Server 2012 R2 Failing to backup after RAID array rebuilt from failed disk

Event 517, Backup
The backup operation that started at '‎2015‎-‎03‎-‎12T16:02:47.502634500Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Event 8193, VSS
Volume Shadow Copy Service error: Unexpected error calling routine IVssAsrWriterBackup::GetDiskComponents.  hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
Operation:
   OnIdentify event
   Gathering Writer Data
Context:
   Execution Context: ASR Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {ad4681cd-6bde-4216-8099-f87bc9bd3fa6}
H:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
   Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
   Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
   State: [1] Stable
   Last error: No error
Writer name: 'VSS Metadata Store Writer'
   Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
   Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
   State: [1] Stable
   Last error: No error
Writer name: 'Performance Counters Writer'
   Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
   Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
   State: [1] Stable
   Last error: No error
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {e663271b-142e-4b31-b482-0aa9787d0592}
   State: [1] Stable
   Last error: No error
Writer name: 'FRS Writer'
   Writer Id: {d76f5a28-3092-4589-ba48-2958fb88ce29}
   Writer Instance Id: {a9ae34a1-b8e9-422f-9c4f-95e82d4a8316}
   State: [1] Stable
   Last error: No error
Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {52aaaefd-7558-4b43-8099-0cbc17667796}
   State: [1] Stable
   Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {8cfcc545-ae5f-4a60-9281-506e12d1e3ab}
   State: [1] Stable
   Last error: No error
Writer name: 'MSSearch Service Writer'
   Writer Id: {cd3f2362-8bef-46c7-9181-d62844cdc0b2}
   Writer Instance Id: {115398ba-3221-4c50-bbfd-b5cd46df8aa1}
   State: [1] Stable
   Last error: No error
Writer name: 'Dhcp Jet Writer'
   Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
   Writer Instance Id: {63e08199-36f9-419b-a014-185a7c07aa39}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {8c0e5c18-65a3-42d3-bd77-051bb960c3f0}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {ca46429e-b8ba-4ebb-95c4-2b1d4bf8b293}
   State: [1] Stable
   Last error: No error
Writer name: 'WINS Jet Writer'
   Writer Id: {f08c1483-8407-4a26-8c26-6c267a629741}
   Writer Instance Id: {a41d4bc1-4c5e-4cbe-b5a5-e240802abd4b}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {6136948e-f819-46f7-885d-cf51d7d58f81}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {2589e581-7557-417a-b574-b7f8122cf9a6}
   State: [1] Stable
   Last error: No error
Writer name: 'NTDS'
   Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
   Writer Instance Id: {b23bc0a3-8194-4156-a7ce-1f07b9bab864}
   State: [1] Stable
   Last error: No error
H:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Provider name: 'Microsoft File Share Shadow Copy provider'
   Provider type: Fileshare
   Provider Id: {89300202-3cec-4981-9171-19f59559e0f2}
   Version: 1.0.0.1
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
   Provider type: System
   Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7

