Server can't find JCE

I have installed the JCE on my server, but for some reason I continue to get a NoSuchAlgorithmException. I have installed the JCE as both an extension of JDK 1.3 and also as a stand-alone application and neither seems to work. Likewise I have tried to register the provider both statically and dynamically. The system I have installed on is a Websphere 4 box and for some reason it won't recognize the JCE. Any help would be really appreciated! Thanks.

Thanks for your help! I had installed those jar files, 4 in total, in that directory on the server. For the life of me I can't figure out why it can't find the DES instance. I have it working in my Application Developer test environment and it works like a charm. Thanks again.

Similar Messages

Frequent Messages "Server Can't Find Site"

Could this be a router issue? The Network is connected via cable modem to two notebooks. I get frequent messages "server can't find site." Any ideas?

Does this happen only with certain websites? If so, you may have a DNS issue.
You can find a good guide for changing your DNS at the link below. When you type a name into your address bar like Google.com... that goes out to a DNS server which then translates it to an actual address that can get you there. For example, if you wanted to mail something to your mother, you couldn't just put "Mom" on the envelope, you would have to put the actual address there. Open DNS is one of the most common DNS servers to use. Follow the guide below... EXCEPT... in the very last part where you enter the two DNS addresses, use 208.67.222.222 & 208.667.220.220 instead:
http://www.plus.net/support/software/dns/changingdnsmac.shtml

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this when it just stopped working today?

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix the problem when it failed just today?

If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252)

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?

If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252)

Error : XDK 902b, jdk 1.3.1_02, Tomcat 3.2.3, server can't find XSQLConfig.xml

Hi xml-folks :
I am having a show stopping problem with my IBM NT server 4.0 s-pac 6 env. Error : XDK 902b with jdk 1.3.1_02 and Tomcat 3.2.3, server can't find XSQLConfig.xml file.
Components : IIS 4.0, Tomcat 3.2.3, JDK 1.3.1_02, XDK 9.0.2b
- all components were down loaded and installed from apache.org, sun.java and otn this week.
ERROR : in Internet Explorer
I type in ...
 Http://geoweb:8080/geoapp/helloworld/helloworld.xsql
I recieve ...
 Oracle XSQL Servlet Page Processor 9.0.2.0.0(Beta)
 XSQL - 003 : Failed to find 'XSQLConfig.xml' in file server CLASSPATH.
( ... seems straight forward to fix, doesn't it.)
- history IIS works, jakarta is up as a service, it's mapped as an IIS vritual directory, Tomcat serves the demo t-c JSP and Servlets from : Http://geoweb:8080/geoapp, the java env works (java, javac, jar, etc). I've done everything to try to get the CLASSPATH to recognized the XSQLConf file, jar'ed it, renamed it to zip. And of course the file still resides in my XDK home E:\xdk_java_902b\lib, I've tried that in the path too.
< nt_system_variables >
CLASSPATH=E:\Tomcat3.2.3
\lib\XSQLConfig.jar;E:\xdk_java_902b\lib\classes12.zip;E:\xdk_java_902b\lib\classgen.jar;E:\xdk_java_902b\lib\oraclexsql.jar;E:\xdk_java_902b\lib\transx.zip;E:\xdk_java_902b\lib\xmlmesg.jar;E:\xdk_java_902b\lib\xmlparserv2.jar;E:\xdk_java_902b\lib\xschema.jar;E:\xdk_java_902b\lib\xsqlserializers.jar;E:\xdk_java_902b\lib\xsu12.jar;E:\xdk_java_902b\xdk\admin
COMPUTERNAME=GEOWEB
ComSpec=C:\WINNT\system32\cmd.exe
DiskeeperIcon=C:\Program Files\Executive Software\DiskeeperServer\
HOMEDRIVE=C:
HOMEPATH=\
INCLUDE=E:\Program Files\Mts\Include
JAVA_HOME=e:\jdk1.3.1_02
LIB=E:\Program Files\Mts\Lib
LOGONSERVER=\\GEO3
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Os2LibPath=C:\WINNT\system32\os2\dll;
Path=E:\jdk1.3.1_02\bin;E:\Perl\bin\;E:\Oracle8i\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\PROGRA~1\IBM\UMS\DMI\bin;C:\Program Files\IBM\UMS;C:\WINNT\system32;C:\WINNT;E:\Program Files\Mts;C:\WINNT\System32\WBEM;C:\PROGRA~1\IBM\UMS\Director\Bin;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 10 Stepping 1, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0a01
PROMPT=$P$G
SystemDrive=C:
SystemRoot=C:\WINNT
TEMP=C:\TEMP
TMP=C:\TEMP
TOMCAT_HOME=e:\Tomcat3.2.3
UMS_DRIVE=C:
UMS_HOME=C:\Program Files\IBM\UMS
USERDOMAIN=GEO
USERNAME=GEONETADMIN
USERPROFILE=C:\WINNT\Profiles\geonetadmin
WIN32DMIPATH=C:\PROGRA~1\IBM\UMS\DMI
windir=C:\WINNT
</ nt_system_variables >
Anyone have any Ideas ?

