 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:06 Fetching WsusReportersSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:19 Configuring content directory...
2014-10-15 12:23:19 Configuring groups...
2014-10-15 12:23:19 Starting group configuration for WSUS Administrators...
2014-10-15 12:23:19 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Starting group configuration for WSUS Reporters...
2014-10-15 12:23:22 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Configuring permissions...
2014-10-15 12:23:22 Fetching content directory...
2014-10-15 12:23:22 Fetching ContentDir from registry store
2014-10-15 12:23:22 Value is C:\WSUS
2014-10-15 12:23:22 Fetching group SIDs...
2014-10-15 12:23:22 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:22 Fetching WsusReportersSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:22 Creating group principals...
2014-10-15 12:23:22 Granting directory permissions...
2014-10-15 12:23:23 Granting permissions on content directory...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Configuring shares...
2014-10-15 12:23:23 Configuring network shares...
2014-10-15 12:23:23 Fetching content directory...
2014-10-15 12:23:23 Fetching ContentDir from registry store
2014-10-15 12:23:23 Value is C:\WSUS
2014-10-15 12:23:23 Fetching WSUS admin SID...
2014-10-15 12:23:23 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:23 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:23 Content directory is local, creating content shares...
2014-10-15 12:23:25 Creating share "UpdateServicesPackages" with path "C:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published
on this WSUS system."
2014-10-15 12:23:25 Creating share...
2014-10-15 12:23:25 Share successfully created
2014-10-15 12:23:25 Creating share "WsusContent" with path "C:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-10-15 12:23:26 Creating share...
2014-10-15 12:23:26 Share successfully created
2014-10-15 12:23:26 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-10-15 12:23:27 Creating share...
2014-10-15 12:23:27 Share successfully created
2014-10-15 12:23:27 Finished creating content shares
2014-10-15 12:23:27 Stopping service WSUSService
2014-10-15 12:23:27 Stopping service W3SVC
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
2014-10-15 12:23:28 Switching database to single user mode...
2014-10-15 12:23:32 Loading install type query...
2014-10-15 12:23:32 DECLARE @currentDBVersion int
DECLARE @scriptMajorVersion int = (9600)
DECLARE @scriptMinorVersion int = (16384)
DECLARE @databaseMajorVersion int
DECLARE @databaseMinorVersion int
DECLARE @databaseBuildNumber nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
IF (@delimiterPosition = 0)
BEGIN
RAISERROR('Invalid schema version number', 16, 1) with nowait
return
END
SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE
BEGIN
IF (@scriptMajorVersion > @databaseMajorVersion OR
(@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
BEGIN
SELECT 2
END
ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
@scriptMinorVersion = @databaseMinorVersion)
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
END
2014-10-15 12:23:32 Install type is: Reinstall
2014-10-15 12:23:32 Creating logins...
2014-10-15 12:23:32 Fetching account info for S-1-5-20
2014-10-15 12:23:32 Found principal
2014-10-15 12:23:32 Found account
2014-10-15 12:23:32 Got binary SID
2014-10-15 12:23:35 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:35 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Fetching account info for S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Found principal
2014-10-15 12:23:35 Found account
2014-10-15 12:23:35 Got binary SID
2014-10-15 12:23:35 Setting content location...
2014-10-15 12:23:35 Fetching ContentDir from registry store
2014-10-15 12:23:35 Value is C:\WSUS
2014-10-15 12:23:40 Swtching DB to multi-user mode......
2014-10-15 12:23:47 Finished setting multi-user mode
2014-10-15 12:23:47 Writing DB settings to registry...
2014-10-15 12:23:47 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-10-15 12:23:47 Starting service W3SVC
2014-10-15 12:23:47 Configuring IIS...
2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The system cannot find the path specified.

2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
Looks like it failed trying to setup the website.
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
This also looks like its a RE-installation of WSUS.
Any chance the "WSUS Administration" v-root is already present and did not get deleted after the last uninstallation?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

A few bumps from whs to Server 2012 R2 Essentials

I'm a typical WHS user looking to upgrade (non-business use) for a simple storage area and being able to back up the laptops and PCs in the house.
Problem not solved:
Perhaps not a Server 2012 r2 Essential problem but my WDTV Live can't access the shared folders. After installing the media server add-on for Server R2 Essentials the WDTV Live is able to see the server via the media server but its messy and cluttered and
also reports no media found within folders.
With WHS I was able to view the shared folders easily. Have not been able to enable the shared folders with the WDTV Live...
Big thanks for any help, Microsoft Server 2012 R2 Essentials seems like overkill for home use but I'm really liking it.

Thank you very much for the reply.
I have installed Serviio and things seem somewhat better, just getting Serviio's preferences setup. Dont' need artists/date/etc. info and I'm setting it in preferences.
Just need a simple media folder structure:
Video folder/Videofile + Videofile.jpg
Picture Folder/JPGs
Music Folder/MP3s
Was hoping share folders would be the simple way to go but WDTV still can't access shared folders from server.
Don't really need transcoding because WDTV handles the x264 and VLC handles it on the family PCs.
So close to finish now, I'll bug in another thread about anywhere access as it's just a bonus and not really needed.
Again, thank you for help, just need to figure out how to un-install the microsoft media server now...

Server 2012 R2 Essentials stuck in Automatic repair loop on every reboot

Similar Messages

Maybe you are looking for