Server Admin keeps dispaying error "The service has encountered an error."

All the services in the Server Admin function are continuously displaying the following error message:
The service has encountered an error.
Try to refresh the view (servername.local/servicename). (kNetworkError)
I press OK and the message disappears, but I have to go through every service to remove this message, and then it just reappears a little later. But it doesn't seem to affect the operation of the server, but I'm concerned that this is disguising a future problem and would like to get rid of this occurring. I have searched the forums and found nobody to help me. Please can anyone help me?
Message was edited by: Viking Marauder

Thanks guys, it seems this is a feature of the operating system and Apple have not bothered to find a solution, maybe because you're not supposed to leave the server admin open for long periods of time. A little disappointing, however it does not seems to be causing any other problems with the server as it is running perfectly well.
Thanks to everyone for your input, I'll close this issue now, and as Jamie Curmi stated this may be resolved in the next release of the OS.

Similar Messages

The Service has encountered an error: ...(kNetworkError)

Was running 10.5.5 iCal server just fine. Then I decided to move the "Data Store:" in the settings tab to another location. Ever since then, when I click on the iCal service, the grinding wheel rolls on and gives this error...
The service has encountered an error.
Try to refresh the view (10.1.1.6/iCal). Report the
problem to the administrator if it persists.
(kNetworkError)
Please help. Sometimes, it does let me change the Data Store: area but then goes on to the error above. I tried refreshing, quiting, restarting the service, moving the folders around (library/calendarserver).

I am getting a similar error, but when trying to access the DHCP service. The message is "The service has encountered an error. Try to refresh the view (<host>/DHCP). Report the problem to the administrator if the problem persists. (The service did not recognize the command)".

Increase the DB size in Azure gives the Error " Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671."

Increase the DB size in Azure gives the following error
Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671.
i have used following ALTER query,
ALTER DATABASE database_name MODIFY (EDITION='Business', MAXSIZE=10GB);
Regards
Vel

Hi Taiye,
According to your description, in theory, we can modify the size of database, and the T-SQL statement in your post is right. So we need to verify if there is no problem with network when you execute the modification statement, in addition, you must be connected
to the master database when executing the ALTER DATABASE statement. As the error message, I recommend you login again and connect to the master database then run the statement again.
For more information, see: ALTER DATABASE (Windows Azure SQL Database)
If the error is still exist, the Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

"The service has encountered an error" over and over and over

I have a G5 server running 10.5 server, and up until recently it was working fine. It still works great, but when I open up Server Admin I'm constantly getting these errors from it:
http://imgur.com/I4v8L.png
Sometimes I get them when I click on random services too. Anyone have any ideas on how to fix this?

Hi
When using Server Admin you're less likely to see the problem if you use the Server's fully qualified domain name to achieve/maintain the connection rather than its local name. I consistently do this with all the Servers I support and never see that problem.
My 2p.
Tony

I keep getting the Error "Adobe Muse has encountered an error and will now exit..."

I keep getting the Error "Adobe Muse has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. UIDs With Multiple Owners: ImageFrame owned by PagePageItem and BaseLink". I get this when I try and save and I am not sure what is causing it or, since i made several changes to the site, which actions it would have been. I am using the latest updated version of Muse. the 2014.3 I was able to publish site with changes but it did not save, so I have a web version different then what is saved. My published site is the most recent one but the saved version is one without latest changes. When I tried to merge it started updating the Assets and then showed that Error message and shutdown.

I believe you have already updated Muse version which includes fix for this issue , if not then please update Muse to latest version.
Thanks,
Sanjit

Service has encountered an error. Kindly retry again.

Hello,
I have Premiere Elements 10. Every time I'm trying to create a Web DVD and select an option "Upload to Photoshop.com", after media is built I'm getting a message: "Failed. Service has encountered an error. Kindly retry again."
What could be wrong here? I have 2 Gb of space available.
Thank you.

