Server Admin error: servermgr_info

Something (as yet unknown, although I suspect my self-signed SSL certificate may have expired) caused my webserver (at least the secure portion) to be unresponsive. I tried to restart the server, but the finder was being unresponsive as well. So I was forced to hard-reset the server. It booted back up ok, but now the Server Admin is not working properly. After connecting to the server, I get the message
A service has encountered an error ... (“servermgr_info” server-side plugin may have unexpectedly quit)
I found the file /usr/share/servermgrd/cgi-bin/servermgr_info
and even tried replacing it with a copy from another OS 10.4 server (thinking that perhaps the file got munched in the force-quit, but that didn't help.
I downloaded a new copy of the Server Admin Tools, but they won't install when you already have them, and I see no way to uninstall the ones I've got.
Any thoughts?

Hi,
When I try to use the command..
/System/Library/ServerSetup/serversetup -setSerialNumber SERIAL NUMBER
It just comes back with the command usage.
Is there some speical way the serial number is entered?
Thanks.

Similar Messages

Server Admin error: servermgr_info plugin quit

Hi,
Server Admin is not working on my Xserve. It worked fine, until some time after I updated to 10.4.8 and installed KeyServer. I did deactivate KS and still no result.
A service has encountered an error.
servermgr_info server-side plugin may have unexpectedly quit
X Server
Dual 1.33 GHz G4
v 10.4.8
I tried
repair permissions
restarting
replacing com.apple.servermgrd.plist
using the dns name or the IP address
I would rather not re-install the system if there is
another solution.
Charles Myers
UMBC
Department of Visual Arts

Hi,
When I try to use the command..
/System/Library/ServerSetup/serversetup -setSerialNumber SERIAL NUMBER
It just comes back with the command usage.
Is there some speical way the serial number is entered?
Thanks.

Creating Open Directory Replica fails with Server Admin Error Value 1127

Hallo,
I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
When executing
slapconfig -createreplica master.ourdomain.com diradmin
as root on the prospective replica machine, I get the following error message:
ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
That makes perfect sense to me, but how is it meant to work then?
Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
root login is not permitted to this machine via public key authentication.
While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
Replica Setup failed : This machine does not have a valid computer name
I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
Thanks and bye, Christian Völker

ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
Then configure the /etc/sshd_config file on the OD master like this:
\# Authentication:
PermitRootLogin yes
PasswordAuthentication yes
PubkeyAuthentication no
and the /etc/ssh_config file on the OD replica like this:
PasswordAuthentication yes
PubkeyAuthentication no
Then from the OD replica as the 'root' user issue:
slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

Error 25308 on importing GoDaddy cert with Server Admin

Greetings,
We're in the process of migrating from Tiger Server 10.4.11 to Leopard Server 10.5.6. We did a clean install of 10.5.3 on a new machine, updated to 10.5.6, and started migrating user data. It's gone well, except that we can't import our GoDaddy SSL Certificate via Server Admin. We point the import process to the same certificate, private key and intermediate certificate that are used on our current server, but Server Admin says "failed", and I find this line in system.log:
3/17/09 3:42:33 PM servermgrd[47] servermgr_info: [47] [CertificateManager importIdentity:] Error importing private key: SecKeychainItemImport (err = -25308)
The result code means "Interaction with the Security Server is not allowed." according to Apple at http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html.
Can anyone point me in the right direction? Thanks.