Found some more errors
Log Name:      Application
Source:        VSS
Date:          3/13/2015 11:05:27 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Server2.newage.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine IVssAsrWriterBackup::GetDiskComponents.  hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
Operation:
   OnIdentify event
   Gathering Writer Data
Context:
   Execution Context: ASR Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">8193</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-13T16:05:27.000000000Z" />
    <EventRecordID>9270</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Server2.newage.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>IVssAsrWriterBackup::GetDiskComponents</Data>
    <Data>0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
</Data>
    <Data>
Operation:
   OnIdentify event
   Gathering Writer Data
Context:
   Execution Context: ASR Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}</Data>
    <Binary>2D20436F64653A20575254415352574330303030303234332D2043616C6C3A20575254415352574330303030303138332D205049443A202030303030333238302D205449443A202030303030353636302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
  </EventData>
</Event>
Log Name:      Application
Source:        VSS
Date:          3/13/2015 11:05:34 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Server2.newage.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine IVssAsrWriterBackup::GetDiskComponents.  hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
Operation:
   OnIdentify event
   Gathering Writer Data
Context:
   Execution Context: ASR Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">8193</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-13T16:05:34.000000000Z" />
    <EventRecordID>9271</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Server2.newage.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>IVssAsrWriterBackup::GetDiskComponents</Data>
    <Data>0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
</Data>
    <Data>
Operation:
   OnIdentify event
   Gathering Writer Data
Context:
   Execution Context: ASR Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}</Data>
    <Binary>2D20436F64653A20575254415352574330303030303234332D2043616C6C3A20575254415352574330303030303138332D205049443A202030303030333238302D205449443A202030303030313130342D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
  </EventData>
</Event>
Log Name:      Application
Source:        VSS
Date:          3/13/2015 11:05:41 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Server2.newage.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine Check OnIdentifyError.  hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
Operation:
   PrepareForBackup event
Context:
   Execution Context: ASR Writer
   Execution Context: Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Error-specific details:
   ASR Writer: A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">8193</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-13T16:05:41.000000000Z" />
    <EventRecordID>9272</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Server2.newage.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Check OnIdentifyError</Data>
    <Data>0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
</Data>
    <Data>
Operation:
   PrepareForBackup event
Context:
   Execution Context: ASR Writer
   Execution Context: Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Error-specific details:
   ASR Writer: A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)</Data>
    <Binary>2D20436F64653A20575254415352574330303030303430312D2043616C6C3A20575254415352574330303030303336362D205049443A202030303030333238302D205449443A202030303030353630342D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
  </EventData>
</Event>
Log Name:      Application
Source:        VSS
Date:          3/13/2015 11:05:41 AM
Event ID:      12290
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      Server2.newage.local
Description:
Volume Shadow Copy Service warning: ASR writer Error 0x80042302.  hr = 0x00000000, The operation completed successfully.
Operation:
   PrepareForBackup event
Context:
   Execution Context: ASR Writer
   Execution Context: Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Error-specific details:
   ASR Writer: A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">12290</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-13T16:05:41.000000000Z" />
    <EventRecordID>9273</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Server2.newage.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>ASR writer Error 0x80042302</Data>
    <Data>0x00000000, The operation completed successfully.
</Data>
    <Data>
Operation:
   PrepareForBackup event
Context:
   Execution Context: ASR Writer
   Execution Context: Writer
   Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Name: ASR Writer
   Writer Instance ID: {a10a986c-04d6-4967-94fe-e955e938a50f}
Error-specific details:
   ASR Writer: A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)</Data>
    <Binary>2D20436F64653A20575254415352574330303030303530372D2043616C6C3A20575254415352574330303030303632372D205049443A202030303030333238302D205449443A202030303030353630342D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
  </EventData>
</Event>
Log Name:      Application
Source:        SPP
Date:          3/13/2015 11:05:41 AM
Event ID:      16387
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Server2.newage.local
Description:
Writer ASR Writer experienced some error during snapshot creation.  More info: A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="SPP" />
    <EventID Qualifiers="0">16387</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-13T16:05:41.000000000Z" />
    <EventRecordID>9274</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Server2.newage.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>ASR Writer</Data>
    <Data>A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)</Data>
    <Data>The writer experienced a non-transient error.  If the backup process is retried, the error is likely to reoccur. (0x800423F4)</Data>
    <Data>A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. (0x80042302)</Data>
    <Binary>01000000B8120000991200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
  </EventData>
</Event>

Similar Messages

  • IWork is not working on Yosemite after a fresh install from the disk

    Hi,
    I've freshly install yosemite on my computer.
    I first reinstalled my computer with original Snow Leopard and then made the upgrade to Yosemite.
    After that I used the Migration Assistant to transfert my old applications.
    Most of them are now running perfectly but I'm still facing issues with iWork.
    It refuses to launch with a message error saying that "Pages" for example is not working with this version of Mac OS and I should make al available update.
    There are indeed updates available from the App store but I can't download them because it is not available for my apple ID because someone else bought it or I cancelled the buying ?!
    It's strange because I bought it with my Macbook Pro in 2010 and even after a fresh install from the disk, the message is still the same...
    Any idea how to unlock these updates?