I was having the same issue with a Plus account and Pre 10.
I opened up Premiere Elements (instead of welcome screen), I clicked the Home (house button) upper right corner which opens the Welcome Screen and noticed the retrieving user information just kept spinning. I didn't see this before because I don't usually go in this way. I just created shortcuts to Premiere and Photoshop to avoid the welcome screen.
I uninstalled Flash and restarted and reinstalled it. (not sure if this had any effect or not).
Then I opened Elements, clicked the Home Button - Welcome Screen again and this time it prompted me for my password.
I entered it logged in and now I am uploading my movie.

How to solve the error " The installation process encountered an error while installing Shared Technologies.

I had bought the adobe photoshop elements 12 online and I am not able to complete my installation although i tried many times . An error "The installation process encountered an error while installing Shared Technologies. Please restart your computer and try again" occur

Photoshop Elements 12 fails while installing sh... | Adobe Community

Error: The XML parser encountered an Error

Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error.
I am a beginning portal developer and need help identifying what is causing this error. I have gone into navigator, clicked the provider tab then clicked on the provider that I wanted to work with and got the above error. Can anyone tell me what is wrong.

Please try posting your question to the Oracle Portal Development Kit (PDK) forum.
null

ITunes Match error: iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

I have just subscribed to iTunes Match, and get the above error message. I have signed out and signed in several times, and still get the same message. Can anyone help with a solution?

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

Error: The XML parser encountered an error in your deployment descriptor. P

Hi,
I am very new to weblogi. I wrote a ejb in eclipse with xDoclet. When I deploy the ejb, Im getting this error:
<b>Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 5 Module: SessionLessEjb Error: [EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was: XML document does not appear to contain a properly formed DOCTYPE header. </b>
Im using weblogic 8.1.5
In the deployment descriptor I have this DOCTYPE as
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.5 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
Can someone help me pls?
Thanks.

Hai James this the response I am getting can you please tell what should I write inside ora:getNodeValue() to get the value of node <genReturnText>
The drag and dropping the variable name is not working, I have to write the path manually but I dont know how.
<ns1:getRoutingAndFrameJumpersResponse xmlns:ns1="com.NetworkInstallations">
-<com.GetRoutingAndFrameJumpersOutput>
<destination>
SW
</destination>
<e2EData>
busProcOriginator
</e2EData>
<genReturnCode>
40777
</genReturnCode>
<genReturnText>
EMW_Get_Routing_And_FrameJumpers_Succeeded
</genReturnText>
<supplCode>
ISY002
</supplCode>
<supplText>
Transaction successfully completed.
</supplText>
<severityCode>
S
</severityCode>
<retriable>
false
</retriable>
</com.GetRoutingAndFrameJumpersOutput>
</ns1:getRoutingAndFrameJumpersResponse>

Session keeps running when the query has a syntax error

I have a weird scenario.
Take this query for example: select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6));
This query has a syntax error as there is an additional bracket at the end. I know that. When I run it on STJOSE database the session keeps running and never returns. Even if I stop it, it does not. I try to disconnect, it says "Connection is currently busy. Try again?" This behavior is pretty consistent on STJOSET. If I run this query on UMASS database it gives me this error (as expected)
ORA-00933: SQL command not properly ended
00933. 00000 - "SQL command not properly ended"
*Cause:
*Action:
Error at Line: 1 Column: 99
I do not know what is wrong with the STJOSE database connection that causes the session to hang and never return.
Please help.
-Nags
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production (both databases)
SQL Developer Version 3.0.04 Build Main-04.34

This does not happen in sql*plus. It does not hang. It returns a proper error message.
HSI@stjose> select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6));
select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6))
ERROR at line 1:
ORA-00933: SQL command not properly ended
HSI@stjose>

Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FIX: Zen Micro Installer Error - "DemoShield Player has encountered an error.

