Server, browser or Muse?

I have updated some pages on my website and uploaded the html to the server. The pages render nicely on Opera but I get the previous versions of the pages on Chrome and Firefox., even after hitting the reload/refresh buttons. Why?

Hi,
Most probably this is a browser's cache issue, however, even after clearing that if you still get the error then, please post the url of the web site as well as the screen shot of the old vs the new content.
Regards,
Abhishek Maurya

Similar Messages

Unable to start SQL Server Browser service in Sql server 2005

we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!

Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
Gaurav

Hi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li

SQL Server Browser

I am installing SQL Server 2012.
At the "Server Configuration" point, "SQL Server Browser" greyed out, and set to "NT AUTHORITY\LOCAL SERVICE"
Will I be able to amend the SQL Server Browser to use an different account after install ?
(using Sql Server Config Manager for example ?)
Thanks in advance
Pete

Yes any time you can configure...
Default Account
Setup configures SQL Server Browser to use the account selected for services during setup. Other possible accounts include the following:
Any domain\local account
The local service account
The local system account (not recommended as has unnecessary privileges)
http://msdn.microsoft.com/en-us/library/hh510203.aspx
http://technet.microsoft.com/en-us/library/ms165734(v=sql.90).aspx
Raju Rasagounder Sr MSSQL DBA

SQL Server browser services.

we have two instance of sql server 2014,
In Services, It shows only one SQL Server browser services.
Is it true there is only one SQL Browser service for both instances.
Thanks
V

Yes, This is normal.
Prior to SQL Server 2000, only one instance of SQL Server could be installed on a computer. SQL Server listened for incoming requests on port 1433, assigned to SQL Server by the official Internet
Assigned Numbers Authority (IANA). Only one instance of SQL Server can use a port, so when SQL Server 2000 introduced support for multiple instances of SQL Server, SQL Server Resolution Protocol (SSRP) was developed to listen on UDP port 1434. This listener
service responded to client requests with the names of the installed instances, and the ports or named pipes used by the instance. To resolve limitations of the SSRP system, SQL Server 2005 introduced the SQL Server Browser service as a replacement for SSRP.
more info: SQL Server Browser Service
T-SQL e-book by TechNet Wiki Community
My Blog
My Articles

Avanti ssh error need a server browser to move files

I need a server browser so I can edit / add some files on my firewall I tryed to use avanti ssh server browser but I get an error saying
"failed to connect to avanti server daemon not running
" so how can I get this running or how do I config it to get it to work? Or is there something better? I also tried " ssh -p xxx me_@myfirewall" but I get
bash: ssh: command not found

You need to install openssh first: http://wiki.archlinux.org/index.php/SSH
I don't know about avanti, but most arch deamons can be started by running
/etc/rc.d/<deamon> start

SQL Verification Problem / Muse Form Issue (Server uses MySQL muse uses SQLite) I'm in desperate need of help

       Alright well here is my issue... I have been trying to fix it on my own for the past week non stop and I have finally came to a solid conclusion as to the cause of the issue.
   I always get the error "The server has encountered an error..." in red text when anyone tries to submit a form and also when I try and test it myself. This led me to test the server / site for compatibility or issues by using the test:
mydomain.com /scripts/form_check.php
I got the first two checks green (pass) and the third test threw a red check meaning I was having an issue with SQL verification. This then led me to days of trying to work with my hosting provider (one.com) trying to solve the problem and I was told that they use mySQL on their servers and that they couldn't do anything on their end to solve the issue. I read alot that we are recommended in this case to try and get our host to add the SQLite database to their server or whatever it is they would do, long story short I guess many people are able to ask their host to make SQLite work and most accept and add SQLite functionality to their servers but unfortunately my hosting provider doesn't want to do this and they said they were sorry and that I would need to either switch the script to work with mySQL or figure something else out...
   I took a lot of time building my site and I dont want to take the form out. I absolutely need it... I know many post on here saying "forms dont work, oh poop " or "adobe sucks I dont want to use business catalyst grrr" but I tried to find the source of the problem and I've successfully came to the conclusion that my issue is that my script wants to use SQLite but in order for my sites forms to work the server needs to have SQLite as well... My idea is that if I can configure the script and the site itself to use mySQL instead of SQLite the SQL verification will then not be an issue and my websites forms will function with no issues. I am curious if a member of the staff with adobe has experience with this particular issue and can help me out? or if a member of the adobe community has solved this problem? If not I am hoping that with the description I provided that someone with knowledge of mysql, sqlite or code in general could help me modify the script or write a new script that will allow the forms to work properly. I know its a long shot, I say that because this discussion is full of people who used muse in favor of dreamweaver because just like a large number of people in the muse discussion area, I'm a graphic designer, with plenty of computer experience, art and design skill and I am extremely familiar with photoshop. Muse is perfect in so many ways. In fact, like I mentioned above, I don't even have a complaint at this time about muse. I understand the form issue in this case, and I imagine in thousands of other users situations, is all just a matter of scripts and compatibility.. Its just a little issue between the SQLite scripts we are all given when we export our muse website and the SQL version our various hosting service may be using on their servers.
   Just incase I missed anything, to provide just a bit more info on the topic and myself for anyone who may be able to help:
I can alter the text inside of the scripts easily if anyone happens to know any lines of code that easily solve this issue (making the muse contact forms, which are native to SQLite, functional on a server using mySQL)
I was told one way I could make the forms work on a server using mySQL (or any version other than SQLite) If I were to make changes to adobe muses SQL version by converting the SQLite db to mySQL db (db = database)
I am computer literate and I can take any directions necessary, I really just need to get this done, I really appreciate any help I can get!!
Thank you in advance,
Roy

