Server 2012 R2 Essentials - Webpages not working

Hi,
Just completed the initial essential experience configuration and added the DNS service.
Have set up DNS on the server and and I know the router (which is the only one in the network) is working. The dns service is running and the server says it is fully connected to the internet.
Problem is I can't access any websites. When I try to access the router web interface (which the server is directly conneced to) I get a message-box saying I can't open that page and nothing happens (this works with other computers). I can't access any other
web pages either. (eg. google.com)
Not sure what might be the issue, any help or do i need for information?

Hi,
à
I can't access any other web pages either. (eg. google.com)
Would you please let me know whether you can access any website on other client computers? Just a confirmation,
thanks for your understanding.
Did you install any third-party security software on the server? Please temporarily disable firewall and security
software, then check if this issue still exists.
On the server, please ping the router via IP address and monitor the result. Meanwhile, please ping a public
IP via PathPing command. Any find?
By the way, would you please run
ipconfig /all command on the Windows Server 2012 R2 Essentials and client computer, then collect the result and post here? (Please hide all protected or private information.)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Server 2012 R2 Essentials does not wake up clients

Hi!
I am trying to get my Server 2012 R2 Essentials (Hyper-V VM) to do nightly backups of my Win 8.1 client PCs. As far as I understand the server should be able to wake up the clients automatically from hibernate (I selected this option during setup of the
connector).
Unfortunately this does not seem to work and I don't find any easy way to test the wake up procedure. What is really annoying is that I don't even find any documentation how the wake up procedure actually works. Does it use Wake On Lan? Are there any magic
packets involved?
Any help is welcome.
Anguel

Larry, thank you for your reply. Yes, I had activated the wake-up option during connector setup. Regarding your recommendation to make the computers wake up through their BIOS I think this won't work as we don't know when Windows Server Backup will actually
back up each computer if you have multiple PCs. This would mean that we would have to leave the PCs on all night, or do I misunderstand something?
In the meantime I found a very nice YouTube video that seems to explain in details how the whole process works:
http://www.youtube.com/watch?v=c6ZOWjaZpIk
According to the video, the server simply schedules a task on the client PCs at some time in the range defined on the server: E.g. if I enter 11:00 - 12:00 this task seems to set a random wake-up time at e.g. 11:25 on the client PC. This task is then scheduled
to wake up the PC - didn't know that this is possible. I will now test again to see if this really works.
Another possible problem may be some special BIOS power settings, for example on my brand new Dell PCs there is a default Deep Sleep option in the BIOS concerning states S4 and S5. When this option was turned on (default) it prevented Wake On Lan from working
at all, although it was enabled in the BIOS, see e.g. here:
http://en.community.dell.com/support-forums/desktop/f/3514/t/19434669.aspx
I first thought that Deep Sleep may be causing my wake-up problem but now according to the video above backup seems to rely on task scheduler only and not on WOL, let's see...
In each case I am very very disappointed because of the lack of docs for the latest Windows Client/Server products.
UPDATE: It seems to work now. As discussed above the clients are woken up by the task set by the server in the task scheduler. This works in hibernate mode. Still wondering how the server exactly schedules backups as it does not know how long a client backup
will take and therefore does not know when to schedule the next PC...
IMHO Windows Server should have offered the possibility to use Wake On Lan too. This is a much nicer way to do backups. It can't be that hard for Microsoft to send out a magic packet which would also be able to wake up a client when the user has shut it
down.
Anguel

SQL Server 2012 Database Email is not working with AWS SES Services

Hi Greetings to all,
I have issue with the SQL Server Database mail Services. I have Configured Amazon Simple Email Services (AWS SES) as db profile in SQL Server and for last 2 years its working perfectly. But, from last two days on wards it is not working properly the Emails
are queued but not sent to the recipients. the SES Services are working fine in outlook. but, not working in SQL Server.
Please help on this. tried changing the ports no result only one or two emails only sent remaining are failing.the info messages is as below
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 10 (2015-04-10T17:12:41). Exception Message: Cannot send mails to mail server. (The operation has timed out.).
RehaanKhan. M

