Server busy message

Everytime I turn on my computer, I get a little message saying that my "server is busy", with an option to "switch to..." and "retry". If I click "Switch to", the message goes away. Although this is only a small issue, it is recurring and I think it may be causing other problems with my broadband.
Any help would be appreciated.

Hello wyeowye and welcome to the Forums,
It's slightly outside the scope of these forums as this isn't a BT Broadband related problem, but hey ho. First things first, have you got Anti-virus protection and run a full scan recently? If you haven't I suggest you download one of the following, but not both
BT provide Netprotect plus:
http://www.bt.com/netprotectplus
Microsoft provide Microsoft Security essentials:
http://www.microsoft.com/en-gb/security_essentials/default.aspx
If you are running Anti-virus and know you are clean, then have a look in Startu:
(Click in the bottom left on the start button-> Programs-> Startup). Make sure you recognise everything in there. If not get rid.
You need to look at the other programs or services which are running on startup as something isn't right. There is a good Free program called CCleaner which is available from:
http://www.piriform.com/
Install it, (taking care not to install the Google "freebies" along the way), start it up and then click on the Tools-> Startup Tab. Here you can disable/enable Startup processes. Some of the things will be obvious, some not so. I suggest you have a play, which may involve many reboots until you disable the rogue process.
I am not affilianted with any of the organisations which I have provided links to. Hope this helps,

Similar Messages

I keep getting Server Busy Messages when opening CC programs

Ever since the latest iteration, I've been getting Server Busy messages when opening programs in the CC. They can be gotten around, but are annoying. Is this a new bug?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some of the steps such as changing browser and turning off your firewall for downloads

Redirecting Server busy message in Iplanet Application Server 6.5

Hi,
we are using iplanet application server 6.5 MU7. In the part of maintance activities we are planning to add server busy page in the server. Will any one can give inputs for adding server busy page in appserver with out touching the application code.
Can anyone suggest the configuration parameters available in iplanet application server to add server busy page.
thanks
talls

Hello,
I'm facing the same problem when opening a workbook Excel from BEx Browser, did you solve your issue?
Thanks,
Alberto

Get a 'Server Busy' message pretty much every time I start Lightroom

This is my Lightroom setup - pretty much every time I start Lightroom, I get the screen below;
Lightroom version: 5.7.1 [994254]
License type: Creative Cloud
Operating system: Windows 7 Business Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 2.9 GHz
Built-in memory: 7127.1 MB
Real memory available to Lightroom: 7127.1 MB
Real memory used by Lightroom: 639.7 MB (8.9%)
Virtual memory used by Lightroom: 608.8 MB
Memory cache size: 86.3 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1440x900, 2) 1280x1024
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7.1
Library Path: C:\Users\Desktop\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
Settings Folder: C:\Users\Desktop\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) Flickr
2) HDR Efex Pro 2
3) Nikon Tether Plugin
4) Perfect Effects 8
Config.lua flags: None
Adapter #1: Vendor : 10de
    Device : dc4
    Subsystem : 23601462
    Revision : a1
    Video Memory : 977
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 3524
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: NVIDIA GeForce GTS 450
ShaderModel: 11.1
Vendor: Nvidia
VendorID: 4318
Version: 10de:0dc4:23601462:00a1
What does this mean and how can it be stopped?

No reply? No fix? I have the same annoying issue and its persistent. I has rendered LR totally unusable. WTF is going on? Force quit --> Re-open --> Same error --> Force quit --> etc.

Dreamweaver CS4 - Server Busy Problem

I purchased Adobe Suite CS4
several years ago, received a serial number, and successfully installed
all of the Adobe programs.
All of a sudden, when I click the
Dreamweaver CS4 shortcut, the
Dreamweaver background appears, with a "Server Busy" box, with the
error message "action cannot be
completed because the other
program is busy,
choose Switch or Retry". Retry
doesn't do anything, and "Switch To"displays the start menu.
I switched to Dreamweaver CS4 from the
all programs list, and Dreamweaver appears
without the "Server Busy" message, but then it reappears when
I attempt to set the site root folder.
I notice that there are two
Dreamweaver buttons at the bottom task bar (and that there are two
Dreamweaver programs in the task manager), but neither button functions
when I click on each one to try to close it. Deleting one or the other
from the task bar doesn't eliminate the error message.
In addition, Photoshop CS4 stalls
when it is trying to locate plug-ins. However, Flash and Illustrator do
execute properly.
Can anyone me advise how to solve this
problem?
Thanks,
Stuart Braun
[email protected]

Hi NewOrleans99,
If both DW and PS are giving you problems, I suggest that you verify whether your system requirements meet the demands of these software.
Thanks,
Preran

DW CC 2014 Server Busy

Every time I launch DW CC 2014 on my Windows 8.1 machine I keep getting a Server Busy message where I can switch to the application or try again. Eventually it goes away but it really delays the start up time on my DW application. I have added DW to the trusted applications list for Kaspersky so I don't think that is the issue. Never had this problem with the previous version of DW CC. Anybody else running into this?