I should have included my wrappers.properties in the original part of the thread. Here it is with the working corrections.
Once I added : wrapper.class_path=E:\xdk_java_902b\lib\XSQLConfig.jar
to my wrappers.properties file the XML-003 error went away, i.e. its working ... I can see the XSQLCOnfig.xml file now. I don't think this is the nornal way this should be fixed but literally nothing else I did worked. I tried things like adding a system variable XML_CONF=%XML_HOME%\lib and modified my CLASSPATH to simply poiint to the %TOMCAT_HOME%\lib ( where my XSQLConfig.xml file is located). those did not get this woring ... only by adding the "wrapper.class_path=E:\xdk_java_902b\lib\XSQLConfig.jar
" to my wrappers.properties file did it work.
I hope this helps people, but I do believe this is very non-standard (this isn't the way this is supposed to be working). Everything I've read by Oracle OTN, Steve M. etc. and the boards here suggest this isn't supposed to be this hard. But it was for me.
now I'm dealing with a XML-007 error, but thats very solvable, theres plenty of documentation on why your JDBC connection is failing, worse comes to worse I'll re-install the JDBC-Oracle 8i client software.
E#
# $Header: /home/cvs/jakarta-tomcat/src/etc/Attic/wrapper.properties,v 1.2.2.1 2000/10/16 01:59:22 larryi Exp $
# $Revision: 1.2.2.1 $
# $Date: 2000/10/16 01:59:22 $
# jk_service.properties - a bootstrup file for the Tomcat NT service.
# This file provides jk_nt_service with the needed information to
# start tomcat at a different process.
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them!!!
# Whenever you see a set of lines such as:
# x=value
# y=$(x)\something
# the final value for y will be value\something
# Normaly all you will need to modify is the first two properties, i.e.
# wrapper.tomcat_home and wrapper.java_home. Most of the configuration
# is derived from these two.
# wrapper.tomcat_home should point to the location where you
# installed tomcat. This is where you have your conf, webapps and lib
# directories.
wrapper.tomcat_home=E:\Tomcat3.2.3
# wrapper.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
wrapper.java_home=E:\jdk1.3.1_02
#------ ADVANCED MODE ------------------------------------------------
# Make sure that you read the how-to before making too many changes.
# Defining where the service is going to put the standard
# output of Tomcat. This is where System.out.println and
# System.err.println goes to.
wrapper.stdout=$(wrapper.tomcat_home)\logs\jvm.stdout
wrapper.stderr=$(wrapper.tomcat_home)\logs\jvm.stderr
# Additions to the path. put here directories where you store DLLs for
# native methods etc.
wrapper.ld_path=e:\
wrapper.ld_path=c:\
# Defining the classpath. All the rows that belongs to the class_path
# property are concatenated to create the classpath for Tomcat.
# If you have additional locations that you would like to add to the
# claspath you should add a new wrapper.class_path=<location> line.
wrapper.class_path=$(wrapper.tomcat_home)\classes
wrapper.class_path=$(wrapper.tomcat_home)\lib\jaxp.jar
wrapper.class_path=$(wrapper.tomcat_home)\lib\parser.jar
wrapper.class_path=$(wrapper.tomcat_home)\lib\webserver.jar
wrapper.class_path=$(wrapper.tomcat_home)\lib\servlet.jar
wrapper.class_path=$(wrapper.tomcat_home)\lib\jasper.jar
# Here we add the classes required for the xsql servlet and any
# other apps.
wrapper.class_path=E:\xdk_java_902b\lib\XSQLConfig.jar
wrapper.class_path=E:\xdk_java_902b\lib\classes12.jar
wrapper.class_path=E:\xdk_java_902b\lib\classgen.jar
wrapper.class_path=E:\xdk_java_902b\lib\oraclexsql.jar
wrapper.class_path=E:\xdk_java_902b\lib\xmlmesg.jar
wrapper.class_path=E:\xdk_java_902b\lib\xmlparserv2.jar
wrapper.class_path=E:\xdk_java_902b\lib\xschema.jar
wrapper.class_path=E:\xdk_java_902b\lib\xsqlserializers.jar
wrapper.class_path=E:\xdk_java_902b\lib\xsu12.jar
wrapper.class_path=E:\xdk_java_902b\xdk\admin
# This is where Javac is located in JDK1.3.x
wrapper.class_path=$(wrapper.java_home)\lib\tools.jar
# and a tribute to JDK1.1.x
# wrapper.class_path=$(wrapper.java_home)\lib\classes.zip
# This is the Java interpreter used for running Tomcat
wrapper.javabin=$(wrapper.java_home)\bin\java.exe
# This is Tomcat's startup class (the class that contains Tomcat's
# starting point.
wrapper.startup_class=org.apache.tomcat.startup.Tomcat
# This is the location where tomcat's server.xml configuration file
# is located.
wrapper.server_xml=$(wrapper.tomcat_home)\conf\server.xml
# The NT service uses AJP12/AJP13 to shutdown Tomcat. The
# wrapper.shutdown_port tells the service the identity of the port that
# is used by AJP12/AJP13.
wrapper.shutdown_port=8007
# Can either be ajp12 or ajp13 depending on your configuration.
# Default value is ajp12
wrapper.shutdown_protocol=ajp12
# This is the command line that is used to start Tomcat. You can add extra
# parameters to it but you can not remove anything.
wrapper.cmd_line=$(wrapper.javabin) -classpath $(wrapper.class_path) $(wrapper.startup_class) -config $(wrapper.server_xml) -home $(wrapper.tomcat_home)

