Server Automatic Reboot

Dear all,
i have solution manager on windows 2003 Enterprise Server X 64 Bit with service pack 2 , i had install Solution Manager with ORacle on it now i face a problem that suddnly after some days server get restarted automatically with the following error.
please let me know what to do.
this is a HP BL460C Blade server. connected with Storage via SAN swtich and to the network via Gigabit ethernet switch.
here i peste the error with which system get rebooted. it shows me in event viewer system log.
Error code 000000000000000a,
parameter1 0000000000000004,
parameter2 0000000000000002,
parameter3 0000000000000001,
parameter4 fffff8000104af25.
please let me know where is problem.
thanks & regards
saurabh

Hi dear,
IT is an hardware error !
You must contact the hardware support.
Probably the problem is on the raid controller o RAM.
Antonio Voce.

Similar Messages

Oracle VM 3.1 Server automatically reboots after - stopping it

When I try to stop my OVM 3.1 server, using shutdown, or init 0 the server stops, but automatically boots again....
Anyone run into the same problem?
Thanks for all your suggestions
Rob

dave wrote:
The OVM server? Yes OVM Server :)
I've not seen this before. It could be that the hardware doesn't support the poweroff signal from the OS. Although I'm not sure if it is that much of an issue, as you rarely turn off / on the OVM servers themselves. You can easily power it off if it does a reset not a poweroff.The reboots after "init 0" disappeared once after I added a third NIC to my box, and dedicated it for virtual machines
ie, my Windows 7 box, on which I setup the entire VM infrastructure using VirtualBox has 3 NICs. Two for the VM Server, and the third one for the VM Manager.
The second NIC with VM Server configured to handle the traffic from Virtual Machines, isolating the 1st NIC for all other VM Server traffic. No more rebooting with VM Server and always shuts down with a "init 0"
Hope this info is useful for few others out there
regards,
raj
Adding something I missed with last post
Following sequence is always used to shutdown the VM Server as my setup has NFS shares setup from VM Manager server itself
1. Shutdown VM Server first (Stops all heartbeats etc gracefully)
2. Stop OVMM service on VM Manager server
3. Shutdown VM Manager Server
Edited by: Raj Thampi on Aug 18, 2012 11:45 AM

Server attempts reboot or shutdown, but can't

I've been having a problem with a G4 Xserver. It had been intermittent (every couple of months) for a while, but it's been crashing multiple times a day recently.
I'm on 10.2.8, running AFS and FTP, with Netinfo for login. I have about 23 users, and it's rare for many of them to be on at any given time. I do have Retrospect client installed, and Timbuktu.
When it stops responding, I usually see the spinning daisy, as though the machine is shutting down or rebooting. Once or twice, I have seen the solid blue screen. The activity lights on the front panel are pegged at the top end.
Usually I get a run of several of these, then it stops. The first one has always had software update showing, which may be coincidence. This time, it's been going on for a week, and I need to get a resolution.
Crash logs and panic logs show nothing. Watchdog shows the restart process, but nothing for why the activity level pegged and it tried to restart. Automatic reboot is enabled in case of a freeze. Sample of watchdog log:
#Start-Date: 2005-09-20 09:59:41 AKDT
#Fields: date time s-comment
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/PasswordService" as pid 308.
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/sambadmind" as pid 309.
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/PrintServiceMonitor" as pid 310.
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/hwmond" as pid 311.
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/serversettingsd" as pid 312.
2005-09-20 09:59:41 AKDT     Started child "/usr/sbin/MacintoshManagementServer" as pid 313.
2005-09-20 09:59:41 AKDT     Automatic reboot timer enabled.
#Start-Date: 2005-09-20 11:55:08 AKDT
#Fields: date time s-comment
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/PasswordService" as pid 309.
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/sambadmind" as pid 310.
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/PrintServiceMonitor" as pid 311.
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/hwmond" as pid 312.
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/serversettingsd" as pid 313.
2005-09-20 11:55:08 AKDT     Started child "/usr/sbin/MacintoshManagementServer" as pid 314.
2005-09-20 11:55:08 AKDT     Automatic reboot timer enabled.
2005-09-20 11:57:27 AKDT     Re-reading config file.
2005-09-20 11:57:27 AKDT     Reaped child process 314 ("/usr/sbin/MacintoshManagementServer"); quit with exit status 0.
2005-09-20 12:06:01 AKDT     Re-reading config file.
2005-09-20 12:06:01 AKDT     Started child "/usr/sbin/MacintoshManagementServer" as pid 530.
I have done some looking around the web, and I hear of others having problems due to hardware issues (UPS, and so on). I will be replacing the battery tomorrow, and I'm considering resetting the PMU. Another other ideas?
My usual process is to run fsck and repair permissions. This usually does the trick, but not this time.
Thanks in advance!
Anne