Any update on this?! I've been through seven Customer Service calls/chats and still nothing has helped. I'm getting quite frustrated.
Fifth or Sixth time I'm dealing with this issue. Still a major issue as it impacts my business. 95% of the time I start up Dreamweaver CC I get an error message that tells me "Server Busy" error message.
I've done all of the following:
Restarted.
Cleared My Recent Documents.
Used Adobe Cleaner Tool to uninstall and then re-install the app.
Turned off AVG
Turned off my Windows Firewall
Shared my screen with three tech support people with zero success.
I do have a local Admin account created and launching the app from there "sometimes" works, but I should't have to go to another account/user to launch this one app.
I've probably done a lot more but can't remember because there's been SO much work I've had to do to make this app work. WAY more than I should when paying for a service.
Why this app? And why is this being so incredibly difficult? I'm paying for a subscription and I can't use an app that is vital to my business. I'm getting tired of this and I need it fixed ASAP!
Seven, now eight times is too many. WAY too many.

Server busy (100% of the time)

Why do I keep getting server busy message upon deleteing/viewing recordings? I tried it on IE 9, Firefox, Google Chrome and Safari all with same issue.

It's not your browser! Although some Vz reps will say it is, just to get rid of you.
Almost all of us are meeting with the
Warning
We're sorry. The server is temporarily busy. Please try again later.
messages most or all of the time. Mine often freezes up even before I try to execute a function... the
Warning
We're sorry. The server is temporarily busy. Please try again later.
is as far as I've ever gotten these past few weeks though. Verizon simply hasn't assigned enough capacity and bandwidth to the Home Monitoring & Contol function. Because new users won't know this until after they've signed up and paid the fees.

'server is busy' message blocks all use

In my Lightroom 2.7 suddenly I often get the following message (free translation from Dutch):
''Server is busy.
This action cannot be completed because the other program is occupied. Click on Activate to switch to this program and solve the problem.''
The options are Activate (opens Windows Vista startup menu), Try again (does nothing) and the option Cancel (greyed out). It is impossible to shut down this message and Lightroom cannot be reached as long as the message window is still open. The only way is to shut down the program the hard way.
I have no clue what 'the other program' can be. I have the feeling that maybe some other process is blocking access to disk (backup, desktop search, ...?)
how can I find out wich program is causing the problem?
How can I close thes message window?

I posted this in http://forums.adobe.com/message/3289580#3289580
I've found "the" solution.
Windows Vista Ultimate 32bit. (it should work for any version, Vista, and 7)
I tried turning off windows search and superfetch.
That didn't work for me,
I tried disabling the windows search, and superfetch
I tried deleting the catalog and creating a new one.
I tried uninstalling and reinstalling
Nothing.
Same thing, Server busy, and when you click on switch to it opens the start menu.
You have to disable the two. Windows Search, and Superfetch.
1st turn them off under Administrator, Services
Right click and click disable.
Then right click and click on properties.
In the drop down named Startup Type: move it to disabled.
Repeat for Superfetch.
Then reboot into safemode.
Open Lightroom there, either 3.2 or 3.3rc3
Create a new catalog, import a photo, try to print.
You won't be able to print but it will keep that action.
Reboot into windows normally.
Open the program, and there you go. It will be functioning normally.
The problem seems to be that the catalog gets corrupted and the program can't open, even if you delete the catalog there is a remnant that stays with the program.
You most likely do not have to try to print, but it worked for me.
Let me know if this solves it for you.
Thanks guys!

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Error "Server busy" at the time of launching Crystal Report 2008

Hi
I have installed Crystal Report 2008 from CD .While launching the Crystal Report I am facing the error as "Server Busy".Below are the thing which I have tried:
1)Unchecked the option "Checked for updates" in help menu
2)Uninstalled the application manually and again I have installed.
3)I have tried installing on another machine however I am facing the same error message.
My Computer's RAM size is 1.97 GB.
Any help would be appreciated.
Regards
Ashu.
Edited by: Ashu User on Aug 13, 2008 11:14 AM

Hi Ashu
Please make sure the below information:
1. If you are getting this eror message while opening Crystal Reports 2008 or Xcelsius 2008.
2. If you are getting this error message for Crystal 2008, have you installed the Crystal Reports on a Citrix Server or a Terminal Server.
3. Search if the Citrix/Terminal Server that you are using is supported or not.(You can check in the CR 2008 Supported Platforms PDF).
Hope this helps!!!
Regards
Sourashree
Edited by: Sourashree Ghosh on Aug 13, 2008 1:45 PM