    Actually this doesn't explain everything.
    I finally reinstalled Snow Leopard / iWork 09' and then upgraded to Yosemite and everything is working like a charm.
    This issue has something to do with the use of the "Application migration tool" from Mac Os X Yosemite to collect old applications to the new os from another installation...
    I solved my issue this way because I don't have very valuable applications that I want to transfert but for other users, this could be a real issue...
    Thanks a lot for your answer

  • DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

    Hi,
    I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
    I get the following errors in the eventlog.
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 18014
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>18014</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>411</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4248" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    </VmlEventLog>
    </UserData>
    </Event>
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 18012
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>18012</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>412</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4248" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    </VmlEventLog>
    </UserData>
    </Event>
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 10150
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>10150</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>413</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4280" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    <Parameter0>%%2147943568</Parameter0>
    <Parameter1>0x80070490</Parameter1>
    </VmlEventLog>
    </UserData>
    </Event>
    What I have done to try to troubleshoot this issue is:
    Reinstalled DPM - No sucess
    Restarted the Hyper-v Host - No sucess
    I'm at the point where I am out of ideas and google hasn't given me much.
    /Joseph

    i have the same error.
    "vssadmin list writers" shows last error unknown for all writers
    disk space is sufficient
    ntbackup of systemdrive and systemstate runs fine.
    i installed KB940349 which fixes some vss related issues but the problem is still there.
    any ideas?
    Thanks.
    When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
    is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
    /Joseph

  • Windows Server 2012 Standard Scheduling for backup for multiple disk

    Hi,
    Iam using Windows Server 2012 Standard,
    How to create backup schedule for multiple hard disk. 1. I have scheduled a multiple backup for disk1, disk2 but the backup fails.
    How to create different backup schedule for single Hard disk.
    Please help

    Hi
     Check these artciles,same on 2012 r2 standard;
    https://technet.microsoft.com/en-us/library/cc754054.aspx?f=255&MSPPError=-2147217396
    https://technet.microsoft.com/en-us/library/dd834883.aspx

  • Server 2012 R2 Network Teaming Issues After Adding WOW64 Feature

    Recently I have had a specific issue adding the WOW64 feature to an active Server 2012 R2 server in core mode (no management).  The server had two active virtual machines.  A server 2008 R2 in version 1 mode and a 2012 R2 in version 2.  
    All were up2date as of April 10 2015.  This was a domain connected core with domain connected virtual machines.  We are the domain administrator.
    After using powershell to install WOW64 and issuing a restart we lost all external network connectivity to the server once the server came back up.  From the console we could ping 127.0.0.1 and all the network addresses of each VM but not the
    default gateway or any address on the local network.  We tried several resolutions including disabling all firewall rules and assigning a known VLAN but nothing worked.  Something went completely haywire within Windows 2012 R2 and network teaming
    and the virtual switch that supplies the VM's with communication.
    What we had to do was remove one of the physical network adapters from the team using powershell from the core console.  We then assigned an address to the nic and whallah we were able to remotely communicate to the server again but the problem
    still remained with communicating to the team.   
    After hours of trials we finally stumbled on a solution deleting the hyper-v virtual switch though a remote console, then the team through powershell.  This of course broke all the hyper-v VM's.  We said f'it and rebooted. 
    This is the magical combination apparently
    We then recreated the team using the remote management GRAPHICAL widget using every physical EXCEPT the nic we were communicating to.   Then we recreated the hyper-v virtual switch remotely again with the GRAPHICAL widget and assigned
    it an address using the command line sconfig tool.   We then went into the GRAPHICAL hyper-v manager and assigned all VM's to the new virtual switch.  WOW everything works again
    Let me just say here in this post that the lack of graphical management in CORE mode is a complete nightmare.  The fact we have to use some graphical tools to perform certain tasks and the command line for others is just silly.  The sconfig.exe
    tool should have built-in teaming commands as inexperienced remote administrators are very difficult to work with over the phone trying to explain spelling of the upper/lowercase commands. 
    This post is more informative than really asking a specific question but if I were to ask one I'd ask, why did installing the WOW64 feature and rebooting break the external communication of the team and the virtual switch?