<?php
If you see this text in your browser, PHP is not configured correctly on this hosting provider.
Contact your hosting provider regarding PHP configuration for your site.
PHP file generated by Adobe Muse CC 2014.1.6
function formthrottle_check()
    if (!function_exists("sqlite_open"))
        return '1';
    $retCode ='5';
    if ($db = @sqlite_open('muse-throttle-db', 0666, $sqliteerror))
        $res = @sqlite_query($db, "SELECT 1 FROM sqlite_master WHERE type='table' AND name='Submission_History';", $sqliteerror);
        if ($res == null or @sqlite_num_rows($res) == 0 or @sqlite_fetch_single($res) != 1)
            $created = @sqlite_exec($db, "CREATE TABLE Submission_History (IP VARCHAR(39), Submission_Date TIMESTAMP)", $sqliteerror);
            if($created)
                @sqlite_exec($db, "INSERT INTO Submission_History (IP,Submission_Date) VALUES ('256.256.256.256', DATETIME('now'))", $sqliteerror);
            else
                $retCode = '2';
        if($retCode == '5')
            $res = @sqlite_query($db, "SELECT COUNT(1) FROM Submission_History;", $sqliteerror);
            if ($res != null and @sqlite_num_rows($res) > 0 and @sqlite_fetch_single($res) > 0)
                $retCode = '0';
            else
                $retCode = '3';
        @sqlite_close($db);
    else
        $retCode = '4';
    return $retCode;
function formthrottle_too_many_submissions($ip)
    $tooManySubmissions = false;
    if (function_exists("sqlite_open") and $db = @sqlite_open('muse-throttle-db', 0666, $sqliteerror))
        $ip = @sqlite_escape_string($ip);
        @sqlite_exec($db, "DELETE FROM Submission_History WHERE Submission_Date < DATETIME('now','-2 hours')", $sqliteerror);
        @sqlite_exec($db, "INSERT INTO Submission_History (IP,Submission_Date) VALUES ('$ip', DATETIME('now'))", $sqliteerror);
        $res = @sqlite_query($db, "SELECT COUNT(1) FROM Submission_History WHERE IP = '$ip';", $sqliteerror);
        if (@sqlite_num_rows($res) > 0 and @sqlite_fetch_single($res) > 25)
            $tooManySubmissions = true;
        @sqlite_close($db);
    return $tooManySubmissions;
?>

Is it possible to make an iframe full size to the browser inside muse , if using insert htm

using iframe code , it is coming in a small box want to use it to full browser

Hi,
You can use :
<iframe src="enter page link here" style="position:fixed; top:0px; left:0px; bottom:0px; right:0px; width:100%; height:100%; border:none; margin:0; padding:0; overflow:hidden; z-index:999999;">
Your browser doesn't support IFrames
</iframe>`
Enjoy working with MUSE !
Thanks
Prabhakar Kumar

Is it possible to import the website I completed in Muse from the ftp server back into Muse?

I have lost the Muse files for my site (due to a stolen laptop). Is it possible to download the site files from my ftp server and import the files back into Muse (without having to rebuild the entire site)? My site is hosted by GoDaddy cPanel, and I am running Windows 7 on my (new) laptop. Bumming out here and could use some help. Thanks!