How to redirect to a server busy page when under heavy load

Hello,
          I have been doing extensive load testing of a web application using Weblogic
          5.10 sp 06. I have found a point where under extremly heavy load the server
          just does not respond anymore. Fair enough.
          What I want to do is at a certain load level (before it stops responding) I
          want to redirect users to a "Server Busy - try again later" page. Is there a
          setting in weblogic that allows me to do this ? Or do I need to have other
          monitoring software to take care of this ?
          Thanks and Regards,
          Nick H


Cameron Purdy <[email protected]> wrote:
          > Hi Nick,
          > Unfortunately, last I check there was no such processing. Weblogic maintains
          > a big (2^16) queue that it puts requests into and (if I remember correctly)
          > it doesn't gracefully handle overflow. I believe the architecture should
          > have been a smaller queue with the overflow condition being
          > protocol-specific (such as HTTP doing a "too busy" error).
          It is possible to create and use your own execute queue in 6.1 and specify it's
          length, so I expected this to happen when queue length reaches this number, but
          it didn't.
          > Peace,
          > --
          > Cameron Purdy
          > Tangosol, Inc.
          > http://www.tangosol.com
          > Tangosol: How Weblogic applications are customized
          > "NH" <[email protected]> wrote in message
          > news:[email protected]...
          >> Hello,
          >>
          >> I have been doing extensive load testing of a web application using
          > Weblogic
          >> 5.10 sp 06. I have found a point where under extremly heavy load the
          > server
          >> just does not respond anymore. Fair enough.
          >>
          >> What I want to do is at a certain load level (before it stops responding)
          > I
          >> want to redirect users to a "Server Busy - try again later" page. Is there
          > a
          >> setting in weblogic that allows me to do this ? Or do I need to have other
          >> monitoring software to take care of this ?
          >>
          >> Thanks and Regards,
          >>
          >> Nick H
          >>
          >>
          Dimitri

"Server Busy"

I've googled this problem and I can't find anything that
seems to apply to me. I'm sure it's come up here, so here is my
problem. I keep getting the error that says "Server Busy" "because
the other program is busy." I can either press the "Switch To ..."
button (which brings up the Start Button) or the "Retry" button
(which does nothing.) The issues I found from my googling involve
ZoneAlarm, IIS and/or World Wide Web Publishing Services (e.g.,
see
here). I've done as suggested to locate these in the Start
button > Settings > Control Panel > Administrative Tools
> Services, but to no avail, none of the known issues can be
found in the Services window.
Any ideas why I keep getting this annoying error? I'm all
ears.

Are you using Zone Alarm as a firewall?
Are you using a testing server on this site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"moon quaker" <[email protected]> wrote in
message
news:ef2oa8$s7v$[email protected]..
> I've googled this problem and I can't find anything that
seems to apply to
> me.
> I'm sure it's come up here, so here is my problem. I
keep getting the
> error
> that says "Server Busy" "because the other program is
busy." I can either
> press the "Switch To ..." button (which brings up the
Start Button) or the
> "Retry" button (which does nothing. The issues I found
from my googling
> involve ZoneAlarm, IIS and/or World Wide Web Publishing
Services (e.g.,
>
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16485).
I've
> done
> as suggested to locate these in the Start button >
Settings > Control
> Panel >
> Administrative Tools > Services, but to no avail,
none of the known issues
> can
> be found in the Services window.
>

I am trying to test an 810 an am getting an error in the business message

I am trying to test an 810 an am getting this error in the business message report.
Machine Info: ("Client host name")
Failed guideline.
Version: Oracle Application Server Integration B2B, Release 10.1.2, Build dev_B2B_10.1.2.3.0_SOLARIS_RELEASE.

Hi Anuj,
Thanks for responding.
Its an outbound 810. There are no internal properties in the payload. The error message report states the following
Machine Info: (oracle.lhdottie.com)
Failed guideline.
error code is AIP-51505.
There are no <Internal-Properties> in the xml payload.
Is there anything else I need to look at?
Vijay

Server Busy, Switch To...

Upon Start-Up, I get the error message 'Server Busy, Switch to..." However, most of the fixes for this involve using keyboard or mouse. They are currently inaccessible. I know it's NOT the keyboard or mouse functionality, however. How can
I start up without this error message showing. I tried starting in Safe Mode to no avail. Any suggestions would be appreciated.
Thanks, Piper

Obviously.
The subject of this thread is "How to stop "server busy" switch to message.".
Therefore, my question, which I think was pretty clear, especially related to the thread topic was "Any update on this?! I've been through seven Customer Service calls/chats and still nothing has helped."
Where's you're confusion?

"Server Busy" Error Help

Every time I try to install CS4 Photoshop, though having all the right files, gives me a "Server Busy" error, saying there's another part BUSY, and I have to click "Switch To" to end it, but when I do, it keeps popping up the message. Help please!

HI Debnilay,
Check that Webserver is up and running, in case of windows Check IIS services, restart if necesary, also check ITS services and AICOR and restart if necesary.
Hope this help!
Juan
Please reward points if helpful

Server busy message

Similar Messages

Maybe you are looking for