8.1.6 JDBC XA on 8.1.5 server can't find JDBC_XA package

I'm using Oracle's 8.1.6 XADataSource. I'm enlisting the XAResource associated with an XAConnection with my JTA transaction manager. I'm hitting an 8.1.5 RDBMS server.
Apparently, I'm missing the PL/SQL package JAVA_XA. Can I get a .sql for it and load it into the 8.1.5 server and succeed, or do I have to get an 8.1.6 server?
Here's the error message I get at commit-time (the transaction manager (mine) is issuing an "end" to the XAResource which in turn appears to be trying to invoke JAVA_XA.XA_END via a prepared statement):
java.sql.SQLException: ORA-06550: line 1, column 14:
PLS-00201: identifier 'JAVA_XA.XA_END' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
I searched my catalog (all_source table) for this package and can't find it.

The server has to be 8.1.6 or above to
use the XA features.
<BLOCKQUOTE>quote:<HR>Originally posted by Bill Burcham ([email protected]):
I'm using Oracle's 8.1.6 XADataSource. I'm enlisting the XAResource associated with an XAConnection with my JTA transaction manager. I'm hitting an 8.1.5 RDBMS server.
Apparently, I'm missing the PL/SQL package JAVA_XA. Can I get a .sql for it and load it into the 8.1.5 server and succeed, or do I have to get an 8.1.6 server?
Here's the error message I get at commit-time (the transaction manager (mine) is issuing an "end" to the XAResource which in turn appears to be trying to invoke JAVA_XA.XA_END via a prepared statement):
java.sql.SQLException: ORA-06550: line 1, column 14:
PLS-00201: identifier 'JAVA_XA.XA_END' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
I searched my catalog (all_source table) for this package and can't find it.<HR></BLOCKQUOTE>
null

Precalc Server - can't find Workbooks

Hi guyz,
Our BASIS just configured the Precalc Server for our Production Server, however I can't see the Workbooks I have created using Analyzer 7.x. The workbooks created using 3.x before can be seen. What's the problem with our server?
My problem is related in #1 issue of this post:
http://scn.sap.com/thread/2125813
Thank you!
Loed

Hi guyz,
I can already find the workbooks created using 7.x..The problem now is when I tried to send workbook using BEx Broadcaster, I encountered this error..
Any help?
Thank you!
Loed

JES2005 Q1 Administration server can't find messaging server.

When I launch the console, I can see the messaging server, but can't open it.
When I check the administration server log files, I got a
"admin40_task_access_eval(): unable to find registered server (msg-config) " error message.
Where's the administration server searching for that msg-config ?
Waht do I have to do so that I can administrate the messaging server using that administration server ?
Thanks in advance,
Corto

Hi Corto,
I suggest you post your Messaging Server question to the Messaging Server forum:
http://swforum.sun.com/jive/forum.jspa?forumID=15
Let us know if you do not get it addressed in that forum.
Chris

Financial Reporting Web Server can't find report server.

