Server Admin says Web service Not Available

The service status indicator is dark grey (not the dimmed grey of a service being off), and even the Settings view switch button is not showing.
However, Apache is running and serving just fine.
I had someone install Tomcat 5.0.28 today (using port :8080), and I really think that's related as the problem wasn't present until after this. This person unfortunately removed the built-in Tomcat and installed Tomcat 5 in its place (which we'll move tomorrow), but I'm wondering if there's some config settings or something that could be causing a conflict?
Or, maybe there's another reason altogether. What would make Server Admin think Apache is not even available, when in fact it is actually running just fine.
Thx for any ideas...
Xserve G5 DP 2.3GHz Mac OS X (10.4.4)

Similar Messages

CIMC on C210 server throws Error 2001: Service not available message

I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available" message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
Thanks in advance!
Jess

I got it working on one of the servers, and havent tried the same solutions on any other server.
What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
I'm not sure if it will work on the rest of the servers, but it's worth a try
Regards
Alex

Web service not available in F4 help of document template

Hi ,
I have created a web service using tool WS_DESIGN_TOOL. Its active and status is productive. Now when I am creating document template , I am not able to see this web service in F4. Hence not able to create document template with my web service.
I also tried by copying standard web service and then using it but even that web service is not available in F4.
Do we need to any additional steps so that web service appears in F4 help of document template.
Thanks,
Madhura

Hi,
The service is active in SICF or in SE80 under package $WS_BOL_GEN.
I have assigned Business Transaction . I have followed steps as per below thread.
[Re: CRM 7.0 Document templates;
Any more suggestions are welcome.
Thanks,
Madhura

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

My phone says my cdma service not available what does this mean

my phone says cdma service not available what does this mean

This has just happened to me. My phone (Samsung Intensity) worked great on Sunday. Sent and received several texts while at home on Sun during Steeler football game. Monday night, while sitting outside of my home in my driveway, could not make a call. Message said CDMA SERVICE NOT AVAILABLE. On the front of my phone it says Searching SVC. No bars. Icon of a cell phone with a diagonal line through it. Tuesday night, same. Didn't think about trying it at my office. Tried the dialing *228 send option 2 but that doesn't exactly work when the phone doesn't work. My husband's phone (Casio GZOne) also not working at our house.

I keep putting elements code in and all i get is redemption service not available

i am trying to download elements 12 with my code but when entered keeps saying redemption service not available ???

Johnrhinos1 please utilize a different web browser to implement you redemption code. Which web browser were you using? I would also recommend reviewing Redemption Code Help.

Everytime i download.(service not available/wap co...

I have nokia 2730 classic...everytime i download something on the internet it will not continue to download and it always says that service not available/wap connection ended.pls help me fiz this problem.

I have an Aspire 1551 which I loaded 8 onto but I cannot get to any drivers on the support site!!! GRRRR! I tried searching by model and also the SNID with no sucess. Please, please don't tell me Acer purged their database! Right now I have a perfectly good laptop which is useless at the moment because I cannot load the necessary drivers. @ Acer Support: please fix your support page so we can download drivers!!! People are counting on their computers to pay bills, manage bank accounts and keep in touch with family/friends!!! It is really hurting some people who need their computers!!!!

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

Is Web service security available?

Dear Experts,
In RWB, when i click on Integration Engine(in component monitoring) i get a yellow triangle next to it instead of green. Result of self test says that
Is Web service security available?
"Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)".
Can u guys tell me the reason behing this.
Thanks & regards.

Hi,
Check if you have selected any security level for the WebService or may be it is across the firewall. Probably you need to install the related certificates and have to configure the SSL layer.
refer
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Use transaction STRUST to set up an SAP Web AS ABAP engine as HTTPS server. If not already done, you have to import a certificate generated by a trusted CA identifying the SAP Web AS. In addition, you have to enable the HTTPS port in the ICM (Internet Communication Manager).
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Thanks
Swarup