Hello,
Try to use port 465, port 2587 or port 587 instead of using port 25, as explained on the following articles.
http://docs.aws.amazon.com/ses/latest/DeveloperGuide/smtp-issues.html
http://docs.aws.amazon.com/ses/latest/DeveloperGuide/smtp-connect.html
The first of above URLs is intended for troubleshooting SMTP issues in general.
Verify you the mail account has not reached any limit. Limit of emails per day, per second, etc.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

New Server 2012 install - Active Directory not working properly

We recently converted from 2003 to 2012. Our 2012 R2 server seems to be running fine. We did a DCPROMO on the OLD 2003 DC just fine but now there are all sorts of odd errors (Sharepoint can't authenticate users, Can't run Exchange 2013 on another 2012 server
because it can't find AD, etc.)
on the DC we have a Group Policy error 1096. "Group Policy Object LDAP://CN=User,cn={2B476B3E-2749-4B1B-8EC1-F5672A66F94F},cn=policies,cn=system,DC=mydom,DC=local\\mydom.local\SysVol\mydom.local\Policies\{2B476B3E-2749-4B1B-8EC1-F5672A66F94F}\User\registry.pol"
So far I haven't found anything on how to fix this (and the AD itself.) There are some errors in the DCDIAG log, too:
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\ISD-DC1\netlogon)
         [ISD-DC1] An net use or LsaPolicy operation failed with error 67,
         The network name cannot be found..
Starting test: FrsEvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared. Failing SYSVOL replication problems may cause
         Group Policy problems.
Any suggestions how we can fix these errors are greatly appreciated!

Hi,
Did you migrate the Active Directory from Windows server 2003 to Windows server 2012?
Please refer to this article:
https://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Regards.
Vivian Wang

Media Streaming in Windows Server 2012 R2 Essentials Quality not good !

   I have media in windows 8.1 workstation. Made a VM on it (win2012r2) + made a Essentials and Media pack and enabled the highest quality streaming ("best").
   When I test the test 34 mb video on lumia 1520 I find that quality is very degraded. I studied that if you set the highest quality the processor should be good otherwise there would be effect of buffering and lags. But in my case, only problem
my 720p video seems like 240p and no pauses or lags.
   Is there a way to improve that ? ( I have strong Wifi Router to handle the bandwidth ).
   Everything above started from the fact that I could not browse my media files by opening a pc share folder from lumia 1520. if I could open the share folder, I could instantly copy and play from there while I am roaming.
That leaves me to the only option to attach USB, copy data and then test each new video, which is very slow process wise.
Shahid Roofi

You are serving media from an essentials VM on a win 8 box? Did I get that right? In any case. Media Streaming is not a real strong point for essentials. I would look at Serviio or Plex
Grey

SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2

I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.

Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com

Server 2012 R2 - Essentials Experience - - I jacked my CA and certificates all to @#&$%!!

Windows Server 2012 R2 - Essentials Experience
In trying to put pieces together, I jacked my CA and certificates all to @#&$%!!
Some of the factors involved are:
Server0 - Hyper-V Host
  Server1 - DC, 2012 R2 Essentials Experience role
  Server2 - Exchange 2013
Client Machines -
  Windows 7 Pro
  XP (Yes, these are my cross to bear... - worth noting their presence, but I'm working them out)
The functional requirements:
  Anywhere Access for Remote users
   - Remote Desktop for Windows 7 machines
  Outlook Web Access
The mistake... 'Web Application Proxy'
-which uninstalled the CA
There is a CA back now, but after days of spinning in cirles in a rare area where I feel nearly completely lost (Certificate services) I am asking for help getting these pieces put back together.
The current situation:
The network is up with all of the network and business services required to work 'Inside the Office' - so the client is "functional".
The "Essentials Experience" is broken and won't install to the clients, though it does provide the Essentials website, access to server shared files (fairly gracefully, I might add) and, as an administrator user, I can get to the servers via
RWA through the site and there are no certificate problems with that since I have a secured certificate for the domain.
OWA has been moved to a further back burner while I try to get the Essentials Experience functioning t the point where the remote users can get to their workstations through RWA... This is the biggest current hurdle... RWA for the clients.
Trying to install the client to the workstations nets me the "The Server is not available. Try connecting this computer again,..." message at the point of username and password authentication.
The clientdeploy.log finishes like this:
[4976] 141016.153746.2670: ClientSetup: Standard Error:
[4784] 141016.153746.2670: ClientSetup: The exit code of the process (C:\Windows\system32\nslookup.exe) is: 0
[4784] 141016.153746.2670: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[4784] 141016.153746.2670: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: Cannot write to the registry key.
  at Microsoft.Win32.RegistryKey.EnsureWriteable()
  at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
  at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
  at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[4784] 141016.153746.2670: ClientSetup: Exiting ValidateUserTask.Run
[4784] 141016.153746.2670: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[4784] 141016.153746.2670: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[4784] 141016.153746.2670: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1272] 141016.153755.0976: ClientSetup: Back from the Client Deployment Wizard
[1272] 141016.153755.0976: ServerDiscovery:HostsFileUpdater: Removing hosts file entry: 1-WGB-01
[1272] 141016.153755.0976: ClientSetup: Saving Wizard Data
[1272] 141016.153755.0976: ClientSetup: End of ClientDeploy: ErrorCode=1603
The computerconnector.log shows nothing of value.
What I want to accomplish as a 'first step' toward recovery is to get the workstations properly connected so they show up in the Dashboard 'Devices' pane and can be managed and access by the Essentials tools.
Secondarily, I would like to get the client side tools in place and functioning (I expect the latter will be a side effect of the former).
So,... for anyone patient enough to have read this far... uh,... help?