Yes, go to your GoDaddy control panel and somewhere there will be a download your HTML button.

Socket communication between browser-server-browser

hi,
I need to connect the browser to the internet via one proxy server.
My proxy server is working fine.
I am able to send request from browser to the proxy server and able to get back the response from the server.
But the problem is sending back the response from the server to the browser.
i tried using printstream to write in the browser but it is not working.
can anyone help me in this?
thanks a lot

hi
The datas received from the proxy server is correct only.
The following is the code i used to send the data back to the browser
public void GetResponse()
          try
               FileOutputStream fos1 = new FileOutputStream("res.txt");
               while((ch1 = in.readByte()) != -1)
                    //System.out.print((char)ch1);
                    fos1.write(ch1);
               }//endofwhile*/
          sendResponse();
          }catch(Exception ert1){System.out.println("hi"+ert1.toString());}
     public void sendResponse()throws Exception
          FileInputStream fin1 = new FileInputStream("res.txt");
          int c1 =0;
               while((c1=fin1.read())!= -1)
                    nos.writeByte(c1);
               //     System.out.print((char)c1);
}

Solution to using Site Root with Sub-folders on Testing Server & Browser Previews

Hi Everyone
Have found an elegant solution when using Site Root relative linking for a website, that allows browser previews, even when the testing server uses sub-folders and the live code references just the server site root " / " of the live server and not the sub-folder structure of the testing server. This is really useful when you don't want to use document relative linking, which normally takes care of this problem in Dreamweaver.
The solution is to use sub-domains referencing the sub-folders on the testing server, so the sub-folders appear as the root of each website and the html code pointing to the site root works correctly on both testing & live servers without alteration.
Testing Server Setup
One testing server domain is used for all client development work:
For example: www.testingserver.com
On the testing server there are multiple sub-folder (one for each client website being developed):
For example: www.testingserver.com/clientA/ , www.testingserver.com/clientB/ , www.testingserver.com/clientC/
Live Server Setup
The site code needs to be developed with the final live server folder structure (url references) in mind:
For example: www.livesite.com (with all pages referencing the root of the live site server)
Page URLs on Testing & Live Servers
/page-name.html
Testing server url: www.testingserver.com/clientA/page-name.html
Live server url: www.livesite.com/page-name.html (without /clientA/ sub-folder)
Browser Previews Don't Work
You want to be able to run browser previews on the testing server while developing the website. To do this you normally have to reference the sub-folder structure of the testing server in the url for things to work right:
For example www.testingserver.com/clientA/page-name.html
What do you do, when you can't keep switching all the urls in the code from pointing to the sub-folder to pointing to the site root, and you don't want to use document relative linking?
One Solution - Sub-domains on Testing Server
In your domain hosting (outside of Dreamweaver) setup a sub-domain to point to the testing server sub-folder.
For example: Sub-domain clientA.testingserver.com points to www.testingserver.com/clientA (sub-folder)
So now when you reference the sub-domain it sees the sub-folder as the site root and all your problems are solved.
Dreamweaver Site Definition Setup
Site Definition under "Local Info"
Links relative to: Site Root
Site Definition under "Remote Info" (live server)
Access: FTP
FTP host: ftp.livesite.com
Host directory: /
Site Definition under "Testing Server"
Access: FTP
FTP host: clientA.testingserver.com
Host directory: /
URL prefix: http://clientA.testingserver.com
(location of the site's root folder on the testing server, the sub-domain redirection takes care of pointing to the sub-folder)
This is just one solution but it works well for me as it doesn't have any cost associated with it under our hosting package where you can have multiple sub-domains setup.
Hope this helps someone in a similar situation.
Aly

Just Google it, or run out and buy a copy of David Powers' Foundations Dreamweaver CS4 with CSS, Ajax and PHP, a book that is never out of reach for me. He details the process explicitly for both Mac and PC.
For me, on W7, I edit the C:/Windows/System32/drivers/etc/hosts file, and add the ip of my testing server along with the site alias -
192.168.1.82 site.local
Then I add this same designation to my httpd.conf file in Apache on the testing server. Finally I restart Apache.
Now from my production machine if I browse to "http://site.local", I get to see either the default file in the root of the site on the testing server, or a directory of the site on the testing server (my testing server is a unix box running on my LAN at that ip address). Furthermore, all of my root relative links now work as they would if the pages were being browsed from the live server.