    Hi gettnmorebetter,
    Could you try to confirm whether you have in the following situation, if you do not found the related symptom please try to install the latest update then monitor the issue
    again.
    Event ID 106 when a Hyper-V virtual switch is bound to an LBFO team
    https://support.microsoft.com/en-us/kb/2974384
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • New Windows Server 2012 install won't boot after installing Hyper-V role.

    I have just installed Windows Server 2012 onto a Dell PowerEdge R310.  Everything worked okay until I installed the Hyper-V role.  After that, when it tries to boot, I get "Your PC ran into a problem and needs to restart. We're just collecting
    some error info, and then we'll restart for you. (0% complete)" for a split second, then the system reboots into Automatic Repair mode.
    In Automatic Repair mode, my options are Refresh your system (which tells me the drive that Windows is on is locked), Reset your system (which tells me there is no partition), and Automatically Fix your PC (which tells me it can't fix it).
    I have updated to the latest version of the BIOS (1.11.0, which Dell states adds Windows Server 2012 support).
    I'm at a loss.. I've tried everything I can think of.  Has anyone run into this issue and figured out a solution?  The only references I can find to this issue talk about Gigabyte motherboards with USB 3.0, but this server pre-dates USB 3.0 by
    quite a bit.

    Hi,
    Not only the BIOS but the iDRAC and storage part also need to ne up date check, have a look at the following list to see what you need for Server 2012:
    http://en.community.dell.com/techcenter/os-applications/w/wiki/3868.dell-bios-support-for-windows-server-2012.aspx
    If any info was collected during the error then have a look in the event viewer or look for a kernel/memory dump file so you can try to find the issue, in many cases a driver, anti-virus sofware or 3rd part service can cause these kind of issues.
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
    MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam

  • Installing Server 2012 on PowerEdge T110 II in Raid Mode

    I am trying to install Windows Server 2012 on a PowerEdge T110 II that I just purchased.  No software and driver utility disks came with the computer!  When I try to install Windows straight from the OS Install disk it tells me that some drivers are missing however it does not list any specific ones missing to know what is lacking!  The message reads: "A media driver your computer needs is missing.  This could be a DVD, USB or hard drive disk driver.  If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now...." 
    I read in your Microsoft Windows Server 2012_Installation Instructions User's Guide_en-us document that I needed OpenManage 7.2 which supports installing Windows Server 2012 OS.  I got the ISO of OpenManage 7.2.0 A01 from your website and burned it to a DVD.  I started the computer with this DVD and was able to get to Dell Systems Build and Update Utility.  From there I went to Configure Against Server OS Installation.  It provides a list of supported OS.  Windows server 2008 and 2011 are listed but not 2012!
    When I go into the BIOS (PERC S100, version 2.2.3) and change the SATA settings to ATA and run OpenManage and go to Dell Systems Build and Update Utility and  Configure Against Server, this time Windows Server 2012 shows up and I'm able to proceed further until it gets to 100% complete and reboots.  I insert Server 2012 install DVD during reboot and it states "Valid Operating system installation media was found.  Press "OK" to start install."  A system Build and Update Utility message appears that states: "The Temporary Partition will be removed.  If an error is encountered during the operating system install, you will need to use the Systems Build and Update Utility to restart the install process."  I press OK and get an Install Windows message that states: "The file "autorun.dll" could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1]"  I burned the OS DVD from a Microsoft ISO.  I have read that perhaps the DVD needs to be burned differently and at a slower speed.  That may resolve this last issue (don't know yet), but I actually would like to setup this computer in RAID mode anyway and first I need to resolve the following question:
    1) Is it even possible to install Windows Server 2012 with Raid Configuration on this hardware?  If yes, how?  The OpenManage-->Dell Systems Build and Update Utility-->Configure Against Server does not list Server 2012 unless the SATA setting is not set to RAID!!!
    2) When I configure the same computer with Server 2012 as the Operating System installed on Dell.com's Configure and Buy site, it gives a configuration error that says "Errors: Microsoft 2012 options selected from Operating System require Microsoft 2012 Media." When I pick/check "Windows Server® 2012, Foundation Edition, Media Kit" the error goes away.  Do I need this media kit?  Is this what is causing the issue with the install?  And where do I get this missing component?
    Any guidance you can give me or reference to appropriate material/docs to help out would be greatly appreciates as I have spent/wasted several days trying to get this server's OS installed!  Thank you.