I replaced the battery a week and a half ago, and it was up for over a week. After a couple of crashes after that, I started leaving the server closet door open, and that has kept it up for a couple of days. So far, so good.
I don't have a UPS. I did hear from someone in the neighborhood about a power outage one particular evening, but that's it.
The screen is used for 3 different machines, and is turned off or disconnected most of the time, so no screen saver. The only energy save options that are enabled are to restart after a power outage or freeze. It doesn't sleep.
I have heard, on the osx server list, about software update hanging computers, and, separately, about the PMU forcing a restart (instigated by restart when system hangs being checked). None of the exact details (hardward, OS, logs) are identical to my situation.
The next time it crashes, I'll uncheck restarting after a freeze or power outage.
Oh, there's a second machine right below it (slot-loading Xserver, same OS, does web server and moodle), and it has no problems. I keep thinking it is most likely some hardware issue (the jet-engine fans, maybe).
Thanks for the idea!
Something else that I tried, although it didn't give me anything useful:
I left process viewer running, but shut off the monitor. When it tried to restart, I could see the last view of process viewer under the spinning daisy wheel. Which showed process viewer as the highest CPU using item, at 2.7%. Although it was refreshing every 3 seconds and could have been outdated information by then, it was worth a try.

Automatic reboot of my MBP

Hello, I have the following problem when I want to do the following:
I have to log measurements with a logger from pico (www.picotech.co.uk). This is a windows-software. Therefor I'm using parallels desktop 5. The measurement should take about three weeks. In this time the MBP way not turn off or go into sleep, because the pico-software must take every 5 seconds a sample of the voltage and write it to disk.
What's the problem:
After a certain time (always a little less than three hours) without keyboard or keypad access, the MBP reboots. When I touch the touchpad every two hours, the MBP does not reboot. So I can get through the day (when I'm in my testlab), but during the night the MMBP reboots.
What have I done to avoid this (without success):
- standard in Parallel's the windows energy settings are to never shut-down or hibernate
- in the Mac osX Lion software, I set the energy settings to never sleep.
- I downloaded and activated the program "Caffeine" to simulate activity to prevent MBP going asleep.
But nothing helps (till now).
I hope you guys can help me out...
Here I post the part of the system log when the reboot takes place. Can somebody confirm (or deny) that Parallels Desktop 5 could be the cause?
30/08/11 00:34:10,744          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:34:10,744          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:34:10,744          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677          HPEventHandler          NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:47:00,897          KernelEventAgent          tid 00000000 received event(s) VQ_DEAD (32)
30/08/11 00:47:02,000          kernel          /drv/ HypVMManager.c:302   Monitor quited successfully
30/08/11 00:47:05,000          kernel          0        0 AppleUSBCDC: start - initDevice failed
30/08/11 00:47:08,230          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,230          prl_client_app          kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:08,230          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,230          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,230          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,231          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,231          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,231          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,231          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,231          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,231          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,232          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,263          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,263          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,264          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,264          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,264          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,264          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,264          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,264          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,264          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,264          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,265          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,265          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,266          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,266          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,266          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,266          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,267          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,267          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,267          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,267          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,267          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,267          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,267          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,268          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,268          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,268          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,268          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,269          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,269          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,269          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,270          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,270          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,270          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,271          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,271          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,271          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,271          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,271          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,271          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,271          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,272          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,272          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,272          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,272          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,272          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,272          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,273          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,273          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,273          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,273          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,273          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,273          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,274          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,274          