Can you make a new cert via server admin and just have GoDaddy re-key it via your new information? It might be best to just start fresh with a clean install of the server.
JL

Server Admin hangs... error with servermgr_smb, says plug-in crashed

Whenever I run Server Admin and connect to the server, there is a very long delay before loading up the services and then stalls on Windows. An error window displays everytime. I am not running Windows sharing and this service should be turned off. I'm not sure where to go from here. Here is my system logs for this event:
Oct 12 22:05:35 web /usr/share/servermgrd/cgi-bin/servermgr_smb: [6900-a000b2a4] SIGALRM: process timed out
Oct 12 22:08:34 web servermgr_info: [6934-a000b2a4] SIGALRM: process timed out
Oct 12 22:09:34 web servermgr_info: [6945-a000b2a4] SIGALRM: process timed out
Oct 12 22:10:10 web servermgr_info: [6956-a000b2a4] SIGALRM: process timed out
Oct 12 22:11:10 web servermgr_info: [6998-a000b2a4] SIGALRM: process timed out
Oct 12 22:11:40 web /usr/share/servermgrd/cgi-bin/servermgr_smb: [6991-a000b2a4] SIGALRM: process timed out
Oct 12 22:13:22 web servermgr_info: [7026-a000b2a4] SIGALRM: process timed out
The error message that appears after Server Admin tries to load up is:
Try to refresh the view (209.147.120.141/Windows). Report the problem to the administrator if it persists. (“servermgr_smb” server-side plugin may have unexpectedly quit)
I have tried deleting the preferences file for Server Admin, I have tried replacing the servermgr_smb script in the cgi-bin folder, I have tried replacing the servermgr_smb bundle... I'm not sure where else to try and I haven't found much pertaining to this topic. Does anyone have any suggestions as to how to fix? Any help is appreciated.

I looked at the logs again and am still getting these same error messages:
Oct 16 15:30:14 web /usr/share/servermgrd/cgi-bin/servermgr_smb: [16259-a000b2a4] SIGALRM: process timed out
Oct 16 15:35:14 web /usr/share/servermgrd/cgi-bin/servermgr_smb: [16372-a000b2a4] SIGALRM: process timed out
Oct 16 15:40:14 web /usr/share/servermgrd/cgi-bin/servermgr_smb: [16995-a000b2a4] SIGALRM: process timed out
I'm also finding these errors in my servermgrd_error.log files:
[Sun Oct 15 20:37:06 2006] [error] [client 66.243.213.30] script not found or unable to stat: /usr/share/servermgrd/cgi-bin/servermgr_p69
[Sun Oct 15 20:37:06 2006] [error] [client 66.243.213.30] script not found or unable to stat: /usr/share/servermgrd/cgi-bin/servermgr_p69
[Sun Oct 15 20:37:07 2006] [error] [client 66.243.213.30] script not found or unable to stat: /usr/share/servermgrd/cgi-bin/servermgr_p69
Does anyone have any suggestions of where to start looking?

Server Admin keeps dispaying error "The service has encountered an error."

All the services in the Server Admin function are continuously displaying the following error message:
The service has encountered an error.
Try to refresh the view (servername.local/servicename). (kNetworkError)
I press OK and the message disappears, but I have to go through every service to remove this message, and then it just reappears a little later. But it doesn't seem to affect the operation of the server, but I'm concerned that this is disguising a future problem and would like to get rid of this occurring. I have searched the forums and found nobody to help me. Please can anyone help me?
Message was edited by: Viking Marauder

Thanks guys, it seems this is a feature of the operating system and Apple have not bothered to find a solution, maybe because you're not supposed to leave the server admin open for long periods of time. A little disappointing, however it does not seems to be causing any other problems with the server as it is running perfectly well.
Thanks to everyone for your input, I'll close this issue now, and as Jamie Curmi stated this may be resolved in the next release of the OS.

