Server 2012 R2 Hyper-v Servers not being discovered by the mp

Sorry if this is a dup question. I did see the one for 2008 but that didn't fix my issue.
I have 4 hyper-v servers running server 2012 r2 in a cluster. I have scom 2012 r2 and it detects the cluster and 3 out of the 4 hyper-v servers. the 4th server it can see under windows but does not discover the hyper-v components.
Any assistance would be appreciated.

Hi,
You can install the Agent on the server manually to check the result.
http://technet.microsoft.com/en-us/library/hh212853.aspx
Niki Han
TechNet Community Support

Similar Messages

  • Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

    I have racked my brain and done everything that I know to do for about two weeks now.  I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
    profiles.  It keeps telling me that the roaming profile could not be loaded because of a slow connection.  These are workstations that are connected directly to the switch that the DC is connected to.  I have tried multiple connections regarding
    the layout (DC into the router, router into the switch).  The router is a Cisco RV220W.  I have two VLANS, one for public and one for private domain.  The Private VLAN has DHCP turned off since I am providing it through the DC.  I currently
    have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
    The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port).  I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller.  The DC can see
    the internet fine and the workstations can connect to the shared folders on the server.  I can retrieve files by just using the computer name or FQDN.  The DC is also running DNS and DHCP.  The DNS has the _msdcs setup from when I installed
    the active directory role.  I have attempted to assign static IP addresses to the workstations:
    IP:                     10.0.0.80
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:        10.0.0.12
    I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
    The server is assigned:
    IP:                     10.0.0.12
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:         10.0.0.12
    The DNS entries have forwarders that forward to my ISP DNS servers for lookup
    I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
    I've lost my patience with this project and am sinking fast.  Can someone please offer some advice as to what I've done wrong?  I've created this exact scenario at work many times but, I've never done it with Windows Server 2012.  Is this
    possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV?  I am going to attempt to work on it some more tomorrow when I get over there.  I think there may be an issue with the SR-IOV not being enabled on the machine
    through the Dell Bios.  Would the SR-IOV really cause the workstations to report a slow connection?  When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct.  I don't
    have "ignore slow connections" or any of those GPO's set.  I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem.  Any help that someone can offer, I am more than willing
    to listen.  If you need more information, please ask.
    Thanks,
    Jay

    So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
    post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
    virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
    Im disappointed in MS right now.

  • (Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

    Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server.   (This
    will be for a brand new network setup, new forest, domain, etc.)
    Specifically, your best practices regarding:
    the sizing of non virtual and virtual volumes/partitions/drives,  
    the use of sysvol, logs, & data volumes/drives on hosts & guests,
    RAID levels for the host and the guest(s),  
    IDE vs SCSI and drivers both non virtual and virtual and the booting there of,  
    disk caching settings on both host and guests.  
    Thanks so much for any information you can share.

    A bit of non essential additional info:
    We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
    over to the new infrastructure .   We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
    During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
    information regarding virtualizing the DCs, which as been a bit inconsistent.
    Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
    seen all that much on Srvr2012 r2.
    We have read these and others:
    Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100), 
    Virtualized Domain Controller Technical Reference (Level 300),
    Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
    Support for using Hyper-V Replica for virtualized domain controllers.
    Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
    Chas.

  • Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

    We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
    lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
    We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
    The 3 for guests are not configured to allow host OS sharing.
    We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
    We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
    We do not have Jumbo frames enabled because of some issues with switching compatability.
    I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
    Any thoughts of where I might look to help diagnose this issue?

    Hi ,
    "1 connected to its own NIC. 1 for management and the 3 others for guests."
    Also you mentioned that : " is only hosting these 24 VMs ".
    First please try to disable the RSS in the property of the NICs for guests .
    Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues"  (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
    the host and a default queue) .
    If I understand correctly ,when you enable VMQ  the number of connected VMs on that NIC should not be more than the value of  "NumberOfReceiveQueues" -2 .
    For details please refer to following link:
    http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
    Hope this helps
    Best Regards
    Elton Ji
    If it is not the answer please unmark it to continue
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

    I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
    The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
    I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
    Tim

    Sorry Tim, is that all 50 blue screen if live migrated?
    Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
    The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
    Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
    CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Server 2012 r2 Hyper-v guest network speed with 10 GB NIC's

    Hi
    Setting up a Server 2012 r2 Hyper-v host with an onboard 4 port 1 GB nic and a offboard dual port 10 GB nic. We are using the 1gb quad port for management. The 10 Gb we intend using for hyper-v guest use however we don't seem to be able to achieve very high
    speeds though the 10 GB adapter when assigned to a virtual switch. Testing the 10 Gb nic from the host confirms that we can transfer/get 10 GB speeds. When assigned to a virtual switch however the speed drops to about 1-2 Gbps. Has anybody seen anything like
    this ?. We've tried a variety of settings and i can confirm that the network traffic is using the 10 GB nic.