Server/browser requirements for WebHelp output files

What are the UNIX server and browser requirements in order to
display a WebHelp project output file correctly?
When I generate the primary layout, I am not selecting 508
format, and I select Java Applet as the preferred method for the
Navigation Pane (checking the radio button for DHTML > Java
Applet > Pure HTML as the order of preference.
When viewing the help project on the UNIX server through
Mozilla, the page appears to load and reload, load and reload.
Sometims pressing Esc. stops it and you can view the TOC and
content pane. The way around this is to generate Pure HTML only,
but then the index and the glossary become very difficult to use.
Robohelp Webhelp descriptions claim to work on all platforms
and in all browser types. What requirement are we missing on our
UNIX server so the project can display correctly?
Thanks in advance for your time and trouble. :-)

Hi GEWB,
Here are some more details--
Generate Webhelp output setup:
Use lowercase filenames (recomm. for UNIX)
Toolbar buttons: Content, Index, Search
Navigation: Add breadcrumbs links
Additional options: Enable Highlight Search results, Synchronize TOC automatically
Navigation Pane preferred format: DHTML > Java Applet > Pure HTML
Optimize speed for: Web site
Q: how are you setting up your Linux to open the default project page?
A: I use Linux only to launch the webehelp output.
Q: Are you opening the GENERATED project default page or trying to open the project source files?
A: I am trying to open the generated project default page. I copy the Webhelp folder to a Linux machine and launch the index.html page to see the output.
Q: Why are you replacing the foreward-backward slash?
A: In Linux '\' is not supported for hyperlinks/filepaths. Therefore I changed the backward slashes to forward slashes.
The scenario:
When the project files have filepath such as ../../doc/xyz/,
when I view in Windows (IE)- I can access the link
when I view in Linux (FF)- I see broken link with error message somewhat like "cannot find ..\..\doc\xyz\". (Note the changed usage of slash)
This indicates that the generated files changes the forward slash to backward.

Animation works in browser preview, muse browser preview but not when live in Chrome!

I have an Edge animation that worked fine in Chrome, Safari and IE.
The last time I published my Muse site (To BC) again (since update to CC2014) it no longer worked in Chrome!
Preview in browser (Chrome) from edge works, preview in browser (Chrome) from Muse works, publish and it doesn't work in Chrome (but does in Safari and IE).
Have been trawling for possibilities but I'm not that web techy! Any help would be appreciated

Here are some screen shots.
This is Safari with the edge animation in the top rectangle:
I tried putting a graphic underneath in Muse so that at least with edge not working in Chrome, nor showing the poster frame, there would be something there as shown here:
However this did not work in Chrome so I simply see the stage BG colour with no animation as shown here:
I have made sure that the stage action is set to play the animation - it is nothing more than simple text and rectangles moving in, and then a video (the same px size as the stage) coming in a the end.

Cannot Connect to SQLServer 2014, Cannot start SQL Server Browser

I have SQLServer 2014 Developer Installed I am trying to connect to it from a .aspx page. I get error 26 "server was not found or was not accessible............". Thus is all being done on a local machine using IIS 8.5.
<add key="ConnectionString" value="server=DONSR\sqlserverexpress;Trusted_Connection=False;database=PLF;UID=sa;PWD=cool4309" />
In the SGL 2014 configuration module. Everything is enabled including TCP/IP, EXCEPT the SQL Browser. When I try to enable it I get "This service cannot be stated, either, because it is disabledor
because it has no enable devices with it [ox80070422]"

Hello,
You said that you are trying to connect from an ASPX page. which I assume it is hosted on a remote server (not on the sql box)
There are two possible problems
1 - TCP/IP disabled
http://msdn.microsoft.com/en-us/library/ms191294.aspx
2 - Windows firewall on the SQL box blocking TCP Port 1433 (I believe this is what is happening to you)
To confirm if this is the case, from a remote computer try to connect using Telnet to the port 1433
TELNET SQL_SERVER_NAME 1433
If this is the case you have to configure windows firewall to allow incoming connections to this port
Regards
Javier Villegas |
@javier_vill | http://sql-javier-villegas.blogspot.com/
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

Why is FF 15 the only browser Adobe Muse seems to have issues with?

For some reason you get a blank page when you click on "Resume PDF" Works on every other browser. Adobe says the error is on FF's end. Help?

Works for me on Windows 7. I know that some Mac users have problems with the Adobe Acrobat plugin and need to disable it so that Apple's own plugin/reader handle handle the content.

Server, browser or Muse?

Similar Messages

Maybe you are looking for