Error access ATG Dynamo Server Admin

Hello all,
I am Runnig ATG 10.1.2 with weblogic 10.3. on window server 2008
once i have install ATG Commerce Reference Store Installation and Configuration base on this guid
http://docs.oracle.com/cd/E36434_01/CRS.10-1-2/ATGCRSInstall/html/s0206configuringyourdatabaseconnectio01.html
I was able to :
log into :
--> Web logic Admin http://localhost:7001/console/
--> access the Business Control Center http://localhost:7103/atg/bcc
but i have got error when i have try to To access ATG Dynamo Server Admin
--> http://localhost:7103/dyn/admin
Error 500--Internal Server Error
javax.servlet.ServletException: Can't find component: /atg/dynamo/servlet/adminpipeline/AdminHandler
     at atg.nucleus.servlet.NucleusProxyServlet.initServlet(NucleusProxyServlet.java:194)
     at atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:234)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3732)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Also,
when I try to To access the ATG Store storefront http://localhost:7003/crs/storeus
the page was up, but the store product date,category and other data are empty!
*I did install and configure ATG products using the CIM by the above guid.
Please advice
Thank you all for your help
Joseph
Edited by: 999970 on Apr 14, 2013 12:26 PM
Edited by: 999970 on Apr 14, 2013 12:38 PM

It looks that you haven't selected DafEar.Admin in your module list to build the ear.
And regarding the crs, you might not have imported the crs data.
Check if you have data in cata/catb dcs_product/dcs_sku tables.
May be you might need to run CMS.
Peace
Shaik

ORA-28547: connection to server failed, probable Net8 admin error

Hi all. I use Oracle 10G. My listener.ora is below
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.8.26)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = sened)
(ORACLE_HOME = C:\Oracle\OraHome)
(PROGRAM = extproc)
I have database with name sened
And my tnsnames is below:
SENED =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.8.26)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sened)
When I start Windows, I can enter as sysdba . But when I issue "shutdown immediate", after that I can't connect as sys. And get this error:
ORA-28547: connection to server failed, probable Net8 admin error
And I stop my listener the I start it, it gives error:
SQL> host lsnrctl start
Service "sened" has 1 instance(s).
Instance "sened", status UNKNOWN, has 1 handler(s) for this service...
Why my database's status is UNKNOWN??
Thanks....

I get the error
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-06512: at line 51
when I try to run one of my sql scripts. The script tries to make an external procedure call. I am attaching the relevant .ora files.
1.
$ cat tnsnames.ora
2.
# tnsnames.ora Network Configuration File: /home/oracle/oracle/product/10.2.0/db_2/network/admin/tnsnames.ora
3.
# Generated by Oracle configuration tools.
4.
5.
ORCL =
6.
(DESCRIPTION =
7.
(ADDRESS = (PROTOCOL = TCP)(HOST = accord.novaglobal.com.sg)(PORT = 1521))
8.
(CONNECT_DATA =
9.
(SERVER = DEDICATED)
10.
(SERVICE_NAME = orcl)
11.
12.
13.
14.
EXTPROC_CONNECTION_DATA =
15.
(DESCRIPTION =
16.
(ADDRESS_LIST =
17.
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
18.
19.
(CONNECT_DATA =
20.
(SID = orcl)
21.
(PRESENTATION = RO)
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
cat listener.ora
37.
# listener.ora Network Configuration File: /home/oracle/oracle/product/10.2.0/db_2/network/admin/listener.ora
38.
# Generated by Oracle configuration tools.
39.
40.
41.
42.
SID_LIST_LISTENER =
43.
(SID_LIST =
44.
(SID_DESC =
45.
(SID_NAME = orcl)
46.
(ORACLE_HOME = /home/oracle/oracle/product/10.2.0/db_2)
47.
(PROGRAM = extproc)
48.
(ENVS = "LD_LIBRARY_PATH=/home/oracle/DSAccord/lib,
49.
ACCORD_SYSTEM_6=/home/oracle/DSAccord/system/,
50.
ACCORD_SETTINGS_6=/home/oracle/DSAccord/accord6.ini,
51.
EXTPROC_DLLS=libaccora10.so.6:libaccosk10.so.6")
52.
53.
54.
55.
56.
LISTENER =
57.
(DESCRIPTION_LIST =
58.
(DESCRIPTION =
59.
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
60.
(ADDRESS = (PROTOCOL = TCP)(HOST = accord.novaglobal.com.sg)(PORT = 1521))
61.
62.
63.
64.
65.
66.
67.
cat sqlnet.ora
68.
# sqlnet.ora Network Configuration File: /home/oracle/oracle/product/10.2.0/db_2/network/admin/sqlnet.ora
69.
# Generated by Oracle configuration tools.
70.
71.
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