    The T110 II is almost two years old, so yes, compared to the 12G systems, it is using older hardware (I suspect the T110 II's replacement is due out soon).  The S100/S110 is a special implementation of Intel's onboard RAID, so the S110 is not an option on the older boards that have the S100.
    ftp.dell.com/.../DELL_MULTI-DEVICE_A05_R294489.exe
    Good luck.

  • Server 2012 Scheduled tasks not running after DST

    Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running.  The schedule show the correct next run time, but the task never runs.  The server correctly adjusted for the DST changes (We are in CST in
    the US) and if you look in the date time it notified us that the clock was set forward.
    Any ideas?

    Hi Mark,
    Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
    did some daily scheduled tasks run smoothly?
    Based on current situation, please create a new weekly
    scheduled task and check if encounters the same issue.
    If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
    or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
    Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
    check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
    In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
    scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
    By the way, there is a similar thread. Please refer to.
    Certain scheduled tasks do not run anymore after DST change
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
    Hope this helps.
    Best regards,
    Justin Gu

  • Server 2012 R2 tiered storage, is hardware RAID forbidden?

    Hi,
    I am building a new server for customer. We have total of 7 pcs 1TB HDD and 2pcs of 240GB SSD.
    Before 2012 R2 version I usually built:
    2 pcs HDD 1TB RAID1 for HOST (OS)
    4 pcs HDD 2TB RAID10 for "slow IO" virtual disks (AD, fileshares, etc.)
    2 pcs SSD 200GB RAID1 for "high IO" virtual disks (SQL server etc.)
    1 pc HDD 1TB HOT SPARE for HDDs
    Using R2 tiered storage I would build:
    2 pcs HDD 1TB RAID1 HOST (OS), still using HW RAID as I need to boot from this.
    2.2GB storage spaces LUN (2 way parity) which is created from:
    2 pcs SSD 200GB (FAST tier)
    4 pcs HDD 1TB (STANDARD tier)
    1 HDD 1TB (SPARE?)
    Now with R2 fast tier feature I can leverage the SSDs better but I lose hotspare for HW RAID1 (not a huge issue but still a minus)
     I am also worried about the notification & detection of failures within storage spaces LUN. With HW RAID the controller takes care of checking the individual drives and smart status (predictive failures). Also notification is easy
    to arrange (email etc.). Are there any similar methods in R2 at OS level? Of course if one drive drops out OS will detect that and notification is possible (somehow I assume). But what about checking smart status etc.?
    I thought also about the following configuration:
    2 pcs HDD 1TB RAID1 HOST (OS), HW RAID
    2.2GB storage spaces LUN (no parity) which is created from:
    SSD 200GB (FAST tier, actually 2 pcs HW RAID1), looks like single disk
    HDD 2TB (STANDARD tier, actually 4 pcs HW RAID10), looks like single disk
    OS would think that this LUN is not protected but under the hood disk failures and checkups would be handled by the HW RAID controller in usual manner. And 1TB hot spare would span the 1TB R1 (HOST) + 2TB R10 ("slow" virtual
    disk space). I wonder what could go wrong with this setup :-) I believe this is not supported setup?
    I look forward to any opinions if you had the stamina read all this.
    BR,
    Markku

