"Server Busy" Error Help

Every time I try to install CS4 Photoshop, though having all the right files, gives me a "Server Busy" error, saying there's another part BUSY, and I have to click "Switch To" to end it, but when I do, it keeps popping up the message. Help please!

HI Debnilay,
Check that Webserver is up and running, in case of windows Check IIS services, restart if necesary, also check ITS services and AICOR and restart if necesary.
Hope this help!
Juan
Please reward points if helpful

Similar Messages

"Server Busy" Error in Windows 8.1

Since yesterday, I have been unable to use Dreamweaver due to a "Server Busy" error coming up when I start the program. I have installed the available update through CC and am still etting the error, and all documentation on said error is for earlier versions of Dreamweaver and Windows.
I am unable to use the program and need a resolution to this as quickly as possible. Any help would be appreciated.
Thank you.

I believe I have found the solution. I uninstalled Norton Anti-Virus (after it said to have failed the latest update) and now the error is gone.
Norton came pre-installed on my laptop, yet the two programs had no problem until last week.

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

"Server Busy" Error in Lightroom 4.1. 4.4 won't download/open properly

When I try to import new photos I get a "server busy" error in Lightroom 4.1. I have to click cancel/reset/cancel/reset for about a minute to get just one photo to import. Completely unacceptable if trying to import multiple photos. I downloaded 4.4 most recently in hopes of fixing this buy, but although it downloads, once downloading Lightroom, hoping when I re-installed it would automatically accept updates, but that didn't work. I still get server busy error. My Lightroom is completely useless right now. I'm working off a Windows system.

OMG... I'm such a nit-wit!! I switched the setting in my camera to try something and forgot to swith it back!
I've been digging through this for more that an hour and never bothered to check the file setting.
Thanks for the suggestion!

Crystal Reports Server XI - Error: Help

Post Author: Robert
CA Forum: General
Hey Guys,
Error is to do with dynamic parameters and info view (and cms)
When i run a report with dynamic parameters it will prompt me to select the parameters i want, but when i click ok i get this error:
Unknown Error in Prompt Engine !! and the report is no more
Im under pressure to get this working again, any help most greatly appreciated.
Robert

Post Author: krishna.moorthi
CA Forum: General
Hi,
I am new in Crystal Report Server XI .
I am facing the problem to passing dyamic parameters and connection information to the report in the ASP.Net and C# environment.
can u give me the tips for dynamic passing parameters and connection to the report?
waiting for your reply.
thanks in advance

RH8 evaluation - Server Busy error when trying to import Word document

Hi,
I downloaded RH8 trial version. When I try to import a Word document (that RH7 imports with no problem", I get a
This action cannot be completed because the other program is busy. Choose 'Switch To' error message.
It opens the Windows start menu but I can't really switch to anything.
The Word file is not open.
I asked someone else to download and try the same thing and they got the same result.
Any idea how to solve this problem?
Is there a patch that fixes it? Known problems with specific features in Word?
Thanks.

Hi Gary Jiang,
Thanks for posting in MSDN forum.
This forum is for developers discussing issues about
apps for Office.
Based on the description, it seems that you got an issue when you deploy the code sample. If I understood clearly, I suggest that you contact the author of the code sample from the "Q and A" tab.
Also if you have the question about WOPI, I suggest that you get more effective response from
Office
Protocols forum.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Server Busy" error in Crystal Reports XI when using date picker

Hi,
I have come across an issue whereby I get a error pop up when using the date picker to select a date parameter as I run a report from within Crystal Report XI on a particular PC. While I am able to type in the date using the yyyy-mm-dd format, selecting the date picker displays an error message titled "Server Error" stating that the program is not responding and giving options "Switch To" and "Retry". Selecting either button displays the same error message and need to kill the application from the Task Manager to restart.
I have run the same report from other PCs (including using the date picker to pick a date parameter) without the error popping up. All of the PCs have the same version of the application.
Has anyone come across this and how were you able to resolve it?

yes test is a formula that i used to calculate a difference
that should work, but i would put () around the
(if(remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)>0 and
remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)<1) then
truncate(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}))+1
else ({ztrptActVol.CPT}*{tlkpBblMileage.CPT})
rounding in crystal is a pain in the &&

Switched scanner from Windows XP to Windows 8.1 I now get Server Busy error whenver I try to scan.

My subject header pretty much says it all. If anyone knows of a work around I would really appreciate it. I researced for quite a while yesterday and couldn't really find any good answer. It is specifically giving me this error message when I try to do Scan to Vector if that helps anyone. Thanks in advance.

After changing the BackupDrive=D: , I am able to take backup of D drive only , but I want to take all the local drives backup before installing windows 8.1
please suggest .
Shailendra Dev

DW CC 2014 Server Busy

Every time I launch DW CC 2014 on my Windows 8.1 machine I keep getting a Server Busy message where I can switch to the application or try again. Eventually it goes away but it really delays the start up time on my DW application. I have added DW to the trusted applications list for Kaspersky so I don't think that is the issue. Never had this problem with the previous version of DW CC. Anybody else running into this?

Any update on this?! I've been through seven Customer Service calls/chats and still nothing has helped. I'm getting quite frustrated.
Fifth or Sixth time I'm dealing with this issue. Still a major issue as it impacts my business. 95% of the time I start up Dreamweaver CC I get an error message that tells me "Server Busy" error message.
I've done all of the following:
Restarted.
Cleared My Recent Documents.
Used Adobe Cleaner Tool to uninstall and then re-install the app.
Turned off AVG
Turned off my Windows Firewall
Shared my screen with three tech support people with zero success.
I do have a local Admin account created and launching the app from there "sometimes" works, but I should't have to go to another account/user to launch this one app.
I've probably done a lot more but can't remember because there's been SO much work I've had to do to make this app work. WAY more than I should when paying for a service.
Why this app? And why is this being so incredibly difficult? I'm paying for a subscription and I can't use an app that is vital to my business. I'm getting tired of this and I need it fixed ASAP!
Seven, now eight times is too many. WAY too many.