10g ORA-28547: connection to server failed, probable Net8 admin error

Hii All
I am trying to install oracle10g release 2 client on windows machine but it gives me error ORA-28547
I have my oracle database resides on Linux machine with IP 192.68.1.202
My ORACLE_SID is oracle please help me out.
Please help
I have tried by setting
SQL_AUTHENTICATION_SERVICES = (NONE)
but it doesn't works with my case please help me out,,
Please its serious problem to me.
Thanking You

ORA-28547:     connection to server failed, probable Oracle Net admin error
Cause:     A failure occurred during initialization of a network connection from a client process to the Oracle server: The connection was completed but a disconnect occurred while trying to perform protocol-specific initialization, usually due to use of different network protocols by opposite sides of the connection. This usually is caused by incorrect Oracle Net administrative setup for database links or external procedure calls. The most frequent specific causes are: -- The connection uses a connect string which refers to a Heterogeneous Services agent instead of an Oracle server. -- The connection uses a connect string which includes an (HS=) specification.
Action:     Check Oracle Net administration in the following ways: -- When using TNSNAMES.ORA or an Oracle Names server, make sure that the client connection to the ORACLE server uses the correct service name or SID. -- Check LISTENER.ORA on the connection end point's host machine to assure that this service name or SID refers to the correct server. -- Confirm in TNSNAMES.ORA or the equivalent service definition that the connect string does NOT contain (HS=).
Apart from this, have you made sure that there are no issues with the physical network between server and the client?

Server Admin, Mailing lists, server_mgr error

Hi,
Everytime I try to use SA to add a mailing list (or anything under Mail), I get a "A connection with a server or service was lost" error. In the system log, I get this:
host /Applications/Server/Server Admin.app/Contents/ MacOS/Server Admin: HTTPREQUESTFAILED: https://hostname:311/ commands/servermgr_mail: err=0 (write)\n
I have tried repairing permissions and rebooting the server. I tried restoring the servermgr_mail service to default configuration. Any other ideas?

don't use Server admin to add a maillist
connect through your web browser.
go to
http://servername.domain.com/mailman/admin
http://servername.domain.com/mailman/create
you may need to turn web service on.

Server Admin App. Errors

Whenever I go to the overview of my server, this error message appears in the system log:
"Nov 26 16:26:05 server [0x0-0x1f01f].com.apple.ServerAdmin[478]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
Nov 26 16:26:05 server [0x0-0x1f01f].com.apple.ServerAdmin[478]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x5c1c750) failed. *
Nov 26 16:26:05 server [0x0-0x1f01f].com.apple.ServerAdmin[478]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
Nov 26 16:26:05 server [0x0-0x1f01f].com.apple.ServerAdmin[478]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x5c20e90) failed. *"
, and the graphs of the disk space, network usage, and CPU% are missing. I installed the server as an advanced configuration with no services running as a standalone server right now with Mac OS X 10.5.1.

I'm not having that issue, but I did have a real thrill this morning. Upon arriving at my office, I glanced at ServerAdmin. All my green buttons had gone gray! I looked at some logs and services seemed to be running normally. A little calmer, I quit and restarted SA.
It advised me that I had no services configured and an invalid serial number! Panic is setting in. Still the logs looked OK. I dropped into terminal and used the serveradmin command line. Everything is running except AFP which refuses to respond to a start. So ... when in doubt, reboot.
Now SA looks normal again. I wish I could say the same for my nerves.

