Server 4.0.3 website problems

Ever since I installed Server 4.0.3, all of my virtual domains were wiped out. When I recreate them, it goes to the default Apache "It Works!" page rather than the directory I specify in the GUI config. Additionally, it is doing this for the Server Website entry as well, both http and https.
I'm not 100% sure what caused this behavior, Server 4.0.3 seemed to install correctly. I tried using the http.conf from the 4.0.2 build, and it caused an error on a php lib that IS on the server itself.
I am at a loss, and I REALLY don't want to have to start the server over from scratch. If anyone has any idea what direction I can start looking in to resolve this it would be most appreciated.

without more information, i would advise you make sure you're editing the right httpd.conf files. if you're running sever's web server and not the builtin, you'll want to be editing the config file in /Applications/Server.app/Contents/ServerRoot/etc/apache2/ and not /etc/apache2 ... that one has bitten me before...

Similar Messages

The server clock on a website I use is 5 hours behind. When I use Internet explore, the time is correct.

The server clock on a website I use to make t-times (FORETEES) is 5 hours behind the current correct time. The time has always been correct until this morning. It is necessary for the server clock on this web site to be the same as my current time. I used IE to get into the FORETEES web site and the clock was correct on the FORETEES web site. What happened between yesterday and today on the Foxfire servers...

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle VM Server 3.1.1 Network problem

I installed Oracle VM Server 3.1.1 on HP ProLiant BL460c G1 Blade Server.
Installation had no problem, but network doesn't work at all.
If I write "ipconfig -a" I have this response:
bond0 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:5E
inet addr:192.168.99.160 Bcast:192.168.99.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:5E
UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Memory:f6000000-f6012000
eth1 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:54
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Memory:fa000000-fa012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:46 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6820 (6.6 KiB) TX bytes:6820 (6.6 KiB)
So - I think - my system recognize network cards.
I can ping loopback and server ifself, but I cannot ping nothing more.
Can you help me to solve problem?
Thank you

This is output:
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: eth0 (primary_reselect always)
Currently Active Slave: none
MII Status: down
MII Polling Interval (ms): 250
Up Delay (ms): 500
Down Delay (ms): 500
Slave Interface: eth0
MII Status: down
Speed: 100 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:1e:0b:8d:5e:5e
Slave queue ID: 0
Thank you

How to secure connection in sql server 2008? my main problem is which certificate should i add in mmc

i'm recently working on hardening of sql server 2008. now i face with a problem. my problem is how to secure connection in sql server 2008? my main problem is which certificate should i add in mmc? what are these certificates about?and guide
me in choosing the appropriate certificate.
and how should i know that the connection in sql server is secured?
plz guide me from the beginning cause i'm rookie in this subject.
thanks in advance.

Hi sqlfan,
Question 1: my problem is how to secure connection in sql server 2008?
Microsoft SQL Server can use Secure Sockets Layer (SSL) to encrypt data that is transmitted across a network between an instance of SQL Server and a client application. For more information about Encrypting Connections to SQL Server, please refer to the following
article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
Question 2: my main problem is which certificate should i add in mmc? what are these certificates about?and guide me in choosing the appropriate certificate.
To install a certificate in the Windows certificate store of the server computer, you will need to purchase/provision a certificate from a certificate authority first. So please go to a certificate authority to choose the appropriate certificate.
For SQL Server to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host
name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
Question 3: how should i know that the connection in sql server is secured?
If the certificate is configured to be used, and the value of the ForceEncryption option is set to Yes, all data transmitted across a network between SQL Server and the client application will be encrypted using the certificate. For more detail about this,
please refer to Configuring SSL for SQL Server in the following article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
If you have any question, please feel free to let me know.
Regards,
Donghui Li

Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.

Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.
I have to restart mail most times before it starts recieving or recognizes the pop server.
As I said a lot of recipients do not recieve my mails when there is an attachment or when I reply to their email.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

How do I set up my OSX Leopard Server to host a website?, how do I set up my OSX Leopard Server to host a website?

I own a small video game store and want to host my own website since I really don't want to spend the money on a hosting plan. I have a old G5 with OS X Leopard Server installed and have spent many countless hours reading tutorials on how to set it up, but none of them simply tell me what exactly to do. I have a very good knowledge of IT and didn't expect to have this much trouble.
I would like to set up the server to host the website, and also have it be able to do email as well (have a email address like [email protected])
I bought a domain from godaddy (www.g4uoc.com) , Have my G5 OSX Leopard Server up and running, have my website all built and ready to go, but I don't know how to set anything up. Can someone help me out at all?