Server Busy on startup

i have checked the forums here and google and I cannot figure
out why I am getting the dreaded Server Busy error when starting
Dreamweaver. If I wait for about 1 minute and press the retry
button it will open up. I just started getting the error 3 days
ago.
To try and fix it thus far I have removed all of the remote
servers for my 20+ websites setting them to none. I have
uninstalled CS3 and reinstalled it and I have restored back to a
previous state from 1 month ago using system restore.
Some facts about my laptop: HP with intel duo core running XP
Media Center SP2. NO firewall or virus protection. And no I do not
have any little critters that I can tell(no weird services running
or anything). I do not have IIS running as I am running XP Media
Center. I have XP Pro but have not installed it.
Any help?
This is really getting annoying...

figured it out. I cleared my windows recent documents and the
problem with Dreamweaver and the slowness with photoshop cleared
up.
For those that might stumble across this in the future right
click on the start button and select properties. Click the
customize button next to the start menu selection. Click on the
advanced tab. Click on the clear list button...
M.

Server busy issue since i joined Creative Cloud

I had Lightroom 5 and then joined creative cloud and have been having issues ever since i signed up. Every time i start lightroom i get a server busy error for hours on end.

A fix to Lightroom's “Server Busy Error” on a Windows 7 64 bit computer:
I see in the discussion threads there are a LOT of frustrated people over this Server Busy issue, so I hope this helps someone. This is what Adobe tech support had me do, which fixed my problem. I got through on the phone right away, and the fix took no longer than 20 minutes to determine, with the support person remoting into my computer.
I already had Lightroom 5.6 installed through my Creative Cloud subscription, and it had worked for a few weeks for me, although with increasing problems with the Server Busy box popping up. I was able to get rid of it by switching to Switch and Retry, but eventually it locked me out entirely.
Tech Support told me the problem was a permissions issue.
Try the following and see if it solves your problem:
In C:\Program Files (x86)\Common Files\Adobe, find the SL Cache folder and move it to your Desktop.
In C:\ProgramData\Adobe, find the SL Store folder and move it to your Desktop.
R Click on your Lightroom icon and “Run as Administrator”.
If it opens correctly, that shows it is working now.
Close Lightroom and reopen the application normally.
Refer to:
Error Message Server Busy During Startup
Error on the activation server
Re: Server Busy - Lightroom locked up
Regards
Rajshree

Server busy issue

I know I seen this in the groups but why do I get server busy sometimes and
have to keep pressing retry all the time?

A fix to Lightroom's “Server Busy Error” on a Windows 7 64 bit computer:
I see in the discussion threads there are a LOT of frustrated people over this Server Busy issue, so I hope this helps someone. This is what Adobe tech support had me do, which fixed my problem. I got through on the phone right away, and the fix took no longer than 20 minutes to determine, with the support person remoting into my computer.
I already had Lightroom 5.6 installed through my Creative Cloud subscription, and it had worked for a few weeks for me, although with increasing problems with the Server Busy box popping up. I was able to get rid of it by switching to Switch and Retry, but eventually it locked me out entirely.
Tech Support told me the problem was a permissions issue.
Try the following and see if it solves your problem:
In C:\Program Files (x86)\Common Files\Adobe, find the SL Cache folder and move it to your Desktop.
In C:\ProgramData\Adobe, find the SL Store folder and move it to your Desktop.
R Click on your Lightroom icon and “Run as Administrator”.
If it opens correctly, that shows it is working now.
Close Lightroom and reopen the application normally.
Refer to:
Error Message Server Busy During Startup
Error on the activation server
Re: Server Busy - Lightroom locked up
Regards
Rajshree

Server busy in Lightroom 5.7

Hi there,
I am using Lightroom 5.7 and I am continously getting Server Busy error. I am on Windows 7 platform.
I have asked this question before as well on this forum but haven't received any reply yet. My work is totally held up can someone please help to fix it.
Thanks
Rohit

Hi Keith,
The error message in the dialogue box says "This action cannot be completed because the other program is busy. Choose switch To to activate the busy program and correct the problem" . Now if I click on switch to button it just opens my start menus and pressing retry doesn't do anything. I do not even know what busy program it is refereeing to. I searched on the net and in some forums people said that switching off Windows search fix the issue I did that but it didn't work.
Rohit

Error "Server busy" at the time of launching Crystal Report 2008

Hi
I have installed Crystal Report 2008 from CD .While launching the Crystal Report I am facing the error as "Server Busy".Below are the thing which I have tried:
1)Unchecked the option "Checked for updates" in help menu
2)Uninstalled the application manually and again I have installed.
3)I have tried installing on another machine however I am facing the same error message.
My Computer's RAM size is 1.97 GB.
Any help would be appreciated.
Regards
Ashu.
Edited by: Ashu User on Aug 13, 2008 11:14 AM

Hi Ashu
Please make sure the below information:
1. If you are getting this eror message while opening Crystal Reports 2008 or Xcelsius 2008.
2. If you are getting this error message for Crystal 2008, have you installed the Crystal Reports on a Citrix Server or a Terminal Server.
3. Search if the Citrix/Terminal Server that you are using is supported or not.(You can check in the CR 2008 Supported Platforms PDF).
Hope this helps!!!
Regards
Sourashree
Edited by: Sourashree Ghosh on Aug 13, 2008 1:45 PM

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

"Server Busy" Error Help

Similar Messages

Maybe you are looking for