Server 2012R2 Hyper-V Are the VDI machines of a collection always running

Hello
I got a Windows Server 2012r2 Hyper-V Cluster to run Windows 8.1 Guests on.
If I create the collection with 10 Guests, are these machines always running?
Or can I configure that only two machines are running and always when a user is connecting to a running guest, one more guest is started up to be ready for the next user?
Thanks for your answer,
Juerg

Hi,
Thank you for posting in Windows Server Forum.
In respect to your comment, I can say that you have Hyper-v cluster to run windows machine. As per my knowledge, cluster won’t shut down or power off. If we use PS to shut down our VDI, we need ask the helpdesk to startup our VDI manually, so the VM in VDI
must always running. As all know, there are many servers are running under single cluster, so if one fail, all the application will up on others servers, but the application can close by its admin, cluster cannot control this operation.
Based on my knowledge, for your other comment “one more guest is started up to be ready for the next user?” VDI admin need start up this VDI manually and there is no any option or feature which can ready the VM to be used by other users.
Hope it helps to understand!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Configure Server 2012R2 Hyper-V

Hello,
I have setup server 2012R2 Hyper-V. I have 2TB physical HD and partition the C drive to 300GB and the rest,1.5Tb, for my DATA. 1. How do I use Powershell to initialize the 1.5Tb, format to NTFS and assign drive letter?
I am able to remote into the Hyper-V using remote desktop. When connect to the server using Hyper-V Manager, I got the following error "Operation on computer failed"10.10.10.10".
2. How do I enable the RPC using powershell?
veasna

Hello veasna,
to 2:) is your Server Domain based? If so, then RPC communication should work out of the box. If not then you can use to configure the Client and Server the tool
hvremote. The link contains as proper documentation as well.
to 1:) YOu can connect to the Server and start a local Powershell. Then follow the guidance in this
article.
Hope this helps
Kind Regards
Thomas

BW Precalculation server and BW server can be installed on the same machine

Hi BW Expert
We are evaluating make Precalculated Workbooks and we have a doubt, BW Precalculation server and BW server can be installed on the same machine?
Regards,
Egly

Hi,
It is better to have them on separate systems.
https://websmp201.sap-ag.de/~sapidb/012003146900000085752006E/HowtoInformationBroadcasting.pdf
Please go through the below threads:
BW Pre Calculation server
Information needed about bi pre calculation server
Hope this helps.
Regards
Vishal

Which macs are the most powerful versions that can still run 10.6.8 snow leopard?

which macs are the most powerful versions that can still run 10.6.8 snow leopard?

See this previous discussion:
https://discussions.apple.com/thread/5050319?tstart=0

Support for Windows Server 2012R2 Hyper-V

Windows Server 2012 R2 is officially available from last week. What are the plans for 2012R2 Hyper-V Support on UCS platform /B200M3 servers/? Also Nexus1000V for SCVMM 2012R2?

Hi,
We have Windows Server 2012 R2 (x64) configured as Hyper-V Servers running a Cisco UCS. We use Cisco UCS B200 M3 Blade Servers with a VIC 1240 (including a Port Expander). It works just fine. I have also succesfully tested VM-FEX and SR-IOV.
I must add that there are only 2012 drivers, although they work properly. In case you have a FlexPod and use iSCSI. NetApp does not have a DSM driver (MPIO) to support 2012 R2 yet, so you have to use the Microsoft DSM driver.
I am also waiting for Cisco and NetApp to release updated drivers that officially support Windows Server 2012 R2.
I hope this information is usefull to you. Please let me know if you have any questions.
Boudewijn

DI Server is Not Connected from the Client Machine

Hi all,
There was a problem to connect DI Server.But It runs on the Server Correctly.When we run on the Client Machine to connect the SAP DB, It throws an error: -111.
Code :
        cmp = New SAPbobsCOM.Company
        cmp.Server = "Sap-Server"
        cmp.CompanyDB = "FAST"
        cmp.UserName = "manager"
        cmp.Password = "manager"
        cmp.language = SAPbobsCOM.BoSuppLangs.ln_English
        cmp.UseTrusted = True
        mretcode = cmp.Connect
        If mretcode <> 0 Then
            cmp.GetLastError(merrcode, merrmsg)
            MsgBox(merrmsg)
        Else
            MsgBox("SAP B1 - Data base Connected Successfully!")
        End If
Thanks in Advance
Regards,
Suresh.G

you are not using DI server to connect, your using DI API. Check if your client machine has the DI API installed. If not you can get from the installation cd or the lastest patch installed under packages/DI API folder.