There are numerous walkthroughs and tutorials on this, I'm surprised you couldn't find something.
Short answer:
1) dump your web content (HTML files, images, etc.) into /Library/WebServer/Documents
2) Configure your router to forward connections on port 80 to your server (the specifics will vary depending on your router make/model)
3) Use GoDaddy's web portal to setup www.g4uoc.com to map to your router's public address.
You're done. Remote users will lookup www.g4uoc.com on GoDaddy's servers and will get your router's public address. When they try to connect the router will forward the connection to your server which will serve the matching request from /Library/WebServer/Documents/

Apple website problems

My itunes wishlist shows 28 items total, 25 songs on page 1, 15 songs actual on page 1; what is going on? website problems when list was compiled. Cannot place order under these conditions. Please help.

My itunes wishlist shows 28 items total, 25 songs on page 1, 15 songs actual on page 1; what is going on? website problems when list was compiled. Cannot place order under these conditions. Please help.

I am trying to get to a website I go to daily and get the message: "An error occured with the SQL server This is not a problem with the IP Board but rather your SQL server." I have no idea what this error is or what to do about it.

I have tried clearing everything, rebooting, I just do not know what this actual error is. I was on the website, went back about 30 minutes later and that message. No other websites are bringing up this error.

If FCP captures the footage then capture with FCP and import the files into Premiere. Just a few extra clicks.
Or read this:
Cannot start DV or HDV video capture in Premiere Pro CS4 or later

Uploading flash website problem

I made a website in flash and everything is working fine in
the files. When I tested the site on my computer everything was
working just the way it should. However when I finally uploaded it
to my server not everything worked. I had 3 galleries that wont
load, videos that start playing automaticlly( I have them stopped
until the user hits play) and a music player that works great
except one song does not play. I am so confused as to what is
happening I do not even know how to fix it. I have tried loading
the site to 2 different servers and the same problem happens on
both, my files work fine, just not on the internet. Has this happen
to anyone and more importantly do you know how to fix it? I really
need to get this site up soon and I don't know what to do.
Any suggest would be greatly appreciated.
Thank you

Hi manada,
Issues like these are usually something very simple, just not
always obvious.
>I had 3 galleries that wont load, videos that start
playing automaticlly
>and a music player that works great except one song does
not play
I assume you are loading these externally into your main
movie?
If so, are you using actionscript which references the _root
timeline?
If you are, try to add:
this._lockroot = true;
on the first frame on the _root timeline of each movie. See
if this helps!
Another issue would be that the server might not allow script
access from Active content...but you have uploaded to 3 different
servers, it's hard to believe none of them allow it.
maybe its worth looking into?
Try that, and see how it goes. if you are still having
problems, post a link to the site, and i'm sure we will find a
solution.

Final Cut Server Download + Running public website

Hi all. I need help with my FCS set-up. We are a small non profit that uses our FCS to track our production assetts. We are running on a mac mini server. Right now we can download the installer and the FCS is up and running properly. But now we want to also run our website on our server, and we want to still have the ability to download the FCS client.
Any watch-outs or tips in doing this?

I agree with the Mac Mini being underpowered.. But sometimes you have to do what you have to do... With regards to both FCS and your website running on the same machine.. NO problem. The web server root is /Library/WebServer/Documents/ that is where the index.html goes and that is what will be served to web browsers when they connect too you server @ http://www.foo.com and the will still be able to get to you FCS @ http://www.foo.com/finalcutserver

Can't find server on one specific website

For the past 2 days I have been unable to access the website for nbcnews.com (and today.com which is related---however, I have no issues with nbcsports and nbc for shows). This has been one of my home tabs for months and nothing I can think of has changed in the last few days. I do not have problems with any other site I frequent.
I have tried accessing it different ways---through my home tab, through google, and through the nbc sites I can access---each time I get the same "Problem loading page Server Not Found Firefox Can't Find the Server at nbcnews.com".
I have tried clearing cookies and cache, and also discovered I can't reach this site on Chrome or IE either. I'm not sure I want to try a reset. Is there anything else I can try or any reason you can think of why this one site might be an issue?

Great! Glad you got that fixed! Please be sure to mark the solution that helped you by clicking '''Solves this problem''' on the right side of the reply.
If you have another question or problem with Firefox, do not hesitate to ask a new question by clicking [https://support.mozilla.org/en-US/questions/new Ask a New Question] and do not post your new question in this thread.

Server 4.0.3 website problems

Similar Messages

Maybe you are looking for