    Hi,
    I am almost certain what you see is by design. I don't want to go into to much detail because I'm in a bit of a hurry. But allow me to explain.
    Suppose you have a 10Gb NIC interface and an multi-core CPU. When you have RSS (Receive-Side Scaling) disabled a single core can normally handing
    around 2.5-4.3Gbps. When you enable RSS the data streams/traffic is spread across multiple cores.
    But RSS is a network optimization feature for the Management OS, not for a vSwitch. Instead you should use VMQ (Virtual Machine Queuing). VMQ is
    the equilavant of RSS, but then intended for VMs. But... there is a difference. VMQ does not spread single data streams/traffic across multiple cores. Instead is (dynamically) assigns each vmNIC its own core. So... you don't use multiple-cores at a time for
    a single vmNIC. You can't use RSS and VMQ at the same time. Keep that in mind.
    But... you can accomplish this by enabling vRSS as well. That's another story.
    If you watch the following video, at the end you know all about VMQ.
    Hyper-V dVMQ
    http://www.hypervrockstar.com/tag/dvmq/
    Boudewijn Plomp | BPMi Infrastructure & Security
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

  • Windows Server 2012 - Printing using UNC path not working

    Hi,
    I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
    app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
    With
    the web app I receive an error "The data area passed to a system call is tool small". 
    Also,
    in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
    from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

    I have contacted IIS forum support.
    Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
    Their final response:
    Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
    works while the Samsung fails, as the HP one just "happens
    to work",
    http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
    Similarly, System.Printing was designed just for WPF.
    About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
    to help you out. This is not a trivial scenario.

  • Materialized view not being used in the report

    I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

    The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
    You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
    Regards
    Abhinav Agarwal
    Oracle Business Intelligence Product Management
    http://www.oracle.com/bi
    http://www.oracle.com/technology/documentation/bi_ee.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
    http://oraclebi.blogspot.com/

  • HT4623 i have i-phone 3gs purchased unlocked from usa 2 years back version 4.1 recently when i upgrade my version using i-tunes to 6.o I can not activate my i-phone , the msg server busy since last week I not understand what is the problem ?

    have i-phone 3gs purchased unlocked from usa 2 years back version 4.1 recently when i upgrade my version using i-tunes to 6.o I can not activate my i-phone , the msg server busy since last week I not understand what is the problem ?

    The 3GS was not sold as an unlocked phone in the US 2 years ago and AT&T did not offer unlocking then.
    You bought a hacked phone. The Apple servers can detect the hack and have now disabled activation. Contact AT&T and find out if you qualify to have it unlocked or buy a new legitimately unlocked phone.

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • Stoarage location is not being reflected in the outbound delivery

    Hi
    I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai  tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery  . Since this storage location is WM managed  hence the WM  status shows that the transfer order is not required .
    When i tried to put manually the storage location  the system  throws an error that this storage location in not maintained in plant R001 .
    Althoght the stoack has been there in the stoarage location with resepct to plant ans also  the matrerial master is also been extended for  this storage  laocation and all the respective views such as WM and Sales hasbeen maintianed .
    Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
    Thnaks and Regards
    RAJ K

    Hi,
    did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
    stor.conditions (table TVKOL)?
    Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
    Regards,
    Ely

  • Product hierarchy  is not being maintained in the sales order material

    Hi,
    I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
    cheers
    Aveek

    Hi,
    Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
    cheers
    Aveek

  • Fieldname in not being displayed in the table maintenance

    Hi Experts,
                     I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
    on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
    everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
    plz help.
    Thanks n Regards,
    Mukesh

    Hello Mukesh,
    As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
    If you are assigning the data element and the field label is empty, then + sign will come. In other case -  if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
    In both the above cases, you can change the column header manually in the layout.
    Regards,
    Selva K.

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

Maybe you are looking for