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,274          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,274          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,274          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,274          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,274          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,274          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,275          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,275          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,275          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,275          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,275          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,275          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,275          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,275          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,276          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,276          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,276          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,276          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,277          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,277          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,277          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,277          prl_client_app          -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,277          prl_client_app          kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,278          prl_client_app          -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,278          prl_client_app          kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,278          prl_client_app          kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,278          prl_client_app          __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,279          [0x0-0x44044].com.parallels.desktop.console          Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,356          com.apple.launchd.peruser.501          ([0x0-0x6c06c].com.apple.Console[726]) Exited: Killed: 9
30/08/11 00:47:08,390          mds          (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
30/08/11 00:47:08,413          com.apple.launchd.peruser.501          ([0x0-0x62062].com.apple.AppleSpell[683]) Exited: Killed: 9
30/08/11 00:47:08,416          com.apple.launchd.peruser.501          (com.apple.quicklook[1267]) Exited: Killed: 9
30/08/11 00:47:08,583          com.apple.launchd.peruser.501          (com.apple.mdworker.pool.0[758]) Exited: Terminated: 15
30/08/11 00:47:08,743          loginwindow          DEAD_PROCESS: 441 console
30/08/11 00:47:09,728          loginwindow          CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
30/08/11 00:47:09,728          com.apple.loginwindow          No session list!
30/08/11 00:47:09,728          loginwindow          CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
30/08/11 00:47:09,770          UserEventAgent          CaptiveNetworkSupport:UserAgentDied:139 User Agent @port=26635 Died
30/08/11 00:47:09,854          prl_naptd          Exiting Parallels Network Daemon
30/08/11 00:47:11,258          loginwindow          Login Window Application Started
30/08/11 00:47:14,097          loginwindow          **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/08/11 00:47:15,902          com.apple.SecurityServer          Session 100011 created
30/08/11 00:47:15,903          loginwindow          Login Window Started Security Agent
30/08/11 00:47:16,210          com.apple.launchctl.LoginWindow          com.apple.findmymacmessenger: Already loaded
30/08/11 00:47:16,708          WindowServer          kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:16,708          loginwindow          kCGErrorFailure: CGSPackagesGetWorkspaceType: couldn't get workspace type
30/08/11 00:47:16,708          loginwindow          kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:17,481          UserEventAgent          ACRR: Failed to save usage store to /Library/Application Support/CrashReporter/Intervals_36731CBE-B2C2-54E8-B132-48355AC06C89.plist
30/08/11 00:47:17,731          SecurityAgent          Echo enabled
30/08/11 00:47:17,731          SecurityAgent          Echo enabled
30/08/11 00:47:29,851          prl_vm_app          This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
30/08/11 00:47:30,431          SecurityAgent          kCGErrorFailure: CGSPackagesGetWorkspaceType: couldn't get workspace type
30/08/11 00:47:30,431          SecurityAgent          kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:55:32,973          UserEventAgent          ACRR: Failed to save usage store to /Library/Application Support/CrashReporter/Intervals_36731CBE-B2C2-54E8-B132-48355AC06C89.plist
30/08/11 00:55:35,000          kernel          hibernate image path: /var/vm/sleepimage
30/08/11 00:55:35,000          kernel          sizeof(IOHibernateImageHeader) == 512
30/08/11 00:55:35,000          kernel          Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 400000 ssd 0
30/08/11 00:55:35,000          kernel          hibernate image major 14, minor 0, blocksize 512, pollers 5
30/08/11 00:55:35,000          kernel          hibernate_alloc_pages flags 00000000, gobbling 0 pages
30/08/11 00:55:35,000          kernel          hibernate_setup(0) took 0 ms
30/08/11 00:55:35,000          kernel          /drv/ MacModule.cpp:261   powerStateWillChangeTo: flags=4 stateNumber=2
30/08/11 00:55:35,000          kernel          /drv/ MacModule.cpp:266   powerStateWillChangeTo: found flag=kIOPMSleepCapability (4)
30/08/11 00:55:35,000          kernel          00000000 00000020 NVEthernet::setLinkStatus - not Active
30/08/11 00:55:35,000          kernel          /drv/ MacModule.cpp:261   powerStateDidChangeTo: flags=4 stateNumber=2
30/08/11 00:55:35,000          kernel          /drv/ MacModule.cpp:266   powerStateDidChangeTo: found flag=kIOPMSleepCapability (4)
30/08/11 00:55:40,000          kernel          hibernate_page_list_setall start 0xffffff8065754000, 0xffffff8065773000
30/08/11 00:55:40,000          kernel          hibernate_page_list_setall time: 266 ms
30/08/11 00:55:40,000          kernel          pages 750299, wire 148505, act 47095, inact 127, spec 14, zf 1152, throt 0, could discard act 206280 inact 138290 purgeable 9074 spec 199762
30/08/11 00:55:40,000          kernel          hibernate_page_list_setall found pageCount 196893
30/08/11 00:55:40,000          kernel          IOHibernatePollerOpen, ml_get_interrupts_enabled 0
30/08/11 00:55:40,000          kernel          IOHibernatePollerOpen(0)
30/08/11 00:55:40,000          kernel          writing 195648 pages
30/08/11 00:55:40,000          kernel          encryptStart 2e2d0
30/08/11 00:55:40,000          kernel          encryptEnd 9242ae0
30/08/11 00:55:40,000          kernel          image1Size 240834560, encryptStart1 2e2d0, End1 9242ae0
30/08/11 00:55:40,000          kernel          encryptStart e5ad800
30/08/11 00:55:40,000          kernel          encryptEnd 12e6eb40
30/08/11 00:55:40,000          kernel          PMStats: Hibernate write took 3770 ms
30/08/11 00:55:40,000          kernel          all time: 3770 ms, comp bytes: 801665024 time: 977 ms 782 Mb/s, crypt bytes: 229464912 time: 1404 ms 155 Mb/s,
30/08/11 00:55:40,000          kernel          image 317123584, uncompressed 801665024 (195719), compressed 315122720 (39%), sum1 2aecdeef, sum2 45c654e9
30/08/11 00:55:40,000          kernel          wired_pages_encrypted 94415, wired_pages_clear 52916, dirty_pages_encrypted 48388
30/08/11 00:55:40,000          kernel          hibernate_write_image done(0)
30/08/11 00:55:40,000          kernel          sleep