    Hi Markku,
    To check smart status, you can start a Windows powershell in
    Server 2012 R2, run the cmdlet Get-PhysicalDisk –FriendlyName PhysicalDisk1 | Get-StorageReliabilityCounter
    in powershell, which can get the relevant property of the PhysicalDisk1 like the temperature, experienced any sort of read or write failures etc.
    For more detailed information of Get-StorageReliabilityCounter, please check this article:
    Determining disk health using Windows PowerShell on Windows Server 2012 and Windows 8:
    http://blogs.msdn.com/b/san/archive/2012/09/26/determining-disk-health-using-windows-powershell.aspx
    In addition, To get information of your storage pool and disk, you can start with these cmdlets in powershell:
    http://technet.microsoft.com/en-us/library/hh848705.aspx
    I hope this helps.

  • Server 2012 not visable in AD after IP change

    Running a single server 2012 in this environment so it hosts everything such as AD, DHCP, DNS etc.
    I changed the network IP scope due to VPN issues for users who connect from home networks using the same IP range.  During the IP range change I changed the servers own static IP addresses, reconfigured DHCP scope and reservations and the DNS server.
    Everything in the network is working properly expect that this single server does not show up for clients looking in their Network list of computers.
    I've missed something in the process but not sure what that something is. Any ideas how to get the server to reappear?
    Thanks

    Under the "Everything in the network is working properly" heading, I presume this means dns resolution is functional, users are being authenticated, able to release/renew ip addresses, etc.  I hear you saying it's just the browsing issue.
    Network Discovery in my experience is based on broadcast traffic and therefore less reliable than, for example, the DNS table.  So there are a few angles here.
    -It's conceivable that through time and a refreshing of the caches both on the networking equipment and at the clients that this will pick back up for you.
    -You might consider refreshing or rebooting the router so that it repopulates it's tables and the aforementioned cache can be ruled out.
    -I suggest picking a client to test from.  Restart and see if it picks back up. a difference. Map a drive or browse the UNC path of a share from the Run line and see if the server then populates. 
    These are just some suggestions to get you started. Let me know what shakes out, as there are certainly many more things to try based on what you're seeing.  Hope this helps.

  • Server 2012-logging out idle users after x time

    Hi Guys,
    I cant seem to find anything that's working for this & my boss is riding me for this.
    I need to set up a rule in Win Server 2012 R2 that will logout users who are Idle for 30 mins, I cant get it through GPO so  hoping for any solutions? its been 2 days, please help?

    > I need to set up a rule in Win Server 2012 R2 that will logout users who
    > are Idle for 30 mins, I cant get it through GPO so  hoping for any
    > solutions? its been 2 days, please help?
    RDS or local logon?
    If RDS: Check what you see in  Computer Configuration\Administrative
    Templates\Windows Components\Remote Desktop Services\Remote Desktop
    Session Host\Session Time Limits\
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

    We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
    lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
    We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
    The 3 for guests are not configured to allow host OS sharing.
    We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
    We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
    We do not have Jumbo frames enabled because of some issues with switching compatability.
    I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
    Any thoughts of where I might look to help diagnose this issue?