Actually,... I can now confirm the delicacy of which you speak...
After a support incident with Microsoft which spanned a marathon 18+ hours on the phone and remote access by no fewer than 7 Microsoft Engineers, we got to a successful result.
It is a point of utter frustration for me when people put in threads like this then don't bother to come back and report 'how the issue was solved', and sadly, I am about to have done that merely because my span of functional attention and valuable reporting
capability was basically gone before I submitted the ticket and following all that was done in my state was not conceivably possible.
So - all I can do is apologize for not being able to report a valuable resolution and give a few little tidbits.
The net result is this - DO WHAT YOU CAN TO AVOID THE SITUATION IN THE FIRST PLACE. Once your CA is in place, LEAVE IT THE $%@& ALONE!!!! I mean... my best current advice.
In all, the CA was uninstalled and reinstalled 4 times after my blunder and significant work was done in ADSIEdit as well as substantial manual manipulation of certificates and CAs that was well outside of my (quite considerable) scope of expertise.
I wish I had more to offer in the world of resolution.
With this said, I will make one more request of viewers and moderators alike:
THIS QUESTION IS OFFICIALLY NOT ANSWERED. IT WILL NEVER BE ANSWERED. THE RESOLUTION IS NOT AVAILABLE TO THE MORTAL MAN.
DO NOT MARK IT AS ANSWERED
IF YOU MUST DO SOMETHING, DELETE THE WHOLE THREAD, BUT DO NOT BURDON PEOPLE WHO ARE LOOKING FOR REAL ANSWERS WITH THE NECESSITY OF READING THROUGH THIS.
DO NOT MARK THIS QUESTION AS ANSWERED
I hope this makes sense for people, and I hope people will appreciate NOT having to read this as though there is some 'resolution' contained within.

Windows Server 2012 R2 Essentials Trial Key - Did I miss it, too?

I tried both "Windows Server 2012 Essentials" and "Windows Server 2012 R2 Essentials". Here is the link to the page I downloaded the images:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
The following are the respective links to the images I used which were provided by the above webpage:
http://care.dlservice.microsoft.com/dl/download/1/2/9/129AEC4F-1C6C-44B2-9B61-77935E8AB1F4/WindowsServer2012Essentials-English-Install.iso
http://care.dlservice.microsoft.com/dl/download/8/F/7/8F7024D2-AB2A-4BE2-8406-1E3AC49C5C1F/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO
I tried burning these images to DVD and booting my Intel NUC with resulting disc. Setup goes fine but it asks me for a product key. I have not received any mail nor was there any pointers to a product key. This is why I tried both R1 and R2.
I found a similar post here regarding this issue (in fact I found a couple):
http://social.technet.microsoft.com/forums/windowsserver/en-US/db7fd5b9-f58d-4456-86cf-816ec91ded14/windows-server-2012-trial-key-did-i-miss-it
But the answers were unsatisfactory, so please do not give me the same response.
Just in case the question/directive comes up, I redownloaded and re-burned the images using sector verification. There are no checksums posted on the site so who knows if something got broken while downloading it, but I find it extremely unlikely that
a few bad sector would cause the intaller to forget its evaluation key rather than borking the whole installer.
Further note that I tried "Windows Server 2012 R2" (standard / non-essentials) and that image correctly had the trial versions baked in. So, I would bet dollars to donuts the problem lies in the images not in a download / burn failure.
I want to use the new NUC as a central content/backup server for all the home computers which are unfortunately growing at bunny reproduction rates. Since Windows Home Server was discontinued, I was pointed to Server 2012 R2 as the alternative / upsell.
Let me know if this is the case or if a better-fit product exists.
Also, is the "Essentials" install a simply a licensing matter (e.g., 25 user cap) or is it more fundamentally crippled than the standard version? I am only a home enthusiast and so not really interested in using the product in a production environment.
I only want some ensurance that if I download "standard", I can put in an "essentials" key at the end of evaluation. If not, then please point me to a correct "Windows Server 2012 R2 Essentials" trial image.
Thanks,
Ryan