I have found the cause of the automatic rebooting of my MacBook Pro. In fact it was not an automatic rebooting, but an automatic logging-out of the system.
In the security and privacy settings (beveiliging en privacy in Dutch), there is an option to automatic logout after a certain time of inactivity (log uit na een periode van xxx minuten).
This was selected and was put on 160mins. I don't know how this was set this way: did I do it one time myself or was it by default this way.
Because I get the same login-screen after display sleep, PC-sleep, and logging-out, I couldn't see a difference.

Mac OS 8.6 Auto network connect to a server after reboot is not working

We have multiple old blue and white systems on a network. All but one will automatically connect to the network when rebooted. I have gone into Chooser, Appletalk, put in the server IP address, put in the server password, checked the boxes that say remember Server name and password for next startup. I can connect at that time with no problem. When I reboot, the server does not automatically hook up. I have to go back into Chooser, etc. I created an alias on the desktop, but it still prompts me for a password to connect. I have performed a clean install of the Mac OS 8.6. It still does not connect to the server after reboot (after configuring all the settings again after the clean install). Please help..

Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How to start Report Server automatically in developer suit 10g

Hi all
I have an application implemented using Developer Suit 10 g forms and reports builder.
For this application, the first report to be printed after booting the computer takes a long time (around 5 minutes)
when printing any more report (even if it was the one printed before ) it takes a little time, this means that the first report made the report server start.
I rebooted the computer, but this time i started the report server manually using this command :
<strong>rwserver server=report_server_name</strong>
Now, the report is printed after a little time, It's OK.
<strong>Is there any configuration to start the Report Server automatically in developer suit 10g after the computer boots ?
</strong>Please help

No answer ?

Init 0 or shutdown -i0 on solaris 8 automatically reboots

I have a solaris 8 server and when I issue init 0 or shutdown -i0 it automatically reboots. I was able to issue init 5 and it shutdown/power down, but not init 0.
I looked at inittab and it shows
s0:0:wait:/sbin/rc0 >/dev/msglog 2<>/dev/msglog </dev/console
Any suggestions?
thanks

Hi
Thank you. I have 2 SunFire v440s. Both have auto-boot?true and I only have this problem with one of them. I was able to issue init 5 and the server shut down, but both init 0 or shutdown -i0 rebooted.
Unfortunately the server with the problem is remote so I can't do allot of testing with it.
Thank you for your suggestions.