I just thought I'd post a solution to a problem I was having with the Zen Micro Explorer software installation because it might help someone else. Also, this forum is well indexed by search engines so it will be easy for people to find. It took me well over an hour to track this down.
After starting the Zen Micro Explorer Installer CD, a full screen splash is shown of the creative logo and then DemoShield is started for the software install. It shows an intro screen where you must click 'Next,' on clicking next the DemoShield program was crashing with the generic Windows error "DemoShield encountered an error..." The problem appears to be a software conflict between DemoShield and Apple's QuickTime (any version as far as I know). Disabling the QuickTime startup entry does not help, installing in Safe Mode does not help and exiting any instance of QT in the system tray does not help either.
To fix the problem you must un-install the QuickTime software from your computer by going through the Add/Remove Programs screen in the Control Panel. Once un-installed, run the Creative installer CD again, this time it will run correctly. Follow the on-screen prompts to complete the install.
<i>Please note that if you have installed iTunes on your system it will not run while QuickTime is uninstalled, this is normal. Re-installation of QuickTime is covered later in this post.</i>
When you have completed the install and restarted your computer you can re-install QuickTime. At the time of writing (4th Sept 2005) QuickTime and iTunes are bundled in one download package so you must download both. You can <a href='http://www.apple.com/QuickTime/download/' target=_blank>get the bundle here[/url]. Let it download and run the installer. If you already have iTunes installed, the installer will 'Repair' your installation, detecting that QT is missing it will re-install. If you do not have iTunes the installer will installer iTunes and QuickTime.
When you have completed the QuickTime+iTunes install you have got around the DemoShield issue. I hope this of use to anybody with a similar problem.Message Edited by PhilM on 09-5-2005 02:30 AM

Hi Jeremy,
I knew it was an issue with QuickTime because I clicked on 'Send Error Report' on the error message and it took me to <a href='http://oca.microsoft.com/en/response.aspx?SGD=0b73e24-7433-4ee-ac4c-49956d08c85c&SID=623' target=_blank>this page[/url]. It states "An analyst at Microsoft has investigated this problem and determined that an unknown error occurred in QuickTime Player. This software was created by Apple Computer, Inc.."
My QuickTime version is 7.0.2. My operating system is WIndows XP Home (Athlon 64; 52Mb RAM)
Eventually I just tried uninstalling QuickTime and it wroked after I did that. Some screenshots: <a href='http://www.phantomphil.co.uk/ZM/' target=_blank>Click[/url]
The contents of my disk.id file reads:
Creative Zen Micro
ZENM-CDSD-W-LB
Hope this hel
ps.
Message Edited by PhilM on 09-5-2005 02:45 AMMessage Edited by PhilM on 09-5-2005 02:48 AMMessage Edited by PhilM on 09-5-2005 02:49 AM

I cannot upload the Facebook cover I created in PSE 13. I get the following error: "Service has encountered an error. Kindly retry again."

I have tried several different Facebook covers I created in PSE 13 and cannot upload any of them to Facebook. I have authorized PSE to be able to post to my Facebook account and the App Settings are correct. I am able to post videos from Adobe Premiere Elements 13 so I know my Facebook settings are correct. OS is Windows 7. I have contacted Abobe support 3 times and they cannot figure out why the Facebook cover I created in PSE 13 will not upload.

Looks like naming the LUNs in 1.1 went bad. I upgraded to 1.2 and renamed the LUNs (twice in fact) and then it worked. Hmm

Outlook for Mac 2011 error: "Sync Services has encountered a problem and needs to close"

I keep getting the Syce services error. I did find
http://support.microsoft.com/kb/2547327, which fixed the problem only for a day or two. now the problem is back. I need a permanent solution, not one I have to keep repeating. Any ideas on how I keep this error from popping up?

Hi everyone,
I also met this issue before few days ago and I was looking forward a best solution for solving this issue too. In the midst of lot of answers
from different users and consultants, I got a blog that was recently published by someone, and then I move towards the blog beside that I discovered a nicer solution. It’s my personal experience. If any of you want to get free by barring this issue then you
also can try this solution once along with if you too wants to switch from Mac Outlook to Windows Outlook, here is a good solution for that matter too.
Helping link:
https://sites.google.com/site/errorsonmacoutlook/
Hope the above blog helps you too as it do it to me.

Server Admin keeps dispaying error "The service has encountered an error."

Similar Messages

Maybe you are looking for