Server Admin won't connect

Trying to connect to a X.5 server in server admin, but nothing happens. System.log shows:
Jan 26 10:43:30 server servermgrd92: servermgrd: readFile File /Library/Preferences/SystemConfiguration/com.apple.smb.server.plist is not a valid plist
Jan 26 10:43:30 server servermgrd92: pipe(stdin) error: 24
I've tried removing that plist as well as replacing it with the same plist from an identical server, but the same error shows.
I changed com.apple.ServerAdmin.Windows to /false in the servermgr_info.plist also with no luck.
Thanks for the assistance,
Kery

kill the svrmgrd and log out. try to log in under a new account and connect. If it does go back to the account with the issue and try. If it does not then there is an a preference file causing the issue, which I have been unable to find. I basically labeled my preference folder to old-preferences and had one recreated. Since then I have been fine. You will notice that the SMB service is disabled and needs to be re-setup.

Server admin issues

I can't connect to my server using server admin.
I've tried 127.0.0.1, the public IP address, and the private IP address with no luck.
In the logs I see this message that is about the same time I noticed the issue.
2/23/10 5:19:08 PM servermgrd[18299] [18299] process will force-quit to avoid deadlock
Immediately prior to that force-quit, there was this log message
2/23/10 5:19:08 PM servermgrd[18299] [18299] error in getAndLockContext: flock(servermgr_info) FATAL time out
Before that I seen numerous instances of this message
2/20/10 2:44:33 AM servermgrd[18299] servermgr_accounts: Couldn't find keychain entry for local computer record
Any ideas ?

I tried using launchctl to stop and start servermgrd, but that didn't fix my problem.
Rebooting the machine didn't help me either.
Adding the following line to /etc/hostconfig seems to have fixed my issue
SERVERMANAGERSERVER=-YES-
Unfortunately, the first line in /etc/hostconfig is
# This file is going away
That makes me think this is not the correct way to handle the problem.
Plus I have other machines that don't have that line in /etc/hostconfig, and they
can be managed via the ServerAdmin app just fine.
Does anyone know how to achieve the same result without editing the /etc/hostconfig file ?

Server admin unresponsive, any way to fix it?

Hi!
I have an issue with the services in Server admin, especially the iChat service. It seem to be reading settings forever, and I cannot make any changes that stick either, because as long as it's reading settings, the save button is greyed out. The service is working for users to connect to ann use. But this is crippling since I want to add a hosted domain to iChat. Other services are sluggish too when reading settings. This is a testsystem so doing a reinstall isn't really a problem, but I would like to avoid it and if possible reset the iChat service to it's default state and reconfigure it again, hopefully solving the issue. As this is a learning experience in preparation to setting this up for real, I would really like to get a solution for this without having to reinstall. Also, when it comes to SL server, there aren't really any best practices as to backing up services and it's data. A combination of several tools are suggested. TM in conjunction with CCC seem to be the best bets, but are there other solutions for a lossless restore? I have a TM backup of this machine, but how do I go about restoring a service state since there is no apparent way to restore hidden folders this way?
Anyone got the solution from your own experience?

