Server 280R is showing the error can't open PAM library
Hello Guys,
Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
Its very urgent
Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).
Similar Messages
-
Showing error can't open PAM library
Hello Guys,
Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
Its urgentTry searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).
-
I recently had to replace my harddrive a few months back and tried to open my iWeb to update my website. When I click to open it, I get "Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.” I uploaded iLife again but that didn't seem to help.
Did you confirm that you have a Domain.sites2 file in your Users/Home/Library/Application Support/iWeb folder? If so double click on it to try to open with iWeb. If that doesn't work try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home()/Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = kull )
my database name is kull
please somebody helpBiswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database". I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias lsn
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JUL-2013 19:08:06
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor -
Hi guys,
I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
Does anyone meet the issue?
WilliamHi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hi,
I have just upgrade the creative cloud CC version and upgrade the acrobat pro to XI version.
when I convert a pdf file to word format, it show the error "Save As failed to process this document. No file was created."
Actually, I have delete the image, use other pdf file and download a sample pdf file to test it. Same error is shown. I have try all the other format , like the excel, rtf, text, powerpoint, still same thing happen.
Please show me what else I can do to fix this problem.
Thx.
Alfred Lialfredadli wrote:
Please show me what else I can do to fix this problem.
Fisrt step would be to ask in the proper forum.
http://forums.adobe.com/community/acrobat -
why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Hi
safari is not opening some webpage showing the error: /usr/local/cache/files/block.html;400
Please help me.
thanksHey blissfull71,
If you are having issues loading certain webpages in Safar, you may find the information and troubleshooting steps outlined in the following article helpful:
Safari 6/7 (Mavericks): If Safari can’t open a website
Cheers,
- Brenden -
Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
LwandoRead here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue. -
TS3694 i have show the error 1015 while restore the iPhone 3g
i have show the error 1015 while restore the iPhone 3g
The phone was jailbroken. You can't get help here. Discussing jailbroken phones is forbidden by the terms of service.
-
Firefox crashes as soon as Flash video tries to load and Safari shows the error "Plug-in Failure"
I am unable to use Youtube or view Flash video on any sites.
Firefox crashes/quits as soon as a video tries to load and Safari shows the error "Plug-in Failure".
I have uninstalled Flash, downloaded a fresh version and installed, but no joy.
I am using OS X 10.6.6.
This is what I have tried so far;
1. Repaired Permissions.
2. Restarted with external drive and run Disk repair.
3. Restarted with external drive and run DiskWarrior.
4. Completely uninstalled Flash plugin. Robooted. Reinstalled Flash plugin. Rebooted.
5. I even installed an earlier version of the plugin to see if there was some incompatibility with the latest version.
6. Created a new user login and tried from there. Same problem.
Any ideas?You have what is necessary for Flash Player to be working. Firefox had some issues last year but it was after loading a video or the website. I had not heard of it lately and even last year don't recall it happening on the Macs.
What is happening with yours sounds like a direct conflict with some addon/extension.
Here is the link from Firefox describing what happened last year. You might want to see if there is anything more current.
https://support.mozilla.com/en-US/kb/The%20Adobe%20Flash%20plugin%20has%20crashed?s=Firefo x+crashing+browser&as=s
I'll get the Mac troubleshooting guide in a minute and post it also.
Any adblock or popup blocker software would cause this also.
Thanks,
eidnolb -
i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
Hai..
I have disabled block pop up in my iphone 5s.. but still i couldn't connect my mobile with my college wifi.. it shows the error message as "ensure all the pop ups are not blocked"....You might want to talk to the IT dept. at your school to see if they know of a solution.
-
Mac OS 10.7.4, updating new version Microsoft Office 14.2.7, ERROR "The Installer can’t open the package. There may be a problem with file ownership or permissions."
The Apple Installer version is Version 5.0.1 (537).
When I check the Installer Log, I find only these two messages that I do not understand.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Install's runner tool is not properly configured as a setuid tool.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Unable to create InstallController
I changed all the permissions for all the Microsoft Office Folder users to Read and Write.
Restart, same errorSee:
https://discussions.apple.com/thread/1948155?threadID=1948155&tstart=1
I had identical Installer Log failure notices: I used Houdini to view the invisible files and per Limnos' suggestion cautiously dragged
user > library > preferences > com.apple.installer.plist out of that folder onto my desktop and double-clicked on the .pkg file again and it opened and installed properly.
My Installer now works properly on all .pkg files. -
In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php
Maybe you are looking for
-
3rd Gen iPod Touch & Best "syncing" methods
my first gen 32GB iPod Touch recently bit the dust and was replaced with a 3rd gen version and I thought that "backing up this iPod" would back up apps, etc. but just backed up the Notes and some settings within the iPod. Which I found out when I res
-
I've installed my new Ipod Nano 2GB on my computer. Also i have installed iTunes. iTunes is running but i can't see my iPod in it and so it isn't possible to export any songs from iTunes to my ipod. Please help me Windows XP
-
Network Monitoring~~~Operations Manager 2012 R2
Hi All, I am using SCOM 2012 R2 when i am trying to discovery network devices it discovered, but its showing in discovery rules but not in network devices. Guys can you lent me how much time will it take ...
-
Connection error Novell Netware 4.11
Nowadays I've changed the operating system from 10.3 to 10.4. But unfortunatelly I can't connect a Novell Netware 4.11 server. The server is seen in the server list, but if I try to connect, tzhere is an error messages: "This file server uses an inco
-
What happens when NAC Server License Exceeds ?
Hi all, Got a simple question for which I could not find the explanations ? I know that licensing is run by the endpoints which are in Online User (posture assessed) list. Lets say I purchased a NAC server with 100 License. What happens if a client c