Hi Ryan,
à
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
We can find following description from this TechNet Evaluation Center website. Then please check if you can
find product key.
In addition, for Windows Server 2012 Essentials, please check if you can use
HHRHF-YMNJW-RPGCC-VV68W-BWMVY. For Windows Server 2012 R2 Essentials, please check if you can use
R9N79-23MWD-MBP9B-KHF8Q-C36WX.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How do I deactivate a license key for server 2012 r2 essentials

I bought a retail version of server 2012 r2 essentials to upgrade my 2003. I found my software is not compatible with "essentials" and it
is compatible with "Standard". Now I am buying a retail standard edition. My buddy is interested in the "essentials" for his server.

Strange... Server Essentials IS Server with some add ons. What tells you it will not work? Or is support for your program just balking?
As for your bud... let him call MS if it does not activate and explain a hardware failure. They will give him a new key... but it should not be necessary for the second install attempt.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

How can I upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials?

I have just installed Windows Server 2012 Essentials on my Home Network (from the installation DVD). I have done absolutely no configuration Installing Server 2012 was an oversight; I meant to install Server 2012 R2 Essentials.
I tried to correct by installing R2 from its DVD, hoping it would do an upgrade. That didn't work.
Is there a simple way to make it possible to install the correct OS?   For example, can I just demote the existing server and remove any roles that were installed, so that the R2 disk will install over top of the existing installation?
Alternatively, is it safe to just reformat the partition and install R2?
http://technet.microsoft.com/en-us/library/dn408635.aspx seems to imply that this is OK.
David Pike, P.Eng, MCITP

Hi Larry.   Thanks for the reply. It didn't work, but I don't believe you are wrong. Rather I think there is something weird in my system. I'm marking your reply as answer.
Some background: I'm repurposing an older PC (Compaq SR1614X) as a home server, to manage my home network, use as a gateway to my Azure server, and to help my Server 2012 training (on MVA). I've been messing with it for nearly two months,
on and off. From the start, I've had trouble installing the server 2012 software (see previous threads August-27 and August-16
), but when I got to the point that I could install Server 2012 Essentials, I thought I could upgrade to Server 2012 R2 Essentials exactly as you suggest. That was where you helped me a lot, i.e. you confirmed that my expectations were reasonable.
So when it didn't work, I spent most of yesterday trying various different procedures. I got tantalizingly close, but still no cigar.
I can install any Windows Client and Server 2012 Essentials, but the R2 Essentials installation never finishes; it goes into an "error 0x000000C4" boot loop. At first I wondered if it was because I was installing a server over a
server, but you confirmed that's not the issue. I later verified that I cannot install R2 over Windows 7 either, whereas R1 over Win7 is fine. I can only surmise one of two problems:
I have a bad installation disk
There is a hardware issue
I plan to eliminate (1) by creating a new disk from a new download. I have verified that the latest ISO file and the one I have been using have identical byte counts,
For (2), I had suspected that the problem was that the older system has no UEFI, but since R1 installs OK, I am discounting that. Today's effort: to eliminate the DVD drive, I will try booting from a Flash Drive. To eliminate
the hard drive, I will try installing to a different drive.
I am hoping you can help with one more thing. When I run setup.exe with the /noreboot option, I have a better chance of success. The option suppresses the first reboot only, but that one (after "Expanding the setup files") always
fails, so suppressing it gets me almost to the end of the install. Is there a way to modify setup.exe so the it always runs with the /noreboot option?