What are the Client machine requirements for running Forms 6i?

What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
Thanks in advance.

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

Different Web Server and JDK Version on the same machine

Dear All,
There's a Orion App Servevr w/ JDK1.3 that running JSP. And I
have installed the IBM websphere 5.0 SP2 w/ JDK 1.5 for another application in the same machine. When I tried to
start the orion using cmd "java -jar orion.jar" for the original application, I encountered error as
follow:
C:\orion>java -jar orion.jar
Exception in thread "main" java.lang.VerifyError: <class: com/evermind/server/ApplicationServer, method: na signature: <Ljava/lang/String;Lcom/evermind/util/ErrorHandler;>Lcom/evermind/server/ Application;> Incompatible object argument for invokespecial
Whats the possible solution? May anyone give a suggestion? Thanks
Regards

try to specify the absolute path for java such as
c:\my_java_JDK1.3\bin\java -jar orion.jar

HT201250 Where are the Time Machine step by step instructions?

I'm looking for the screen shots of how to even start setting up the time machine. I see the instructions for once you get there, but it doesn't do me any good if it can't show me how to start. This should be easy to pull up. This is a Mac. This should be fairly straightforward. Right? So, why no instuctions on how to start Time Machine, its options, settings, and all that?

System Preferences. Time Machine.
System Preferences is something you should know about if you do not. You can access it from the Apple Menu, and it is a default item in the Dock.
I have no idea where there are screen shots.
There's one slider and two buttons. Not really a lot to look at, or be confused by.
The slider says ON and OFF.
One button says "Select Disk"
The other says "Options..."
If you wish to select a disk, choose "Options..."
Just kidding.
There are no "magical options."
For Step by step instructions:
To turn on Time Machine:
1. Slide switch to On.
To turn off Time Machine:
1. Slide switch to Off
To select a disk to use:
1. Click Select Disk.
2. Select a Disk.
To Remove a Disk:
1. Click Select Disk.
2. Select Disk.
3. Click Remove Disk.
To exclude Items:
1. Click Options...
2. Click Add ( + ) button.
3. Select folder to exclude.
4. Click Save.
To remove items from exclusion:
1. Click Options...
2. Select item
3. Click Remove ( - ) button.
4. Click Save.

What are the best plug ins for iMovie 11 running on Lion?

What are the best plug ins for Imovie 11 or Imovie HD running Lion? Especially transitions & effects for still pictures.
Thank you

Hi
For iMovie'08 to 11 - There are no Plug-ins - not supported at all
iMovie HD (in reality HD5) - doesn't work under Mac OS X.7 - at all
iMovie HD6 - can take Plug-ins and run under Mac OS X.7 - BUT some of the Plug-ins doesn't work under X.7
old list on - Plug-ins - Only relevant to iMovie HD6 (May be they are too old)
Stupendous software
www.stupendous-software.com
GeeThree
www.geethree.com
cf/x.
www.imovieplugins.com
Apple
www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
www.imovieplugins.com/fxhome.html
fxStabilizer - for iMovie - Google it
Yours Bengt W

What are the system fonts needed for Lion to run?

I work in a Prepress Department and the only way to properly work with fonts in this enviroment is to have the bare minimum fonts necessary for an OS to run correctly which is usually around 30 or less fonts. Then we use suitcase to load fonts provided by customers and we know for sure we are using the exact fonts used to build the job say in Quark or Indesign. Before moving system fonts from Lion into a disabled folder I was hoping for a list of sysytem fonts that are absolutely needed to run Lion without issues.

