\\server\c$ cannot access

I got a 2003 server that I cannot 
\\server\c$ get into it
The admin$ and c$ are there. 
Server workstation and netlogon services are started
any idea?

Hi JonDoe,
I’m writing to just check in to see
if the suggestions were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have
any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Similar Messages

  • SSL VPN Failed to validate server certificate (cannot access https)

    Hi all,
    I have the next problem.
    I've configured in an UC520 a SSL VPN.
    I can access properly and I can see the labels, but I only can access urls which are http, not https:
    I can access the default ip of the uc520 (192.168.1.10) but
    When I try to get access to a secure url I get the msg: Failed to validate server certificate
    I'm trying to access a Cisco Digital Media Manager, whose url is https://pc.sumkio.local:8080
    Does the certificate of both hardware has to be the same?
    How can I add a https?
    Here is the config of the router:
    webvpn gateway SDM_WEBVPN_GATEWAY_1
    ip address 192.168.1.254 port 443 
    ssl trustpoint TP-self-signed-2977472073
    inservice
    webvpn context SDM_WEBVPN_CONTEXT_1
    secondary-color white
    title-color #CCCC66
    text-color black
    ssl authenticate verify all
    url-list "Intranet"
       heading "Corporate Intranet"
       url-text "DMM Sumkio" url-value "http://pc.sumkio.local:8080"
       url-text "Impresora" url-value "http://192.168.10.100"
       url-text "DMM" url-value "https://pc.sumkio.local:8443"
       url-text "DMM 1" url-value "http://192.168.10.10:8080"
       url-text "UC520" url-value "http://192.168.10.1"
    policy group SDM_WEBVPN_POLICY_1
       url-list "Intranet"
       mask-urls
       svc dns-server primary 192.168.10.250
       svc dns-server secondary 8.8.8.8
    default-group-policy SDM_WEBVPN_POLICY_1
    aaa authentication list sdm_vpn_xauth_ml_1
    gateway SDM_WEBVPN_GATEWAY_1
    max-users 10
    inservice
    Any help would be apreciatted.
    Thank you

    Hi, thanks for your advise.
    I'm trying to copy the certificate via cut and paste, but I'm getting a
    % Error in saving certificate: status = FAIL
    I dont know if I'm doing this right.
    I open the https page from the DMM with Mozilla Firefox, and in options I export the certificate in PEM format.
    I get a file which if I open with notepad is like
    -----BEGIN CERTIFICATE-----
    MIICOzCCAaSgAwIBAgIET7EwyzANBgkqhkiG9w0BAQUFADBhMQswCQYDVQQGEwJV
    KoZIhvcNAQEFBQADgYEAdk7n+tJi0igrTD2o7RD9ty8MLTyHN4uk8km+7DbpEy0g
    mxLY0UZswYvbj15kPdd8QbeGEdDR6SXOYePsfIRJzL0mqMON4oiUhsqAK5y2yC6R
    nqy4wWQ2fGVEYAeLpb1jGKdZWpuag/CO90NMHcMiobfBh+4eTqm7kRPTEyma6V0=
    -----END CERTIFICATE-----
    If I try to authenticate the trustpoint, I get that error.
    how can I export the certificate from the DMM?
    I think that this file is not the right file.
    and then, do I have to make some changes in
    webvpn gateway SDM_WEBVPN_GATEWAY_1?
    Should I choose the new trustpoint?
    I understand that the old trustpoint is for the outside connection, no for the LAN connection.
    Dont worry about me, answer when you can but I really need to fix this.
    Thank you so much

  • HTTP 500 - internal server error ,Cannot access content in the CMC

    Hi Friends,
    I am facing an strange behaviour in CMC application :
    when accessing the CMC content like Servers,servergroups,Authentication,users&groups etc getting error HTTP 500 - internal server error.
    So please help on this why it is occuring and where i need to debug from to resolve this error.
    Thanks,
    Suresh

    Hi Tim,
    Thanks for the inputs , but I forgot one thing to mention in the previuos tag, that the error iam getting is intermittent and once I restart the webapp server (tomcat) then Iam not facing the issue.
    Workarround :
    1.Narrowing down to which tomact service is this  error
    2.Stop tomcat
    3.restart tomcat
    issue iam facing intermittently ,So please suggest how to debug the issue?
    Thanks for your Kind Help & support!!
    Regards,
    Suresh