Topology.svc - Endpoints - Web Services High Availability

Hi,
I was recently performing some simple DRP tests before going to production and i faced some issues i never encountered before..
(followed
http://blogs.msdn.com/b/besidethepoint/archive/2011/02/19/how-i-learned-to-stop-worrying-and-love-the-sharepoint-topology-service.aspx for usefull commands related to enpoints)
My farm:
SP 2013 - CU August 2013
2 WFE (WFE1, WFE2)
2 App (App1, App2) : Most services started on both servers (UPSS on APP1, UPS on both) - Central Admin on Both.
SQL Cluster
At normal state the command : (Get-SPTopologyServiceApplicationProxy).ApplicationProxies | Format-List *
returns > ServiceEndpointUri :
https://app1:32844/Topology/topology.svc
(if i'm not wrong, this topology.svc can run on only one server at a time)
I stopped WFE1, no pb, the NBL (appliance) is doing the job.
Then I stopped the App1 and started to have some issues. (most enpoints not balanced to app2)
I run the job "Application Addresses Refresh Job"
Or launch PS command : Start-SPTimerJob job-spconnectedserviceapplication-addressesrefresh
Wait 20 sec.
A few endpoints are now on APP2 (MMS, Search), it seems to work, i reached my web page.
I ask a mate to try and he got the "sorry we encountered and error..." > Can't load user profile.
I refreshed my browser and got the same error.......
ULS review, I can see that some svc request (most about user, profiledbcacheService) are still on APP1 !!
A failure was reported when trying to invoke a service application: EndpointFailure Process Name: w3wp Process ID: 6784 AppDomain Name: /LM/W3SVC/93617642/ROOT-1-130445830237578923 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:e8315f8e5d7d4b1b90876e3b0043a4ae#authority=urn:uuid:164efb17f28c4d2d9702ce3e86f0c0e8&authority=https://app1:32844/Topology/topology.svc
Active Endpoints: 1 Failed Endpoints:1 Affected Endpoint:
http://app1:32843/e8315f8e5d7d4b1b90876e3b0043a4ae/ProfileService.svc
The command (Get-SPTopologyServiceApplicationProxy).ApplicationProxies | Format-List *
Still return me that my topology.svc is on
https://app1:32844/Topology/topology.svc
But App1 is down !!
If my understanding is ok: Normally, the internal round robin loadbalancer (Application Discovery and Load Balancer Service, started on all servers, not configurable) should manage this.
Application Addresses Refresh Job is running each 15 min. and refreshs available endpoints, using the topology.svc
But, the topology.svc called is always on APP1 which is down !
At this time, i haven't found why SharePoint is not detecting that APP1 is down and is not
automatically recreating a topology service on another available server.....
If you have any idea...your help is welcome :)
Regards,
O.P

Hi ,
For achieving Web Services High Availability, you need to make sure service-applications have more than one server to service them to increase back-end resiliency to a SharePoint server dropping off the network.
You can refer to the blog:
http://blogs.msdn.com/b/sambetts/archive/2013/12/05/increasing-service-application-redundancy-high-availability-sharepoint.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

Itunes will not install..windows INSTALLER service not available.windows 7

I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
Message was edited by: ehindahl

Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
(Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

ORA-29278: SMTP transient error: 421 Service not available

Hi all,
I'm using Oracle 10g working on Windows XP Home.
I'm trying to send a basic mail from my stored procedure.
When I tried to run the code, I get ORA-29278: SMTP transient error: 421 Service not available.
Below is the code I'm trying.
CREATE OR REPLACE PROCEDURE SEND_MAIL (
msg_to varchar2,
msg_subject varchar2,
msg_text varchar2 )
IS
c utl_smtp.connection;
rc integer;
msg_from varchar2(50) := 'Oracle9.2';
mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
BEGIN
c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
dbms_output.put_line('ok');
utl_smtp.helo(c, mailhost);
utl_smtp.mail(c, msg_from);
utl_smtp.rcpt(c, msg_to);
utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
'To: ' || msg_to || utl_tcp.crlf ||
'Subject: ' || msg_subject ||
utl_tcp.crlf || msg_text);
utl_smtp.quit(c);
EXCEPTION
WHEN UTL_SMTP.INVALID_OPERATION THEN
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
WHEN UTL_SMTP.TRANSIENT_ERROR THEN
dbms_output.put_line(' Temporary e-mail issue - try again');
dbms_output.put_line (sqlerrm);
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line(' Permanent Error Encountered.');
END;
Below are the possibilites I tried..
I tried to ping localhost.. This is the output I get
C:\Documents and Settings\Me>ping localhost
Pinging polasa [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
In one of the thread, a user suggested to do the following
Go to Control Panel->Add or Remove Programs->Click on
Add/Remove Wndows Components
Check IIS check box.
Select Internet Information Service (IIS) option and click on Details button
Check whether SMTP Service is checked or not.
If not selected then select SMTP check box.
This process should be done on server.
It will help out from ORA-29278: SMTP transient error: 421 Service not available
problem.
There is no IIS in my Windows Components..
Any suggestions? Thanks in advance

It sounds like you don't have an SMTP server running on your local machine.
Even if you install IIS (or some other SMTP server), that is probably not enough to send email outside of your machine because your machine is unlikely to be trusted by the downstream mail servers. If you are running this in a company, you'll need to talk to your company's mail admin to determine where the corporate SMTP server is running. If you running this at home, you'll need to find out from your ISP what SMTP servers are available to you.
Justin

ANONYMOUS LOGON Web Server to WCF Web Service(Different Server)