Hi all,
I've installed Financial reporting print server, report server, and scheduler on a separate server from the Web Server installed with Workspace. I can create and run a report with FR Studio and have saved it to the Workspace server.
When I run the report on the Workspace server I get the following error:
Your Financial Reporting Web Server is unable to locate the report server server1.na.ds.monsanto.com:8299. Please contact your administrator.
(5514)
I have the same configuration on two other servers and things are working fine. How do I tell the Web Server (server1) where the report server is. Why is it looking on the server1 server?
Thanks.

Thanks for your responses.
I've run the configuration utility on the server where I have installed the report server and compared it to the report server that works. I looks like logically I have things set up correctly.
The "Configure Financial Reporting" asks me where the "Workspace Web Application" is and that is set correctly and is working because I can get into studio and connect to the report server it lets me design and run and save the report. Studio saves the report to the correct workspace server so I know FR knows about the workspace server.
I ran the config utility on the Workspace web server and selected "Configure Web Server". The second screen lists all of the components and "Financial Reporting" is one of the components. This is also set up logically identically to the server pair that is working. All of the components are set up on the web server to point at the web server.
So I still don't understand how to tell workspace to look at the report server. The report server is finding the workspaces web server just fine.
All services are up and running.
Keith

Start tuxedo server, can not find the cobol library

I run tuxedo cobol sample CSIMPSRV in linux. because I use microfocus cobol, I changed setenv:
COBCPY=$TUXDIR/cobinclude
COBDIR=/opt/microfocus/cobol
PATH=$PATH:$COBDIR/bin
APPDIR=`pwd`
TUXCONFIG=$APPDIR/tuxconfig
LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH:$TUXDIR/lib
SHLIB_PATH=$COBDIR/lib:$SHLIB_PATH:$TUXDIR/lib
LIBPATH=$COBDIR/lib:$LIBPATH:$TUXDIR/lib
export COBCPY COBDIR PATH APPDIR TUXCONFIG LD_LIBRARY_PATH SHLIB_PATH LIBPATH
it can be compiled, buildserver sucess. but I start server and got a error as below:
exec CSIMPSRV -A :
CSIMPSRV: error while loading shared libraries: libcobrts.so: cannot open shared object file: No such file or dy
I don't know why? because the libcobrts.so is in the folder "/opt/microfocus/cobol/lib" and any users can read and excute. The environment variable LD_LIBRARY_PATH, SHLIB_PATH, LIBPATH have contain this folder.
What's problem? anybody can help me?
Thanks!
Edited by: user7949714 on 2011-4-11 下午9:59

Hi,
Please check envfile which is specified in ubbconfig to make sure LD_LIBRARY_PATH is correct or not.
Sample envfile should be modifed as your environment.
Thanks,
-Masa

Content Server can't find my native document

I have inserted the default Dyanmic Conversion element into a Secondary Page Region in Site Studio. When I preview the page and try to Check out and Open the page I get this error message from MS Word.
Could not open "http://[server name]/idc/idcplg/webdav/core/tip/TESTSTYLES/teststyles
Where TESTSTYLES is the content ID and teststyles is the name of the native docuument.
Can someone please tell me what I've set up wrong and how to fix this?

So basically the checkoutandopen component needs to be loaded after folders and webdav?
I am having the same problem and have tried to uninstall (gave error message but still removed it) and then reinstalling.
I'm also seeing this error message in the content server log -
Event generated by user 'higginj_a' at host 'stellent'. Unable to execute service GET_ENVIRONMENT and function loadEnvironment.
(System Error: The column 'key' does not exist in this table.) [ Details ]
An error has occurred. The stack trace below shows more information. !csUserEventMessage,higginj_a,stellent!$!csServiceDataException,GET_ENVIRONMENT,loadEnvironment!$!csSystemError,\!syColumnDoesNotExist\,key intradoc.common.ServiceException: !csServiceDataException,GET_ENVIRONMENT,loadEnvironment!$!csSystemError,\!syColumnDoesNotExist\,key
at intradoc.server.Service.buildServiceException(Service.java:2312)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2228)
at intradoc.server.Service.createServiceException(Service.java:2223)
at intradoc.server.Service.doAction(Service.java:646)
at intradoc.server.Service.doActions(Service.java:425)
at intradoc.server.Service.doRequest(Service.java:1860)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:350)
at intradoc.server.IdcServerThread.run(Unknown Source)
Caused by: intradoc.data.DataException: !syColumnDoesNotExist,key
at intradoc.data.ResultSetUtils.createInfoList(ResultSetUtils.java:230)
at intradoc.data.ResultSetUtils.createFilteredStringTableEx(ResultSetUtils.java:111)
at intradoc.data.ResultSetUtils.createFilteredStringTable(ResultSetUtils.java:54)
at intradoc.data.ResultSetUtils.findValueEx(ResultSetUtils.java:351)
at intradoc.data.ResultSetUtils.findValue(ResultSetUtils.java:310)
at collections.HelperHandler.loadEnvironment(HelperHandler.java:876)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(Unknown Source)
at intradoc.server.ServiceHandler.executeAction(Unknown Source)
at intradoc.server.Service.doCodeEx(Service.java:674)
at intradoc.server.Service.doCode(Service.java:656)
at intradoc.server.Service.doAction(Service.java:580)
... 4 more