  • ACS 4.2.(1) build15 - replication failed with Cannot access file

    Just upgraded from 4.0 - to 4.2 then to 4.2.1 15. As you may have seen with periovous posts of mine its not been an esay ride.
    I have now managed to get it all working - backups AAA etc but for some reason i cannot get the replication to work! Its states the following...
    Within the Database Replication active log - Error OutBound database replication failed - refer to CSAuth log file.
    Other lines in the log state  its ok eg - Component logging reports was updated - being replicated to slave...
    Looking at the CSAuth log file...
    .....DBReplication thread kicked..starting sync.
    ODBC Operation failed with the folowing information: Message = [Sybase] [ODBC Driver] [Adaptive Server Anywhere] Cannot access file "D:$etworks\CiscoSecure 4.2\CSAuth\DbSyncSratch\users\users.dat~ -- Invailed argument, sqlStates=S1000, Native error = -602$
    SL:saveUserTable - execution Failed.
    Please note that the $ is a symbol that i have used because the symbol in the log is strange and i  cannot seem to be able replicate here with this text, for example $etworks - should be networks...
    Everything else seems to be working except this - any help would be great..
    Oh Merry Xmas and Happy new year to you all!
    John

    Did you find a solution?
    I have the same problem with the exact same symptoms - I can't get replication to work. The path name in the error message is missing the first letter, too.
    PS: It has nothing to do with the firewall, the replication fails even before it tries to connect to the network.
    Greetings
    Mathias Rufer

  • Windows 7 pro client cannot access folders on server 2003 domain server

    I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
    I get the following "access denied" message:
    […folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
    The user name could not be found.
    Strangely enough...
    The windows 7 client
    can open shared folders that reside on the XP clients in the domain
    All the XP clients in the domain can access the server 2003 folders
    All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
    The windows 7 client can ping the server 2003 machine and vice versa
    I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
    So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
    by a recent windows update.
    Here is what I have done/verified so far on the windows 7 client:
    In advanced sharing settings for Home/Work, Public and Domain profiles:
    network discovery is enabled
    file and print sharing is enabled
    use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
    40 -56 bit encryption is enabled
    In “gpedit.msc” Local Policies/Security Settings:
    enabled the following policies:
    Network access: Allow anonymous SID/name translation
    Network access: Let Everyone permissions apply to anonymous users
    disabled the following policies:
    Network access: Restrict anonymous access to Named Pipes and Shares
    Network access: Do not allow anonymous enumeration of SAM accounts
    Network access: Do not allow anonymous enumeration of SAM accounts and shares
    What am I missing? Are there policies on the server that need to be adjusted?
    Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
    steps should be helpful for many similar scenarios.  <o:p></o:p>
    If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
    can also choose to unmark the answer as you wish.  <o:p></o:p>
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
    problems.  <o:p></o:p>
    Thanks!<o:p></o:p>
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that.  Can someone help?
    Elaine

  • Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

    Hi,
    We are having issues with Server 2012 R2 SMB shares.
    We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
    The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
    It looks like the backup process keeps the original file in use.
    The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
    The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes. 
    I've already used Process Explorer to analyze, but there are no open file handles. 
    To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
    Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
    We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
    Anybody seen this behavior before or know what's causing it?
    The code:
    string file =
    @"\\server\share\test.txt";
    if (File.Exists(file))
    File.Copy(file, file +
    ".bak", true);
    File.WriteAllText(file,
    "Testje",
    Encoding.UTF8);
    The error:
     System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

    Hi,
    There is someone else having the same issue with yours. You could try code in the article below:
    “The process cannot access the file because it is being used by another process”
    http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
    If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

    I am in the final stages of a cross-forest migration.  Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest.  User accounts were not migrated.  The accounts in use have always
    been in the "new" forest.  One of our challenges was the large volume of data in redirected folders.  I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
    the entire users share, copying the permissions with the files.  By doing incremental robocopies, we can get a final copy done now in about six hours.  The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
    change the folder redirection policy Documents path from
    \\oldserver\users\%USERNAME% to
    \\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder.  Everything was going well until I tested the policy change.  After the folder redirection policy is updated
    and applied, the user cannot access the private Documents folder.  For example, user Chester Tester logs on as ctester.  I open Windows Explorer and click the Documents shortcut.  I see one subfolder, which is subfolder of Public Documents. 
    So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error.  Now for the kicker, if I open another Windows Explorer window and edit the address bar to
    \\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
    I'm hoping this is something really simple to fix!
    TIA

    HI Vivian,
    Thank you for your reply.  Yes, the path in Group Policy Folder Redirection Root Path was updated to
    \\NEWSERVER\users.  I had planned to point this to the distributed file system, so the first used was actually
    \\domain\dfs\users.  To simplify things I have backed off to copying to just a normal share
    \\newserver\users. 
    We are using BASIC folder redirection and we create a folder for each user under the root path. 
    We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times  (or higher) after the policy is changed.
    Grant the User exclusive right to Documents - Disabled
    Move the contents of Documents to the new location - Disabled
    Related folder settings
    Video - Follow Documents
    Music - Follow Documents
    Pictures - Follow Documents
    Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server.  The redirected Documents points to an empty folder set.  The copied folders with all user
    data are there, but folder redirection refuses to recognize the original folder.
    I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name.  For now, I just want the redirection to move from the old server to the new server properly.  I deleted
    the new My Documents folder, rebooted the user's workstation and tried again.  The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server.  The environment
    has about 1500 users with approximately 1.3TB of data in the redirected Documents folders.  OUCH!