Can I set up a way to automatic reboot after a kernal panic?

Hey,
I'm working with Mac OS X Server (10.4.9) that is on a 4x2.5 GHz PowerPC G5. I been looking for a way to set up my server to automatically reboot after a kernel panic. Can any one show me the way?
Thanks
Mike

We use to use a 'spare' server for testing but could be pushed into production. For when IBM needed to come in and replace a faulty card.
Get on-site contract, and order an Xserve and use the old G5 Quad workhorse as spare... but you said this is not your usual company, so maybe that don't see things like an IT might.
Swap out RAM for one. Install ECC which Quad can use. And those FAQ lists make a good spreadsheet of what happens.
You might just start with Apple Hardware Test and a memory test.
Warmer weather, I assume it is in climate controlled room?
Have you read up on http://www.xlr8yourmac.com reports on Quad owners and liquid cooling? I know some that went through three motherboards (on-site swap) and a few that walked away with Mac Pro because it was determined the patient reached the point of not being able to be revived.

T5120 Jumpstart: unable to update system firmware for automatic reboot

Hi,
i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
Installing boot information
        - Installing boot blocks (c0t0d0s0)
        - Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting
WARNING: CHANGE DEFAULT BOOT DEVICE
         If you want the system to always reboot Solaris from
         the boot device that you've specificed (c0t0d0s0),
         you must change the system's default boot device using
         the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
{0} ok printenv
Variable Name           Value                          Default Value
ttya-rts-dtr-off           false                          false
ttya-ignore-cd           true                           true
keyboard-layout
reboot-command
security-mode           none                           No default
security-password                                      No default
security-#badlogins   0                              No default
verbosity                   min                            min
pci-mem64?              true                           true
diag-switch?              false                          false
local-mac-address?   true                           true
fcode-debug?            false                          false
scsi-initiator-id           7                              7
oem-logo                                                 No default
oem-logo?                 false                          false
oem-banner                                             No default
oem-banner?             false                          false
ansi-terminal?            true                           true
screen-#columns       80                             80
screen-#rows            34                             34
ttya-mode                 9600,8,n,1,-                   9600,8,n,1,-
output-device           virtual-console                virtual-console
input-device              virtual-console                virtual-console
auto-boot-on-error? false                          false
load-base                 16384                          16384
auto-boot?                 true                           true
network-boot-arguments
boot-command          boot                           boot
boot-file
boot-device               disk                           disk net
multipath-boot?         false                          false
boot-device-index      0                              0
use-nvramrc?            false                          false
nvramrc
error-reset-recovery    boot                           bootDoes anybody have any ideas what the problem could be?
I browsed several boards and a huge set of websites but did find anything related.

At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot.

Server automatically restart when built jsp page

When i want to build a jsp using the build.xml file the server automatically restart..
the following error shows in console
Buildfile: C:\AE10\ATG10.0.3\WatchCart\Storefront\build.xml
copyFiles:
[echo] Start Copying ----
[copy] Warning: WEB-INF\web.xml modified in the future.
[copy] Warning: checkout\gadgets\shippingInitialize.jsp modified in the future.
[copy] Warning: javaScriptEx\first.jsp modified in the future.
[copy] Warning: javaScriptEx\second.jsp modified in the future.
[copy] Warning: javaScriptEx\second1.jsp modified in the future.
[copy] Warning: javaScriptEx\third.jsp modified in the future.
[copy] Warning: navigation\gadgets\sites.jsp modified in the future.
[copy] Warning: sku\sku.jsp modified in the future.
[copy] Warning: sku\skuDisplay.jsp modified in the future.
[copy] Copying 2 files to C:\AE10\jboss-5.1.0.GA\server\atg_watchprod\deploy\ATG.ear\store.war
[echo] Finish copying -----
BUILD SUCCESSFUL
Total time: 328 milliseconds
Thanks in advance

sachindere76 ,
good question, but this is not the problem.
I did re-code my "public int getCard1()" method though:
it was:
public int getCard1 () {
return card1;
and I changed it to:
public String getCard1 () {
return Integer.toString(card1);
since my jsp page tag was aparently looking for a string to work with, returning a String from the method seems to have helped now.
I rebooted my machine and re-strated jakarta-tomcat server to verify and it worked fine this time.

Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.

Mail server automatically cc all email for user to other acct but group...

Back on April 2007, David_X answered this question:
How to have the mail server automatically cc all e-mail for user to other accounts, (gmail, hotmail, etc). Here is the old post that explains that:
http://discussions.apple.com/thread.jspa?messageID=4357149&#4357149
What I did not catch at the time was if you setup a Group, one of three ways, the cc step no longer works. There is a fourth way but it is not practical. Creating local groups on individual Macs.
*Group method 1 per David_X:*
Use edited group files on the server.
The following sends to members of groups but does not show all recipients in the received message...
In /etc/postfix/aliases, add...
groupname: :include:/path/to/groupname.txt
In a file called groupname.txt (using plaintext editor)...
[email protected]
[email protected]
Reload aliases...
sudo newaliases
sudo postalias aliases
sudo postfix reload
Mail sent to [email protected] gets passed to amavisd once, before then being relayed out for each individual recipient.
*Group method 2 per David_X:*
Make a user, e.g., "accounts"
In mail settings, select 'Forward' option and enter the group members' email addresses, comma separated e.g.,
[email protected],[email protected]
This gets a bit 'long' for lots of members.
The email then gets sent to each of the people in this list.
*Group method 3 that I just discovered:*
Create a group in Workgroup Manager.
Drag the users you want in it.
Save.
Test sending to that group.
Best part, the group name shows up in Address Book if you have LDAP setup.
So I have setup all three. If I send an email to any type of group, they work.
The problem:
If one of those members in the group also has a BCC setup to Gmail or any other outside email, they never get the e-mail copied out to the external account.
Example:
I send an email to [email protected]. He gets the email there and also a copy at his Gmail account.
If I send an email to the Sales group that jsmith belongs to, he gets the email there but nothing at the Gmail account.
It looks like the mail server processes the "aliases" file and skips the "Recipient_bcc" file that handles the forwards.
Is there a way to have my cake and eat it too? David_X your thoughts also?
Thanks everyone!

Bump.
Short version. Sales guy has a Gmail account he wants his e-mail copied to also.
Send e-mail directly to his Xserve account, he gets it there and it gets sent on to his Gmail account.
Send an e-mail to the sales Group that he is a member of, he gets it there but it never gets sent out to the Gmail account.
Ideas?

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go Connect to Server etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go > Connect to Server > etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

Node Manager not starting UCM Server automatically

Hi All,
I have configured Node Manager to start and stop UCM 11g server.
But whenever, I am restarting the host OS - Windows server 2003 64 bit, it does not start the UCM managed server, automatically.
I am running two managed servers on the same host OS, the first UCM manages server, starts automatically on every restart.
The second managed UCM server, does not start. I need to then manually start the managed server. There are no errors logged, and the manual start of the managed server happens without any issues.
As a workaround, I tried starting the managed server from Windows scheduler, but it does not start the server as well. I wrote a script like -
Myscript.cmd
call E:\..\user_projects\domains\prod_domain\bin\setDomainEnv.cmd
java weblogic.WLST c:\start....\ServerStart.py
scheduled the script (myscript.cmd) to run from the Windows Scheduler.
Any pointers would be very helpful. Are there any known issues, if there are two managed servers, and one starts automatically, which affects the starting of the second managed server?
I see the following error in the log file -
<14/10/2011 6:35:22 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<14/10/2011 6:35:33 PM EST> <Info> <Management> <BEA-141223> <The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.>
<14/10/2011 6:35:33 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
Regards
Avi

Hi Avi,
Give a cross check to your ServerStart.py
As the error states The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist
In your ServerStart.py you might have specified as follows
sh start MAnagedWeblogic.sh server=PRD_UCM_Server1
While these are the list of Server you have in your weblogic
PRDAdminServer,
PRD_UCM_server1,(You have Specified in your command PRD_UCM_Server1
PRD_IBR_server1
The Command should be as follows
sh start ManagedWeblogic.sh server=PRD_UCM_server1
This should help
Regards
Fabian

Windows Server 2012 reboots while removing the Hyper-V vSwitch.