NI Visa Server can't find remote expansion chassis

Hi,
I have a 9149 expansion chassis with a 9871 RS485/RS232 serial module connected to it. I have installed VISA and VISA server on the expansion chassis and configured it to accept all remote requests in MAX.
However on the VISA settings for my system the chassis doesn't appear in the available systems, and when I try to create a new system and specify it by IP address I get an error pop-up stating the system is already a remote system and to configure it in VISA>>Remote. Which I can;'t do as it is not there!
Therefore, I can not access the ports in Labview when I try to open a VISA session.
Is it possible to have remote VISA access to an expansion chassis? Am I missing a step in the conifguration?
Thanks,
Neil
Neil

Hi I think this may help.
http://digital.ni.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C?OpenDocument

Messaging Server can't find local accounts

I recently upgraded to Messaging Server 3.5, and it is bouncing all
local mail. I checked the Users & Groups and all accounts still exist.
Try telnetting to the SMTP port on the mail server and confirming the
user's address; it may be unknown to the server. If the LDAP entries
for user accounts use the "cn" addtribute in the dn for the user, like
this:
dn: cn=jbarksdale

... then go to the Messaging Server admin pages, go to Server
Preferences, and choose the LDAP Routing Configuration. The "Search by
user ID (uid)" box is checked by default. Uncheck the box and restart
the Messaging Server, and this should solve the problem.

I recently upgraded to Messaging Server 3.5, and it is bouncing all
local mail. I checked the Users & Groups and all accounts still exist.
Try telnetting to the SMTP port on the mail server and confirming the
user's address; it may be unknown to the server. If the LDAP entries
for user accounts use the "cn" addtribute in the dn for the user, like
this:
dn: cn=jbarksdale

... then go to the Messaging Server admin pages, go to Server
Preferences, and choose the LDAP Routing Configuration. The "Search by
user ID (uid)" box is checked by default. Uncheck the box and restart
the Messaging Server, and this should solve the problem.

Why portal server can't create an instance of axis.Service class?

Hi,gurus,
We developed a uwl custom connector,The time out occured in that custom connector.After adding the time out value from 30s to 300s,the problem still existed.
The code is like below:
String endpoint = "http://172.16.127.4:8080/appframe-web/services/WorkItemService";
Service service = new Service(); // time out code
Call call = (Call) service.createCall();
call.setTargetEndpointAddress(endpoint);
call.setOperationName("wisForPortal");
call.addParameter("userCode", org.apache.axis.encoding.XMLType.XSD_STRING, javax.xml.rpc.ParameterMode.IN);/
call.setReturnType(org.apache.axis.encoding.XMLType.XSD_STRING);
String temp = "36";
Object result = call.invoke(new Object[]{temp});
The time out occured when the portal server create an instance of Service class.Does that mean the server can't find the jars?
But the object declaration like "Service service=null;" is all right.
Any ideas?Thanks in advance.

I have a project called 'Default EAR' in my workspace.
But I can't add the JAR to the that project. These instructions are for WSAD 4, but I assume WSAD 5 is similar:
Go to menu File and select Import. Choose "File System" to import from. Specify "Default EAR" as your folder and select the jar file from the directory/browse prompt.
This is assuming your web app is connected to Default EAR and not some other EAR file. Also once you've done this, you will find that the jar file automatically becomes part of your build path. You didn't have to do anything extra to make that happen.

Firefox can not find web pages when redirecting after initial search

my search is "Kartoffelsuppe" a list of about 20 sites is listed. When clicking on anyone of the sites a message of server can not find the site is displayed. using internet explorer the problem does not occur.
This problem exists on any query such as "hatchback cars", it will list a number of sites to review but the search returns "can not find Site"

You may have a user agent that is corrupted and that identifies you as Firefox/3.0.19
*Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19 ( .NET CLR 3.5.30729; .NET4.0E)
See:
*https://support.mozilla.com/kb/Finding+your+Firefox+version
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Server can't find JCE

Similar Messages

Maybe you are looking for