  • How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    Screenshot of how it looks when i try to show a ms access form inside a iframe:
    http://oi58.tinypic.com/2vj4ish.jpg

  • Windows 7 Desktop synchronisation - Windows cannot access \\server\users\name\desktop

    Hi there
    My client has a laptop which won’t load the desktop when disconnected from the network. When you log on (while disconnected) you get the error
    “Windows cannot access \\server\users\name\desktop”
    Works as expected while connected to the network.
    The server is a Windows Small Business Server 2003 with active directory etc. and roaming profiles turned on. This issue does not occur on other workstations/laptops.
    When I check the Users folder on the local system drive there is not a desktop folder. I assume this is the issue although I’m not sure how you would force windows to create one or why one hasn’t been created?
    This is a brand new laptop so my initial reaction was to reset the laptop to factory state and then add the laptop back in to the domain. After this process the issue was still present!
    I guess the only thing I should mention is that this was shipped as a Home Premium laptop and was then upgraded to Professional using an upgrade key.
    I have checked Control Panel, System & Security, System, Advanced, User Profiles and the account shows as Local with Roaming Profiles greyed out.
    Any ideas?
    Martyn Fewtrell
    [email protected]
    Martyn Fewtrell TNC (IT Solutions) Ltd Email: [email protected] Web: http://www.tncit.co.uk

    Hi,
    I am just writing to check the status of this thread. Was the information provided in previous
    reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
    Regards,
    Alex Zhao
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Alex Zhao
    TechNet Community Support

  • Mail cannot access the mail server, but other email clients do.

    My web host recently had extended problems with the mail server my sites are on. Now, Mail on my iMac Intel 27 Duo says it cannot access the server. However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over.  I received no system disk for this machine when I bought it. Do I need to reinstall Mail, and if so, how?
    The info below from Connection Doctor shows it appears to be trying to access through Port 25 but I have Mail set for 587 as instructed by the hosting company. I have renamed private info in the text below.
    READ Jan 16 09:56:42.941 [kCFStreamSocketSecurityLevelNone]  -- host:mail.myemail.com -- port:25 -- socket:0x11f51aed0 -- thread:0x122c48a20
    250-servername-a41.g.webhostname.com
    250-PIPELINING
    250-SIZE 40960000
    250-ETRN
    250-STARTTLS
    250-AUTH PLAIN LOGIN
    250-AUTH=PLAIN LOGIN
    250-ENHANCEDSTATUSCODES
    250 8BITMIME

    However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over.
    Well if TB and Entourage can both send and receive but Mail can only send I can only conclude you missed something in you rechecking.  Of course with you being the only one checking you are going to make the same "mistake" and never no it.  So post the relevant POP server info for your ISP (edit out personal info and passwords of course):
    Account Info:
    Incoming Mail server:  pop server address
    User Name:             required user name POP server is looking for (censor)
    Password:              password required by POP server (censor)
    Advanced:
    Port:      995, 25, default?
    Use SSL:   yes or no
    Auth:      kind of authentication

  • Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

    I have a problem with starting the Excel Application under a particular user (service account).
    I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
    application will always use a service account to run services on the server). If I run the C# script in
    command prompt under the same user, it runs. Under the application X, which uses the exact same
    user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
    This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
    of code, it gives the following error:
    Microsoft Excel cannot access the file "...". There are several possible reasons:
    -The file name or path does not exist.
    -The file is being used by another program.
    -The workbook you are trying to save has the same name as a currently open workbook.
    I tried all the methods that I found online as follow:
    Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
    Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
    Enabled all macros in Excel application and set the Trust Center.
    Add the user to have full control on all folders that contain the Excel file.
    Under DCOM
    config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
    on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
    Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
    Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
    save the new parameters into the current file and generate a new excel file (with date attached to the
    file name). That means there is a change (save) to the original file.
    Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
    I appreciate all your help!

    I am wondering if this has anything to do with having the user log into Excel.
    In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
    users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
    Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
    well as the folders that have the Excel files.
    Please help!
    Thank you!