Font list from System>Library>Fonts in the Install Lion .dmg:
Fonts
------Apple Braille Outline 6 Dot.ttf
------Apple Braille Outline 8 Dot.ttf
------Apple Braille Pinpoint 6 Dot.ttf
------Apple Braille Pinpoint 8 Dot.ttf
------Apple Braille.ttf
------Apple Color Emoji.ttf
------Apple Symbols.ttf
------AppleGothic.ttf
------AquaKana.ttc
------Courier.dfont
------Geeza Pro Bold.ttf
------Geeza Pro.ttf
------Geneva.dfont
------HelveLTMM
------Helvetica LT MM
------Helvetica.dfont
------HelveticaNeue.dfont
------HelveticaNeueDeskUI.ttc
------Keyboard.ttf
------LastResort.ttf
------LucidaGrande.ttc
------MarkerFelt.ttc
------Menlo.ttc
------Monaco.dfont
------STHeiti Light.ttc
------STHeiti Medium.ttc
------Symbol.ttf
------Thonburi.ttf
------ThonburiBold.ttf
------Times LT MM
------Times.dfont
------TimesLTMM
------ZapfDingbats.ttf
------ヒラギノ明朝 ProN W3.otf
------ヒラギノ明朝 ProN W6.otf
------ヒラギノ角ゴ ProN W3.otf
------ヒラギノ角ゴ ProN W6.otf

What are the minimum IE 11 settings required to run activeX plugin in 64bit Mode?

Tried many different internet options such as advanced->Enhanced protected mode, "security->automatic filtering of ActiveX" "advanced-> 64bit enhanced protected mode (windows 8)", enable many different ActiveX related options
in custom security options.
But 64bit ActiveX on some systems and not working in some other (loads 32bit version). Not sure what is the right approach? Is this depends on IE version. For example in IE11 16428 version it is not working. In IE11 17280 version it is working.
Another observation.
In some system, File->properties option shows "Internet | Protected Mode: On" then only 32bit ActiveX is working. In other systems it shows "Internet | Protected Mode: Enhanced" and 64bit ActiveX is working.
Thank you in advance.

Some are windows 7 and some are windows 8.1.
Does this concern an ActiveX Control (plugin) you've created or are creating?
Yes, ActiveX I have created. Created both 32bit & 64 bit ActiveX & registered.
Does the second line of text in IE Help | About read Update
Versions: 11.0.13 (KB3003057) on allcomputers?
There are some differences in versions. One system it is 11.0.14(KB3003057). It is working in this system, Only setting in Advanced tab is sufficient. Need to have Mark
of the Web (MOTW)
tag in the local html file.
In another system same version IE is is not working.
Another windows 8.1 system IE version 11.0.9600.17207 (11.0.10 (KB2962872)) is not working. It shows a popup with "If
you trust this site, you can disable Enhanced Protected Mode
for this site to run the control" message.

Certificate validation when server is the same machine as client

Hi guys i realize this is the most talked question about jsse, the validation of local certificates.
I found a 2001 o'reilly page where they explain what is jsse and gives a complete tutorial of it.
It comes with a sample secure http server and browser, and when i try to connect to the server with that browser it bombs out with the "couldn't find trusted certificate"
Having read some posts here and googled around i found out that this sometimes happens because the name on the signed certificate does not match the url accessed from the server.
So, if the server and client is on the same machine (127.0.0.1) and my machine name is FJL, can someone explain me how should i run the keytool?
This is what i have been using:
keytool -genkey -keystore certs -keyalg rsa -alias espectro -storepass serverkspw -keypass serverpw
The keytool then prompted me for information to put into the certificate. My answers are shown in bold.
What is your first and last name?
��[Unknown]: francisco leon
What is the name of your organizational unit?
��[Unknown]: licom
What is the name of your organization?
��[Unknown]: la universidad del zulia
What is the name of your City or Locality?
��[Unknown]: maracaibo
What is the name of your State or Province?
��[Unknown]: zulia
What is the two-letter country code for this unit?
��[Unknown]: VE
Is <CN=francisco leon, OU=licom O=la universidad del zulia L=maracaibo ST=zulia, C=ve> correct?
��[no]: y
the web server is found here http://www.onjava.com/pub/a/onjava/2001/05/03/java_security.html?page=1 to page=5 or so
page=4 explains something:
You may wonder what happens when you run SecureBrowser againstSecureServer. It doesn't work. That's because SecureBrowser won't acceptSecureServer's phony certificate. However, we can trick SecureBrowser into accepting SecureServer's certificate. Here's how:
So i use the keytool again to do what it is suggested:
keytool -export -keystore certs -alias espectro -file server.cer
then:
keytool -import -keystore jssecacerts -alias espectro -file server.cer
the jssecacerts file is located on the dir where i did the keytool thing, so i copy it to c:\j2sdk1.4.1_02\jre\lib\security
and finally i try to connect to the secure httpserver found on that url with the secure browser found there too and i get the "couldn't find trusted certificate"
could someone please explain me how to fix it? the article is kind of old and lists some properties which i haven't been able to find, along with some .jar (the article is dated before java 1.4 was available) and maybe i am doing something wrong.
Thanks in advance!