Need More Info on Server 2012 R2 Essentials

I'm currently running Server 2008 R2 Foundation for my wife's (1 person) online business, and have been looking at 2012 R2 Foundation vs Essentials. The latter sounds like a better fit, since in my absence, my wife has limited IT knowledge/experience, but
I need more information:
1) Can Essentials be run in a WORKGROUP instead of a domain? I currently have my server that way, and it serves our needs very well.
2) I read in some of the forums that while essentials allows 25 users, only two can be logged in concurrently. Is that true, or am I missing something?
3) Server 2012 R2 Foundation DOES NOT require CALs for local LAN users, is this also true with 2012 R2 Essentials? Also, how much are the CALS for RDP users?
Capt. Dinosaur

Hi again, Grey, and thank you for your response. I do appreciate your detail, and I'll answer them each in turn.
"1) http://technet.microsoft.com/en-us/library/dn281793.aspxMust be the domain controller at the root of the forest and
domain, and must hold all the FSMO roles."
Well I guess if it must it must, although I don't understand why the (first) response above states emphatically that a workgroup can be used. I prefer a workgroup because I understand it much better than a domain setup, and I don't understand Active
Directory etc. When I bought my server in 2011 I hired someone to set up the os for me. I also purchased Mark Minasi's book on 2008 R2, but so much of it was over my head. Fifty five years in the computer business, and today I feel as though
I've never seen one before (hence the name Capt. Dinosaur). I am, however, signed up for a course in Managing Windows Server 2012 which starts in January. I hope that helps get through my aging grey matter. All these initials and acronyms
are total confusion to me, along with my case of chronic CRS (Can't Remember Squat).
"2) If you say you have 3 different users logged into Foundation with RDP I
am not going to argue. I know the license only allows for 2
administrative connections. http://technet.microsoft.com/en-us/library/cc770759.aspx
The default connection (RDP-Tcp) only allows a maximum of two simultaneous
remote connections."
I currently have two licenses for 2008 R2 Foundation, and Ithe users who log in to those remotely are
NOT administrator accounts. I don't know if that makes a difference, but I've had both users logged in from Florida and I was logged in (as an administrator) from a local workstation. I had to test that early on to make sure
that my two users could log in concurrently, and that I could be logged in to manage the system.
"As a rule we do not suggest you use your server as a workstation. ..."
Maybe I misled you with something I said, but I/we do not use the server as a workstation. Sometimes, though infrequently, I have to log in to the server directly (as Administrator) to do or fix something, but do not stay on it for
normal work. When we're home my (Dell Precision Mobile) Workstation is connected to my LAN. I also do software development on that workstation. I have a development environment on an external eSATA drive attached to my workstation,
and both a beta and a live environment on the server; I use my workstation to operate all three.
"... And I really have no clue what would happen if you
restored your dell box to something else. It may fail activation.
Guess you need to try that sometime. ..."
I have tried it, albeit to another - but completely different Dell box, which is normally the only brand I use; that's a holdover from my mainframe/minicomputer days when having a mixed shop was seriously avoided - with a clean bare HDD, and it
worked. When the restoration was executed, True Image asked only that you provide the drivers for the new computer, and they do the rest.
" ... The advantage to the Essentials client backup is it will backup a whole lot of PC's to the server and use data dedupe to keep the backup database small. So it would backup your wife's PC at
work and the 3 you have on the road."
I should explain that my wife's office is in our basement at home, in a separate room from my computer room. My wife has a second business making gourmet wine infused jams, and we built a FDA certified canning kitchen
in the basement, and her workstation is there so that she can work at both businesses. Her workstation, my server and my workstation are backed up weekly to hard drives in a docking station, and stored in a fire resistant safe. The
computers we have on the road are my mobile workstation and her laptop. When my daughter comes along, she also brings her laptop. Since no company information is stored on any of the workstations, only the server data are mission critical.
"But in any case if what
you have is doing what you want. You don't seem to want what essentials
offers, Active Directory, Remote Access, or Client backup, so why change?"<o:p></o:p>
I guess I'm something like the man who bought a tuxedo and so now he has to start looking for formal dances to attend. I should explain that we live in a very rural area - our town has a population of 1,000, 60% of the country is National
Forest, and my home is literally in in it, bordered by it on two sides - and have only a very small technical college here. I need to learn all about the server OS and how to administer it so that I don't
have to hire someone when something needs to be done, and 2012 R2 is the only course available within 100 miles - up until this year they were only offering 2003, and even that was at a different campus 60 miles away (and over a 2,000' mountain).
Since the course I'll be taking is for '12, I'm simply looking to upgrade so that what I have is what the course covers. All my other computers are running Windows 7 (Pro and/or Ultimate)
"More on #1 Active Directory gives you group policy and more control over file permissions than workgroup. Say you had a folder shared and it had your bank.xls You could give your wife permission to see it but not your daughter.
Group Policy is probably not a big deal for one client PC. The advantage is you can make one setting and it can be applied to hundreds of PC's"
Actually I have remote access now in '08 R2 Foundation, and I'm not sure what Active Directory will buy me, but that could, of course, change when I get into the course. Not having Group Policies has been a small problem,
on one or two rare occasions, so that could be a game changer for me, but with what I have now, I've been able to set up my political campaign system such that
no one from one campaign can see or access any data for any other campaign. Also I was able to set up the user accounts so that a remote user logging in
can not see nor execute anything except the campaign system. Any attempt to do otherwise automatically logs them out.
In summation, you may just have convinced me that using a domain instead of a workgroup, with all it advantages might just be the way for me to go, since hopefully I'll learn all about that when I take that course. The limitation of only two concurrent
RDS users, however, is still worrying me, and I'm not sure that I'm accurately communicating. If the
two concurrent RDS user limitation ONLY refers to
Administrator accounts then there's no problem, because any user accounts other than those for my wife and myself,
would not be Administrator accounts. I can't remember whether 2008 R2 foundation supports
"Power User" accounts, but if so, that would be the highest level any other users would have, and possibly not even that high.
Capt. Dinosaur