  • Server 2012 Local Shares - Cannot access using \\IP but works via \\localhost

    I've been stuck on this problem for the last couple of days and I can't find a solution on the internet that works.
    I have a Windows Server 2012 instance running on Amazon AWS with a public IP address. I am using it as an SCCM (System Center 2012 Configuration Manager) Server (so it is a Domain Controller also). I realize that it's probably not best practice to use a public
    IP here, but I'm in a weird position where we are not connecting any of the Clients to the actual Domain (they are Workgroup computers all around the world). The goal here is to use SCCM to deploy software packages to all of the Clients, which are not on the
    same LAN/VPN/Domain.
    This is my first time setting something up like this, so I followed this guide. I am able to get the Workgroup computers to show up in the SCCM Server Device list (via manual client install), but these Workgroup computers need access to the Server's shares
    to download the software packages. On Amazon, I opened all ports and allowed all IPs to communicate with the Server. I am able to RDP into the Server from any Workgroup computer using the IP address, but cannot access the Server's SMB shares even though I
    am attempting the connection with a Domain account with access to those shares.
    I decided to see if I can even connect to the shares locally on the Server. Logging in with an account with administrator privileges, I can access \\localhost\shares without
    a problem. But when I try to do \\X.X.X.X\shares,
    it asks for user/pass (confirming that it is able to connect) and I put in the correct credentials for the account with administrator privileges (using DOMAIN\ACCOUNT), but it continually says that the user/pass is incorrect. After I click cancel, an error
    comes up saying "Error Code 0x80004005 Unspecified Error".
    It is crazy to me that the administrator account that is logged in cannot access the local shares via the public IP address... obviously no remote computer would be able to access the shares if the Server itself cannot. I have tried disabling the firewall,
    but this makes no difference. I am able to ping the IP from the Server and I get a response.
    I have searched around the internet for a solution but nothing has worked. Here are some of the suggestions I've found (that have failed): 
    - Making sure "Client for Microsoft Networks" and "File and Printer Sharing for Microsoft Networks is installed and enabled for the Ethernet Adapter 
    - Enabling NetBIOS over TCP/IP in IPv4 properties 
    - Ensuring IPv6 is disabled 
    - Server, TCP/IP NetBIOS Helper, and Workstation (services) are all running
    Any ideas? Sorry for such a long post, just wanted to get as many details as I could. All help is appreciated. Thanks! 
    Shawn

    Hi,
    Are there any anti-virus software or other third party products running on the server? If yes, please disable them to see if it resolves the issue.
    Here is a similar thread below I suggest you refer to:
    Shared Folder Access
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c0bbbe8e-55d8-467c-bb85-2b98f122cc15/shared-folder-access?forum=winserverPN
    Best Regards,
    Amy

  • Non-admin user cannot access Essbase server level variables

    Version 11.1.1.3
    Essbase Substitution variables are created at server level. Users are getting error in FR report that uses the Subsitution Variable -- Essbase Error(1051085): You do not have sufficient access to get this substitution variable. Also, users cannot access Substitution variable in SmartView. However, users can access variables created at database level. Users are provisioned as "Server Access" to Essbase and filter access to ASO application "MGTRPTG", where MGTRPTG is an ASO essbase application for reporting. We tried the same provisioning in two other environments and it seems to be working fine.
    User is type "Essbase and Planning" provisioned with essbase "server access", application mgtrptg "filter", Reporting and Analysis "analyst", "dynamic viewer" and "Explorer". In addition, it is given a filter "REP_DME_GALB" which restricts 2 dimensions (Division and Geography).
    Steps taken to resolve:
    1. Existing users were deprovisioned and reprovisioned with no effect.
    2. Created brand new identically provisioned users in Prod and QA. QA user can access the server level var and Prod user cannot
    3. Created a brand new server level variable in Prod and this cannot be accessed.
    4. All services have already been restarted several times.
    5. SR has been opened.
    Temporary workaround:
    By creating a duplicate of the same set of variables at the database level, the reports work. This can only be a temporary workaround as the client cannot be expected to maintain two sets of substitution variables since there are 3 applications using these server level variables.
    Thank you for any ideas!
    Jennifer

    You have stumbled on a defect which is resolved in the Hyperion Planning 9.3.1 patch 6 and above. If you have your planning preferences set to indent members it will cause forms which have page selections to show as invalid in SmartView.
    You can either patch Planning or turn off the preference. The patches are available from http://metalink3.oracle.com and require account which has been associated with your client ID.
    P.S. Usually it's not a good practice to use the admin id.
    Regards,
    -John
    Edited by: Jbooth on Nov 3, 2008 2:12 PM

  • I cannot access CF10 developper built in server remotely

    Just successfully installed CF10 developper ediiton with built in server
    I can access the web pages from the dev server on
    http://localhost:8500
    or
    http://192.168.1.49:8500
    But I cannot access the pages from a remote computer on the same network
    Any suggestion would be welcome

    Such kind of locking CF server access by local dev. machine was normally done by resetting the value of
    <attribute name="interface">*</attribute> attribute
    to
    <attribute name="interface">127.0.0.1</attribute>
    of   <service class="jrun.servlet.http.WebService" name="WebService">   service of jrun.xml file but it was done till CF 9 server through this jrun.xml file attribute change.

Maybe you are looking for