I have a WIn2k12 server with Hyper-V running. While removing the vSwitch configured in Hyper-V, the server got rebooted. In the event logs below mentioned error was notices.
he computer has rebooted from a bugcheck. The bugcheck was: 0x00000019 (0x0000000000000024, 0x00000000000000f2, 0x0000000000000001, 0xfffffa800b9ba6c0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 072314-20248-01.
The Windows has generated a MEMORY.dump which is ~570MB in size. Is it possible to analyze the MEMORY.dump and find the cause for a server reboot.
Can you please someone help me to narrow down the root cause of this issue and how to avoid this issue in the future.

Hi,
Thanks for your reply. I analyses the the MEMORY.DMP using the WinDbg. Provided the debug output below. Will this help you to narrow down the root cause and let me know if any similar issue faced by someone else.
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator.HORNET\Desktop\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Product: Server, suite: TerminalServer DataCenter SingleUserTS
Built by: 9200.16384.amd64fre.win8_rtm.120725-1247
Machine Name:
Kernel base = 0xfffff802`46e1b000 PsLoadedModuleList = 0xfffff802`470e5a60
Debug session time: Wed Jul 23 00:21:33.552 2014 (UTC - 7:00)
System Uptime: 21 days 23:35:15.105
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 19, {24, f2, 1, fffffa800b9ba6c0}
Probably caused by : Pool_Corruption ( nt!ExFreePool+7ab )
Followup: Pool_corruption
7: kd> !analyze -v
*                        Bugcheck Analysis
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000024,
Arg2: 00000000000000f2
Arg3: 0000000000000001
Arg4: fffffa800b9ba6c0
Debugging Details:
BUGCHECK_STR: 0x19_24
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8024708b8b1 to fffff80246e96040
STACK_TEXT:
fffff880`0baf01a8 fffff802`4708b8b1 : 00000000`00000019 00000000`00000024 00000000`000000f2 00000000`00000001 : nt!KeBugCheckEx
fffff880`0baf01b0 fffff802`46ff8126 : fffffa80`0b9ab000 fffff8a0`07514f10 fffff880`00000000 fffff802`746e6f43 : nt!ExFreePool+0x7ab
fffff880`0baf0290 fffff802`4756ad69 : fffffa80`087efc60 fffffa80`0891a3d0 fffff8a0`07514f10 fffff802`4756ad5c : nt! ?? ::FNODOBFM::`string'+0x20768
fffff880`0baf02d0 fffff880`014dac48 : fffffa80`08915d02 fffffa80`087efc60 fffffa80`0b9ab000 fffffa80`0891a3d0 : hal!HalFreeCommonBuffer+0xd
fffff880`0baf0300 fffff880`01478d21 : fffffa80`0b9ab000 fffff880`0baf0301 00000000`0000f6c0 fffffa80`087d31a0 : NDIS!ndisFreeSharedMemory+0xa8
fffff880`0baf0350 fffff880`0419948a : fffffa80`0b600000 fffff880`0baf03d0 00000000`000000fa 00000000`206c644d : NDIS!NdisMFreeSharedMemory+0x65
fffff880`0baf0390 fffff880`014da127 : fffffa80`087d31a0 00000000`00000000 fffffa80`0863abb0 fffffa80`0863abb0 : b57nd60a!UM_Initialize+0xf5a
fffff880`0baf03e0 fffff880`014f583c : 00000000`00000000 00000000`00000006 00000000`0000017e fffffa80`087d31a0 : NDIS!ndisMInvokeHalt+0x47