Ok, indeed, when keytool asks me about my name, i tried it with my machine name and now it works.

Unable to Enable User Profile Disks in RDP server 2012R2

I am setting up a new Windows server that will act as an RDP server. The server has been built with Windows Server 2012R2.
I have the following roles and services working on the server: RD Web Access, RD Gateway, RD Licencing (with 30 user cal licences), the RD Connection broker, and the RD session host.
I have a SSL certificate configured and installed on the site, and both external and internal DNS are configured and working.
I have created and published an application collection and this is working. That is, when you go to https://remote.<servername>.org you are presented with a log in screen, users can log in with their domain accounts and then can connect to the published
applications, this is working both on our internal network and from the general internet.
So all the roles on the server are working and the collection itself is also working. However, what I cannot do is set it up so that we can use user profile disks with that collection. When I go through the Session Collection Wizard and I get to "User
Profile Disks" I can click on "Enable user profile disks" and then you can enter the options below.
I am entering the share location under location \\<servername>\<sharename>
I am using the default "store all user settings and data on the user profile disk"
Then I go to create the profile disks and I get the following error:
"Could not create the template VHD. Error Message: -2147024809
This has happened multiple times, I have done the following:
- installed all windows updates and rebooted the server, same error
- checked the share permissions AND the folder permission for that share, for testing purposes I have set permissions on both the folder and the share to allow full control to "everyone" (I also tried it with only "domain users") but
same error message.
- I have checked to see that no quotas are imposed on the disk where I am attempting to create the profile disks - this was because this was the closest thing I could find on Technet was this post:
https://social.technet.microsoft.com/Forums/windowsserver/ru-RU/aec30527-d742-42b9-950e-85c709c4cb45/vdi-problem-creating-user-profile-disks?forum=winserverhyperv
And that was a quota issue that I am not having.
The UPD wizard says the following "the servers in the collection must have full control permission on the user profile disk share and the current user must be a member of the local Administrators group on that server"
Both of those things are true.
I have attempted to search for that specific error message (-2147024809) and have found nothing on Technet or any other site.
I am hoping someone here has some thoughts. Thanks in advance.

I was looking at both the technet article for setting up UPD as well as this walk-through:
http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
where 'everyone' has full permissions on both the share and the folder.
I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
in all cases.
I also found this Technet article:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue?

Exchange server 2010 mailbox role memory 100% - Virtual machine

Dear All
Please i need your help to accomplish this work.
we are using two mailbox servers and two hab/cas servers and around 2000 users are using mailbox in my organization.
Each mailbox server roles having 16GB RAM.
all the exchange server running on virtaul machine. until last week we didn't experience any problem. since last week memory and cpu consuming 100% in one of mailbox server.
i checked what are the process running while consuming 100% but couldn't found any fishy process.
Parthiban selvaraj

Hi parthibanselvaraj,
The behavior you see on the mailbox servers for store.exe is completely normal. This is in order to allocate as much data in memory address space as possible, so that each user experience great performance in their Outlook clients.
If another process should need the more memory, the Exchange store.exe process will released it as required. This is by design.
By default, the msExchESEParamCacheSizeMax key is not set, which means the store can allocate the memory it needs dynamically. ESE (store.exe) will grow the cache to consume almost all available RAM on the server if there is no other memory pressure on the
system For example, if the server contains 16gb physical memory, if there is no other memory pressure, one could expect that the store.exe process will grow to use up to 14gb memory (16gb minus 2gb allocated to Kernel mode). This much larger database cache
size results in greatly reduced disk I/O, and is preferred anyways, as reading information from memory is much faster than reading information from disk. If memory pressure occurs, as when other applications request/require memory, ESE will appropriately shrink
the size of the database cache. It’s not recommended to modify the msExchESEParamCacheSizeMax attribute of the information store object. Lowering this value may degrade performance, in terms of server performance as well as in terms of end-user experience.
Hope it can be helpful.
Best regards,
Eric

Server 2012R2 Hyper-V Are the VDI machines of a collection always running

Similar Messages

Maybe you are looking for