I actually created another post for this, but I found this thread after searching for a couple hours. I am having the same issue, however, a server restart doesn't fix it for me. And Apple's article fix doesn't help either.
Here are my logs:
After a restart it appears servermanager can't connect via port 311:
{quote}
4/8/10 6:18:54 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:18:54 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:18:54 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:06 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:06 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:06 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:18 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:18 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:18 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:30 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:30 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:30 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(interactive,10.1.184.26,311): 61
4/8/10 6:19:40 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(localhost,127.0.0.1,311): 61
4/8/10 6:19:40 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(localhost,127.0.0.1,311): 61
4/8/10 6:19:40 PM /Applications/Server/Server Monitor.app/Contents/MacOS/Server Monitor[978] [978] ServerManager session failed in connect(localhost,127.0.0.1,311): 61
{quote}
And here are my servermgrd logs:
{quote}
4/6/10 12:14:12 PM servermgrd[65184] Allocated size has grown to 4M. Number of allocations is -5890. Exiting to clear possible memory leak.
4/6/10 12:14:12 PM com.apple.launchd[1] (com.apple.servermgrd[65184]) Exited with exit code: 12
4/6/10 12:14:13 PM servermgrd[98795] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/6/10 12:14:13 PM servermgrd[98795] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/7/10 12:14:13 AM servermgrd[98795] Allocated size has grown to 4M. Number of allocations is -10672. Exiting to clear possible memory leak.
4/7/10 12:14:13 AM com.apple.launchd[1] (com.apple.servermgrd[98795]) Exited with exit code: 12
4/7/10 12:14:14 AM servermgrd[43681] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/7/10 12:14:14 AM servermgrd[43681] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/7/10 8:16:47 AM servermgrd[43681] [43681] error in getAndLockContext: flock(servermgr_ftp) FATAL time out
4/7/10 8:16:47 AM servermgrd[43681] [43681] process will force-quit to avoid deadlock
4/7/10 8:16:47 AM com.apple.launchd[1] (com.apple.servermgrd[43681]) Exited with exit code: 1
4/7/10 12:59:11 PM com.apple.launchd[1] (com.apple.servermgrd[66064]) Exited: Killed
4/8/10 6:01:34 PM servermgrd[57] servermgr_web: Created WebDAV lock directory /var/run/davlocks
4/8/10 6:01:35 PM servermgrd[57] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/8/10 6:01:35 PM servermgrd[57] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/8/10 6:01:36 PM servermgrd[57] servermgr_info: markrunning_servicesconfigured(): marked running services configured: com.apple.ServerAdmin.Web, com.apple.ServerAdmin.AppleFile, com.apple.ServerAdmin.MySQL, com.apple.ServerAdmin.FTP, com.apple.ServerAdmin.Windows
4/8/10 6:04:11 PM servermgrd[57] servermgr_jabber[N]: Network change ignored - no change in host(s) or address(s).
4/8/10 6:06:21 PM servermgrd[57] servermgr_jabber[N]: Network change ignored - no change in host(s) or address(s).
4/8/10 6:07:44 PM servermgrd[57] servermgr_jabber[N]: Network change ignored - no change in host(s) or address(s).
4/8/10 6:07:57 PM servermgrd[57] servermgr_jabber[N]: Network change ignored - no change in host(s) or address(s).
4/8/10 6:15:58 PM servermgrd[61] servermgr_web: Created WebDAV lock directory /var/run/davlocks
4/8/10 6:15:59 PM servermgrd[61] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/8/10 6:15:59 PM servermgrd[61] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/8/10 6:24:17 PM servermgrd[61] servermgr_jabber[N]: Network change ignored - no change in host(s) or address(s).
4/9/10 6:15:59 AM servermgrd[61] servermgr_info: unexpected Software Update state: crashed
4/9/10 9:15:59 AM servermgrd[61] Allocated size has grown to 4M. Number of allocations is -8113. Exiting to clear possible memory leak.
4/9/10 9:15:59 AM com.apple.launchd[1] (com.apple.servermgrd[61]) Exited with exit code: 12
4/9/10 9:16:00 AM servermgrd[14887] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/9/10 9:16:00 AM servermgrd[14887] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/9/10 12:29:12 PM com.apple.launchd[1] (com.apple.servermgrd[14887]) Exited: Killed
4/9/10 12:29:12 PM servermgrd[18682] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/9/10 12:29:12 PM servermgrd[18682] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/9/10 2:22:21 PM sudo[21225] admin : TTY=ttys000 ; PWD=/Users/admin ; USER=root ; COMMAND=/System/Library/CoreServices/ServerManagerDaemon.bundle/Contents/MacOS/ servermgrd servermgrd -x
4/9/10 2:22:22 PM com.apple.ReportCrash.Root[21231] 2010-04-09 14:22:22.324 ReportCrash[21231:2803] Saved crash report for servermgrd[21230] version ??? (???) to /Library/Logs/DiagnosticReports/servermgrd2010-04-09-142222localhost.crash
4/9/10 2:23:09 PM com.apple.launchd[1] (com.apple.servermgrd[18682]) Exited: Terminated
4/9/10 2:23:10 PM servermgrd[21234] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/9/10 2:23:10 PM servermgrd[21234] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/9/10 2:23:35 PM com.apple.launchd[1] (com.apple.servermgrd[21234]) Exited: Terminated
4/9/10 2:23:35 PM servermgrd[21260] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/9/10 2:23:35 PM servermgrd[21260] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
4/9/10 2:28:56 PM sudo[21990] admin : TTY=ttys000 ; PWD=/Users/admin ; USER=root ; COMMAND=/bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.servermgrd.plist
4/9/10 2:29:16 PM sudo[21991] admin : TTY=ttys000 ; PWD=/Users/admin ; USER=root ; COMMAND=/bin/launchctl load -w /System/Library/LaunchDaemons/com.apple.servermgrd.plist
4/9/10 2:29:16 PM servermgrd[21992] servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
4/9/10 2:29:17 PM servermgrd[21992] servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
{quote}
Can't I just activate port 311? Why is this happening? Why would the port just suddenly not be active anymore?
Thanks!