fffff880`0baf0410 fffff880`014d6094 : fffffa80`087d31a0 fffffa80`0000017e fffff880`0baf0700 fffffa80`087d31a0 : NDIS!ndisMCommonHaltMiniport+0x4ac
fffff880`0baf04a0 fffff880`014f7b3f : fffffa80`087d31a0 fffffa80`087d31a0 fffffa80`0f5d67c0 fffffa80`0863abb0 : NDIS!ndisMHaltMiniport+0x4c
fffff880`0baf04d0 fffff880`014dc3a4 : fffffa80`087d31a0 fffffa80`087d31a0 fffffa80`0fedf5f0 fffffa80`087d3050 : NDIS!ndisPnPRemoveDevice+0x24f
fffff880`0baf0660 fffff880`014f9320 : fffffa80`0fedf5f0 fffffa80`087d3050 00000000`00000000 fffffa80`087d3100 : NDIS!ndisPnPRemoveDeviceEx+0x84
fffff880`0baf0690 fffff880`014eb8a7 : fffffa80`0fedf5f0 fffff880`0baf0720 fffffa80`087d31a0 00000000`00000000 : NDIS!ndisPnPIrpRemoveDevice+0xd8
fffff880`0baf06f0 fffff802`471a3337 : fffffa80`087d3001 fffffa80`087d3050 00000000`00000001 fffff880`02d6e180 : NDIS!ndisPnPDispatch+0x2f8b7
fffff880`0baf0750 fffff802`472b371c : 00000000`00000002 fffff880`0baf0819 fffffa80`0834b770 fffffa80`0834d880 : nt!IopSynchronousCall+0xc7
fffff880`0baf07c0 fffff802`46f22f01 : fffff8a0`06dd3010 00000000`00000000 fffffa80`0834b770 00000000`00000000 : nt!IopRemoveDevice+0x100
fffff880`0baf0880 fffff802`472b3544 : fffffa80`0834d880 fffffa80`0834b770 00000000`00000016 fffff8a0`06ff0f01 : nt!PnpRemoveLockedDeviceNode+0x22d
fffff880`0baf08d0 fffff802`472b3415 : 00000000`00000000 00000000`00000000 fffff8a0`06ff0f70 fffffa80`0834b770 : nt!PnpDeleteLockedDeviceNode+0x78
fffff880`0baf0910 fffff802`472b1c88 : 00000000`00000000 fffff880`0baf0a70 fffff8a0`00e90aa0 00000000`00000000 : nt!PnpDeleteLockedDeviceNodes+0xa1
fffff880`0baf0970 fffff802`472a5acd : fffff880`00000000 00000000`00000000 fffff8a0`02318b00 fffff8a0`00000000 : nt!PnpProcessQueryRemoveAndEject+0xbd8
fffff880`0baf0ae0 fffff802`4719f6e5 : fffff8a0`06dd3010 00000000`00000000 00000000`00000001 0000113b`ab6c0c00 : nt!PnpProcessTargetDeviceEvent+0xa1
fffff880`0baf0b20 fffff802`46ece391 : fffffa80`0e2d1880 fffff8a0`00e90aa0 fffff802`4719f400 fffffa80`0c9a3090 : nt!PnpDeviceEventWorker+0x2e5
fffff880`0baf0b80 fffff802`46e3d521 : fffffa80`0ffae120 00000000`00000080 fffff802`46ece250 fffffa80`0e2d1880 : nt!ExpWorkerThread+0x142
fffff880`0baf0c10 fffff802`46e7bdd6 : fffff880`02c00180 fffffa80`0e2d1880 fffff880`02c0bf40 fffffa80`07967340 : nt!PspSystemThreadStartup+0x59
fffff880`0baf0c60 00000000`00000000 : fffff880`0baf1000 fffff880`0baeb000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!ExFreePool+7ab
fffff802`4708b8b1 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!ExFreePool+7ab
FOLLOWUP_NAME: Pool_corruption
IMAGE_NAME: Pool_Corruption
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.2.9200.16384
MODULE_NAME: Pool_Corruption
BUCKET_ID_FUNC_OFFSET: 7ab
FAILURE_BUCKET_ID: 0x19_24_nt!ExFreePool
BUCKET_ID: 0x19_24_nt!ExFreePool
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x19_24_nt!exfreepool
FAILURE_ID_HASH: {c3047b92-37bb-1137-aca7-b38e46a08f03}
Followup: Pool_corruption

Server Automatic Reboot

Similar Messages

Maybe you are looking for