Join multiple Server 2012 R2 essentials to a domain

Hi to all
I was looking at the anoucement that it is now possible to connect multiple essential servers to a single office 365 environment. Glad to hear that as I'm planning to implent several essential servers to a single company that is spreaded over several locations.
Reason for this, is that each branch only has up to 12 employees.
I wanted to ask if it is still not possible to connect several essential servers into a single domain? As example having one main office with essential (or even standard) and adding branch offices to the domain, each with essentials.
Or would I need Windows Server Standard and add the essential mask on it to make this work?
Thanks for your input

Hi geocast,
Would you please let me confirm whether it's Windows Server 2012 R2 Standard/Datacenter with the Windows Server Essentials Experience role installed or just Windows Server 2012 R2 Essentials? Just a confirmation, thanks for your understanding.
Please refer to following articles and check if can help you.
Add Windows Server Essentials as a Member Server
Deploying Windows Server 2012 R2 Standard/Datacenter
with Windows Server Essentials Experience role in an Existing Active Directory Environment
Deploying Windows Server 2012 R2 Essentials in an Existing Active Directory Environment
If anything I misunderstand or any update, please don't hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Access Database (.mdb) on Windows Server 2012 R2 Essentials

Hi guys, thanks for your time!
SCENARIO:
- Windows Server 2012 R2 Essentials
- Windows 7 Ultimate Clients (3 clients)
- VB6 application on clients using a MS Database (.mdb) hosted on the server.
- Clients access the database (.mdb) via a mapped network drive (K:).
PROBLEM:
- Microsoft Database (.mdb) on server gets corrupted frequently.
- Clients don't "flush their changes" back to the database: database was not updated.
WORKAROUND:
- Database was moved from the server to one of the Windows 7 clients.
- Application is running OK.
CONFIGURATION:
- Permissions are correct: network and NTFS.
- No faulty network hardware: switch, cabling, NICs.
- Computers and Server hardware is new.
- UPS are used everywhere.
SOME LINKS:
SMB 3.0
- Opportunistic Locking and Read Caching on Microsoft Windows Networks.
- Windows 7 cannot
open the shared MS Access database if it's opened by another user
- Initializing the
Microsoft Jet 4.0 Database Engine Driver
- Moved to
Server 2012 getting Access Database Corruption
Oplocks
- Configuring
opportunistic locking in Windows
- Understanding
offline files
- How to
enable and disable SMBv1, SMBv2, and SMBv3
- Is it possible to
monitor and log actual queries against an Access MDB?
Now, server is useless if it is not hosting our database. Any ideas, please? Do I need to diagnose using Wireshark? Or using Sysinternals Process Monitor? I think that is a waste of time.
Thank you!