Hi,
       I have facing login credentials lost web server to wcf web service(different server). I got correct data if i open my web site from Web Server but i got "403 forbidden" if i call from client pc or other server.
I used domain account to run the web application for my own web site. Is it something wrong on my configuration at each server. I have no idea to how to make it to correct. I don't find correct answer on Google or bing.
Here
is server information and SPN List. Please let me know if want to know more details.
1. Domain Server
2. CRM Server (Web Site is host on this server)
- Enable Kernel Mode
- Windows authentication (1st - Negotiate, 2nd - Ntlm)
- Impersonate
- Application Pool (domain\account)
3. ERP Server (WCF Web Services is host on this server - support kerberos + ntlm).
- domain\account to run services.
- constrained delegation to sql server
4. SQL Server
Here is SPN on each Server and Service Account
SQL Server SPN List
MSSQLSvc/WS08R2SP1-SQL.domain.local:1433
MSSQLSvc/WS08R2SP1-SQL.domain.local
WSMAN/WS08R2SP1-SQL
WSMAN/WS08R2SP1-SQL.domain.local
RestrictedKrbHost/WS08R2SP1-SQL
RestrictedKrbHost/WS08R2SP1-SQL.domain.local
HOST/WS08R2SP1-SQL
HOST/WS08R2SP1-SQL.domain.local
CRM Server SPN List
TERMSRV/WS08R2SP1-CRM
TERMSRV/WS08R2SP1-CRM.domain.local
WSMAN/WS08R2SP1-CRM
WSMAN/WS08R2SP1-CRM.domain.local
RestrictedKrbHost/WS08R2SP1-CRM
RestrictedKrbHost/WS08R2SP1-CRM.domain.local
HOST/WS08R2SP1-CRM
HOST/WS08R2SP1-CRM.domain.local
ERP Server SPN List
TERMSRV/WS08R2SP1-ERP
TERMSRV/WS08R2SP1-ERP.domain.local
WSMAN/WS08R2SP1-ERP
WSMAN/WS08R2SP1-ERP.domain.local
RestrictedKrbHost/WS08R2SP1-ERP
RestrictedKrbHost/WS08R2SP1-ERP.domain.local
HOST/WS08R2SP1-ERP
HOST/WS08R2SP1-ERP.domain.local
Domain\NavSvrAdmin (Running Navision Web Service Account) SPN List
HTTP/WS08R2SP1-ERP.domain.local
HTTP/WS08R2SP1-ERP
NAV61-SG_Demo/WS08R2SP1-ERP.domain.local:7046
NAV61-SG_Demo/WS08R2SP1-ERP:7046
Here is login fail list on Web Server (CRM Server) using
WinShark.
Here is LogIn information on ERP Server. I got this log if i access my web site from client pc.
ERP Server
An account was successfully logged on.
Subject:
   Security ID:       NULL SID
   Account Name:       -
   Account Domain:       -
   Logon ID:       0x0
Logon Type:           3
New Logon:
   Security ID:       ANONYMOUS LOGON
   Account Name:       ANONYMOUS LOGON
   Account Domain:       NT AUTHORITY
   Logon ID:       0x45e781
   Logon GUID:       {00000000-0000-0000-0000-000000000000}
Process Information:
   Process ID:       0x0
   Process Name:       -
Network Information:
   Workstation Name:   WS08R2SP1-CRM
   Source Network Address:   -
   Source Port:       -
Detailed Authentication Information:
   Logon Process:       NtLmSsp
   Authentication Package:   NTLM
   Transited Services:   -
   Package Name (NTLM only):   NTLM V1
   Key Length:       128
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
   - Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
   - Transited services indicate which intermediate services have participated in this logon request.
   - Package name indicates which sub-protocol was used among the NTLM protocols.
   - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
SQL Server Properties
Link 1 Link 2
ERP Server Properties
Link
CRM Server Properties
Link
    Please ignore my mistake if i post wrong place.
Best Regards,
Make Simple & Easy

Legacy Web services and WCF services are discussed in the Services secition in the ASP.NET forum.
http://forums.asp.net/

Runtime Service not Available after Copy

Hi
OWB 10g,
Oracle DB 8.1.7.4.12
I'm trying to copy the whole database, including all OWB and Runtime Repository and reload to another server.
After that, OWB client works fine but when I try to connect Deployment Manager, the error massage shows: Runtime Service not Availabe. ( the Runtime connection properties are changed to match the new server). I then tried to manually start the runtime service, the error massage shows: Not available. And I then run Service_Doctor, it shows "Platform Service Not Available".
For what I searched from metalink and here, the solution is always saying 'Reinstall the Runtime Service'.
Is there any idea that I can make it work without reinstall because I don't want to start from scratch to redeploy and reload all of my data?
I'm waiting on line.
Thank you,
Daming

Hi Igor,
I manually change table wb_rt_servuce_nodes with the proper hostname, service name, OWB home name. Also check the value in OWBRT_SYS.OWBRTPS, no problem. But Runtime service still not started. So I give up and then try to do it from scratch.
I tried to reinstall all the repositories (OWB and runtime ) on the new server and still got the same problem.
What I've done is drop all the repositories via Runtime Assistant and then done 'drop user rtr cascade' from sqlplus for all the target schemas and rtr/rtu. Then create new reopositories again. After that I restart the database , runtime service not started. Then I tried manually start it, failed.
Anyidea? Should I reinstall the software?
Thanks,
Daming

Server Admin says Web service Not Available

Similar Messages

Maybe you are looking for