Server Admin: VPN Connection Window all blank entries

Using Server Admin, when I goto..
VPN: Connections
It says I have 41 PPTP Connections, but they are all blanked out. There is no username, IP, Internal IP, Protocol, or Connected For. I wish I could attach a picture to show it. Only thing that keeps showing up in the error log is:
Fri Apr 9 00:59:23 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3f1892c2> <pcomp> <accomp>]
Fri Apr 9 00:59:23 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xde8e1a6d> <pcomp> <accomp>]
Fri Apr 9 00:59:23 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x33103b8e> <pcomp> <accomp>]
Fri Apr 9 00:59:25 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x45de7e2a> <pcomp> <accomp>]
Fri Apr 9 00:59:26 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3f1892c2> <pcomp> <accomp>]
Fri Apr 9 00:59:26 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xde8e1a6d> <pcomp> <accomp>]
Fri Apr 9 00:59:26 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x33103b8e> <pcomp> <accomp>]
Any chance it's a firewall issue?

Does nobody from Apple read this list?
My server still isn't working properly, and it's deeply frustrating.
Having done a lot of investigating I discovered that servermgrd is based on Apache, and I discovered where all it's files live. I've also discovered how to enable the debug menu in Server Admin.
If I try to access the "servermgr_info" command that I am seeing errors from in my servermgrderrorlog file via the command line (using sudo, so it executes as root, just as it should through servermgrd) then it works just fine with no complaints about access. The PasswordServer logs seem to imply that access gets granted when I run up Server Admin.
This seems to point towards servermgrd going wrong somehow and deciding for itself that access cannot be granted. Its configuration had not been changed in any way. Since these errors started all I have done to it has been to increase the logging, which had no effect.
The error message I get from Server Admin is as follows:
The login information is incomplete for this server or is not valid.
One or more services failed to accept the login information you provided for <myserver>. Check the Name and Password and try to log on again or contact your network administrator.
The error in the servermgrderrorlog file on a connection attempt is as I gave in my first message.
Curiously Server Monitor, which also uses servermgrd, is functioning perfectly, with apparently no authentication problems.
I've been very happy with my XServe until this problem came up. Just at the wrong time too - I'm about to expand our infrastructure, and suddenly my Mac server has become harder to administer than my Linux servers. Not very impressive, and the support I'm getting at the moment is far worse than I can get for Linux. Adding new XServe's had been my favoured option, but Linux's star is rising here at the momment.

Server Admin error: servermgr_info

Similar Messages

Maybe you are looking for