Thanks for your reply.
Software is from a 3rd party provider. It currently supports concurrency. It was deployed on Windows XP. SQL Server would be a nice upgrade, however that is
not an option.
Something has changed with newer versions of Windows. That is what I am going to study in a lab I prepared with a real server and some clients.
File-sharing databases (Microsoft JET databases) are very old technology even before I was a college student. However, I have been very busy researching this technology.
It was made for multi-user environments. It is highly tied to file sharing services from Windows: SMB protocol.
Windows XP, Vista, 7 and 8 use different versions of this protocol. I think that is the root of the problem. With old technology, application was running fine.
With new technology, application is troublesome. I will check several things: JET drivers vs. ACE drivers, SMB tweaks, etc.
UPDATE:
Basically, there are 4 general answers to this issue:
1) Migrate your Access Database to SQL Server Express (or another RDBMS engine).
2) @Server: disable SMB 2.0/3.0 protocol stack by powershell command. Network speed decreases.
3) @Clients: disable client redirector caches by using regedit.
4) @Server: disable the leasing on the file server.
5) @Server: tuning Broadcom NIC parameters.
References:
- https://technet.microsoft.com/en-us/library/ff686200(WS.10).aspx
- https://msdn.microsoft.com/en-us/library/windows/desktop/aa365433(v=vs.85).aspx
- http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Q_28482197.html
- http://tipsntricks.sherr.co.uk/stop-smb-corrupting-files/
- http://www.dataaccess.com/whitepapers/opportunlockingreadcaching.html
- https://social.technet.microsoft.com/forums/windowsserver/en-US/67baa9fd-5eaf-438e-9cc4-dc1a531b9e19/disabling-oplocksmb2-vs-fileinfocachelifetime
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/7336d31b-6c24-468a-9c47-750244ae3a8c/moved-to-server-2012-getting-access-database-corruption
- https://social.technet.microsoft.com/Forums/en-US/e9567167-22db-4b8c-9f96-a08b97d507f9/server-2012-r2-file-server-stops-responding-to-smb-connections
- http://support2.microsoft.com/kb/2957623
- http://support2.microsoft.com/kb/2899011
- http://support2.microsoft.com/kb/2955164
- https://social.technet.microsoft.com/Forums/en-US/7bd0aa5b-eb95-40a8-a56d-c6013273665c/extremely-slow-smb-network-speed-server-2012-r2?forum=winserver8gen

Server 2012 r2 essentials...urgent help needed...Two separate DHCP servers, one for lan and one for wifi...design picture attached

hello
S2012 R2 essentials is in office...Want to have functional 2012 dhcp, dns, ad, wds role for 1gbps wired lan and separate wi-fi for temporary visitors for internet access like gsm phones etc...Need functional anywhere access to office server and computers
for administering...When worker with laptop go out of office must have have full functional wifi.
here is picture what i have in my mind with all components in network.
How to configure L3 switch, router and server? Many thanks

Hi,
Based on your description, I understand that you want to prepare network for the Windows Server 2012 R2 Essentials,
then will run a DHCP Server on the Windows Server 2012 R2 Essentials and correctly configure router. Please refer to following article and check if can help you.
Before You Install Windows Server 2012 Essentials
For DHCP, please refer to following article.
Running
DHCP Server on Windows Server 2012 Essentials
For router configuration, please refer to following article.
Configure a Router - Windows Server Essentials
If anything I misunderstand or any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Configuration failed for Windows Server Update Services on Server 2012 R2 Essentials (Trial Version)