    Hi ,
    "1 connected to its own NIC. 1 for management and the 3 others for guests."
    Also you mentioned that : " is only hosting these 24 VMs ".
    First please try to disable the RSS in the property of the NICs for guests .
    Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues"  (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
    the host and a default queue) .
    If I understand correctly ,when you enable VMQ  the number of connected VMs on that NIC should not be more than the value of  "NumberOfReceiveQueues" -2 .
    For details please refer to following link:
    http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
    Hope this helps
    Best Regards
    Elton Ji
    If it is not the answer please unmark it to continue
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server 2012 Datacenter - local IIS site opens locally but not from PCs on the domain

    This is my first multi-server domain server install on an existing domain. I have a new Server 2012 installed on our domain. This server will host an intranet site, not public facing. I managed to install IIS and have a working ASP/.Net site. I can open
    the site while on the server. However, the server denies access to the site from PCs on this domain. I tried changing the security options for the site directory but I can't find the issue.
    The directory security objects allowed include:
    MYSERVER\IIS_IUSRS
    But, "MYSERVER" does not acknowledge the security object:
    MYDOMAIN\IIS_IUSRS
    What settings have I missed? The default site on port 80 is working locally and from the domain. My site is on port 8080 and is not located under the c:\inetpub folder, where the working default site is located.
    Thanks in advance,
    Kurt

    Update:
    I installed SQL Express 2012 and Management Studio 2012 locally on "MYSERVER". Again, I can attach to my instance of SQL locally from this server but using SSMS2012 from my PC on the domain, the SQL instance is not found. This must be related to
    the above issue.

  • TS1550 Time Machine fails to backup after I've repartitioned the external drive

    Just got this new iMac running OS X version 10.8.4 and can't get Time Machine to complete the back up... It is extremely slow... makes me think of the Windows environment I'm trying to escape from... and then after several hours (only achieving about 200MB back up) I get a message that the back up failed.
    I've repartitioned the 1T HP drive several times to the Mac OS as advised by the Apple on-line advisory, and have run rhe Disk utility repair function... but still can't get it to work.
    ? suggestions

    Hi, I never use TM, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • Windows Server 2012 R2 boots in CMD after several Restarts

    Hi,
    I have been facing this problem after i installed some applications on the server and after we did several restarts the server boots up only in cmd.
     I am very sure that i installed the OS with GUI since i have logged in with it while i am installing the application.

    If you are not in Safe Mode, then you are using Server Core. 
    As mentined earlier, see
    http://blogs.technet.com/b/yungchou/archive/2014/01/16/windows_2d00_server_2d00_2012_2d00_r2_2d00_installation_2d00_options_2d00_and_2d00_features_2d00_on_2d00_demand_2d00_part_2d00_4_2d00_of_2d00_5.aspx

Maybe you are looking for

  • Prevent scaling of leaf nodes

    I am trying to implement a simple map solution in JavaFX 2.0. I have map object in a given resolution and some "car" objects (for example Rectangle) that I would like to overlay the map. My intention is to create a Group node containing the map objec

  • SAP Business One Best-Practice System Setup and Sizing

    <b>SAP Business One Best-Practice System Setup and Sizing</b> Get recommendations from SAP and hardware specialists on system setup and sizing SAP Business One is a single, affordable, and easy-to-implement solution that integrates the entire busines

  • Install SOA Suite failed

    hello when i install SOA Suite10.1.3.1.0 in my windows XP, Configuration Assistant "Oracle Web Services Manager Configuration Assistant" failed, the following is the log: install.configApps.setUpLogging: [copy] Copying 1 file to D:\Oracle\10.1.3.1\Or

  • Honour space in Program Files folder

    Hi, I am upgrading my APEX to version 3 on my local machine. I have previously done this successfully on my OS = XP ... <br><br> SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 28 11:49:37 2008 Copyright (c) 1982, 2005, Oracle. All rights reserv

  • Buying a new computer and want to also get Adobe Premier Elements 9 to video edit.

    Buying a new computer and want to also get Adobe Premier Elements 9 to video edit. What cpu/ram/video card etc do I need to get to ensure good performance from software eg when rendering etc.