Hi,
I'm trying to setup the WSUS on the Server 2012 R2 Essentials (Trial Version) but with no luck. Below are the logs generated. Hopefully someone can guide me on this. Thanks.
2014-10-15 12:23:06 Postinstall started
2014-10-15 12:23:06 Detected role services: Api, UI, WidDatabase, Services
2014-10-15 12:23:06 Start: LoadSettingsFromXml
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-10-15 12:23:06 Value is true
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2014-10-15 12:23:06 Value is C:\WSUS
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Content directory is C:\WSUS
2014-10-15 12:23:06 Database roleservice is not installed
2014-10-15 12:23:06 End: LoadSettingsFromXml
Post install is starting
2014-10-15 12:23:06 Start: Run
2014-10-15 12:23:06 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:06 Fetching WsusReportersSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:19 Configuring content directory...
2014-10-15 12:23:19 Configuring groups...
2014-10-15 12:23:19 Starting group configuration for WSUS Administrators...
2014-10-15 12:23:19 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Starting group configuration for WSUS Reporters...
2014-10-15 12:23:22 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Configuring permissions...
2014-10-15 12:23:22 Fetching content directory...
2014-10-15 12:23:22 Fetching ContentDir from registry store
2014-10-15 12:23:22 Value is C:\WSUS
2014-10-15 12:23:22 Fetching group SIDs...
2014-10-15 12:23:22 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:22 Fetching WsusReportersSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:22 Creating group principals...
2014-10-15 12:23:22 Granting directory permissions...
2014-10-15 12:23:23 Granting permissions on content directory...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Configuring shares...
2014-10-15 12:23:23 Configuring network shares...
2014-10-15 12:23:23 Fetching content directory...
2014-10-15 12:23:23 Fetching ContentDir from registry store
2014-10-15 12:23:23 Value is C:\WSUS
2014-10-15 12:23:23 Fetching WSUS admin SID...
2014-10-15 12:23:23 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:23 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:23 Content directory is local, creating content shares...
2014-10-15 12:23:25 Creating share "UpdateServicesPackages" with path "C:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published
on this WSUS system."
2014-10-15 12:23:25 Creating share...
2014-10-15 12:23:25 Share successfully created
2014-10-15 12:23:25 Creating share "WsusContent" with path "C:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-10-15 12:23:26 Creating share...
2014-10-15 12:23:26 Share successfully created
2014-10-15 12:23:26 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-10-15 12:23:27 Creating share...
2014-10-15 12:23:27 Share successfully created
2014-10-15 12:23:27 Finished creating content shares
2014-10-15 12:23:27 Stopping service WSUSService
2014-10-15 12:23:27 Stopping service W3SVC
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
2014-10-15 12:23:28 Switching database to single user mode...
2014-10-15 12:23:32 Loading install type query...
2014-10-15 12:23:32 DECLARE @currentDBVersion int
DECLARE @scriptMajorVersion int = (9600)
DECLARE @scriptMinorVersion int = (16384)
DECLARE @databaseMajorVersion int
DECLARE @databaseMinorVersion int
DECLARE @databaseBuildNumber nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
IF (@delimiterPosition = 0)
BEGIN
RAISERROR('Invalid schema version number', 16, 1) with nowait
return
END
SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE
BEGIN
IF (@scriptMajorVersion > @databaseMajorVersion OR
(@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
BEGIN
SELECT 2
END
ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
@scriptMinorVersion = @databaseMinorVersion)
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
END
2014-10-15 12:23:32 Install type is: Reinstall
2014-10-15 12:23:32 Creating logins...
2014-10-15 12:23:32 Fetching account info for S-1-5-20
2014-10-15 12:23:32 Found principal
2014-10-15 12:23:32 Found account
2014-10-15 12:23:32 Got binary SID
2014-10-15 12:23:35 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:35 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Fetching account info for S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Found principal
2014-10-15 12:23:35 Found account
2014-10-15 12:23:35 Got binary SID
2014-10-15 12:23:35 Setting content location...
2014-10-15 12:23:35 Fetching ContentDir from registry store
2014-10-15 12:23:35 Value is C:\WSUS
2014-10-15 12:23:40 Swtching DB to multi-user mode......
2014-10-15 12:23:47 Finished setting multi-user mode
2014-10-15 12:23:47 Writing DB settings to registry...
2014-10-15 12:23:47 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-10-15 12:23:47 Starting service W3SVC
2014-10-15 12:23:47 Configuring IIS...
2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The system cannot find the path specified.

2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
Looks like it failed trying to setup the website.
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
This also looks like its a RE-installation of WSUS.
Any chance the "WSUS Administration" v-root is already present and did not get deleted after the last uninstallation?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Server 2012 R2 Essentials - Webpages not working

Similar Messages

Maybe you are looking for